Influence of the initiator system, cerium–polysaccharide, on the surface properties of poly(isobutylcyanoacrylate) nanoparticles

From poly(alkyl cyanoacrylate) to squalene as core material for the design of nanomedicines

This review article covers the most important steps of the pioneering work of Patrick Couvreur and tries to shed light on his outstanding career that has been a source of inspiration for many decades. His discovery of biodegradable poly(alkyl cyanoacrylate) (PACA) nanoparticles (NPs) has opened large perspectives in nanomedicine. Indeed, NPs made from various types of alkyl cyanoacrylate monomers have been used in different applications, such as the treatment of intracellular infections or the treatment of multidrug resistant hepatocarcinoma. This latest application led to the Phase III clinical trial of Livatag^®, a PACA nanoparticulate formulation of doxorubicin. Despite the success of PACA NPs, the development of a novel type of NP with higher drug loadings and lower burst release was tackled by the discovery of squalene-based nanomedicines where the drug is covalently linked to the lipid derivative and the resulting conjugate is self-assembled into NPs. This pioneering work was accompanied by a wide range of novel applications which mainly dealt with the management of unmet medical needs (e.g. pancreatic cancer, brain ischaemia and spinal cord injury).

Thrombolytic therapy based on fucoidan-functionalized polymer nanoparticles targeting P-selectin

Injection of recombinant tissue plasminogen activator (rt-PA) is the standard drug treatment for thrombolysis. However, rt-PA shows risk of hemorrhages and limited efficiency even at high doses. Polysaccharide-poly(isobutylcyanoacrylate) nanoparticles functionalized with fucoidan and loaded with rt-PA were designed to accumulate on the thrombus. Fucoidan has a nanomolar affinity for the P-selectin expressed by activated platelets in the thrombus. Solid spherical fluorescent nanoparticles with a hydrodynamic diameter of 136 ± 4 nm were synthesized by redox radical emulsion polymerization. The clinical rt-PA formulation was successfully loaded by adsorption on aminated nanoparticles and able to be released in vitro. We validated the in vitro fibrinolytic activity and binding under flow to both recombinant P-selectin and activated platelet aggregates. The thrombolysis efficiency was demonstrated in a mouse model of venous thrombosis by monitoring the platelet density with intravital microscopy. This study supports the hypothesis that fucoidan-nanoparticles improve the rt-PA efficiency. This work establishes the proof-of-concept of fucoidan-based carriers for targeted thrombolysis.

Effect of pH and Monomer Dosing Rate in the Anionic Polymerization of Ethyl Cyanoacrylate in Semicontinuous Operation

Nanoparticles of poly(ethyl cyanoacrylate) with more than 10% solids content were prepared by semicontinuous heterophase polymerization at monomer-starved conditions varying the initial pH in the interval of 1–1.75 and at two monomer dosing rates. Measurements by scanning-transmission electron microscopy allowed us to identify an inverse dependence of particle size on pH. Furthermore, all the polymerizations conducted at the slower monomer dosing rate rendered two particle populations, with the larger one formed from the aggregation of a fraction of the smaller particles. It was believed that the so slow addition of the monomer caused the formation of very small but instable particles, thereby a fraction of which aggregated to reduce the total interface particles-aqueous phase, increasing the latex stability. An increase in the monomer dosing rate led to larger and more stable particles in such way that only one population of nanoparticles with around 40 nm in average diameter was obtained.

Tuning of shell and core characteristics of chitosan-decorated acrylic nanoparticles

The aim of the work was to develop a new family of chitosan-coated acrylic nanoparticles to increase the specificity of absorption of drugs associated given by the mucosal route. To achieve this goal, techniques of radical and anionic emulsion polymerisation of isobutylcyanoacrylate (IBCA) were used. Changes in the shell composition were made by using chitosan of different molecular weight and thiolated chitosan to modify the particle surface properties in order to vary the mucosae-nanoparticle interactions. The core was also modified by the inclusion of methyl methacrylate (MMA) as second monomer potentially able to improve the control of drug release. Finally, the labelling of nanoparticles core with a fluorophore, methacryloxyethyl thiocarbamoyl rhodamine B (Polyfluor), was successfully achieved, necessary for the in vitro and in vivo evaluation of the systems created. Results showed that nanoparticle size varied from 200 to 500 nm, depending on the molecular weight of chitosan used. Positive surface charge values were obtained in all cases. In addition, evidences of the presence of thiol groups were obtained (0.03-0.16 x 10(-3)micromol/cm(2) of nanoparticle).

Mucoadhesion mechanism of chitosan and thiolated chitosan-poly(isobutyl cyanoacrylate) core-shell nanoparticles

The study is focused on the evaluation of the potential bioadhesive behaviour of chitosan and thiolated chitosan (chitosan-TBA)-coated poly(isobutyl cyanoacrylates) (PIBCA) nanoparticles. Nanoparticles were obtained by radical emulsion polymerisation with chitosan of different molecular weight and with different proportions of chitosan/chitosan-TBA. Mucoadhesion was ex vivo evaluated under static conditions by applying nanoparticle suspensions on rat intestinal mucosal surfaces and evaluating the amount of nanoparticles remaining attached to the mucosa after incubation. The analysis of the results obtained demonstrated that the presence of either chitosan or thiolated chitosan on the PIBCA nanoparticle surface clearly enhanced the mucoadhesion behaviour thanks to non-covalent interactions (ionic interaction and hydrogen bonds) with mucus chains. Both, the molecular weight of chitosan and the proportion of chitosan-TBA in the formulation influenced the nanoparticle hydrodynamic diameter and hence their transport through the mucus layer. Improved interpenetration ability with the mucus chain during the attachment process was suggested for the chitosan of high molecular weight, enhancing the bioadhesiveness of the system. The presence of thiol groups on the nanoparticle surface at high concentration (200 x 10(-6) micromol SH/cm2) increased the mucoadhesion capacity of nanoparticles by forming covalent bonds with the cysteine residues of the mucus glycoproteins.

Properties of polysaccharides grafted on nanoparticles investigated by EPR

The in vivo fate of nanoparticles developed as drug delivery systems is influenced by the surface characteristics of the colloidal particles. In the present work, surface characteristics of a series of poly(isobutylcyanoacrylate) nanoparticles prepared by redox radical emulsion polymerization with polysaccharides of different molecular weight and nature were characterized by EPR. To this aim, a spin label was grafted on the polysaccharide chains after synthesis of the nanoparticles. The percentage of label showing fast movements was evaluated from EPR spectra which were analyzed according to the Kivelson theory. The results showed that mobility depended on temperature, type, and molecular weight of the polysaccharides. Differences between nanoparticles appeared with low-molecular-weight polysaccharides, while over a defined molecular weight which depended on the nature of the polysaccharide, the spin label behaved almost the same way in the different types of nanoparticles. Paradoxically, the percentage of fast moving label was the highest when linked to the shortest chitosan, which was the most rigid polysaccharide tested in this study. Thus, it was concluded that the apparent mobility of the polysaccharide evaluated by the EPR method depended on the capacity of the polysaccharide chains to fold making possible hydrophobic interactions between the label and the nanoparticle core. The transition between the unfolded-folded regiment depended on the molecular weight and on the nature of the polysaccharide. Results of this study may be useful to improve the understanding of the nanoparticle interactions with blood proteins and complement which in turn influence the in vivo fate of nanoparticles used as drug delivery systems.

Complement activation by core-shell poly(isobutylcyanoacrylate)-polysaccharide nanoparticles: influences of surface morphology, length, and type of polysaccharide

PURPOSE

Biodistribution of intravenously administered nanoparticles depends on opsonization. The aim of this study was the evaluation of complement activation induced by nanoparticles coated with different polysaccharides. Influences of size and configuration of dextran, dextran sulfate, or chitosan bound onto nanoparticles were investigated.

METHOD

Core-shell nanoparticles were prepared by redox radical or anionic polymerization of isobutylcyanoacrylate in the presence of polysaccharides. Conversion of C3 into C3b in serum incubated with nanoparticles was evaluated.

RESULTS

Cleavage of C3 increased with size of dextran bound in "loops" configuration, whereas it decreased when dextran was bound in "brush." It was explained by an increasing steric repulsive effect of the brush, inducing poor accessibility to OH groups. The same trend was observed for chitosan-coated nanoparticles. Nanoparticles coated with a brush of chitosan activated the complement system lesser than nanoparticles coated with a brush of dextran. This was explained by an improved repelling effect. Dextran-sulfate-coated nanoparticles induced a low cleavage of C3 whereas it strongly enhanced protein adsorption.

CONCLUSION

Complement activation was highly sensitive to surface features of the nanoparticles. Type of polysaccharide, configuration on the surface, and accessibility to reactive functions along chains are critical parameters for complement activation.

Elaboration and characterization of thiolated chitosan-coated acrylic nanoparticles

The aim of the present work was to investigate the use of thiolated chitosan in the development of polysaccharide-coated nanoparticles in order to confer specific functionality to the system. After chemical modification of commercial and hydrolysed chitosan (400,000 and 9400 g/mol respectively), thiolated chitosans were used to elaborate particles in the nano-range. They were characterized in terms of size and surface charge measurement. Both analysis showed nanoparticles of mean hydrodynamic diameter around 200 nm and positive zeta potential values, indicating the presence of the cationic polysaccharide at the nanoparticle surface. Moreover, the Ellman's reaction was used to demonstrate the presence of thiol groups at the particle surface. The observation of nanoparticles by scanning electronic microscopy (SEM) showed spherical nanoparticles for all formulations. This new system, combining both the advantages of thiolated polymers and colloidal particles can be proposed as an original drug carrier system for mucosal delivery of biotechnology products.