Tannin based polyphenolic bio-macromolecules: Creating a new era towards sustainable flame retardancy of polymers

Ultra-efficient and fire-safety glucose-based cellulose fabrics with high antibacterial and well wearing performance

Developing ultra-efficient fire-safety lyocell fabrics with high performances from biomass was the immense interest due to the sustainable and protective concerns. Herein, novel fully biomass coating of lyocell fabrics (Lyocell/PA-ZnG) was prepared using phytic acid (PA) and zinc gluconate (ZnG) via ion exchange reaction with water solvent. The ideal molecular regulation strategy endowed the Lyocell/PA-ZnG fabrics with rapid-formation thermal insulation residuals and excellent fire safety, which could pass the vertical burning test with the limiting oxygen index (LOI) of 28.8 % at an ultra-low loading of 4.3 wt%. Notably, apart to the peak of heat release rate (pHRR) decreased by 58.6 %, the smoke maximum density (SMD) also decreased by 85.4 %, with respect to pure lyocell fabrics. Lyocell/PA-ZnG fabrics carried well antibacterial property for Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with 99.99 % antibacterial rates due to the existence of Zn ion. Furthermore, the strong hydrogen bonding between cellulose and PA-ZnG enabled Lyocell/PA-ZnG fabrics to be excellent friction durability. The wearing properties of Lyocell/PA-ZnG fabrics, such as whiteness, moisture regain, and fabrics handle remained after finishing. The work provided a simple and efficient strategy for the eco-friendly preparation of multifunctional lyocell fabrics.

Bifunctional Chromium-Doped Phenolic Porous Hydrothermal Carbon Catalysts for the Catalytic Conversion of Glucose to 5-Hydroxymethylfurfural

A sustainable and efficient approach for converting carbohydrates into 5-hydroxymethylfurfural (HMF) via heterogeneous catalysis is crucial for effectively utilizing biomass. In this study, we synthesized a series of CrX-polyphenol-formaldehyde resin (PTF) catalysts, which are composites of Cr-doped phenolic-resin-based hydrothermal carbon, using a chelation-assisted multicomponent co-assembly strategy. The performance of the synthesized catalysts was assessed through various analytical techniques, including scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, pyrolysis-Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis. Cr incorporation into the catalysts enhanced the total and Lewis acidities. Notably, the optimized catalyst, designated as Cr0.6-PTF, achieved an effective glucose conversion into HMF, yielding a maximum of 69.5% at 180 °C for 180 min in a saturated NaCl solution (NaClaq)/dimethyl sulfoxide (2: 18) solvent system. Furthermore, Cr0.6-PTF maintained excellent catalytic activity and a stable chemical structure after nine cyclic reactions, resulting in a 63.8% HMF yield from glucose. This study revealed an innovative approach for utilizing metal-doped phenolic resin hydrothermal carbon to transform glucose into platform chemicals.

Recent Advancements of Bio-Derived Flame Retardants for Polymeric Materials

The sustainable flame retardancy of polymeric materials is a key focus for the direction of the next generation in the field of fire safety. Bio-derived flame retardants are gaining attention as environmentally friendly additives due to their low ecological impact and decreasing costs. These compounds can enhance char formation in polymeric materials by swelling upon heating, attributed to their functional groups. This review explores various biomolecules used as flame retardants, including phytic acid, chitosan, lignin, tannic acid, and bio-derived phosphorus and nitrogen compounds, emphasizing their flame-retardant properties and compatibility with different polymer matrices. The primary focus is on the structural characteristics, modifications, and flame-retardant behaviors of these bio-derived additives, particularly regarding their mechanisms of action within polymeric materials. Finally, the review explores the opportunities, current challenges, and future directions for the practical application of bio-derived flame retardants in polymer materials.

Biopolymer-Based Flame Retardants and Flame-Retardant Materials

Polymeric materials featuring excellent flame retardancy are essential for applications requiring high levels of fire safety, while those based on biopolymers are highly favored due to their eco-friendly nature, sustainable characteristics, and abundant availability. This review first outlines the pyrolysis behaviors of biopolymers, with particular emphasis on naturally occurring ones derived from non-food sources such as cellulose, chitin/chitosan, alginate, and lignin. Then, the strategies for chemical modifications of biopolymers for flame-retardant purposes through covalent, ionic, and coordination bonds are presented and compared. The emphasis is placed on advanced methods for introducing biopolymer-based flame retardants into polymeric matrices and fabricating biopolymer-based flame-retardant materials. Finally, the challenges for sustaining the current momentum in the utilization of biopolymers for flame-retardant purposes are further discussed.

Empowering the flame retardancy and adhesion for various substrates using renewable feedstock

Developing biobased flame retardant adhesives using a green and simple strategy has recently gained significant attention. Therefore, in this study, we have orange peel waste (OPW) and Acacia gum (AG) phosphorylated at 140 °C to synthesize biomass-derived flame retardant adhesive. OPW is a biomass material readily available in large quantities, which. Has been utilized to produce an eco-friendly, efficient adhesive. Functionalized polysaccharides were used as a binder rather than volatile, poisonous, and unsustainable petroleum-based aldehydes. The P@OPW/AG green adhesive exhibited a higher tensile strength of 11.25 MPa when applied to cotton cloth and demonstrated versatility across various substrates such as glass, cardboard, plastic, wood, and textiles. Additionally, this bio-based robust adhesive displayed remarkable flame-retardant properties. To optimize its flame retardancy, three tests were employed: the spirit lamp flame test, the vertical flammability test (VFT), and the limiting oxygen index (LOI) test. The P@OPW/AG-coated cotton fabric achieved an impressive LOI result of 42 %, while the VFT yielded a char length of only 4 cm. Additionally, during the flame test, P@OPW/AG coated cloth endured more than 845 s of continuous flame illumination. This work offers a sustainable and fire-safe method for creating environmentally friendly high-performance composites using a recyclable bio-based flame-retardant OPW/AG glue.

Synthesis and Characterization of Sodium Lignosulfonate-Based Phosphorus-Containing Intermediates and Its Composite Si-P-C Silicone-Acrylic Emulsion Coating for Flame-Retardant Plywood

Through the substitution reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and sodium lignosulfonate (LS), a novel phosphorus-containing sodium lignosulfonate (DAL) was successfully synthesized via the solvothermal method and used as a multifunctional flame retardant to prepare a novel silicone-acrylic emulsion (SAE) composite Si-P-C coating. The structure of DAL was determined by X-ray diffraction (XRD), attenuated total reflection infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (solid-state 13C NMR and 31P NMR). The results demonstrated that incorporating an appropriate dosage of DAL (0.9 g, 1.5 wt %) into SAE-based composite coatings enhances flame retardancy and reduces heat release and smoke production during burning. The peak heat release rate (p-HRR) decreases from 236.7 to 120.3 kW·m-2, total smoke production (TSP) decreases by 71.1%, and the flame-retardant index increases from 1.00 to 4.58. Meanwhile, the coating is transformed into a dense and nonflammable vitreous polyphosphate barrier layer during the firing process to prevent heat or mass transfer. Furthermore, the pyrolysis kinetics identify that the 3D Z-L-T model governs the coatings' pyrolysis, and the appropriate DAL makes the pyrolysis Eα climb from 300.98 to 331.30 kJ·mol-1 at 358-439 °C. Hence, this study presents a new synthesis method of multifunctional flame retardant DAL, studies the excellent properties and cross-linking mechanism of DAL-doped SAE-composite Si-P-C coatings, and explores a halogen-free, low-carbon, and clean eco-technology strategy.

Cohesion and Adhesion Performance of Tannin-Glyoxal Adhesives at Different Formulations and Hardener Types for Bonding Particleboard Made of Areca (Areca catechu) Leaf Sheath

The use of alternative raw materials, such as agricultural biomass and by-products, in particleboard (PB) production is a viable approach to address the growing global demand for sustainable wood-based materials. The purpose of this study was to investigate the effect of the type of hardener and tannin-glyoxal (TG) adhesive formulation on the cohesion and adhesion performance of TG adhesives for areca-based PB. Two types of hardeners were used, NH4Cl and NaOH, and three adhesive formulations with tannin:glyoxal ratios (i.e., F1 (1:2), F2 (1:1), and F3 (2:1)) were applied to improve the cohesion performance and adhesion for areca-based TG adhesive for PB. The basic, chemical, and mechanical properties of the TG adhesive were investigated using a Fourier transform infrared spectrometer, rotational rheometer, dynamic mechanical analyzer (DMA), and X-ray diffractometer. The results show that a high glyoxal percentage increases the percentage of crystallinity in the adhesive. This shows that the increase in glyoxal is able to form better polymer bonds. DMA analysis shows that the adhesive is elastic and the use of NH4Cl hardener has better mechanical properties in thermodynamic changes than the adhesive using NaOH hardener. Finally, the adhesion performance of the TG adhesives on various types of hardeners and adhesive formulations was evaluated on areca-based PB panels. Regardless of the type of hardener, the TG adhesive made with F1 had better cohesion and adhesion properties compared to F2 and F3. Combining F1 with NH4Cl produced areca-based PB panels with better physical and mechanical qualities than the adhesive formulations F2 and F3, and complied with Type 8 particleboard according to SNI 03-2105-2006 standard.

Robust Vanillin-Derived Poly(thioether imidazoles) as Both a Latent Curing and Toughening Agent for One-Component Epoxy Resins

One-component epoxy resins based on latent curing agents have garnered research attention owing to their outstanding storage stability and excellent processability, while their development considerably depends on the design and preparation of sustainable latent curing agents. Herein, taking structural advantage of lignin-derived vanillin, a biobased polymerizable aromatic imidazole monomer with α,ω-diene functionality was designed and prepared, which was applicable in subsequent thiol-ene polymerization, yielding a series of robust poly(thioether imidazoles) with excellent tunability of the structure and properties. The findings indicated that the precursors comprising poly(thioether imidazole) and commercially available epoxy resins could keep their fluidity at 25 °C for over 90 days and rapidly cured into resins under elevated temperature, demonstrating that the poly(thioether imidazole) can serve as both a latent curing and toughening agent for one-component epoxy resins because of homopolymerization initiated by imidazole groups and the introduction of an aliphatic chain in the as-prepared poly(thioether imidazole) matrix.

Extraction, characterization of polyphenols from certain medicinal plants and evaluation of their antioxidant, antitumor, antidiabetic, antimicrobial properties, and potential use in human nutrition

Introduction

Dietary medicinal plants are among the most sought-after topics in alternative medicine today due to their preventive and healing properties against many diseases.

Aim

This study aimed to extract and determine the polyphenols from indigenous plants extracts, i.e., Mentha longifolia, M. arvensis, Tinospora cordifolia, Cymbopogon citratus, Foeniculum vulgare, Cassia absus, Camellia sinensis, Trachyspermum ammi, C. sinensis and M. arvensis, then evaluate the antioxidant, cytotoxicity, and antimicrobial properties, besides enzyme inhibition of isolated polyphenols.

Methods

The antioxidant activity was evaluated by DPPH, Superoxide radical, Hydroxyl radical (OH.), and Nitric oxide (NO.) scavenging activity; the antidiabetic activity was evaluated by enzymatic methods, and anticancer activity using MTT assay, while the antibacterial activity.

Results

The results showed that tested medicinal plants' polyphenolic extracts (MPPE) exhibited the most significant antioxidant activity in DPPH, hydroxyl, nitric oxide, and superoxide radical scavenging methods because of the considerable amounts of total polyphenol and flavonoid contents. UHPLC profile showed twenty-five polyphenol complexes in eight medicinal plant extracts, categorized into phenolic acids, flavonoids, and alkaloids. The main polyphenol was 3-Feroylquinic acid (1,302 mg/L), also found in M. longifolia, C. absus, and C. sinensis, has a higher phenolic content, i.e., rosmarinic acid, vanillic acid, chlorogenic acid, p-coumaric acid, ferulic acid, gallic acid, catechin, luteolin, 7-O-neohesperideside, quercetin 3,7-O-glucoside, hesperidin, rutin, quercetin, and caffeine in the range of (560-780 mg/L). At the same time, other compounds are of medium content (99-312 mg/L). The phenolics in C. sinensis were 20-116% more abundant than those in M. longifolia, C. absus, and other medicinal plants. While T. cordifolia is rich in alkaloids, T. ammi has a lower content. The MTT assay against Caco-2 cells showed that polyphenolic extracts of T. ammi and C. citratus had maximum cytotoxicity. While M. arvensis, C. sinensis, and F. vulgare extracts showed significant enzyme inhibition activity, C. sinensis showed minor inhibition activity against α-amylase. Furthermore, F. vulgare and C. sinensis polyphenolic extracts showed considerable antibacterial activity against S. aureus, B. cereus, E. coli, and S. enterica.

Discussion

The principal component analysis demonstrated clear separation among medicinal plants' extracts based on their functional properties. These findings prove the therapeutic effectiveness of indigenous plants and highlight their importance as natural reserves of phytogenic compounds with untapped potential that needs to be discovered through advanced analytical methods.

Fabrication of P/N/B-Based Intumescent Flame-Retardant Coating for Polyester/Cotton Blend Fabric

Polyester/cotton (T/C) blend fabrics are highly flammable due to the particular "scaffolding effect". In this work, an intumescent flame retardant (IFR) agent containing P, N, and B was designed and synthesized using bio-based phytic acid, pentaerythritol, boric acid, and urea. The IFR compounds were deposited onto a T/C blend fabric by the surface-coating route. The chemical structure of IFR agent and its potential cross-linking reactions with T/C fibers were characterized. The morphology, thermal stability, heat-release ability, flame retardancy, and mechanism of coated T/C blend fabrics were explored. The self-extinguishing action was observed for the coated T/C blend fabric with a weight gain of 13.7%; the limiting oxygen index (LOI) value increased to 27.1% versus 16.9% for a pristine one. Furthermore, the intumescent flame retardant (IFR) coating imparted T/C blend fabrics with high thermal stability and significantly suppressed heat release by nearly 50%. The char residue analyses on morphology and element content confirmed the intumescent FR action for coated T/C blend fabrics. The prepared IFR coating has great potential to serve as an eco-friendly approach for improving the flame retardancy of T/C blend textiles.

β-cyclodextrin microencapsulation enhanced antioxidant and antihyperlipidemic properties of Tunisian Periploca angustifolia roots condensed tannins in rats

This study aimed to investigate the microencapsulation of novel condensed tannins isolated from Periploca angustifolia roots, using β-cyclodextrin macrocyclic oligosaccharides, in order to enhance their antioxidant and antihyperlipidemic potentials. Scanning electron microscopy and Fourier transform infrared spectroscopy results revealed that tannin fraction was successfully included into β-cyclodextrin cavities proved with an encapsulation efficacy of 70%. Our in vitro findings highlighted that both pure and encapsulated tannins have efficient inhibition capacities of pancreatic lipase activity. However, the inclusion complex has the greatest, in vivo, antioxidant, and antihyperlipidemic effects. In fact, results showed that complexed tannins had markedly restored serum lipid biomarkers, lipid peroxidation, protein carbonyl oxidation, and antioxidant enzyme defense. These findings were additionally confirmed by aortic and myocardial muscle sections of histological examination. Consequently, β-cyclodextrin microencapsulation may be considered as an effective and promising technique for tannin delivery with improved antioxidant and antihyperlipidemic activities.

Improved Fire Retardancy of Cellulose Fibres via Deposition of Nitrogen-Modified Biopolyphenols

Driven by concerns over the health and environmental impacts of currently used fire retardants (FRs), recent years have seen strong demand for alternative safer and sustainable bio-based FRs. In this paper, we evaluated the potential of nitrogen-modified biopolyphenols as FRs for cellulosic natural fibres that could be used in low-density cellulose insulations. We describe the preparation and characterisation of nitrogen-modified lignin and tannin containing over 10% nitrogen as well as the treatment of cellulose pulp fibres with combinations of lignin or tannin and adsorption-enhancing retention aids. Combining lignin or tannin with a mixture of commercial bio-based flocculant (cationised tannin) and anionic retention chemical allowed for a nearly fourfold increase in lignin adsorption onto cellulosic pulp. The nitrogen-modified biopolyphenols showed significant improvement in heat release parameters in micro-scale combustion calorimetry (MCC) testing compared with their unmodified counterparts. Moreover, the adsorption of nitrogen-modified lignin or tannin onto cellulose fibres decreased the maximum heat release rate and total heat release compared with cellulose reference by 15-23%. A further positive finding was that the temperature at the peak heat release rate did not change. These results show the potential of nitrogen-modified biopolyphenols to improve fire-retarding properties of cellulosic products.

Assembled hybrid films based on sepiolite, phytic acid, polyaspartic acid and Fe3+ for flame-retardant cotton fabric

To impart durable flame retardant property to cotton fabric, a kind of multilayered hybrid film based on environmentally friendly phytic acid, sepiolite, polyaspartic acid, and Fe3+ were deposited on the surface of cotton fabric by layer-by-layer and spraying method to form a dense protective layer. Compared with cotton fabric, hybrid film coated cotton showed excellent flame retardant property and low fire hazard, which can be demonstrated by vertical flame test, limiting oxygen index (LOI) and cone calorimeter test. After-flame time and after-glow time of hybrid film coated cotton is 1 s and 1 s, respectively. LOI value of hybrid film coated cotton increased by 44.4% compared with control sample. Cone calorimeter test revealed a total heat release rate reduction of 52.6% and peak heat release rate reduction of 73.6% for hybrid film coated cotton fabric. This work demonstrates that the hybrid film composed of phytic acid, sepiolite, polyaspartic acid, and Fe3+ could improve the durable flame retardant property of cotton fabric.

A critical look at challenges and future scopes of bioactive compounds and their incorporations in the food, energy, and pharmaceutical sector

Bioactive compounds refer to secondary metabolites extracted from plants, fungi, microbes, or animals. Besides having pharmacological or toxicological effects on organisms leading to utilization in food and pharmaceutical industries, the discovery of novel properties of such compounds has led to the diversification of their applications, ranging from cosmetics and functionalized biomaterials to bioremediation and alternate fuels. Conventional time-consuming and solvent-intensive methods of extraction are increasingly being replaced by green solvents such as ionic liquids, supercritical fluids, and deep eutectic solvents, as well as non-conventional methods of extraction assisted by microwaves, pulse electric fields, enzymes, ultrasound, or pressure. These methods, along with advances in characterization and optimization strategies, have boosted the commercial viability of extraction especially from agrowastes and organic residues, promoting a sustainable circular economy. Further development of microfluidics, optimization models, nanoencapsulation, and metabolic engineering are expected to overcome certain limitations that restrict the growth of this field, in the context of improving screening, extraction, and economy of processes, as well as retaining biodiversity and enhancing the stability and functionality of such compounds. This review is a compilation of the various extraction and characterization methods employed for bioactive compounds and covers major applications in food, pharmacy, chemicals, energy, and bioremediation. Major limitations and scope of improvement are also discussed.

Bio-packaging based on cellulose acetate from banana pseudostem and containing Butia catarinensis extracts

Banana (Musa acuminata) pseudostem cellulose was extracted and acetylated (CA) to prepare membranes with potential use as bio-packages. The CA membrane was embedded by Butia seed (CA-BS) or Butia pulp (CA-BP) extracts obtained from Butia catarinenses (Butia). The produced CA, CA-BS, and CA-BP membranes were evaluated for their physical-chemical, mechanical, thermal, and antibacterial properties. The process for obtaining the cellulose yielded a material with about 92.17% cellulose (DS = 2.85). The purity, cellulose degree acetylation, and the incorporation of Butia extracts into the membranes were confirmed by FTIR. The CA-BS and CA-BP membranes showed a smaller contact angle and higher swelling ratio than the CA membrane. Furthermore, Butia seed or pulp extracts reduced the elastic modulus and deformation at break compared to the CA membrane. The DSC analysis suggested the compatibility between sections and the CA matrix, whereas the TGA analysis confirmed the thermal stability of the membranes. Moreover, less than 1% of the Butia seed and pulp extracts were put into a food simulant media from the membrane. Finally, the CA-BS and CA-BP membranes could inhibit the growth of Staphylococcus aureus and Escherichia coli on their surface, confirming the potential use of these membranes as bio-packaging for food preservation.

Flame Retardancy and Thermal Behavior of Wool Fabric Treated with a Phosphorus-Containing Polycarboxylic Acid

The compound 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) is an eco-friendly water treatment agent possessing flame-retardant phosphorus element and multi-carboxylic acid groups in its molecular structure. In the present work, PBTCA is employed as a finishing agent to improve the flame retardancy of the wool fabrics by the pad-dry-cure technique. The treated wool (10.2% weight gain) by 100 g/L of PBTCA showed an increased flame retardancy with a limiting oxygen index value (LOI) of 44% with a minimum char length of 40 mm. Importantly, the treated wool can self-extinguish after 30 washing cycles. The PBTCA-treated wool exhibited better stability with obviously increased char residue of 39.7% and 28.7% at 600 °C, while only 25.9% and 13.2% were measured for the control wool in nitrogen and air atmosphere, respectively. In addition, the high thermal stability of the treated wool with astonishing char-forming ability is confirmed by the SEM images of the wool after the isothermal heating treatment at different temperatures. Finally, a two-stage flame-retarding mechanism of enhanced crosslinking and char formability of PBTCA-treated wool is proposed and analyzed by infrared spectroscopy (TG-FTIR) and thermal (DSC and TGA) results of the pyrolytic volatiles of the treated wool.