Peptidotriazoles with antimicrobial activity against bacterial and fungal plant pathogens

Identification and characterization of amphipathic antimicrobial peptides with broad spectrum activity against multi-drug resistant bacteria

Antimicrobial peptides (AMPs) are potential alternatives to antibiotics given the reduced likelihood of resistance and their high selectivity towards bacteria. AMPs with activity against antibiotic-resistant bacteria have been reported. The aim of this study is to characterize the activity of novel BP100 analogues against multidrug-resistant bacteria. Eleven bacterial strains representing five pathogenic species were used to evaluate the antimicrobial activity of 26 peptides. An initial screen was performed at 50 µg/ml, and those peptides that inhibited ≈90 % of growth of all strains were selected. Minimum inhibitory concentrations (MIC), minimum bactericidal concentrations (MBC), inhibition in biofilm formation, time kill assays, stability in human serum and in vivo toxicity were assessed. BP607, BP76 and BP145, had broad activity against multidrug-resistant bacteria. MICs ranged between 3.13 and 50 µg/ml, whereas MBCs ranged between 6.25 and 100 µg/ml. Acinetobacter baumannii, Klebsiella pneumoniae and Escherichia coli were the most susceptible species. At 2x the MIC, all compounds were bactericidal after 6h. BP76 inhibited ≥ 76.77 % of K. pneumoniae and E. coli biofilm formation at subinhibitory concentrations. BP145 had improved serum stability and lower toxicity compared to BP607. In conclusion, BP145 and BP76 demonstrate broad antimicrobial activity, are active at non-toxic concentrations, feature bactericidal activity at 6h and inhibit biofilm formation.

Facets of click-mediated triazoles in decorating amino acids and peptides

Decorating biomolecular building blocks, such as amino acids, to afford desired and tuneable photophysical/biophysical properties would allow chemical biologists to use them for several biotechnological and biosensing applications. While many synthetic methodologies have been explored in this direction, advantages provided by click-derived triazole moieties are second to none. However, since their discovery, click-mediated triazoles have been majorly utilised as linkers for conjugating biomolecules, creating materials with novel properties, such as polymers or drug conjugates. Despite exploring their profound role as linkers, click-mediated triazoles as an integral part of biomolecular building blocks have not been addressed. 1,2,3-Triazole, a transamide mimic, exhibits high aromatic stacking propensity, high associability with biomolecules through H-bonding, and high stability against enzymatic hydrolysis. Furthermore, triazoles can be considered donors useable for installation/modulation of the photophysics of a fluorophore. Therefore, triazole with a chromophoric unit may rightly be utilised as an integral part of biomolecular building blocks to install microenvironment-sensitive solvofluorochromic properties suitable for biological sensing, studying inter-biomolecular interactions and introducing novel physicochemical properties in a biomolecule. This review mainly focuses on the facets of click-derived triazole in designing novel fluorescent amino acids and peptides with a particular emphasis on those wherein triazole acts as an integral part of amino acids, i.e. the side chain, generating a new class of fluorescent unnatural triazolyl amino acids. Thus, fluorescent triazolyl unnatural amino acids, peptidomimetics with such amino acids and aliphatic/aromatic triazolyl amino acids as scaffolds for peptidomimetics are the central part. However, to start with, a brief history, followed by a discussion on various other relevant facets of triazoles as linkers in various fields ranging from therapeutics, materials science, diagnostics, and bioconjugation to peptidomimetics, is cited. Additionally, the possible roles of CuAAC-mediated triazoles in shaping the future of bioorganic chemistry, medicinal chemistry, diagnostics, nucleoside chemistry and protein engineering are briefly discussed.

Synthesis of Temporin-SHa Retro Analogs with Lysine Addition/Substitution and Antibiotic Conjugation to Enhance Antibacterial, Antifungal, and Anticancer Activities

In the face of rising the threat of resistant pathogens, antimicrobial peptides (AMPs) offer a viable alternative to the current challenge due to their broad-spectrum activity. This study focuses on enhancing the efficacy of temporin-SHa derived NST-2 peptide (1), which is known for its antimicrobial and anticancer activities. We synthesized new analogs of 1 using three strategies, i.e., retro analog preparation, lysine addition/substitution, and levofloxacin conjugation. Analogs were tested in terms of their antibacterial, antifungal, and anticancer activities. Analog 2, corresponding to retro analog of NST-2, was found to be more active but also more hemolytic, reducing its selectivity index and therapeutic potential. The addition of lysine (in analog 3) and lysine substitution (in analog 7) reduced the hemolytic effect resulting in safer peptides. Conjugation with levofloxacin on the lysine side chain (in analogs 4 and 5) decreased the hemolytic effect but unfortunately also the antimicrobial and anticancer activities of the analogs. Oppositely, conjugation with levofloxacin at the N-terminus of the peptide via the β-alanine linker (in analogs 6 and 8) increased their antimicrobial and anticancer activity but also their hemolytic effect, resulting in less safe/selective analogs. In conclusion, lysine addition/substitution and levofloxacin conjugation, at least at the N-terminal position through the β-alanine linker, were found to enhance the therapeutic potential of retro analogs of NST-2 whereas other modifications decreased the activity or increased the toxicity of the peptides.

New Triazole-Isoxazole Hybrids as Antibacterial Agents: Design, Synthesis, Characterization, In Vitro, and In Silico Studies

Novel isoxazole-triazole conjugates have been efficiently synthesized using 3-formylchromone as starting material according to a multi-step synthetic approach. The structures of the target conjugates and intermediate products were characterized by standard spectroscopic techniques (1H NMR and 13C NMR) and confirmed by mass spectrometry (MS). The all-synthesized compounds were screened for their antibacterial activity against three ATCC reference strains, namely Staphylococcus aureus ATCC 25923, Staphylococcus aureus ATCC BAA-44, and Escherichia coli ATCC 25922 as well as one strain isolated from the hospital environment Pseudomonas aeruginosa. The findings indicate that conjugate 7b exhibits a stronger antibacterial response against the tested Escherichia coli ATCC 25922 and Pseudomonas aeruginosa pathogenic strains compared to the standard antibiotics. Furthermore, hybrid compound 7b proved to have a bactericidal action on the Escherichia coli ATCC 25922 strain, as evidenced by the results of the MBC determination. Moreover, the ADMET pharmacokinetic characteristics revealed a favorable profile for the examined compound, as well as a good level of oral bioavailability. Molecular docking and molecular dynamics simulations were performed to explore the inhibition mechanism and binding energies of conjugate 7b with the proteins of Escherichia coli and Pseudomonas aeruginosa bacterial strains. The in silico results corroborated the data observed in the in vitro evaluation for compound 7b.

Synthetic Peptides against Plant Pathogenic Bacteria

The control of plant diseases caused by bacteria that seriously compromise crop productivity around the world is still one of the most important challenges in food security. Integrated approaches for disease control generally lack plant protection products with high efficacy and low environmental and health adverse effects. Functional peptides, either from natural sources or synthetic, are considered as novel candidates to develop biopesticides. Synthetic peptides can be obtained based on the structure of natural compounds or de novo designed, considering the features of antimicrobial peptides. The advantage of this approach is that analogues can be conveniently prepared, enabling the identification of sequences with improved biological properties. Several peptide libraries have been designed and synthetized, and the best sequences showed strong bactericidal activity against important plant pathogenic bacteria, with a good profile of biodegradability and low toxicity. Among these sequences, there are bacteriolytic or antibiofilm peptides that work against the target bacteria, plant defense elicitor peptides, and multifunctional peptides that display several of these properties. Here, we report the research performed by our groups during the last twenty years, as well as our ongoing work. We also highlight those peptides that can be used as candidates to develop novel biopesticides, and the main challenges and prospects.

1,2,3-Triazoles as Biomimetics in Peptide Science

Natural peptides are an important class of chemical mediators, essential for most vital processes. What limits the potential of the use of peptides as drugs is their low bioavailability and enzymatic degradation in vivo. To overcome this limitation, the development of new molecules mimicking peptides is of great importance for the development of new biologically active molecules. Therefore, replacing the amide bond in a peptide with a heterocyclic bioisostere, such as the 1,2,3-triazole ring, can be considered an effective solution for the synthesis of biologically relevant peptidomimetics. These 1,2,3-triazoles may have an interesting biological activity, because they behave as rigid link units, which can mimic the electronic properties of amide bonds and show bioisosteric effects. Additionally, triazole can be used as a linker moiety to link peptides to other functional groups.

Differential Susceptibility of Xylella fastidiosa Strains to Synthetic Bactericidal Peptides

The kinetics of cell inactivation and the susceptibility of Xylella fastidiosa subspecies fastidiosa, multiplex, and pauca to synthetic antimicrobial peptides from two libraries (CECMEL11 and CYCLO10) were studied. The bactericidal effect was dependent on the relative concentrations of peptide and bacterial cells, and was influenced by the diluent, either buffer or sap. The most bactericidal and lytic peptide was BP178, an enlarged derivative of the amphipathic cationic linear undecapeptide BP100. The maximum reduction in survivors after BP178 treatment occurred within the first 10 to 20 min of contact and at micromolar concentrations (<10 μM), resulting in pore formation in cell membranes, abundant production of outer membrane vesicles, and lysis. A threshold ratio of 10⁹ molecules of peptide per bacterial cell was estimated to be necessary to initiate cell inactivation. There was a differential susceptibility to BP178 among strains, with DD1 being the most resistant and CFBP 8173 the most susceptible. Moreover, strains showed a proportion of cells under the viable but nonculturable state, which was highly variable among strains. These findings may have implications for managing the diseases caused by X. fastidiosa.

Antimicrobial random peptide cocktails: a new approach to fight pathogenic bacteria

Antibiotic resistance in bacteria has become a serious threat to public health, and therefore there is an urgent need to develop new classes of antimicrobial agents. Nowadays, natural antimicrobial peptides (AMPs) and their synthetic derivatives are considered as promising alternatives to traditional antibiotics. The broad molecular diversity of AMPs, in terms of sequences and structures, suggests that their activity does not depend on specific features of amino acid sequence or peptide conformation. We therefore selected two common properties of AMPs, (high percentage of hydrophobic and cationic amino acids), to develop a novel approach to synthesize random antimicrobial peptide mixtures (RPMs). Instead of incorporating a single amino acid at each coupling step, a mixture of hydrophobic and cationic amino acids in a defined proportion is coupled. This results in a mixture that contains up to 2n sequences, where n is the number of the coupling step, of random peptides with a defined composition, stereochemistry, and controlled chain length. We have discovered that RPMs of hydrophobic and cationic α-amino acids, such as phenylalanine and lysine, display strong and broad antimicrobial activity towards Gram-negative, Gram-positive, clinically isolated antibiotic resistant "superbugs", and several plant pathogenic bacteria. This review summarizes our efforts to explore the mode of action of RPMs and their potential as bioactive agents for multiple applications, including the prevention of biofilm formation and degradation of mature biofilm (related to human health), reduction of disease severity in plant bacterial disease models (related to crop protection), and inhibition of bacterial growth in milk (related to food preservation). All our findings illustrate the effectiveness of RPMs and their great potential for various applications.

Design, synthesis, and biological evaluation of cyclic peptidotriazoles derived from BPC194 as novel agents for plant protection

The search for novel antimicrobial agents to be used for plant protection has prompted us to design analogues incorporating non-natural amino acids. Herein, we designed and synthesized cyclic peptidotriazoles derived from the lead antimicrobial cyclic peptide c(Lys-Lys-Leu³ -Lys-Lys⁵ -Phe-Lys-Lys-Leu-Gln) (BPC194). In particular, Leu³ and Lys⁵ were replaced by a triazolyl alanine, a triazolyl norleucine or a triazolyl lysine. These peptides were screened for their antibacterial activity against Xanthomonas axonopodis pv. vesicatoria, Erwinia amylovora, and Pseudomonas syringae pv. syringae, for their hemolysis and for their phytotoxicity. Results showed that the type of triazolyl amino acid and the substituent present at the triazole influenced the antibacterial and hemolytic activities. Moreover, the position of this residue was also crucial for the hemolysis. The lead compounds BPC548 and BPC550 exhibited high antibacterial activity (MIC of 3.1 to 25 μM), low hemolysis (19 and 26% at 375 μM, respectively) and low phytotoxicity. Therefore, these analogues could be used as new leads for the development of effective agents to control pathogenic bacteria responsible for plant diseases of economic importance.

Antiproliferative effect and characterization of a novel antifungal peptide derived from human Chromogranin A

CGA-N46 is a novel antifungal peptide derived from the N-terminus of human Chromogranin A, corresponding to the 31st to 76th amino acids. Further research on its activities and characteristics may be helpful for the application of CGA-N46 in medical or other situations. In the present study, the antifungal spectrum and physicochemical characteristics of CGA-N46 were investigated using an antifungal assay, its antiproliferative effects on cancer and normal cells were assessed using MTT assay and its combinatorial effect with other antibiotics was analyzed using checkerboard analysis. The results showed that CGA-N46 exhibited antifungal activity against the tested Candidas (C. glabrata, C. parapsilosis, C. krusei, C. tropicalis and C. albicans) at a concentration of <0.8 mM, but had no effect on the growth of filamentous fungi or other types of fungi (Cryptococcus neoformans, Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger, Fusarium moniliforme, Microsporum canis, Microsporum gypseum, Trichophyton rubrum and Trichophyton mentagrophytes), even at a concentration of 3.2 mM. CGA-N46 had an inhibitory effect on the proliferation of lung cancer A549 cells and a reversible effect on the growth of normal primary chicken embryo fibroblast cells, but no hemolytic activity on human erythrocytes at the minimum inhibitory concentration of CGA-N46 against yeasts. The antifungal activity of CGA-N46 was stable at a temperature <40°C or within a broad pH range (pH 5.0-7.0). Its antifungal activity was enhanced when the peptide was used in combination with fluconazole and terbinafine. The present results indicate that CGA-N46 is a safe, physicochemically stable, antifungal peptide with anticancer cell activity that exhibits an additive effect with conventional antibiotics.

Erwinia amylovora loop-mediated isothermal amplification (LAMP) assay for rapid pathogen detection and on-site diagnosis of fire blight

Several molecular methods have been developed for the detection of Erwinia amylovora, the causal agent of fire blight in pear and apple, but none are truly applicable for on-site use in the field. We developed a fast, reliable and field applicable detection method using a novel target on the E. amylovora chromosome that we identified by applying a comparative genomic pipeline. The target coding sequences (CDSs) are both uniquely specific for and all-inclusive of E. amylovora genotypes. This avoids potential false negatives that can occur with most commonly used methods based on amplification of plasmid gene targets, which can vary among strains. Loop-mediated isothermal AMPlification (LAMP) with OptiGene Genie II chemistry and instrumentation proved to be an exceptionally rapid (under 15 min) and robust method for detecting E. amylovora in orchards, as well as simple to use in the plant diagnostic laboratory. Comparative validation results using plant samples from inoculated greenhouse trials and from natural field infections (of regional and temporal diverse origin) showed that our LAMP had an equivalent or greater performance regarding sensitivity, specificity, speed and simplicity than real-time PCR (TaqMan), other LAMP assays, immunoassays and plating, demonstrating its utility for routine testing.