Unfolding the multi-length scale domain structure of silk fibroin protein

Black phosphorus/silk fibroin films hamper filamentous and invasive growth of Candida albicans

The ability of fungi and bacteria to form biofilms on surfaces poses a serious threat to health and a problem in industrial settings. In this work, we investigated how the surface stiffness of silk fibroin (SF) films is modulated by the interaction with black phosphorus (BP) flakes, quantifying the morphogenesis of C. albicans cells. Raman and infrared (IR) spectroscopies, along with scanning transmission electron microscopy, allowed us to quantify the thickness and diameter of BP flakes dispersed in the SF matrix (e.g., 5.5 nm in thickness and 20 μm in diameter), as well as an increase in beta-sheet secondary structures, resulting in the mesoscopic formation of a globular and nanofibrous surface. The formation of β-sheet crystals in the SF/BP film was correlated with a higher surface stiffness, influencing the shape of C. albicans cells and suppressing their filamentous growth. Raman spectroscopy analysis ultimately suggests an overall reduction in cell vitality and filmogenic capability of cells grown on fibroin-based films containing BP. Our results suggest that the conformational properties of SF can be suitably tuned to design optimized bioselective coatings for biomedical applications.

Construction of Silk Fibroin 3D Microfiber Scaffolds and Their Applications in Anti-Osteoporosis Drug Prediction

Silk microfiber scaffolds have garnered increasing interest due to their outstanding properties, with degumming being the process used to extract the sericin from the cocoon. In the present study, an attempt to tune the biodegradation period of silk through degumming with various sodium borohydride (NaBH4) concentrations and degumming times was studied. We considered the process, the number of baths used, and the salt concentration. Herein, we report a novel method of expanding microfibers from two-dimensional (2D) to three-dimensional (3D) using a modified gas-foaming technique. Porous three-dimensional (3D) silk fibroin (SF) scaffolds were fabricated by the SF fibers, which were extracted by the NaBH4 degumming method and NaBH4 gas-foaming approach. This study showed that higher salt concentrations, reaching 1.5% in a double bath, effectively removed sericin from silk fibroin, resulting in clean, smooth 3D scaffolds. These scaffolds were then fabricated using a freeze-drying method. The scaffolds were then submerged in solutions containing semen cuscutae (SC) and their surfaces were coated with various percentages of total flavonoids. The scaffolds had no toxicity to the cells in vitro. This work provides a new route for achieving a TFSC-loaded scaffold; it is proved that the coated silk fibroin fiber scaffold has excellent compatibility. Compared with non-drug-loaded silk scaffolds, drug-loaded silk scaffolds promote cell growth.

Calcium ion-triggered liquid-liquid phase separation of silk fibroin and spinning through acidification and shear stress

Many studies try to comprehend and replicate the natural silk spinning process due to its energy-efficient and eco-friendly process. In contrast to spider silk, the mechanisms of how silkworm silk fibroin (SF) undergoes liquid-liquid phase separation (LLPS) concerning the various environmental factors in the silk glands or how the SF coacervates transform into fibers remain unexplored. Here, we show that calcium ions, among the most abundant metal ions inside the silk glands, induce LLPS of SF under macromolecular crowded conditions by increasing both hydrophobic and electrostatic interactions between SF. Furthermore, SF coacervates assemble and further develop into fibrils under acidification and shear force. Finally, we prepare SF fiber using a pultrusion-based dry spinning, mirroring the natural silk spinning system. Unlike previous artificial spinning methods requiring concentrated solutions or harsh solvents, our process uses a less concentrated aqueous SF solution and minimal shear force, offering a biomimetic approach to fiber production.

Recent trends using natural polymeric nanofibers as supports for enzyme immobilization and catalysis

All the disciplines of science, especially biotechnology, have given continuous attention to the area of enzyme immobilization. However, the structural support made by material science intervention determines the performance of immobilized enzymes. Studies have proven that nanostructured supports can maintain better catalytic performance and improve immobilization efficiency. The recent trends in the application of nanofibers using natural polymers for enzyme immobilization have been addressed in this review article. A comprehensive survey about the immobilization strategies and their characteristics are highlighted. The natural polymers, e.g., chitin, chitosan, silk fibroin, gelatin, cellulose, and their blends with other synthetic polymers capable of immobilizing enzymes in their 1D nanofibrous form, are discussed. The multiple applications of enzymes immobilized on nanofibers in biocatalysis, biosensors, biofuels, antifouling, regenerative medicine, biomolecule degradation, etc.; some of these are discussed in this review article.

Immunizing lithium metal anodes against dendrite growth using protein molecules to achieve high energy batteries

The practical applications of lithium metal anodes in high-energy-density lithium metal batteries have been hindered by their formation and growth of lithium dendrites. Herein, we discover that certain protein could efficiently prevent and eliminate the growth of wispy lithium dendrites, leading to long cycle life and high Coulombic efficiency of lithium metal anodes. We contend that the protein molecules function as a “self-defense” agent, mitigating the formation of lithium embryos, thus mimicking natural, pathological immunization mechanisms. When added into the electrolyte, protein molecules are automatically adsorbed on the surface of lithium metal anodes, particularly on the tips of lithium buds, through spatial conformation and secondary structure transformation from α-helix to β-sheets. This effectively changes the electric field distribution around the tips of lithium buds and results in homogeneous plating and stripping of lithium metal anodes. Furthermore, we develop a slow sustained-release strategy to overcome the limited dispersibility of protein in the ether-based electrolyte and achieve a remarkably enhanced cycling performance of more than 2000 cycles for lithium metal batteries.

The practical application of lithium metal anodes in high-energy-density lithium metal batteries is hindered by the formation and growth of lithium dendrites. Here, authors report fibroin protein as an electrolyte additive to prevent and eliminate the growth of wispy lithium dendrites.

Synthesis and Characterization of Silk Ionomers for Layer-by-Layer Electrostatic Deposition on Individual Mammalian Cells

Nanocoating of individual mammalian cells with polymer layers has been of increasing interest in biotechnology and biomedical engineering applications. Electrostatic layer-by-layer (LbL) deposition of polyelectrolytes on negatively charged cell surfaces has been utilized for cell nanocoatings using synthetic or natural polymers with a net charge at physiological conditions. Here, our previous synthesis of silk-based ionomers through modification of silk fibroin (SF) with polyglutamate (PG) and polylysine (PL) was exploited for the nanocoating of mammalian cells. SF-PL constructs were cytotoxic to mammalian cells, thus an alternative approach for the synthesis of silk ionomers through carboxylation and amination of regenerated SF chains was utilized. Through the optimization of material properties and composition of incubation buffers, silk ionomers could be electrostatically assembled on the surface of murine fibroblasts and human mesenchymal stem cells (hMSCs) to form nanoscale multilayers without significantly impairing cell viability. The resulting silk-based protein nanoshells were transient and degraded over time, allowing for cell proliferation. The strategies presented here provide a basis for the cytocompatible nanoencapsulation of mammalian cells within silk-based artificial cell walls, with potential benefits for future studies on surface engineering of mammalian cells, as well as for utility in cell therapies, 3D printing, and preservation.

Molecular Mechanics of Beta-Sheets

β-Sheet protein structures and domains are widely found in biological materials such as silk. These assemblies play a major role in the extraordinary strength and unique properties of biomaterials. At the molecular level, the single β-sheet structure comprises polypeptide chains in zig-zag conformations that are held together by hydrogen bonds. β-sheet domains comprise multiple β-sheets that originate from hydrophobic interactions between sheets and are held together by van der Waals interactions. In this work, we introduce molecular models that capture the response of such domains upon mechanical loading and illustrate the mechanisms behind their collapse. We begin by modeling the force that is required to pull a chain out of a β-sheet. Next, we employ these models to study the behavior of β-sheets that are embedded into and connected to an amorphous protein matrix. We show that the collapse of a β-sheet occurs upon the application of a sufficiently high force that is transferred from the chains in the matrix to individual chains of the β-sheet structure and causes shear. With the aim of understanding the response of β-sheet domains, we derive models for the interactions between β-sheets. These enable the study of critical forces required to break such domains. As opposed to molecular dynamics simulations, the analysis in this work yields simple expressions that shed light on the relations between the nanostructure of β-sheet domains and their mechanical response. In addition, the findings of this work suggest how β-sheet domains can be strengthened.

Enzymatically crosslinked silk and silk-gelatin hydrogels with tunable gelation kinetics, mechanical properties and bioactivity for cell culture and encapsulation

Silk fibroin (SF) was enzymatically crosslinked with tyramine-substituted silk fibroin (SF-TA) or gelatin (G-TA) to fabricate hybrid hydrogels with tunable gelation kinetics, mechanical properties and bioactivity. Horseradish peroxidase (HRP)/hydrogen peroxide (H2O2) mediated crosslinking of SF in physiological buffers results in slow gelation and limited mechanical properties. Moreover, SF lacks cell attachment sequences, leading to poor cell-material interactions. These shortcomings can limit the uses of enzymatically crosslinked silk hydrogels in injectable tissue fillings, 3D bioprinting or cell microencapsulation, where rapid gelation and high bioactivity are desired. Here SF/SF-TA and SF/G-TA composite hydrogels were characterized for hydrogel properties and the influence of conjugated cyclic arginine-glycine-aspartic acid (RGD) peptide or G-TA content on bioactivity was explored. Both SF-TA and G-TA significantly increased gelation kinetics, improved mechanical properties and delayed enzymatic degradation in a concentration-dependent manner. β-Sheet formation and hydrogel stiffening were accelerated by SF-TA content but delayed by G-TA. Both cyclic RGD and G-TA significantly improved morphology and metabolic activity of human mesenchymal stem cells (hMSCs) cultured on or encapsulated in composite hydrogels. The hydrogel formulations introduced in this study provide improved control of gel formation and properties, along with biocompatible systems that can be utilized in tissue engineering and cell delivery applications.

Extreme Mechanical Behavior of Nacre-Mimetic Graphene-Oxide and Silk Nanocomposites

Biological materials have the ability to withstand extreme mechanical forces due to their unique multilevel hierarchical structure. Here, we fabricated a nacre-mimetic nanocomposite comprised of silk fibroin and graphene oxide that exhibits hybridized dynamic responses arising from alternating high-contrast mechanical properties of the components at the nanoscale. Dynamic mechanical behavior of these nanocomposites is assessed through a microscale ballistic characterization using a 7.6 μm diameter silica sphere moving at a speed of approximately 400 m/s. The volume fraction of graphene oxide in these composites is systematically varied from 0 to 32 vol % to quantify the dynamic effects correlating with the structural morphologies of the graphene oxide flakes. Specific penetration energy of the films rapidly increases as the distribution of graphene oxide flakes evolves from noninteracting, isolated sheets to a partially overlapping continuous sheet. The specific penetration energy of the nanocomposite at the highest graphene oxide content tested here is found to be significantly higher than that of Kevlar fabrics and close to that of pure multilayer graphene. This study evidently demonstrates that the morphologies of nanoscale constituents and their interactions are critical to realize scalable high-performance nanocomposites using typical nanomaterial constituents having finite dimensions.

Single Molecule Force Spectroscopy to Compare Natural versus Artificial Antibody-Antigen Interaction

Biorecognition is central to various biological processes and finds numerous applications in virtually all areas of chemistry, biology, and medicine. Artificial antibodies, produced by imprinting synthetic polymers, are designed to mimic the biological recognition capability of natural antibodies, while exhibiting superior thermal, chemical, and environmental stability compared to their natural counterparts. The binding affinity of the artificial antibodies to their antigens characterizes the biorecognition ability of these synthetic nanoconstructs and their ability to replace natural recognition elements. However, a quantitative study of the binding affinity of an artificial antibody to an antigen, especially at the molecular level, is still lacking. In this study, using atomic force microscopy-based force spectroscopy, the authors show that the binding affinity of an artificial antibody to an antigen (hemoglobin) is weaker than that of natural antibody. The fine difference in the molecular interactions manifests into a significant difference in the bioanalytical parameters of biosensors based on these recognition elements.

Programming function into mechanical forms by directed assembly of silk bulk materials

We report simple, water-based fabrication methods based on protein self-assembly to generate 3D silk fibroin bulk materials that can be easily hybridized with water-soluble molecules to obtain multiple solid formats with predesigned functions. Controlling self-assembly leads to robust, machinable formats that exhibit thermoplastic behavior consenting material reshaping at the nanoscale, microscale, and macroscale. We illustrate the versatility of the approach by realizing demonstrator devices where large silk monoliths can be generated, polished, and reshaped into functional mechanical components that can be nanopatterned, embed optical function, heated on demand in response to infrared light, or can visualize mechanical failure through colorimetric chemistries embedded in the assembled (bulk) protein matrix. Finally, we show an enzyme-loaded solid mechanical part, illustrating the ability to incorporate biological function within the bulk material with possible utility for sustained release in robust, programmably shapeable mechanical formats.

Self-assembly of regenerated silk fibroin from random coil nanostructures to antiparallel β-sheet nanostructures

In this work, we studied the effects of incubation concentration and time on the self-assembly behaviors of regenerated silk fibroin (RSF). Our results showed the assembly ways of RSF were concentration-dependent and there were four self-assembly ways of RSF: (i) At relatively low concentration (≤0.015%), RSF molecules assembled into protofilaments (random coil), and then the thickness decreased and the secondary conformation changed to antiparallel β-sheet; (ii) at the concentration of 0.015%, RSF molecules assembled into protofilaments (random coil), and then assembled into protofibrils (antiparallel β-sheet). The protofibrils experienced the appearance and disappearance of phase periodic intervals in turn; (iii) at the concentration of 0.03%, RSF molecules assembled into bead-like oligomers (random coil), and then assembled into protofibrils (antiparallel β-sheet), and finally the height and phase periodic intervals of RSF protofibrils disappeared in turn; and (iv) at the relatively high concentration (≥0.15%), RSF molecules assembled into protofilaments (random coil), then aggregated into blurry cuboid-like micelles (random coil), and finally self-arranged to form smooth and clear cuboid-like micelles (antiparallel β-sheet). These results provide useful insights into the process by which the RSF molecules self-assemble into protofilaments, protofibrils and micelles. Furthermore, our work will be beneficial to basic understanding of the nanoscale structure formations in different silk-based biomaterials.

Biopolymeric nanocomposites with enhanced interphases

Ultrathin and robust nanocomposite membranes were fabricated by incorporating graphene oxide (GO) sheets into a silk fibroin (SF) matrix by a dynamic spin-assisted layer-by-layer assembly (dSA-LbL). We observed that in contrast to traditional SA-LbL reported earlier fast solution removal during dropping of solution on constantly spinning substrates resulted in largely unfolded biomacromolecules with enhanced surface interactions and suppressed nanofibril formation. The resulting laminated nanocomposites possess outstanding mechanical properties, significantly exceeding those previously reported for conventional LbL films with similar composition. The tensile modulus reached extremely high values of 170 GPa, which have never been reported for graphene oxide-based nanocomposites, the ultimate strength was close to 300 MPa, and the toughness was above 3.4 MJ m(-3). The failure modes observed for these membranes suggested the self-reinforcing mechanism of adjacent graphene oxide sheets with strong 2 nm thick silk interphase composed mostly from individual backbones. This interphase reinforcement leads to the effective load transfer between the graphene oxide components in reinforced laminated nanocomposite materials with excellent mechanical strength that surpasses those known today for conventional flexible laminated carbon nanocomposites from graphene oxide and biopolymer components.

Tunable Thermoresponsiveness of Resilin via Coassembly with Rigid Biopolymers

The ability to tune the thermoresponsiveness of recombinant resilin protein, Rec1-resilin, through a facile coassembly system was investigated in this study. The effects of change in conformation and morphology with time and the responsive behavior of Rec1-resilin in solution were studied in response to the addition of a rigid model polypeptide (poly-l-proline) or a hydrophobic rigid protein (Bombyx mori silk fibroin). It was observed that by inducing more ordered conformations and increasing the hydrophobicity the lower critical solution temperature (LCST) of the system was tuned to lower values. Time and temperature were found to be critical parameters in controlling the coassembly behavior of Rec1-resilin in both the model polypeptide and more complex protein systems. Such unique properties are useful for a wide range of applications, including drug delivery and soft tissue engineering applications.

Tuning assembly and enzymatic degradation of silk/poly(N-vinylcaprolactam) multilayers via molecular weight and hydrophobicity

We report on enzymatically degradable nanothin coatings obtained by layer-by-layer (LbL) assembly of silk fibroin with poly(N-vinylcaprolactam) (PVCL) via hydrogen bonding and hydrophobic interactions. We found that both silk β-sheet content, controlled through dipping and spin-assisted LbL, and PVCL molecular weight regulate film thickness, microstructure, pH-stability, and biodegradability with a nanoscale precision. Thickness of (silk/PVCL) films increased with increase in PVCL molecular weight and decrease in deposition pH. The impact of assembly pH on film growth was more dramatic for dipped films. These systems show a significant rise in thickness with increase in PVCL molecular weight at pH < 5 but become independent on polymer chain length at pH ≥ 5. We also found that spin-assisted films exhibited a greater stability at elevated pH and against enzymatic degradation as compared to their dipped counterparts. For both film types, the pH and enzymatic stability was improved with increasing PVCL length and β-sheet content, indicating enhanced hydrophobic and hydrogen-bonded interactions between PVCL and silk. Finally, we fabricated spherical and cubical (silk/PVCL) LbL capsules of regulated permeability and enzymatic degradation. Our approach gives a unique opportunity to tune thickness, morphology, structure, and biodegradability rate of silk films and capsules by varying silk secondary structure and PVCL length. Accounting for all-aqueous fabrication and the biocompatibility of both polymers these biodegradable materials provide novel platforms for delivery systems and medical devices.

The influence of the hydrophilic-lipophilic environment on the structure of silk fibroin protein

The present study examines the influence of the hydrophilic-lipophilic environment, mediated by small molecules, on the structural changes in silk protein fibroin. Small molecules mediate the various hydrophilic-lipophilic balances (HLBs) that impact the organisation of silk protein chains. Changes in the silk fibroin structure due to additives are related to the HLB value. At HLB > 10, silk fibroin primarily forms Silk I crystalline structures. Small molecules with HLB < 8.9 primarily induce the formation of Silk II crystalline structures. When 8.9 < HLB < 10, the crystalline structure of silk is related to the content of small molecules. The Silk I structure is primarily formed when the content of small molecules is low, whereas the Silk II structure is formed when the small molecule content is high. The structure of silk fibroin is maintained by regulating the HLB in the fibroin environment. This type of control for the functional design of materials may play a role in fine-tuning the biomaterial properties of silk fibroin protein.

Rheology of reconstituted silk fibroin protein gels: the epitome of extreme mechanics

In nature, silk fibroin proteins assemble into hierarchical structures with dramatic mechanical properties. With the hope of creating new classes of on demand silk-based biomaterials, Bombyx mori silk is reconstituted back into stable aqueous solutions that can be reassembled into functionalized materials; one strategy for reassembly is electrogelation. Electrogels (e-gels) are particularly versatile and can be produced using electrolysis with small DC electric fields. We characterize the linear and nonlinear rheological behavior of e-gels to provide fundamental insights into these distinct protein-based materials. We observe that e-gels form robust biopolymer networks that exhibit distinctive strain hardening and are recoverable from strains as large as γ=27, i.e. 2700%. We propose a simple microscopic model that is consistent with local restructuring of single proteins within the e-gel network.

Probing of polymer surfaces in the viscoelastic regime

In this Feature Article, we discussed the experimental and modeling methods and analyzed the limitations of the surface probing of nanomechanical properties of polymeric and biological materials in static and dynamic regimes with atomic force microscopy (AFM), which are widely utilized currently. To facilitate such measurements with minimized ambiguities, in this study we present a combined method to evaluate the viscoelastic properties of compliant polymeric materials. We collected force-distance data in the static regime for a benchmark polymer material (poly(n-butyl methacrylate)) with an easily accessible glass-transition temperature (about 25 °C) at different loading rates and different temperatures across the glassy state, glass-transition region, and rubbery state. For this analysis, we exploited a Johnson-modified Sneddon's approach in a combination with the standard linear solid model. Critical experimental steps suggested for robust probing are (i) the use of a tip with a well-characterized parabolic shape, (ii) probing in a liquid environment in order to reduce jump-in phenomenon, and (iii) minute indentations to ensure the absence of plastic deformation. Whereas the standard Sneddon's model generates quantitatively adequate elastic modulus values below and above the glass transition, this traditional approach can significantly underestimate actual modulus values in the vicinity of the glass-transition region (15 °C above or below Tg), with major deviations occurring at the loss tangent peak. The analysis of the experimental data with Sneddon's model for the elastic region (glassy and rubbery states) and Johnson's model for the viscoelastic region allowed for the restoration of the universal master curve and the evaluation of the storage modulus, loss modulus, loss tangent, relaxation times, and activation energies of the polymer surface across the glass-transition region and at relevant loading rates.

An energetic model for macromolecules unfolding in stretching experiments

We propose a simple approach, based on the minimization of the total (entropic plus unfolding) energy of a two-state system, to describe the unfolding of multi-domain macromolecules (proteins, silks, polysaccharides, nanopolymers). The model is fully analytical and enlightens the role of the different energetic components regulating the unfolding evolution. As an explicit example, we compare the analytical results with a titin atomic force microscopy stretch-induced unfolding experiment showing the ability of the model to quantitatively reproduce the experimental behaviour. In the thermodynamic limit, the sawtooth force-elongation unfolding curve degenerates to a constant force unfolding plateau.

Permeability and micromechanical properties of silk ionomer microcapsules

We studied the pH-responsive behavior of layer-by-layer (LbL) microcapsules fabricated from silk fibroin chemically modified with different poly amino acid side chains: cationic (silk-poly L-lysine, SF-PL) or anionic (silk-poly-L-glutamic acid, SF-PG). We observed that stable ultrathin shell microcapsules can be assembled with a dramatic increase in swelling, thickness, and microroughness at extremely acidic (pH < 2.5) and basic (pH > 11.0) conditions without noticeable disintegration. These changes are accompanied by dramatic changes in shell permeability with a 2 orders of magnitude increase in the diffusion coefficient. Moreover, the silk ionomer shells undergo remarkable softening with a drop in Young's modulus by more than 1 order of magnitude due to the swelling, stretching, and increase in material porosity. The ability to control permeability and mechanical properties over a wide range for the silk-based microcapsules, with distinguishing stability under harsh environmental conditions, provides an important system for controlled loading and release and applications in bioengineering.

Silk layering as studied with neutron reflectivity

Neutron reflectivity (NR) measurements of ultrathin surface films (below 30 nm) composed of Bombyx mori silk fibroin protein in combination with atomic force microscopy and ellipsometry were used to reveal the internal structural organization in both dry and swollen states. Reconstituted aqueous silk solution deposited on a silicon substrate using the spin-assisted layer-by-layer (SA-LbL) technique resulted in a monolayer silk film composed of random nanofibrils with constant scattering length density (SLD). However, a vertically segregated ordering with two different regions has been observed in dry, thicker, seven-layer SA-LbL silk films. The vertical segregation of silk multilayer films indicates the presence of a different secondary structure of silk in direct contact with the silicon oxide surface (first 6 nm). The layered structure can be attributed to interfacial β-sheet crystallization and the formation of well-developed nanofibrillar nanoporous morphology for the initially deposited silk surface layers with the preservation of less dense, random coil secondary structure for the layers that follow. This segregated structure of solid silk films defines their complex nonuniform behavior in the D(2)O environment with thicker silk films undergoing delamination during swelling. For a silk monolayer with an initial thickness of 6 nm, we observed the increase in the effective thickness by 60% combined with surprising decrease in density. Considering the nanoporous morphology of the hydrophobic silk layer, we suggested that the apparent increase in its thickness in liquid environment is caused by the air nanobubble trapping phenomenon at the liquid-solid interface.

Silk self-assembly mechanisms and control from thermodynamics to kinetics

Silkworms and spiders generate fibers that exhibit high strength and extensibility. The underlying mechanisms involved in processing silk proteins into fiber form remain incompletely understood, resulting in the failure to fully recapitulate the remarkable properties of native fibers in vitro from regenerated silk solutions. In the present study, the extensibility and high strength of regenerated silks were achieved by mimicking the natural spinning process. Conformational transitions inside micelles, followed by aggregation of micelles and their stabilization as they relate to the metastable structure of silk are described. Subsequently, the mechanisms to control the formation of nanofibrous structures were elucidated. The results clarify that the self-assembly of silk in aqueous solution is a thermodynamically driven process where kinetics also play a key role. Four key factors, molecular mobility, charge, hydrophilic interactions, and concentration underlie the process. Adjusting these factors can balance nanostructure and conformational composition, and be used to achieve silk-based materials with properties comparable to native fibers. These mechanisms suggest new directions to design silk-based multifunctional materials.

Robust and responsive silk ionomer microcapsules

We demonstrate the assembly of extremely robust and pH-responsive thin shell LbL microcapsules from silk fibroin counterparts modified with poly(lysine) and poly(glutamic) acid, which are based on biocompatible silk ionomer materials in contrast with usually exploited synthetic polyelectrolytes. The microcapsules are extremely stable in an unusually wide pH range from 1.5 to 12.0 and show a remarkable degree of reversible swelling/deswelling response in dimensions, as exposed to extreme acidic and basic conditions. These changes are accompanied by reversible variations in shell permeability that can be utilized for pH-controlled loading and unloading of large macromolecules. Finally, we confirmed that these shells can be utilized to encapsulate yeast cells with a viability rate much higher than that for traditional synthetic polyelectrolytes.

The toughening mechanism of nacre and structural materials inspired by nacre

The structure and the toughening mechanism of nacre have been the subject of intensive research over the last 30 years. This interest originates from nacre's excellent combination of strength, stiffness and toughness, despite its high, for a biological material, volume fraction of inorganic phase, typically 95%. Owing to the improvement of nanoscale measurement and observation techniques, significant progress has been made during the last decade in understanding the mechanical properties of nacre. The structure, microscopic deformation behavior and toughening mechanism on the order of nanometers have been investigated, and the importance of hierarchical structure in nacre has been recognized. This research has led to the fabrication of multilayer composites and films inspired by nacre with a layer thickness below 1 μm. Some of these materials reproduce the inorganic/organic interaction and hierarchical structure beyond mere morphology mimicking. In the first part of this review, we focus on the hierarchical architecture, macroscopic and microscopic deformation and fracture behavior, as well as toughening mechanisms in nacre. Then we summarize recent progress in the fabrication of materials inspired by nacre taking into consideration its mechanical properties.

Co-cross-linking silk matrices with silica nanostructures for robust ultrathin nanocomposites

We report on a novel assembly approach to fabricate ultrathin robust freely standing nanocomposite membranes. The materials are composed of a pre-cross-linked silk fibroin matrix with incorporated silica nanoparticles with silsesquioxane cores (POSS) or clay nanoplatelets. These reinforced silk membranes have enhanced mechanical properties as compared to traditional silk-based nanocomposites reported previously. Up to 6-fold and 8-fold increase in elastic modulus and toughness, respectively, were found for these nanocomposites. In contrast, traditional LbL-assembled nanocomposites showed only a 3-fold increase in mechanical strength. The silk nanocomposites obtained also revealed excellent optical transparency in the visible region especially if reinforced with POSS nanoparticles, which suggests their utility as low cost, nontoxic, and easily scalable reinforced biomaterials for mechanically demanding applications.

Unfolding the A2 domain of von Willebrand factor with the optical trap

Von Willebrand factor (VWF) is a multimeric plasma glycoprotein involved in both hemostasis and thrombosis. VWF conformational changes, especially unfolding of the A2 domain, may be required for efficient enzymatic cleavage in vivo. It has been shown that a single A2 domain unfolds at most probable unfolding forces of 7-14 pN at force loading rates of 0.35-350 pN/s and A2 unfolding facilitates A2 cleavage in vitro. However, it remains unknown how much force is required to unfold the A2 domain in the context of a VWF multimer where A2 may be stabilized by other domains like A1 and A3. With the optical trap, we stretched VWF multimers and a poly-protein (A1A2A3)3 that contains three repeats of the triplet A1A2A3 domains at constant speeds of 2000 nm/s and 400 nm/s, respectively, which yielded corresponding average force loading rates of 90 and 22 pN/s. We found that VWF multimers became stiffer when they were stretched and extended by force. After force increased to a certain level, sudden extensional jumps that signify domain unfolding were often observed. Histograms of the unfolding force and the unfolded contour length showed two or three peaks that were integral multiples of approximately 21 pN and approximately 63 nm, respectively. Stretching of (A1A2A3)3 yielded comparable distributions of unfolding force and unfolded contour length, showing that unfolding of the A2 domain accounts for the behavior of VWF multimers under tension. These results show that the A2 domain can be indeed unfolded in the presence of A1, A3, and other domains. Compared with the value in the literature, the larger most probable unfolding force measured in this study suggests that the A2 domain is mechanically stabilized by A1 or A3 although variations in experimental setups and conditions may complicate this interpretation.

Layer-by-layer deposited chitosan/silk fibroin thin films with anisotropic nanofiber alignment

Chitosan/silk fibroin multilayer thin films were assembled using layer-by-layer deposition. The resultant multilayer films contained nanofibers aligned parallel to the dipping direction. Fiber deposition and orientation was enabled uniquely by a judicious choice of solvent and drying conditions and layer-by-layer assembly with chitosan. The deposition of oriented nanofibers was found to be the result of a unique combination of layer-by-layer and Langmuir-Blodgett type processing. Fiber orientation was confirmed by fast Fourier transform (FFT) analysis of optical micrographs and atomic force microscopy (AFM). Bidirectional fiber alignment was realized by rotating the substrate between multilayer deposition steps. Infrared spectroscopy revealed that the silk fibroin adopted the silk II secondary structure in the deposited films. We anticipate that these anisotropic films are able to combine the biocompatibility of a natural polymer system with the mechanical strength of SF, two properties useful in many biological applications including scaffolds suitable for guiding cell attachment and spreading.

Stabilization of enzymes in silk films

Material systems are needed that promote stabilization of entrained molecules, such as enzymes or therapeutic proteins, without destroying their activity. We demonstrate that the unique structure of silk fibroin protein, when assembled into the solid state, establishes an environment that is conducive to the stabilization of entrained proteins. Enzymes (glucose oxidase, lipase, and horseradish peroxidase) entrapped in these films over 10 months retained significant activity, even when stored at 37 degrees C, and in the case of glucose oxidase did not lose any activity. Further, the mode of processing of the silk protein into the films could be correlated to the stability of the enzymes. The relationship between processing and stability offers a large suite of conditions within which to optimize such stabilization processes. Overall, the techniques reported here result in materials that stabilize enzymes to an extent, without the need for cryoprotectants, emulsifiers, covalent immobilization, or other treatments. Further, these systems are amenable to optical applications and characterization, environmental distribution without refrigeration, are ingestible, and offer potential use in vivo, because silk materials are biocompatible and FDA approved, degradable with proteases, and currently used in biomedical devices.

Surface engineering of titanium thin films with silk fibroin via layer-by-layer technique and its effects on osteoblast growth behavior

The objective of the present study was to surface modify the titanium thin films to improve its biocompatibility. A layer-by-layer (LBL) self-assembly technique, based on the electrostatic interactions mediated adsorption of chitosan (Chi) and silk fibroin (SF), was used leading to the formation of multilayers on the titanium thin film surfaces. The surface chemistry and wettability of LBL films were investigated by X-ray photoelectron spectroscopy (XPS), water contact angle measurement, and atomic force microscopy, respectively. XPS and contact angle measurement results indicated that a full SF/Chi pair film was formed after the deposition layers of PEI/(SF/Chi)(2) on the titanium film surfaces. The topographies of multilayered films were directly related to the corresponding outmost layer components. The build-up of such SF/Chi pair films on titanium films may in turn affect the biocompatibility of the modified titanium films. Therefore, an in vitro investigation was performed to confirm this hypothesis. Cell proliferation, cell viability, DNA synthesis as well as differentiation function (alkaline phosphatase) of osteoblasts on LBL-modified titanium films and control samples were investigated, respectively. Osteoblasts cultured on modified titanium films was found to be higher proliferation tendency than that on control (p < 0.05). Cell viability, alkaline phosphatase as well as DNA synthesis measurement indicated that osteoblasts on LBL-modified films were greater (p < 0.05 or p < 0.01) than the control, respectively. These results suggest that surface engineering of titanium was successfully achieved via LBL deposition of Chi/SF pairs, and enhanced its cell biocompatibility. The approach presented in the study may be exploited as an efficient alternative for surface engineering of titanium-based implants.