Microfluidic synthesis of macroporous polymer immunobeads

Preparation strategy of hydrogel microsphere and its application in skin repair

In recent years, hydrogel microsphere has attracted much attention due to its great potential in the field of skin repair. This paper reviewed the recent progress in the preparation strategy of hydrogel microsphere and its application in skin repair. In this review, several preparation methods of hydrogel microsphere were summarized in detail. In addition, the related research progress of hydrogel microspheres for skin repair was reviewed, and focused on the application of bioactive microspheres, antibacterial microspheres, hemostatic microspheres, and hydrogel microspheres as delivery platforms (hydrogel microspheres as a microcarrier of drugs, bioactive factors, or cells) in the field of skin repair. Finally, the limitations and future prospects of the development of hydrogel microspheres and its application in the field of skin repair were presented. It is hoped that this review can provide a valuable reference for the development of the preparation strategy of hydrogel microspheres and promote the application of hydrogel microspheres in skin repair.

Smart gating porous particles as new carriers for drug delivery

The design of smart drug delivery carriers has recently attracted great attention in the biomedical field. Smart carriers can specifically respond to physical and chemical changes in their environment, such as temperature, photoirradiation, ultrasound, magnetic field, pH, redox species, and biomolecules. This review summarizes recent advances in the integration of porous particles and stimuli-responsive gatekeepers for effective drug delivery. Their unique structural properties play an important role in facilitating the diffusion of drug molecules and cell attachment. Various techniques for fabricating porous materials, with their major advantages and limitations, are summarized. Smart gatekeepers provide advanced functions such as "open-close" switching by functionalized stimuli-responsive polymers on a particle's pores. These controlled delivery systems enable drugs to be targeted at specific rates, time programs, and sites of the human body. The gate structures, gating mechanisms, and controlled release mechanisms of each trigger are detailed. Current ongoing research and future trends in targeted drug delivery, tissue engineering, and regenerative medicine applications are highlighted.

Macroporous materials: microfluidic fabrication, functionalization and applications

This article provides an up-to-date highly comprehensive overview (594 references) on the state of the art of the synthesis and design of macroporous materials using microfluidics and their applications in different fields.

Advances in monoliths and related porous materials for microfluidics

In recent years, the use of monolithic porous polymers has seen significant growth. These materials present a highly useful support for various analytical and biochemical applications. Since their introduction, various approaches have been introduced to produce monoliths in a broad range of materials. Simple preparation has enabled their easy implementation in microchannels, extending the range of applications where microfluidics can be successfully utilized. This review summarizes progress regarding monoliths and related porous materials in the field of microfluidics between 2010 and 2015. Recent developments in monolith preparation, solid-phase extraction, separations, and catalysis are critically discussed. Finally, a brief overview of the use of these porous materials for analysis of subcellular and larger structures is given.

The Construction of an Aqueous Two-Phase System to Solve Weak-Aggregation of Gigaporous Poly(Styrene-Divinyl Benzene) Microspheres

Gigaporous poly(styrene-divinyl benzene) microspheres made via the surfactant reverse micelles swelling method had a controllable pore size of 100⁻500 nm. These microspheres had unique advantages in biomacromolecule separation and enzymes immobilization. However, the obtained microspheres adhered to each other in the preparation process. Though the weak aggregation could be re-dispersed easily by mechanical force, it will be difficult to scale up. By analyzing the formation mechanism of the aggregates, a method was presented to rebuild the interface between the internal aqueous channel and the external continuous phase by constructing an aqueous two-phase system (ATPS). Based on the ATPS, the method of emulsification, stirring speed, and surfactant concentration in oil phase were optimized. Under the optimum condition (screen emulsification method, 120 rpm for polymerization and 55% surfactant), the microspheres with a controllable particle size of 10⁻40 μm and a pore size of about 150 nm were obtained. This new method could significantly decrease the weak-aggregation of microspheres.

Spatially Resolved Monitoring of Drying of Hierarchical Porous Organic Networks

Evaporation kinetics of water confined in hierarchal polymeric porous media is studied by low field nuclear magnetic resonance (NMR). Systems synthesized with various degrees of cross-linker density render networks with similar pore sizes but different response when soaked with water. Polymeric networks with low percentage of cross-linker can undergo swelling, which affects the porosity as well as the drying kinetics. The drying process is monitored macroscopically by single-sided NMR, with spatial resolution of 100 μm, while microscopic information is obtained by measurements of spin-spin relaxation times (T2). Transition from a funicular to a pendular regime, where hydraulic connectivity is lost and the capillary flow cannot compensate for the surface evaporation, can be observed from inspection of the water content in different sample layers. Relaxation measurements indicate that even when the larger pore structures are depleted of water, capillary flow occurs through smaller voids.

Microfluidic Production of Semipermeable Microcapsules by Polymerization-Induced Phase Separation

Semipermeable microcapsules are appealing for controlled release of drugs, study of cell-to-cell communication, and isolation of enzymes or artificial catalysts. Here, we report a microfluidic strategy for creating monodisperse microcapsules with size-selective permeability using polymerization-induced phase separation. Monodisperse water-in-oil-in-water (W/O/W) double-emulsion drops, whose ultrathin middle layer is composed of photocurable resin and inert oil, are generated in a capillary microfluidic device, and irradiated by UV light. Upon UV illumination, the monomers are photopolymerized, which leads to phase separation between the polymerized resin and the oil within the ultrathin shell. Subsequent dissolution of the oil leaves behind regular pores in the polymerized membrane that interconnect the interior and exterior of the microcapsules, thereby providing size-selective permeability. The degree of phase separation can be further tuned by adjusting the fraction of oil in the shell or the affinity of the oil to the monomers, thereby enabling the control of the cutoff value of permeation. High mechanical stability and chemical resistance of the microcapsules, as well as controllable permeability and high encapsulation efficiency, will provide new opportunity in a wide range of applications.

Ex Situ Integration of Multifunctional Porous Polymer Monoliths into Thermoplastic Microfluidic Chips

A unique method for incorporating functional porous polymer monolith elements into thermoplastic microfluidic chips is described. Monolith elements are formed in a microfabricated mold, rather than within the microchannels, and chemically functionalized off chip before insertion into solvent-softened thermoplastic microchannels during chip assembly. Because monoliths may be trimmed prior to final placement, control of their size, shape, and uniformity is greatly improved over in-situ photopolymerization methods. A characteristic trapezoidal profile facilitates rapid insertion and enables complete mechanical anchoring of the monolith periphery, eliminating the need for chemical attachment to the microchannel walls. Off-chip processing allows the parallel preparation of monoliths of differing compositions and surface chemistries in large batches. Multifunctional flow-through arrays of multiple monolith elements are demonstrated using this approach through the creation of a fluorescent immunosensor with integrated controls, and a microfluidic bubble separator comprising a combination of integrated hydrophobic and hydrophilic monolith elements.

Evaporation kinetics in swollen porous polymeric networks

NMR is a fast, nondestructive, and noninvasive technique that can provide information about the pore structure of macroporous polymer beads and the dynamics of liquids confined in them. In this work, we describe the study of the pore structure of the macroporous polymer of ethylene glycol dimethacrylate and 2-hydroxyethyl methacrylate [poly(EGDMA-co-HEMA)] in the dry but also in the swollen state by measuring relaxation times of liquids contained in the polymer network. The results show that the pore architecture differs from the dry to the soaked state. The behavior of polar liquids during evaporation and deswelling dynamics is monitored and described. An internal migration of water from the swollen polymer mesh into expanding pores takes place. With this procedure it is possible to obtain information about the microscopic morphology behavior of the matrix during evaporation and deswelling. This information is of great interest with the aspect of possible and future applications for these types of materials.