A novel design strategy for triple-network structure hydrogels with high-strength, tough and self-healing properties

Masking Strategy Constructed Metal Coordination Hydrogels with Improved Mechanical Properties for Flexible Electronic Sensors

Metal coordination hydrogels (MC-HGs) that introduce dynamically coordinate bonds together with metal ionic conduction have attracted considerable attention in flexible electronics. However, the traditional soaking method alleged to have technical scalability faces the challenge of forming MC-HGs with a "core-shell" structure, which undoubtedly reduces the whole mechanical properties and ionic stimulation responsiveness required for flexible electronics materials. Herein, a novel strategy referred to as "masking" has been proposed based on the theory of the valence bond and coordination chemistry. By regulating the masking agents and their concentrations as well as pairing mode with the metal ions, the whole mechanical properties of the resulting composites (MC-HGsMasking) show nearly double the values of their traditional soaking samples (MC-HGsSoaking). For example, the fracture stress and toughness of Fe-HGsMasking(SA, 5.0 g/L) are 1.55 MPa and 2.14 MJ/m3, almost twice those of Fe-HGsSoaking (0.83 MPa and 0.93 MJ/m3, respectively). Microstructure characterization combined with finite element analysis, molecular dynamics, and first-principles simulations demonstrates that the masking strategy first facilitating interfacial permeation of metal complexes and then effective coordination with functional ligands (carboxylates) of the hydrogels is the mechanism to strengthen the mechanical properties of composites MC-HGsMasking, which has the potential to break through the limitations of current MC-HGs in flexible electronic sensor applications.

Tough, Stretchable, and Thermoresponsive Smart Hydrogels

Self-healing, thermoresponsive hydrogels with a triple network (TN) were obtained by copolymerizing N-isopropyl acryl amide (NiPAAm) with polyvinyl alkohol (PVA) functionalized with methacrylic acid and N,N'-methylene bis(acryl amide) crosslinker in the presence of low amounts (<1 wt.%) of tannic acid (TA). The final gels were obtained by crystalizing the PVA in a freeze-thaw procedure. XRD, DCS, and SEM imaging indicate that the crystallinity is lower and the size of the PVA crystals is smaller at higher TA concentrations. A gel with 0.5 wt.% TA has an elongation at a break of 880% at a tension of 1.39 MPa. It has the best self-healing efficiency of 81% after cutting and losing the chemical network. Step-sweep strain experiments show that the gel has thixotropic properties, which are related to the TA/PVA part of the triple network. The low amount of TA leaves the gel with good thermal responsiveness (equilibrium swelling ratio of 13.3). Swelling-deswelling loop tests show enhanced dimensional robustness of the hydrogel, with a substantial constancy after two cycles.

Copper Ions Absorbed on Acrylic-Acid-Grafted Polystyrene Enable Direct Bonding with Tunable Bonding Strength and Debonding on Demand

Recycling adhesively bonded polymers is inconvenient due to its expensive separation and removal of adhesive residues. To tackle this problem, adhesive technologies are needed allowing debonding on demand and which do not contaminate the surface of the substrate. Direct bonding enabled by oxygen plasma treatment has already achieved substantial adhesion between flat substrates. However, debonding takes place by water, thus limiting the applications of this technology to water-free environments. The work presented in the following shows that this drawback can be overcome by grafting acrylic acid and adding copper(II) ions on the surface of polystyrene. In this process, the number of functional groups on the surface was significantly increased without increasing the surface roughness. The bonding strength between the substrates could be increased, and the process temperature could be lowered. Nevertheless, the samples could be debonded by exposure to EDTA solution under ultrasound. Hence, by combining acrylic acid grafting, variations in the bonding temperatures and the use of copper(II) ions, the bonding strength (5 N to >85 N) and the debonding time under the action of water can be tuned over large ranges (seconds to complete resistance).

Preparation and characterization of multi-network hydrogels based on sodium alginate/krill protein/polyacrylamide-Strength, shape memory, conductivity and biocompatibility

Sodium alginate/krill protein/polyacrylamide (SA/AKP/PAM) hydrogel with "covalent bond-ion complex-hydrogen bond" multi-network structure was prepared by covalent cross-linking and complexion ion crosslinking using SA, AKP, and acrylamide (AM) as raw materials. The effects of ion species (Fe³⁺, Ba²⁺, Sr²⁺, Ca²⁺, and Zn²⁺) on the structure, morphology, and properties of multi-network hydrogels were studied in detail. The results showed that the mechanical strength of ionic cross-linked hydrogels increased significantly. The compressive strength of Fe³⁺ cross-linked hydrogels was 5.56 MPa, 16.13 times that of non-ionic crosslinked hydrogels. The results of ionic conductivity measurements showed that hydrogels had significant ionic conductivity and were sensitive to external forces. Interestingly, the hydrogel can be used as a capacitive pen in mobile phone writing, painting and dialing numbers. Moreover, ionic cross-linked hydrogels had a unique three-dimensional porous structure with gradient distribution, excellent shape memory effect, and good biocompatibility. Fe³⁺, Ba²⁺, Sr²⁺, and Ca²⁺ cross-linked hydrogels were nontoxic and conducive to the adhesion and growth of Schwann cells. These excellent properties of ionic cross-linked SA/AKP/PAM hydrogels have broad applications prospects in flexible electronic devices, sensors, soft electronic skins, and tissue engineering.

Interpenetrated triple network polymers: synergies of three different dynamic bonds

Triply interpenetrated networks were made with a unique dynamic linker in each network. The linkers were hydrogen bonds, boronic esters and Diels–Alder adducts. Triply dynamic materials had superior properties compared to doubly dynamic analogues.

Poly(vinyl alcohol) Hydrogels: The Old and New Functional Materials

Hydrogels have three-dimensional network structures, high water content, good flexibility, biocompatibility, and stimulation response, which have provided a unique role in many fields such as industry, agriculture, and medical treatment. Poly(vinyl alcohol) PVA hydrogel is one of the oldest composite hydrogels. It has been extensively explored due to its chemical stability, nontoxic, good biocompatibility, biological aging resistance, high water-absorbing capacity, and easy processing. PVA-based hydrogels have been widely investigated in drug carriers, articular cartilage, wound dressings, tissue engineering, and other intelligent materials, such as self-healing and shape-memory materials, supercapacitors, sensors, and other fields. In this paper, the discovery, development, preparation, modification methods, and applications of PVA functionalized hydrogels are reviewed, and their potential applications and future research trends are also prospected.

Highly sensitive self-healable strain biosensors based on robust transparent conductive nanocellulose nanocomposites: Relationship between percolated network and sensing mechanism

The conventional skin sensor detection of human physiological signals can be an effective method for disease diagnosis and health monitoring, but the poor biocompatibility, low sensitivity and complex design largely limit their applications. Developing natural nanofiller-reinforced composites as strain biosensors is an appealing solution to reduce environmental impacts and overcome technical bottleneck. Herein, a versatile nature skin-inspired composite film as flexible strain biosensor was developed based on cellulose nanocrystals-polyaniline (CNC-PANI) composites by utilizing their percolated conductive network in polyvinyl alcohol (PVA) matrix. The composite electronic skin showed robust mechanical strength (50.62 MPa) and high sensitivity (Gauge Factor = 11.467) with easy water-induced self-healing abilities. Moreover, we investigated the functioning mechanism of percolated network and the sensory behavior determined by CNC nanocomposite alignment. The percolation threshold of CNC-polyaniline (PANI) was determined at 4.278% and 5% CNC-PANI composite film shows the best overall sensing property. It was also discovered that the sensitivity of this type of conductive-filler electronic skin can be divided into two separate regions at different strain range due to its percolated network. With films prepared by dry casting and dip coating, the alignment of CNC-PANI also contributes to this unique change in electrical property. Generally, our results demonstrated the mechanism and tunability of conductive nanofiller-based composite strain biosensors as a potential alternative to commercial synthetic sensors.

Highly stretchable and self-healing cellulose nanofiber-mediated conductive hydrogel towards strain sensing application

HYPOTHESIS

Hydrogel-based sensors have attracted considerable attention due to potential opportunities in human health monitoring when both mechanical flexibility and sensing ability are required. Therefore, the integration of excellent mechanical properties, electrical conductivity and self-healing properties into hydrogels may improve the application range and durability of hydrogel-based sensors.

EXPERIMENTS

A novel composite hydrogel composed of polyaniline (PANI), polyacrylic acid (PAA) and 2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-oxidized cellulose nanofibrils (TOCNFs) was designed. The viscoelastic, mechanical, conductive, self-healing and sensing properties of hydrogels were studied.

FINDINGS

The TOCNF/PANI/PAA hydrogel exhibits a fracture strain of 982%, tensile strength of 74.98 kPa and electrical conductivity of 3.95 S m^-1, as well as good mechanical and electrical self-healing properties within 6 h at ambient temperature without applying any stimuli. Furthermore, owing to the high sensitivity of the TOCNF/PANI/PAA-0.6 hydrogel-based strain sensor (gauge factor, GF = 8.0), the sensor can accurately and rapidly detect large-scale motion and subtle localized activity. The proposed composite hydrogel is as a promising material for use as soft wearable sensors for health monitoring and smart robotics applications.

Multifunctional Poly(vinyl alcohol) Nanocomposite Organohydrogel for Flexible Strain and Temperature Sensor

Hydrogels are important for stretchable and wearable multifunctional sensors, but their application is limited by their low mechanical strength and poor long-term stability. Herein, a conductive organohydrogel with a 3D honeycomb structure was prepared by integrating carbon nanotubes (CNTs) and carbon black (CB) into a poly(vinyl alcohol)/glycerol (PVA/Gly) organohydrogel. Such a nanocomposite organohydrogel is built on a physical cross-linking network formed by the hydrogen bonds among PVA, glycerol, and water. CNTs and CB had an add-in synergistic impact on the mechanical and electrical performances of the PVA/Gly organohydrogel because of the distinct aspect ratios and geometric shapes. The prepared organohydrogel integrated with a tensile strength of 4.8 MPa, a toughness of 15.93 MJ m^-3, and flexibility with an elongation at break up to 640%. The organohydrogels also showed good antifreezing feature, long-term moisture retention, self-healing, and thermoplasticity. Sensors designed from these organohydrogels displayed high stretching sensitivity to tensile strain and temperature, with a gauge factor of 2.1 within a relatively broad strain range (up to ∼600% strain), a temperature coefficient of resistance of -0.935%·°C^-1, and long-term durability. The sensors could detect full-range human physiological signals and respond to the change in temperature, which are highly desired for multifunctional wearable electronic devices.

A rapid self-healing hydrogel based on PVA and sodium alginate with conductive and cold-resistant properties

Self-healing hydrogels as renewable materials have attracted significant attention recently. However, traditional self-healing hydrogels require a long time for self-healing and cannot be used at low temperatures. Besides, their poor biocompatibility limits the application of hydrogels. Herein, we have prepared a hydrogel composed of polyvinyl alcohol (PVA) and modified sodium alginate. Due to the dynamic recombination of borate bonds, these hydrogels show a strong self-healing ability, with the shortest self-healing time up to 15 seconds. Also, glycerin (GI) was added into the hydrogel to increase the cold resistance of the hydrogel. At -25 °C, the hydrogel still displayed good frost resistance and elasticity. NaCl and other inorganic salts were added to endow the hydrogel with good electrical conductivity. The hydrogel also had good skin-like properties and could activate the capacitive screen of an electronic device.

Chemical unfolding of protein domains induces shape change in programmed protein hydrogels

Programmable behavior combined with tailored stiffness and tunable biomechanical response are key requirements for developing successful materials. However, these properties are still an elusive goal for protein-based biomaterials. Here, we use protein-polymer interactions to manipulate the stiffness of protein-based hydrogels made from bovine serum albumin (BSA) by using polyelectrolytes such as polyethyleneimine (PEI) and poly-L-lysine (PLL) at various concentrations. This approach confers protein-hydrogels with tunable wide-range stiffness, from ~10-64 kPa, without affecting the protein mechanics and nanostructure. We use the 6-fold increase in stiffness induced by PEI to program BSA hydrogels in various shapes. By utilizing the characteristic protein unfolding we can induce reversible shape-memory behavior of these composite materials using chemical denaturing solutions. The approach demonstrated here, based on protein engineering and polymer reinforcing, may enable the development and investigation of smart biomaterials and extend protein hydrogel capabilities beyond their conventional applications.

Reversely Orthogonal Actuation of a Janus-Faced Film Based on Asymmetric Polymer Brush Modification

The actuation phenomena of materials upon external stimulus have attracted much attention for the development of excellent sensors and devices. Herein, we present a smart Janus-faced film that exhibits novel behavior of reverse orthogonal actuation under high humidity and a positive actuation under low humidity, which is achieved by asymmetric polymer brushes on polydimethysiloxane as a substrate through surface-initiated atom transfer radical polymerization. The classical theory of plates and shells and finite element simulations are also applied to understand the orthogonal actuation mechanism of the actuator. This Janus-faced film can reversely grab objects rapidly under high humidity, which provides significant potential to design a more intelligent actuator. In addition, this film is highly sensitive to humidity that even the approaching finger can make it to bend, which is just like the actuation behavior of Mimosa pudica. Based on the above phenomena, we also design the sensing devices to realize the detection of humidity. Interestingly, the film intelligently identifies different solvents (e.g., water and ethanol). This work may demonstrate significant potential in smart surface modifications, flexible robots, bionic sensors, and other fields.

Biodegradable Poly(acrylic acid-co-acrylamide)/Poly(vinyl alcohol) Double Network Hydrogels with Tunable Mechanics and High Self-healing Performance

We proposed a novel strategy in the fabrication of biodegradable poly(acrylic acid-co-acrylamide)/poly(vinyl alcohol) (P(AAc-co-Am)/PVA) double network (DN) hydrogels with good mechanical and self-healing properties. In the DN hydrogel system, P(AAc-co-Am) polymers form a network through the ionic coordinates between -COO- and Fe3+ and hydrogen bonding between -COOH and -CONH2, while another network is fabricated by the complexation between PVA and borax. The influences of the composition on the rheological behaviors and mechanical properties of the synthesized DN hydrogels were investigated. The rheological measurements revealed that the viscoelasticity and stiffness of the P(AAc-co-Am)/PVA DN hydrogels increase as the acrylamide and Fe3+ concentrations increase. At 0.05 mmol of Fe3+ and 50% of acrylamide, tensile strength and elongation at break of P(AAc-co-Am)/PVA DN hydrogels could reach 329.5 KPa and 12.9 mm/mm, respectively. These properties arise from the dynamic reversible bonds existed in the P(AAc-co-Am)/PVA DN hydrogels. These reversible bonds also give good self-healing properties, and the maximum self-healing efficiency of P(AAc-co-Am)/PVA DN hydrogels is up to 96.4%. The degradation test of synthesized DN hydrogels was also conducted under simulated physiological conditions and the weight loss could reach 74% in the simulated intestinal fluid. According to the results presented here, the synthesized P(AAc-co-Am)/PVA DN hydrogels have a potential application prospect in various biomedical fields.

Facile Fabrication of Self-Healable and Antibacterial Soy Protein-Based Films with High Mechanical Strength

Soy protein isolate (SPI), a ubiquitous and readily available biopolymer, has drawn increasing attention because of its sustainability, abundance, and low price. However, the poor mechanical properties, tedious performance adjustments, irreversible damage, and weak microorganism resistance have limited its applications. In this study, a facile but delicate strategy is proposed to fabricate an excellently self-healable and remarkably antibacterial SPI-based material with high mechanical strength by integrating polyethyleneimine (PEI) and metal ions (Cu(II) or Zn(II)). The tensile strengths of the SPI/PEI-Cu-0.750 and SPI/PEI-Zn-0.750 films reach up to 10.46 ± 0.50 and 9.06 ± 0.62 MPa, which is 367.06 and 306.28% strength increase compared to that of neat SPI film, respectively. Due to abundant non-covalent bonds and low glass transition temperature of the network, both SPI/PEI-Cu and SPI/PEI-Zn films exhibit a satisfactory self-healing behavior even at room temperature. Furthermore, SPI/PEI-Cu and SPI/PEI-Zn films demonstrate high bacterial resistance against Escherichia coli and Staphylococcus aureus. This facile strategy of establishing dynamic networks in a biomaterial with numerous excellent properties will enormously expand the scope of its applications, especially in the field of recyclable and durable materials.

A Dual Cross-Linked Strategy to Construct Moldable Hydrogels with High Stretchability, Good Self-Recovery, and Self-Healing Capability

Most conventional synthetic hydrogels suffer from poor mechanical properties; despite recent significant progress in fabricating tough hydrogels, it is still a challenge to simultaneously realize high stretchability, self-recovery, and self-healing capability in a hydrogel. In this work, a new type of starch/PVA/borax hybrid dual cross-linked (DC) hydrogel was synthesized by a one-pot method. The as-prepared DC hydrogels exhibited mechanical properties of remarkable extensibility (ca. 2485%), excellent toughness (ca. 290.5 kJ m^-3), high compression strength (ca. 547.8 kPa), rapid recoverability (81.9% energy recovery after 30 min), and free-shapeable behavior. More impressively, the DC gels sustained approximately 300 times their own weight and exhibited an outstanding self-healing capability at room temperature both in air and underwater. Furthermore, the adsorption amount of methylene blue onto the anionic DC gel (144.68 mg/g) was much higher than that of corn starch gel. Consequently, the eco-friendly, stable, and biodegradable hydrogels will have a great potential application in removing anionic dyes from the wastewater produced by agriculture and industry.