Synthesis and physical gels of pH- and thermo-responsive tertiary amine methacrylate based ABA triblock copolymers and drug release studies

pH-Responsive, Thermo-Resistant Poly(Acrylic Acid)-g-Poly(boc-L-Lysine) Hydrogel with Shear-Induced Injectability

In this study we report the rheological behavior of aqueous solutions of an amphiphilic graft copolymer constituting a polyacrylic acid (PAA) grafted by poly(boc-L-lysine), P(b-LL). Due to the highly hydrophobic nature of the grafted chains, the copolymer self-assembles spontaneously in aqueous media forming three-dimensional (3D) finite size networks (microgels). The rheological analysis demonstrated that the copolymer behaves as a strong elastic hydrogel, showing characteristics of a "frozen" network. Moreover, it is noteworthy that the formulation shows the above-described characteristics in very small concentrations (0.25-1.20 wt%) compared to other naturally cross-linked hydrogels that have been studied so far. Concentration significantly affects the rheological properties of the hydrogel, showing considerable increase in elastic modulus, following the scaling law G'~C^1.93. At the same time, the hydrogels can be described as intelligent stimuli-responsive systems, showing pH and shear responsiveness as well as stability with temperature changes. Thanks to the pH dependance of the degree of ionization of the weak polyelectrolyte PAA backbone, stiffness and swelling of the hydrogels can be tuned effectively by adjusting the pH conditions. Simulating conditions such as those of injection through a 28-gauge syringe needle, the gel demonstrates excellent response to shear, due to its remarkable shear thinning behavior. The combination of pH-sensitivity and shear responsiveness leads to excellent injectability and self-healing properties, given that it flows easily upon applying a low stress and recovers instantly in the site of injection. Therefore, the physically cross-linked PAA-g-P(b-LL) hydrogel exhibits remarkable features, namely biocompatibility, biodegradability of cross-links, pH responsiveness, shear-induced injectability and instantaneous self-healing, making it a potential candidate for various biomedical applications.

Phase Separation of Aqueous Poly(diisopropylaminoethyl methacrylate) upon Heating

Poly(diisopropylaminoethyl methacrylate) (PDPA) is a pH- and thermally responsive water-soluble polymer. This study deepens the understanding of its phase separation behavior upon heating. Phase separation upon heating was investigated in salt solutions of varying pH and ionic strength. The effect of the counterion on the phase transition upon heating is clearly demonstrated for chloride-, phosphate-, and citrate-anions. Phase separation did not occur in pure water. The buffer solutions exhibited similar cloud points, but phase separation occurred in different pH ranges and with different mechanisms. The solution behavior of a block copolymer comprising poly(dimethylaminoethyl methacrylate) (PDMAEMA) and PDPA was investigated. Since the PDMAEMA and PDPA blocks phase separate within different pH- and temperature ranges, the block copolymer forms micelle-like structures at high temperature or pH.

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Current Designs and Developments of Fucoidan-based Formulations for Cancer Therapy

BACKGROUND

Natural nanostructure materials have been involved in antitumor drug delivery systems due to their biocompatibility, biodegradation, and bioactive properties.

METHODS

These materials have contributed to advanced drug delivery systems in the roles of both bioactive compounds and delivery nanocarriers. Fucoidan, a valuable ocean material used in drug delivery systems, has been exploited in research on cancer and a variety of other diseases.

RESULTS

Although the uniqueness, structure, properties, and health benefits of fucoidan have been mentioned in various prominent reviews, current developments and designs of fucoidan-based formulations still need to be assessed to further develop an effective anticancer therapy. In this review, current important formulations using fucoidan as a functional material and as an anticancer agent will be discussed. This article will also provide a brief principle of the methods that incorporate functional nanostructure materials in formulations exploiting fucoidan.

CONCLUSION

Current research and future perspectives on the use of fucoidan in anticancer therapy will advance innovative and important products for clinical uses.

Dual pH-Responsive Polymer Nanogels with a Core-Shell Structure for Improved Cell Association

We report the fabrication of polymer nanogels with a pH-responsive core and a pH-sheddable shell and investigate the pH-dependent cell association of the pH-responsive polymer nanogels. The pH-responsive core composed of poly(2-diisopropylaminoethyl methacrylate) (PDPA) with a pK_a ≈ 6.2 was synthesized by using polymerization in emulsion droplets. The pH-sheddable poly(ethylene glycol) (PEG) shell was coated on the amine-modified PDPA nanogels by an acid-degradable amide bond. The PEG shell is cleavable in response to the acidic tumor microenvironment, and subsequently, the surface charge of the nanogels can be reversed, which effectively enhances cellular association of these nanogels. The reported pH-responsive polymer nanogels provide a promising way for the better understanding of bio-nano interactions and potentially enrich the application of therapeutic delivery for cancer therapy.

Reactivity Control of Polymer Functional Groups by Altering the Structure of Thermoresponsive Triblock Copolymers

A thermoresponsive ABA triblock copolymer bearing an aldehyde group on the thermoresponsive A segments was synthesized. The polymer formed a micellar assembly due to the hydrophobic interactions of the thermoresponsive segment above the lower critical solution temperature (LCST). In contrast, the ABA polymer assembly decomposed upon lowering the temperature below the LCST. Using this structural change, the reactivity of the aldehyde group toward primary amines of albumin and poly(allylamine) was investigated. When the ABA polymer assembly and reactant were mixed above the LCST, Schiff base formation was suppressed because of the aldehyde group being protected by the hydrophobic thermoresponsive core. In contrast, Schiff base formation between the ABA triblock copolymer and the primary amine moiety on the molecules was confirmed below the LCST. The reactivity of the aldehyde functional group can therefore be controlled by altering the structure of the thermoresponsive ABA polymer.

Synthesis and evaluation of injectable thermosensitive penta-block copolymer hydrogel (PNIPAAm-PCL-PEG-PCL-PNIPAAm) and star-shaped poly(CL─CO─LA)-b-PEG for wound healing applications

BACKGROUND

Loss of skin integrity due to injury, burning, or illness makes the development of new treatment options necessary. Skin tissue engineering provides some solutions for these problems.

OBJECTIVE

The potential of a biodegradable star-shaped copolymer [Poly(CL─CO─LA)-b-PEG] and penta-block copolymer hydrogel (PNIPAAm-PCL-PEG-PCL-PNIPAAm) was assessed for skin tissue engineering applications.

METHODS

Two copolymers were synthesized for cellular culture scaffolds and their mechanical properties were compared. The resulting star-shaped copolymer and thermosensitive penta-block copolymer were characterized using Fourier transform infrared and nuclear magnetic resonance spectroscopy. The crystallizability of the two copolymers was analyzed using X-ray diffraction. The resulting thermosensitive penta-block copolymer was evaluated by differential thermal analysis, differential scanning calorimetry and thermogravimetric analysis. Scanning electron microscopy and in vitro degradation of the polymer network in phosphate buffer solutions (pH 7.4) at 37°C were also examined. The pore size of the gels was calculated with Image Analyzer software. Finally, the cytotoxic, morphological, and gene expression effects of copolymers on the skin fibroblast were evaluated.

RESULTS

The experiments showed that the PNIPAAm-PCL-PEG-PCL-PNIPAAm polymer with the right composition and the expected molecular weight was achieved. The hydrogel had less crystallizability compared with its precursors. The resulting thermosensitive hydrogel had a three-dimensional structure with interconnected pores that mimicked the extracellular matrix. The control of the degradability rate can be possible by weight percent changes. The pore size correlated with the polymer concentration in aqueous solution and the pore sizes of the 20 wt% hydrogel were better for fibroblast cultivation than those of the 10 wt% hydrogel. Cell proliferation on the 20% gel was more than that of the 10% gel. The hydrogel not only preserved the viability and phenotypical morphology of the entrapped cells but also stimulated the initial cell-cell interactions and proliferation of fibroblasts. The hydrogel did not influence cell conformation and this property of the polymer underlined its safety. Cells seeded on this copolymer showed a normal and spear shape and formed a focal adhesion with the hydrogel surface. Notably, the hydrogel increased collagen I α1 and collagen III mRNAs expression.

CONCLUSION

Due to the low molecular weight and poor mechanical strength of the star-shaped copolymer, it was not considered for fabrication of the scaffolds for wound healing. The biodegradable, biocompatible, injectable and thermosensitive PNIPAAm-PCL-PEG-PCL-PNIPAAm hydrogel in 20 wt% demonstrated a desirable potential for future application as a cell scaffold in skin tissue engineering and wound healing.

Production of LMWH-conjugated core/shell hydrogels encapsulating paclitaxel for transdermal delivery: In vitro and in vivo assessment

Topical applications that reduce systemic toxic effects while increasing therapeutic efficacy are a promising alternative strategy. The aim of this study was to provide an enhanced transdermal delivery of low molecular weight heparin (LMWH) through the stratum corneum by using cationic carrier as a novel permeation enhancer. Recent studies have shown that heparin-conjugated biomaterials can be effective in inhibiting tumor growth during cancer treatment due to their high ability to bind growth factors. Paclitaxel (PCL) was co-encapsulated into the same cationic carrier for the purpose of improving of therapeutic efficacy for a combined cancer treatment with LMWH. In vitro and in vivo studies showed that the LMWH and PCL release was significantly affected by polymer molecular weight and block composition. Skin penetration tests have indicated that larger amounts of LMWH were absorbed from LMWH-gel conjugate through SC, than aqueous formula. However, it was found that the plasma transition of LMWH released from gel conjugate was lower compared to the plasma concentration of LMWH released from aqueous solution. It is recommended that PCL-loaded LMWH-conjugated core/shell hydrogels can be used as promising drug release systems for transdermal applications that can improve therapeutic efficacy and reduce side effects in a combined cancer treatment.

A novel rutin-fucoidan complex based phytotherapy for cervical cancer through achieving enhanced bioavailability and cancer cell apoptosis

Recent studies on flavonoids forming complexes with macromolecules attract researchers due to their enhanced bioavailability as well as chemo-preventive efficacy. In this study, a flavonoid rutin (Ru) is non-covalently complexed with fucoidan (Fu) using the functional groups to obtain a therapeutic polymeric complex overcoming the limitations of bioavailability of rutin. The prepared novel rutin-fucoidan (Ru-Fu) complex is characterized for spectroscopic features, particle size and distribution analysis by DLS. It is shown that the complex displayed the nanostructural features that are different from that of the usual rutin-fucoidan mixture. The studies on drug release profiles at different pH (5.5, 6.8 and 7.4) show that the sustained release of compounds from complex occurs preferentially at the desired endosomal pH (5.5). Further, the chemopreventive potential of Ru-Fu complex is investigated against HeLa cells by cellular apoptotic assays and flow cytometric analysis. It showed that the complex is able to disrupt cell cycle regulation and has the ability to induce cellular apoptosis via nuclear fragmentation, ROS generation and mitochondrial potential loss. In vitro cell viability assay with Ru-Fu complex shows that the complex is biocompatible on normal cells. The hemolysis assay also reveals that the complex does not release hemoglobin from human red blood cells (RBCs). Thus, the study is envisaged to open up interests for developing such formulations against cervical cancer and other cancers.

Fabrication of hybrid crosslinked network with buffering capabilities and autonomous strengthening characteristics for dental adhesives

Ingress of bacteria and fluids at the interfacial gaps between the restorative composite biomaterial and the tooth structure contribute to recurrent decay and failure of the composite restoration. The inability of the material to increase the pH at the composite/tooth interface facilitates the outgrowth of bacteria. Neutralizing the microenvironment at the tooth/composite interface offers promise for reducing the damage provoked by cariogenic and aciduric bacteria. We address this problem by designing a dental adhesive composed of hybrid network to provide buffering and autonomous strengthening simultaneously. Two amino functional silanes, 2-hydroxy-3-morpholinopropyl (3-(triethoxysilyl)propyl) carbamate and 2-hydroxy-3-morpholinopropyl (3-(trimethoxysilyl)propyl) carbamate were synthesized and used as co-monomers. Combining free radical initiated polymerization (polymethacrylate-based network) and photoacid-induced sol-gel reaction (polysiloxane) results in the hybrid network formation. Resulting formulations were characterized with regard to real-time photo-polymerization, water sorption, leached species, neutralization, and mechanical properties. Results from real-time FTIR spectroscopic studies indicated that ethoxy was less reactive than methoxy substituent. The neutralization results demonstrated that the methoxy-containing adhesives have acute and delayed buffering capabilities. The mechanical properties of synthetic copolymers tested in dry conditions were improved via condensation reaction of the hydrolyzed organosilanes. The leaching from methoxy containing copolymers was significantly reduced. The sol-gel reaction provided a chronic and persistent reaction in wet condition-performance that offers potential for reducing secondary decay and increasing the functional lifetime of dental adhesives.

STATEMENT OF SIGNIFICANCE

The interfacial gaps between the restorative composite biomaterial and the tooth structure contributes to recurrent decay and failure of the composite restoration. The inability of the material to increase the pH at the composite/tooth interface facilitates the outgrowth of more cariogenic and aciduric bacteria. This paper reports a novel, synthetic resin that provides buffering capability and autonomous strengthening characteristics. In this work, two amino functional silanes were synthesized and the effect of alkoxy substitutions on the photoacid-induced sol-gel reaction was investigated. We evaluated the neutralization capability (monitoring the pH of lactic acid solution) and the autonomous strengthening property (monitoring the mechanical properties of the hybrid copolymers under wet conditions and quantitatively analyzing the leachable species by HPLC). The novel resin investigated in this study offers the potential benefits of reducing the risk of recurrent decay and prolonging the functional lifetime of dental adhesives.

Thermo-responsive gels based on supramolecular assembly of an amidoamine and citric acid

In this work, we report the formation of a novel, aqueous-based thermo-responsive, supramolecular gelling system prepared by a convenient and efficient self-assembly of a long-chain amino-amide and citric acid. To determine the viscosity behavior and to gain insights into the gelation mechanism, a complementary combination of techniques, including Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic light scattering (DLS), and sinusoidal oscillatory tests, were used. The supramolecular gelator exhibited remarkably reversible sol-gel transitions induced by temperature at 76 °C. At a concentration of 5 wt%, the zero-frequency viscosity of the supramolecular system increased by about four orders of magnitude (from 4.2 to 12 563 Pa s) by changing the temperature from 23 °C to 76 °C. The viscous nature of the supramolecular gel could be preserved up to 90 °C. The synergistic combination of the hydrogen bonding between amino and carboxylic acid groups and the electrostatic interactions arising from the protonation of the amino-group and the deprotonation of carboxylic acid groups enhanced at higher temperatures is presumably responsible for the thermo-responsive behavior. We anticipate that these supramolecular gelators can be beneficial in various applications such as hydrogel scaffolds for regenerative medicine, personal care products and cosmetics, and enhanced oil recovery as viscosity modifiers.

Nanostructured DPA-MPC-DPA triblock copolymer gel for controlled drug release of ketoprofen and spironolactone

OBJECTIVE

Uncontrolled rapid release of drugs can reduce their therapeutic efficacy and cause undesirable toxicity; however, controlled release from reservoir materials helps overcome this issue. The aims of this study were to determine the release profiles of ketoprofen and spironolactone from a pH-responsive self-assembling DPA-MPC-DPA triblock copolymer gel and elucidate underlying physiochemical properties.

METHODS

Drug release profiles from DPA₅₀ -MPC₂₅₀ -DPA₅₀ gel (pH 7.5), over 32 h (37 °C), were determined using UV-Vis spectroscopy. Nanoparticle size was measured by dynamic light scattering (DLS) and critical micelle concentration (CMC) by pyrene fluorescence. Polymer gel viscosity was examined via rheology, nanoparticle morphology investigated using scanning transmission electron microscopy (STEM) and the gel matrix observed using cryo-scanning electron microscopy (Cryo-SEM).

KEY FINDINGS

DPA₅₀ -MPC₂₅₀ -DPA₅₀ copolymer (15% w/v) formed a free-standing gel (pH 7.5) that controlled drug release relative to free drugs. The copolymer possessed a low CMC, nanoparticle size increased with copolymer concentration, and DLS data were consistent with STEM. The gel displayed thermostable viscosity at physiological temperatures, and the gel matrix was a nanostructured aggregation of smaller nanoparticles.

CONCLUSIONS

The DPA₅₀ -MPC₂₅₀ -DPA₅₀ copolymer gel could be used as a drug delivery system to provide the controlled drug release of ketoprofen and spironolactone.

pH-Responsive polymers

This review summarizes pH-responsive monomers, polymers and their derivative nano- and micro-structures including micelles, cross-linked micelles, microgels and hydrogels.

Recent trends in pH/thermo-responsive self-assembling hydrogels: from polyions to peptide-based polymeric gelators

In this article, we highlight some recent developments in "smart" physical hydrogels achieved by self-assembling of block type macromolecules. More precisely we focus on two interesting types of gelators namely conventional ionic (or ionogenic) block copolymers and peptide-based polymers having as a common feature their responsiveness to pH and/or temperature which are the main triggers used for potential biomedical applications. Taking advantage of the immense skills of conventional block copolymer hydrogelators, namely macromolecular design, self-assembling mechanism, gel rheological properties, responsiveness to various triggers and innovative applications, the development of novel self-assembling gelators, integrating the new knowledge emerging from the peptide-based systems, opens new horizons towards bio-inspired technologies.

One-pot preparation of BAB triblock copolymer nano-objects through bifunctional macromolecular RAFT agent mediated dispersion polymerization

Nano-assemblies of a BAB triblock copolymer containing a solvophilic A block and two solvophobic B blocks were prepared through dispersion RAFT polymerization.

Compositional design and optimization of dentin adhesive with neutralization capability

OBJECTIVES

The objective of this work was to investigate the polymerization behavior, neutralization capability, and mechanical properties of dentin adhesive formulations with the addition of the tertiary amine co-monomer, 2-N-morpholinoethyl methacrylate (MEMA).

METHODS

A co-monomer mixture based on HEMA/BisGMA (45/55, w/w) was used as a control adhesive. Compared with the control formulation, the MEMA-containing adhesive formulations were characterized comprehensively with regard to water miscibility of liquid resin, water sorption and solubility of cured polymer, real-time photopolymerization kinetics, dynamic mechanical analysis (DMA), and modulated differential scanning calorimetry (MDSC). The neutralization capacity was characterized by monitoring the pH shift of 1mM lactic acid (LA) solution, in which the adhesive polymers were soaked.

RESULTS

With increasing MEMA concentrations, experimental copolymers showed higher water sorption, lower glass transition temperature and lower crosslinking density compared to the control. The pH values of LA solution gradually increased from 3.5 to about 6.0-6.5 after 90 days. With the increase in crosslinking density of the copolymers, the neutralization rate was depressed. The optimal MEMA concentration was between 20 and 40 wt%.

CONCLUSIONS

As compared to the control, the results indicated that the MEMA-functionalized copolymer showed neutralization capability. The crosslinking density of the copolymer networks influenced the neutralization rate.

Macro-RAFT agent mediated dispersion polymerization: the monomer concentration effect on the morphology of the in situ synthesized block copolymer nano-objects

The great effect of the monomer concentration on the block copolymer morphology under dispersion RAFT polymerization is found and demonstrated.

Improvement of the control over SARA ATRP of 2-(diisopropylamino)ethyl methacrylate by slow and continuous addition of sodium dithionite

The kinetics and detailed mechanism of SARA ATRP of 2-(diisopropylamino)ethyl methacrylate (DPA) were investigated.

Synthesis of well-defined functionalized poly(2-(diisopropylamino)ethyl methacrylate) using ATRP with sodium dithionite as a SARA agent

2-(Diisopropylamino)ethyl methacrylate was polymerized by Atom Transfer Radical Polymerization using sodium dithionite as a reducing agent and supplemental activator with a Cu(ii)Br₂/Me₆TREN catalytic system.

Dispersion RAFT polymerization: comparison between the monofunctional and bifunctional macromolecular RAFT agents

The dispersion RAFT polymerizations mediated with monofunctional and bifunctional macro-RAFT agents were comparatively studied, in which different block copolymer morphologies were detected.

Double Responsive Hydrogels based on Tertiary Amine Methacrylate Star Block Copolymers

Double hydrophilic stimuli-responsive star block copolymers with poly(2-(dimethylamino)ethyl methacrylate) (PDMA) inner blocks and poly(2-(diethylamino)ethyl methacrylate) (PDEA) outer blocks were synthesized using ATRP. Different multifunctional initiators based on sugar scaffolds were employed in a core-first approach with sequential polymerization of both blocks yielding stars with 4 and 6 arms, respectively, and varying length of the PDEA outer block. The star block copolymers show pH- and temperature-responsive aggregation as revealed by dynamic light scattering and turbidimetry. The impact of pH, PDEA block length and arm number on the gelation behavior was investigated by tube inversion and rheology.