A new multicopper oxidase from Gram-positive bacterium Rhodococcus erythropolis with activity modulating methionine rich tail

Rhodococcus erythropolis ATCC 4277 behavior against different metals and its potential use in waste biomining

Rhodococcus erythropolis bacterium is known for its remarkable resistance characteristics that can be useful in several biotechnological processes, such as bioremediation. However, there is scarce knowledge concerning the behavior of this strain against different metals. This study sought to investigate the behavior of R. erythropolis ATCC 4277 against the residue of chalcopyrite and e-waste to verify both resistive capacities to the metals present in these residues and their potential use for biomining processes. These tests were carried out in a stirred tank bioreactor for 48 h, at 24ºC, pH 7.0, using a total volume of 2.0 L containing 2.5% (v/v) of a bacterial pre-culture. The pulp density of chalcopyrite was 5% (w/w), and agitation and oxygen flow rates were set to 250 rpm and 1.5 LO2 min-1, respectively. On the other hand, we utilized a waste of computer printed circuit board (WPCB) with a pulp density of 10% (w/w), agitation at 400 rpm, and an oxygen flow rate of 3.0 LO2 min-1. Metal concentration analyses post-fermentation showed that R. erythropolis ATCC 4277 was able to leach about 38% of the Cu present in the chalcopyrite residue (in ~ 24 h), and 49.5% of Fe, 42.3% of Ni, 27.4% of Al, and 15% Cu present in WPCB (in ~ 24 h). In addition, the strain survived well in the environment containing such metals, demonstrating the potential of using this bacterium for waste biomining processes as well as in other processes with these metals.

Revealing the diversity of bacteria and fungi in the active layer of permafrost at Spitsbergen island (Arctic) - Combining classical microbiology and metabarcoding for ecological and bioprospecting exploration

Arctic soils are constantly subjected to extreme environmental conditions such as low humidity, strong winds, high salinity, freeze-thaw cycles, UV exposition, and low nutrient availability, therefore, they have developed unique microbial ecosystems. These environments provide excellent opportunities to study microbial ecology and evolution within pristine (i.e. with limited anthropogenic influence) regions since the High Arctic is still considered one of the wildest and least explored environments on the planet. This environment is also of interest for the screening and recovery of unique microbial strains suitable for various biotechnological applications. In this study, a combination of culture-depended and culture-independent approaches was used to determine the cultivation bias in studies of the diversity of cold-active microorganisms. Cultivation bias is a reduction in recovered diversity, introduced when applying a classical culturing technique. Six different soil types, collected in the vicinity of the Polish Polar Station Hornsund (Spitsbergen, Norway), were tested. It was revealed that the used media allowed recovery of only 6.37 % of bacterial and 20 % of fungal genera when compared with a culture-independent approach. Moreover, it was shown that a combination of R2A and Marine Broth media recovered as much as 93.6 % of all cultivable bacterial genera detected in this study. Based on these results, a novel protocol for genome-guided bioprospecting, combining a culture-dependent approach, metabarcoding, next-generation sequencing, and genomic data reuse was developed. With this methodology, 14 psychrotolerant, multi-metal-resistant strains, including the highly promising Rhodococcus spp., were obtained. These strains, besides increased metal tolerance, have a petroleum hydrocarbon utilization capacity, and thus may be good candidates for future bioremediation technologies, also suited to permanently cold regions.

Function and versatile location of Met-rich inserts in blue oxidases involved in bacterial copper resistance

Cuproxidases form a subgroup of the blue multicopper oxidase family. They display disordered methionine-rich loops, not observable in most available crystal structures, which have been suggested to bind toxic Cu(I) ions before oxidation into less harmful Cu(II) by the core enzyme. We found that the location of the Met-rich regions is highly variable in bacterial cuproxidases, but always inserted in solvent exposed surface loops, at close proximity of the conserved T1 copper binding site. We took advantage of the large differences in loop length between cold-adapted, mesophilic and thermophilic oxidase homologs to unravel the function of the methionine-rich regions involved in copper detoxification. Using a newly developed anaerobic assay for cuprous ions, it is shown that the number of Cu(I) bound is nearly proportional to the loop lengths in these cuproxidases and to the number of potential Cu(I) ligands in these loops. In order to substantiate this relation, the longest loop in the cold-adapted oxidase was deleted, lowering bound extra Cu(I) from 9 in the wild-type enzyme to 2-3 Cu(I) in deletion mutants. These results demonstrate that methionine-rich loops behave as molecular octopus scavenging toxic cuprous ions in the periplasm and that these regions are essential components of bacterial copper resistance.

Inhibition in multicopper oxidases: a critical review

This review critiques the literature on inhibition of O₂-reduction catalysis in multicopper oxidases like laccase and bilirubin oxidase and provide recommendations for best practice when carrying out experiments and interpreting published data.

The trade-off of availability and growth inhibition through copper for the production of copper-dependent enzymes by Pichia pastoris

Background

Copper is an essential chemical element for life as it is a part of prosthetic groups of enzymes including super oxide dismutase and cytochrome c oxidase; however, it is also toxic at high concentrations. Here, we present the trade-off of copper availability and growth inhibition of a common host used for copper-dependent protein production, Pichia pastoris.

Results

At copper concentrations ranging from 0.1 mM (6.35 mg/L) to 2 mM (127 mg/L), growth rates of 0.25 h⁻¹ to 0.16 h⁻¹ were observed with copper uptake of as high as 20 mg_copper/g_CDW. The intracellular copper content was estimated by subtracting the copper adsorbed on the cell wall from the total copper concentration in the biomass. Higher copper concentrations led to stronger cell growth retardation and, at 10 mM (635 mg/L) and above, to growth inhibition. To test the determined copper concentration range for optimal recombinant protein production, a laccase gene from Aspergillus clavatus [EMBL: EAW07265.1] was cloned under the control of the constitutive glyceraldehyde-3-phosphate (GAP) dehydrogenase promoter for expression in P. pastoris. Notably, in the presence of copper, laccase expression improved the specific growth rate of P. pastoris. Although copper concentrations of 0.1 mM and 0.2 mM augmented laccase expression 4 times up to 3 U/mL compared to the control (0.75 U/mL), while higher copper concentrations resulted in reduced laccase production. An intracellular copper content between 1 and 2 mg_copper/g_CDW was sufficient for increased laccase activity. The physiology of the yeast could be excluded as a reason for the stop of laccase production at moderate copper concentrations as no flux redistribution could be observed by ¹³C-metabolic flux analysis.

Conclusion

Copper and its pivotal role to sustain cellular functions is noteworthy. However, knowledge on its cellular accumulation, availability and distribution for recombinant protein production is limited. This study attempts to address one such challenge, which revealed the fact that intracellular copper accumulation influenced laccase production and should be considered for high protein expression of copper-dependent enzymes when using P. pastoris. The results are discussed in the context of P. pastoris as a general host for copper -dependent enzyme production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-016-0251-3) contains supplementary material, which is available to authorized users.

Laccases of prokaryotic origin: enzymes at the interface of protein science and protein technology

The ubiquitous members of the multicopper oxidase family of enzymes oxidize a range of aromatic substrates such as polyphenols, methoxy-substituted phenols, amines and inorganic compounds, concomitantly with the reduction of molecular dioxygen to water. This family of enzymes can be broadly divided into two functional classes: metalloxidases and laccases. Several prokaryotic metalloxidases have been described in the last decade showing a robust activity towards metals, such as Cu(I), Fe(II) or Mn(II) and have been implicated in the metal metabolism of the corresponding microorganisms. Many laccases, with a superior efficiency for oxidation of organic compounds when compared with metals, have also been identified and characterized from prokaryotes, playing roles that more closely conform to those of intermediary metabolism. This review aims to present an update of current knowledge on prokaryotic multicopper oxidases, with a special emphasis on laccases, anticipating their enormous potential for industrial and environmental applications.

Expanding the laccase-toolbox: a laccase from Corynebacterium glutamicum with phenol coupling and cuprous oxidase activity

Laccases are oxidases with potential for application in biotechnology. Up to now only fungal laccases have been applied in technical processes, although bacterial laccases are generally easier to handle and more stable at alkaline pH values and elevated temperatures. To increase the toolbox of bacterial laccases and to broaden our knowledge about them, new enzymes have to be characterized. Within this study, we describe the new bacterial laccase CgL1 from Corynebacterium glutamicum. CgL1 was found to oxidize typical laccase substrates like 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid), syringaldazine and 2,6-dimethoxyphenol. The enzyme also demonstrates cuprous oxidase activity. Furthermore, CgL1 is active for several hours at temperatures up to 60°C and at alkaline pH, as well as stable in different organic solvents. This makes CgL1 a potential candidate for technical applications. In addition, CgL1 was found to catalyze the CC/CO coupling of several phenolic compounds which can serve as precursors for the synthesis of natural products like antibiotics and phytohormones. This activity and product distribution were influenced by pH value and mediators used.