PLA electrospun nanofibers modified with polypyrrole-grafted gelatin as bioactive electroconductive scaffold

Controlled dual drug delivery system based on gelatin electrospinning membranes for wound healing promotion

Skin wound repair is a complex dynamic process. Current dual-drug delivery systems struggle to adapt to the process of wound healing. Therefore, the construction of a dual-drug delivery system with intelligent responsiveness, controllable release, and understanding the repair mechanisms, is a current research challenge. This study described the design of a new gelatin-based dual-drug delivery system (PGDMD) using electric field stimulation to achieve a controlled drug release. In vitro drug release experiments demonstrated PGDMD completed the transition from a fiber membrane state to a gel state during the release process. Quercetin released with a rapid release within the first 60 min and amikacin released over 24 h. The amount of drug released in the same release time was increased mainly through electrostatic action under the effect of the electric field and accelerated the movement of drug molecules. The non-targeted metabolomics analysis revealed that PGDMD mainly reduced inflammation and oxidative stress responses by upregulating the expression of antioxidant-related metabolites, thereby improving the therapeutic effect of rat traumatic skin. In conclusion, the dual-drug delivery system might be potentially applied to high-performance medical devices, pharmaceuticals and other industry products, and provides research ideas and reference for exploring the interaction between biomaterials and the organism.

Comparative study of iodine-doped and undoped pyrrole grafting with plasma on poly (glycerol sebacate) scaffolds and its human dental pulp stem cells compatibility

This study addresses the morphological and chemical characterization of PGS scaffolds after (6, 12, 18, 24, and 30 min) residence in undoped pyrrole plasma (PGS-PPy) and the evaluation of cell viability with human dental pulp stem cells (hDPSCs). The results were compared with a previous study that used iodine-doped pyrrole (PGS-PPy/I). Analyses through SEM and AFM revealed alterations in the topography and quantity of deposited PPy particles. FTIR spectra of PGS-PPy scaffolds confirmed the presence of characteristic absorption peaks of PPy, with higher intensities observed in the nitrile and -C≡C- groups compared to PGS-PPy/I scaffolds, while raman spectra indicated a lower presence of polaron N+ groups. On the other hand, PGS scaffolds modified with PPy exhibited lower cytotoxicity compared to PGS-PPy/I scaffolds, as evidenced by the Live/Dead assay. Furthermore, the PGS-PPy scaffolds at 6 and 12 min, and particularly the PGS-PPy/I scaffold at 6 min, showed the best results in terms of cell viability by the fifth day of culture. The findings of this study suggest that undoped pyrrole plasma modification for short durations could also be a viable option to enhance the interaction with hDPSCs, especially when the treatment times range between 6 min and 12 min.

Biomechanical Scaffolds of Decellularized Heart Valves Modified by Electrospun Polylactic Acid

Enhancing the mechanical properties and cytocompatibility of decellularized heart valves is the key to promote the application of biological heart valves. In order to further improve the mechanical properties, the electrospinning and non-woven processing methods are combined to prepare the polylactic acid (PLA)/decellularized heart valve nanofiber-reinforced sandwich structure electrospun scaffold. The effect of electrospinning time on the performance of decellularized heart valve is investigated from the aspects of morphology, mechanical properties, softness, and biocompatibility of decellularized heart valve. Results of the mechanical tests show that compared with the pure decellularized heart valve, the mechanical properties of the composite heart valve were significantly improved with the tensile strength increasing by 108% and tensile strain increased by 571% when the electrospinning time exceeded 2 h. In addition, with this electrospinning time, the composite heart valve has a certain promoting effect on the human umbilical vein endothelial cells proliferation behavior. This work provides a promising foundation for tissue heart valve reendothelialization to lay the groundwork for organoid.

Molecular and cellular signalling pathways for promoting neural tissue growth - A tissue engineering approach

Neural tissue engineering is a sub-field of tissue engineering that develops neural tissue. Damaged central and peripheral nervous tissue can be fabricated with a suitable scaffold printed with biomaterials. These scaffolds promote cell growth, development, and migration, yet they vary according to the biomaterial and scaffold printing technique, which determine the physical and biochemical properties. The physical and biochemical properties of scaffolds stimulate diverse signalling pathways, such as Wnt, NOTCH, Hedgehog, and ion channels- mediated pathways to promote neuron migration, elongation and migration. However, neurotransmitters like dopamine, acetylcholine, gamma amino butyric acid, and other signalling molecules are critical in neural tissue engineering to tissue fabrication. Thus, this review focuses on neural tissue regeneration with a tissue engineering approach highlighting the signalling pathways. Further, it explores the interaction of the scaffolds with the signalling pathways for generating neural tissue.

Raspberry-like PLA/PGS biodegradable microparticles with urethane linkages: Unlocking tailored release of magnesium ions and oxygen for bone tissue engineering

Designing biodegradable microparticles with finely controlled release properties for tissue engineering systems remains a significant scientific challenge. This study introduces a novel approach by fabricating urethane-linked PLA/PGS microparticles loaded with magnesium peroxide. The microparticles offer potential applications in bone tissue engineering due to their ability to provide a controlled release of oxygen and magnesium ions while maintaining physiological pH. The PGS pre-polymer was synthesized via polycondensation and characterized using FTIR, 1H NMR, and GPC. Microparticle morphology transformed from smooth to raspberry-like upon incorporation of PGS, as observed by SEM. Microparticle size was tuned by varying PGS and PLA concentrations. FTIR analysis confirmed the successful formation of urethane links within the microparticles. MgO2-loaded PLA/PGS microparticles exhibited sustained release of dissolved oxygen and magnesium ions for 21 days while maintaining physiological pH better than PLA microparticles. Cell viability assays confirmed microparticle cytocompatibility, and ALP and Alizarin red assays demonstrated their ability to induce osteogenic differentiation. These findings highlight the potential of pH-controlled MgO2-loaded microparticles as an effective system for bone tissue engineering. In conclusion, this study presents a novel approach to designing biodegradable microparticles with adjustable release properties for bone tissue engineering. The urethane-based MgO2-loaded microparticles provide controlled release of oxygen and magnesium ions and regulate the environment's pH, making them a promising system for bone tissue engineering applications.

High-efficient serum-free differentiation of trabecular meshwork mesenchymal stem cells into Schwann-like cells on polylactide electrospun nanofibrous scaffolds

Cell-based therapies of the peripheral nerve injury (PNI) have provided satisfactory outcomes among which Schwann cells (SCs) are the most reliable candidate to improve repair of the damaged nerve, however, it is difficult to obtain sufficient amount of SCs for clinical applications. Trabecular meshwork-derived mesenchymal stem cells (TM-MSCs) are newly introduced neural crest originated MSCs, which may have a desirable potential for Schwann-like differentiation due to their common lineage. On the other hand, one of the challenges of cell-based therapies is usage of serum containing media which is inappropriate for clinical applications. In the present study, we investigated the differentiation potential of TM-MSCs into Schwann-like cells on polylactide (PLA) nanofibrous scaffolds in the presence or absence of serum. Our results revealed that PLA nanofibers had no negative effects on the cell growth and proliferation of TM-MSCs, and improved Schwann-like differentiation compared with tissue culture plates (TCPs). More importantly, when the cells cultured on the scaffold in the presence of serum-free media (SFM), expression mRNA levels of SC markers (S100B, GAP43, GFAP and SOX10) were significantly increased compared with those of serum-rich groups. Immunostaining of TM-MSCs cultured on serum-free PLA nanofibrous scaffolds also showed significant expression of GAP43, GFAP and SOX10 compared to those of control, indicating the efficient role of SFM in the differentiation of TM-MSCs into SCs lineage. Overall, the findings of this study revealed the differentiation potential of TM-MSCs to SC fate for the first time, and also showed the beneficial effects of SFM and PLA nanofibrous scaffolds as a promising approach for peripheral nerve regeneration.

Design and Fabrication of Electrospun PLA-Based Silica-Modified Composite Nanofibers with Antibacterial Properties for Perspective Wound Treatment

The aim of this study was to develop a novel amikacin (AMI) delivery system with prolonged release based on composite electrospun nanofibers of PLA supplemented with AMI-loaded Si nanoparticles of different morphology. The resultant materials were characterized in terms of their physical properties (scanning electron microscopy, Brunauer-Emmett-Teller analysis, thermogravimetric analysis, water contact angle). High-Performance Liquid Chromatography was used to determine the AMI content in the liquid fractions obtained from the release study. The results show that nanofibers of fumed silica exhibited an aggregated, highly porous structure, whereas nanofibers of mesoporous silica had a spherical morphology. Both silica nanoparticles had a significant effect on the hydrophilic properties of PLA nanofiber surfaces. The liquid fractions were investigated to gauge the encapsulation efficiency (EE) and loading efficiency (LE) of AMI, demonstrating 66% EE and 52% LE for nanofibers of fumed silica compared to nanofibers of mesoporous silica nanoparticles (52% EE and 12.7% LE). The antibacterial activity of the AMI-loaded nanofibers was determined by the Kirby-Bauer Method. These results demonstrated that the PLA-based silica nanofibers effectively enhanced the antibacterial properties against the Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae.

Production of Graft Copolymers of Cod Collagen with Butyl Acrylate and Vinyl Butyl Ether in the Presence of Triethylborane-Prospects for Use in Regenerative Medicine

Collagen is a suitable material for regenerative medicine because it is characterized by its good biocompatibility. However, due to its fibrillar structure, it cannot organize itself into three-dimensional porous structures without additional modification. The introduction of synthetic monomer elements into the collagen macromolecules is a technique used to form three-dimensional, collagen-based, branched, and crosslinked structures. New types of graft copolymers made from cod collagen with a butyl acrylate and vinyl butyl ether copolymer in aqueous dispersion were obtained in the presence of triethylborane by a radical mechanism. The process of graft copolymer formation proceeded as usual by radical initiation, through radicals formed during triethylborane oxidation by oxygen residues, collagen borination, and reversible inhibition with the participation of a boroxyl radical. The characteristics of the graft copolymers were determined using methods of physical and chemical analysis (GPC, SEM, IR spectroscopy, etc.), while the cytotoxicity was assessed using the MTT assay method. It is shown that the grafting of alternating blocks of butyl acrylate and vinyl butyl ether to the protein macromolecules results in changes in the morphological pattern of the graft co-polymer in comparison with native collagen. This is manifested in the development of consolidations around the collagen fibers of the structural matrices, with the co-polymer cellular structure consisting of interpenetrating pores of unequal size. Additionally, it is important that the graft co-polymer solutions are not toxic at a certain concentration. The above properties confirm the promising nature of the technique's application as the basis for producing new materials for regenerative medicine.

Recent advance in bioactive hydrogels for repairing spinal cord injury: material design, biofunctional regulation, and applications

Functional hydrogels show potential application in repairing spinal cord injury (SCI) due to their unique chemical, physical, and biological properties and functions. In this comprehensive review, we present recent advance in the material design, functional regulation, and SCI repair applications of bioactive hydrogels. Different from previously released reviews on hydrogels and three-dimensional scaffolds for the SCI repair, this work focuses on the strategies for material design and biologically functional regulation of hydrogels, specifically aiming to show how these significant efforts can promoting the repairing performance of SCI. We demonstrate various methods and techniques for the fabrication of bioactive hydrogels with the biological components such as DNA, proteins, peptides, biomass polysaccharides, and biopolymers to obtain unique biological properties of hydrogels, including the cell biocompatibility, self-healing, anti-bacterial activity, injectability, bio-adhesion, bio-degradation, and other multi-functions for repairing SCI. The functional regulation of bioactive hydrogels with drugs/growth factors, polymers, nanoparticles, one-dimensional materials, and two-dimensional materials for highly effective treating SCI are introduced and discussed in detail. This work shows new viewpoints and ideas on the design and synthesis of bioactive hydrogels with the state-of-the-art knowledges of materials science and nanotechnology, and will bridge the connection of materials science and biomedicine, and further inspire clinical potential of bioactive hydrogels in biomedical fields.

The role of Gel-Ppy-modified nerve conduit on the repair of sciatic nerve defect in rat model

The serious clinical challenge of peripheral nerve injury (PNI) is nerve regeneration. Nerve conduit represents a promising strategy to contribute to nerve regeneration by bridging injured nerve gaps. However, due to a unique microenvironment of nerve tissue, autologous nerves have not been substituted by nerve conduit. Nerve regeneration after nerve conduit implantation depends on many factors, such as conductivity and biocompatibility. Therefore, Gelatin (Gel) with biocompatibility and polypyrrole (Ppy) with conductivity is highly concerned. In this paper, Gel-Ppy modified nerve conduit was fabricated with great biocompatibility and conductivity to evaluate its properties of enhancing nerve regeneration in vivo and in vitro. The proliferation of Schwann cells on Gel-Ppy modified nerve conduit was remarkably increased. Consistent with in vitro results, the Gel-Ppy nerve conduit could contribute to the regeneration of Schwann cell in vivo. The axon diameters and myelin sheath thickness were also enhanced, resulting in the amelioration of muscle atrophy, nerve conduction, and motor function recovery. To explain this interesting phenomenon, western blot results indicated that the Gel-Ppy conduit facilitated nerve regeneration via upregulating the Rap1 pathway to induce neurite outgrowth. Therefore, the above results demonstrated that Gel-Ppy modified nerve conduit could provide an acceptable microenvironment for nerve regeneration and be popularized as a novel therapeutic strategy of PNI.

Conductive Polymer-Coated 3D Printed Microneedles: Biocompatible Platforms for Minimally Invasive Biosensing Interfaces

Conductive polymeric microneedle (MN) arrays as biointerface materials show promise for the minimally invasive monitoring of analytes in biodevices and wearables. There is increasing interest in microneedles as electrodes for biosensing, but efforts have been limited to metallic substrates, which lack biological stability and are associated with high manufacturing costs and laborious fabrication methods, which create translational barriers. In this work, additive manufacturing, which provides the user with design flexibility and upscale manufacturing, is employed to fabricate acrylic-based microneedle devices. These microneedle devices are used as platforms to produce intrinsically-conductive, polymer-based surfaces based on polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS). These entirely polymer-based solid microneedle arrays act as dry conductive electrodes while omitting the requirement of a metallic seed layer. Two distinct coating methods of 3D-printed solid microneedles, in situ polymerization and drop casting, enable conductive functionality. The microneedle arrays penetrate ex vivo porcine skin grafts without compromising conductivity or microneedle morphology and demonstrate coating durability over multiple penetration cycles. The non-cytotoxic nature of the conductive microneedles is evaluated using human fibroblast cells. The proposed fabrication strategy offers a compelling approach to manufacturing polymer-based conductive microneedle surfaces that can be further exploited as platforms for biosensing.

Enhanced neural differentiation by applying electrical stimulation utilizing conductive and antioxidant alginate-polypyrrole/poly-l-lysine hydrogels

The challenge of restoration from neurodegenerative disorder requires effective solutions. To enhance the healing efficiencies, scaffolds with antioxidant activities, electroconductivity, and versatile features to encourage neuronal differentiation are potentially useful. Herein, polypyrrole-alginate (Alg-PPy) copolymer was used to design antioxidant and electroconductive hydrogels through the chemical oxidation radical polymerization method. The hydrogels have antioxidant effects to combat oxidative stress in nerve damage thanks to the introduction of PPy. Additionally, poly-l-lysine (PLL) provided these hydrogels with a great differentiation ability of stem cells. The morphology, porosity, swelling ratio, antioxidant activity, rheological behavior, and conductive characteristics of these hydrogels were precisely adjusted by altering the amount of PPy. Characterization of hydrogels showed appropriate electrical conductivity and antioxidant activity for neural tissue applications. Cytocompatibility, live/dead assays, and Annexin V/PI staining by flow cytometry using P19 cells confirmed the excellent cytocompatibility and cell protective effect under ROS microenvironment of these hydrogels in both normal and oxidative conditions. The neural marker investigation in the induction of electrical impulses was assessed through RT-PCR and immunofluorescence assay, demonstrating the differentiation of P19 cells to neurons cultured in these scaffolds. In summary, the antioxidant and electroconductive Alg-PPy/PLL hydrogels demonstrated excellent potential as promising scaffolds for treating neurodegenerative disorders.

Polyurethane/Liquid Crystal Microfibers with pDNA Polyplex Loadings for the Optimal Release and Promotion of HUVEC Proliferation

Fiber structures with connected pores resemble the natural extracellular matrix (ECM) in tissues, and show high potential for promoting the formation of natural functional tissue. The geometry of composite fibers produced by electrospinning is similar to that of the living-tissue ECM, in terms of structural complexity. The introduction of liquid crystals does not affect the morphology of fibers. The composite mat shows better hydrophilicity, with higher content of liquid crystal. At the same time, the higher the content of liquid crystal, the lower the modulus and tensile strength, and the higher the breaking energy and the elongation at break. Additionally, the factors affecting fibers are also investigated in this study. The addition of liquid crystals to the fibers' matrix can slow down the release of pDNA, which is the most common vehicle for genetic engineering, and the encapsulation of pDNA polymer into the fiber matrix can maintain biological activity. The continued release of the pDNA complex was achieved in this study through liquid crystals, and the effective release is controllable. In addition, the integration of liquid crystals into fibers with pDNA polymers can cause a faster transfection rate and promote HUVEC (Human Umbilical Vein Endothelial Cells) growth. It is possible to combine electrospun fibers containing LC (liquid crystal) with pDNA condensation technology to achieve the goal of a sustained release. The production of inductable tissue-building equipment can manipulate the required signals at an effective level in the local tissue microenvironment.

A Shock to the (Nervous) System: Bioelectricity Within Peripheral Nerve Tissue Engineering

The peripheral nervous system has the remarkable ability to regenerate in response to injury. However, this is only successful over shorter nerve gaps and often provides poor outcomes for patients. Currently, the gold standard of treatment is the surgical intervention of an autograft, whereby patient tissue is harvested and transplanted to bridge the nerve gap. Despite being the gold standard, more than half of patients have dissatisfactory functional recovery after an autograft. Peripheral nerve tissue engineering aims to create biomaterials that can therapeutically surpass the autograft. Current tissue-engineered constructs are designed to deliver a combination of therapeutic benefits to the regenerating nerve, such as supportive cells, alignment, extracellular matrix, soluble factors, immunosuppressants, and other therapies. An emerging therapeutic opportunity in nerve tissue engineering is the use of electrical stimulation (ES) to modify and enhance cell function. ES has been shown to positively affect four key cell types, such as neurons, endothelial cells, macrophages, and Schwann cells, involved in peripheral nerve repair. Changes elicited include faster neurite extension, cellular alignment, and changes in cell phenotype associated with improved regeneration and functional recovery. This review considers the relevant modes of administration and cellular responses that could underpin incorporation of ES into nerve tissue engineering strategies. Impact Statement Tissue engineering is becoming increasingly complex, with multiple therapeutic modalities often included within the final tissue-engineered construct. Electrical stimulation (ES) is emerging as a viable therapeutic intervention to be included within peripheral nerve tissue engineering strategies; however, to date, there have been no review articles that collate the information regarding the effects of ES on key cell within peripheral nerve injury. This review article aims to inform the field on the different therapeutic effects that may be achieved by using ES and how they may become incorporated into existing strategies.

Electrospun Nanofiber Composites for Drug Delivery: A Review on Current Progresses

A medication's approximate release profile should be sustained in order to generate the desired therapeutic effect. The drug's release site, duration, and rate must all be adjusted to the drug's therapeutic aim. However, when designing drug delivery systems, this may be a considerable hurdle. Electrospinning is a promising method of creating a nanofibrous membrane since it enables drugs to be placed in the nanofiber composite and released over time. Nanofiber composites designed through electrospinning for drug release purposes are commonly constructed of simple structures. This nanofiber composite produces matrices with nanoscale fiber structure, large surface area to volume ratio, and a high porosity with small pore size. The nanofiber composite's large surface area to volume ratio can aid with cell binding and multiplication, drug loading, and mass transfer processes. The nanofiber composite acts as a container for drugs that can be customized to a wide range of drug release kinetics. Drugs may be electrospun after being dissolved or dispersed in the polymer solution, or they can be physically or chemically bound to the nanofiber surface. The composition and internal structure of the nanofibers are crucial for medicine release patterns.

Plasma Oscillation Behavior and Electromagnetic Interference Shielding of Carbon Nanofibers/ Conductive Polymer Metacomposites at Radarwave Frequency

Metacomposites have attracted widespread attention due to their unique negative electromagnetic properties and stupendous applications. Although there are systems that realize metamaterial properties in low radio frequency bands, the research on the construction of polymer matrix metacomposites with negative performance in the pivotal GHz band is still uncovered. Herein, the carbon nanofiber/conductive polymer metacomposites with three-dimensional overlapping network structures are innovatively constructed to achieve negative permittivity characteristics in the radarwave frequency range, and convenient methods for further adjusting the electromagnetic parameters is also proposed. The results show that the negative permittivity of CNFs/PANI metacomposites can be conveniently altered via adjusting PANI content. Furthermore, electromagnetic shielding has also been fully discussed as one of the most valuable applications of the metacomposites. The SE_T of CNFs/PANI-70 has an average value of 70 dB at 4-18 GHz and can reach a maximum of 80 dB at 4 GHz, which far exceeds the current commercial electromagnetic shielding standards. This work greatly broadens the promising application of metacomposites for perfect electromagnetic shielding, novel capacitance, and frequency selective surfaces. This article is protected by copyright. All rights reserved.

Ionic conductive nanocomposite based on poly(l-lactic acid)/poly(amidoamine) dendrimerelectrospun nanofibrous for biomedical application

The modification of poly (l-lactic acid) (PLLA) electrospun nanofibrous scaffolds was carried out by blending with second-generation poly amidoamine (PAMAM) for enhancement of their ionic conductivity. The samples containing PLLA and various amounts of PAMAM (1%, 3%, 5%, and 7% by wt.) were fabricated by electrospinning techniques. The electrospun fibers were characterized using scanning electron microscopy (SEM), porosity, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry, contact angle measurement, water uptake measurement, mechanical properties, and electrical properties. Furthermore,in vitrodegradation study and cell viability assay were investigated in biomaterial applications. Creating amide groups through aminolysis reaction was confirmed by FTIR analysis successfully. The results reveal that adding PAMAM caused an increase in fiber diameter, crystallinity percentage, hydrophilicity, water absorption, elongation-at-break, and OE-mesenchymal stem cell viability. It is worth mentioning that this is the first report investigating the conductivity of PLLA/PAMAM nanofiber. The results revealed that by increasing the amount of PAMAM, the ionic conductivity of scaffolds was enhanced by about nine times. Moreover, the outcomes indicated that the presence of PAMAM could improve the limitations of PLLA like hydrophobicity, lack of active group, and poor cell adhesion.

Pyrrole Plasma Polymer-Coated Electrospun Scaffolds for Neural Tissue Engineering

Promising strategies for neural tissue engineering are based on the use of three-dimensional substrates for cell anchorage and tissue development. In this work, fibrillar scaffolds composed of electrospun randomly- and aligned-oriented fibers coated with plasma synthesized pyrrole polymer, doped and undoped with iodine, were fabricated and characterized. Infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction analysis revealed the functional groups and molecular integration of each scaffold, as well as the effect of plasma polymer synthesis on crystallinity. Scanning microscopy imaging demonstrated the porous fibrillar micrometric structure of the scaffolds, which afforded adhesion, infiltration, and survival for the neural cells. Orientation analysis of electron microscope images confirmed the elongation of neurite-like cell structures elicited by undoped plasma pyrrole polymer-coated aligned scaffolds, without any biochemical stimuli. The MTT colorimetric assay validated the biocompatibility of the fabricated composite materials, and further evidenced plasma pyrrole polymer-coated aligned scaffolds as permissive substrates for the support of neural cells. These results suggest plasma synthesized pyrrole polymer-coated aligned scaffolds are promising materials for tissue engineering applications.