Detection of pesticide using the large stokes shift of luminescence of a mixed lanthanide co-doped metal–organic framework

Pesticides luminescent sensing by a Tb3+-doped Zn metal-organic framework with selectivity towards parathion

Organophosphorus pesticides (OPPs) such as parathion have extensive uses in agriculture and household applications. Chronic exposure to these pesticides can cause severe health and environmental issues. Therefore, a current ecological concern is associated with accumulating these noxious OPPs in food and water sources. In this work, a new Tb3+-doped Zn-LMOF (Zn-LMOF= (3D) {[Zn3(1,4 benzenedicarboxylate)3(EtOH)2]·(EtOH)0.6}∞) was synthesized by a solvent-free reaction between the Zn-LMOF and the salt TbCl3·6H2O using a high-speed ball milling. The Tb@Zn-LMOF was thoroughly characterized by multiple spectroscopic tools, including Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy, and studied in-depth as a luminescent sensor for a series of pesticides (parathion, malathion, methalaxil, carbofuran, iprodione, captan and glyphosate) in aqueous methanol. The Tb@Zn-LMOF is a long-lived green-emitting compound with luminescence originated by an efficient antenna effect from the excited energy levels of Zn-LMOF toward the 5D state of Tb3+ ions, as it is displayed by its strong emission bands at 488, 545, 585, and 620 nm and a lifetime of 1.01 ms upon excitation at 290 nm. Additions of pesticides to a neutral methanolic dispersion of Tb@Zn-LMOF modified its green emission intensity with a pronounced selectivity toward parathion within the micromolar concentration range. The detection limit for parathion was calculated to be 3.04 ± 0.2 μM for Tb@Zn-LMOF. Based on 31P NMR and mass spectrometry studies, it is attributed to the release of lanthanide ions from Tb@Zn-LMOF with the simultaneous formation of a Tb3+-parathion complex.

Turn-off luminescence sensing, white light emission and magnetic studies of two-dimensional lanthanide MOFs

The lanthanide metal organic framework compounds [Ln(BPTA)1.5(Bpy)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1a-5a) and [Ln(BPTA)1.5(Phen)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1b-5b) were prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 2,2'-bipyridine (1a-5a) and 1,10-phenanthroline (1b-5b) as the secondary ligands. Single-crystal structural studies on [Gd(BPTA)1.5(Bpy)]·0.5DMF (3a) and [Dy(BPTA)1.5(Phen)]·0.5DMF (5b) indicated that the compounds have a two-dimensional structure. The Y compound exhibits blue emission, and the other compounds exhibit emission in the expected regions (λex = 350 nm). White light emission was achieved by careful mixing of the red (Eu3+) and green (Tb3+) components in the blue emitting Y compound. Thus, Y0.96Tb0.02Eu0.02 (bpy) and Y0.939Tb0.06Eu0.001 (phen) were found to show white emission when excited using a wavelength of 350 nm. The introduction of N-N-containing ancillary ligands (i.e., bpy and phen) increased the overall quantum yield (QY) of white light emission to 31% and 43%, respectively. The high QY observed for the Tb and Eu compounds was found to be sensitive and selective for the fluorometric detection of azinphos-methyl pesticide and trinitrophenol (TNP) in an aqueous medium at the ppb level. The same behaviour was observed when utilising the compounds as onsite paper strip sensors. Their magnetic properties were also studied, revealing for the Tb and Dy derivatives slow relaxation of the magnetisation at low temperature. The present study highlights the usefulness of rigid π-conjugated molecules such as 2,2'-bipyridine and 1,10-phenanthroline in enhancing the many utilities of rare-earth-containing MOFs towards white light emission, the sensing of harmful and dangerous substances and magnetic properties.

Holmium-Containing Metal-Organic Frameworks as Modifiers for PEBA-Based Membranes

Recently, there has been an active search for new modifiers to create hybrid polymeric materials for various applications, in particular, membrane technology. One of the topical modifiers is metal-organic frameworks (MOFs), which can significantly alter the characteristics of obtained mixed matrix membranes (MMMs). In this work, new holmium-based MOFs (Ho-MOFs) were synthesized for polyether block amide (PEBA) modification to develop novel MMMs with improved properties. The study of Ho-MOFs, polymers and membranes was carried out by methods of X-ray phase analysis, scanning electron and atomic force microscopies, Fourier transform infrared spectroscopy, low-temperature nitrogen adsorption, dynamic and kinematic viscosity, static and dynamic light scattering, gel permeation chromatography, thermogravimetric analysis and contact angle measurements. Synthesized Ho-MOFs had different X-ray structures, particle forms and sizes depending on the ligand used. To study the effect of Ho-MOF modifier on membrane transport properties, PEBA/Ho-MOFs membrane retention capacity was evaluated in vacuum fourth-stage filtration for dye removal (Congo Red, Fuchsin, Glycine thymol blue, Methylene blue, Eriochrome Black T). Modified membranes demonstrated improved flux and rejection coefficients for dyes containing amino groups: Congo Red, Fuchsin (PEBA/Ho-1,3,5-H3btc membrane possessed optimal properties: 81% and 68% rejection coefficients for Congo Red and Fuchsin filtration, respectively, and 0.7 L/(m2s) flux).

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Non-biological fluorescent chemosensors for pesticides detection

The ongoing poisoning of agricultural products has pushed the security problem to become an important issue. Among them, exceeding the standard rate of pesticide residues is the main factor influencing the quality and security of agricultural products. Moreover, the abuse of pesticides has introduced a large amount of residues in soil and drinking water, which will enter the food chain to the human body, leading to neurological disorders and cancer. Therefore, great efforts have been devoted to developing fluorescent sensors for detecting pesticide in a facile, quickly, sensitive, selective, accurate manner, which exhibit greater advantages than some traditional methods. In this review, we mainly focus on summarizing the non-biological fluorescent probes for organic pesticides detection with the detection limit of micromole to nanomole, including organic functional small molecules, calixarenes and pillararenes, metal organic framework systems, and nanomaterials. Meanwhile, we described the different sensing mechanisms for pesticides detection of these mentioned fluorescent sensors, the detection limit of each pesticide, the application in detecting actual samples, as well as their respective advantages and development prospects associated with present non-biological fluorescent sensors.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

Recent advances in metal-organic frameworks for pesticide detection and adsorption

The large-scale use of pesticides such as organophosphate pesticides (OPPs) and organochlorine pesticides (OCPs) has led to serious environmental problems worldwide, and their high toxicity could cause serious damage to human health. It is crucial to remove and track them precisely in the environment and food resources. As novel nanomaterials, metal-organic frameworks (MOFs) have attracted significant attention in the fields of adsorption and luminescence sensing due to their rich topology, tunable pore size and shape, high surface area, and abundant active sites. Luminescent metal-organic frameworks (LMOFs) have sprung up as great potential chemical sensors to detect pesticides with fast response, high sensitivity, high selectivity and easy operation. Therefore, in this highlight, we focus on recent progress of MOFs in sensing and adsorbing pesticides, as well as in the possible mechanism of sensing, so as to attract more attention to pesticide detection and adsorption.

Experimental and Theoretical Studies of Glyphosate Detection in Water by an Europium Luminescent Complex and Effective Adsorption by HKUST-1 and IRMOF-3

Designing an effective and simple detection method to quantify glyphosate (GLY) herbicide is desirable. Current chromatography-mass spectrometry and electrochemical methods can be used for this purpose, but these methods are difficult to be made portable and need high-cost equipment. Here, we evaluate a luminescent β-diketonate-Eu-ethylenediaminetetraacetic acid complex for GLY quantification in aqueous media on the basis of the luminescent quenching process. This complex successfully measured GLY at concentrations ranging from 5 × 10-7 to 10-5 mol L-1. Theoretical methods (LUMPAC) are also performed to identify the complex most probable structure in solution. We also demonstrate that the metal-organic frameworks HKUST-1 and IRMOF-3, easily synthesized, effectively adsorb GLY in water in about 30 min of contact.