Effects of glycerol on the production of poly(γ-glutamic acid) by Bacillus licheniformis

High-level production of poly-γ-glutamic acid by a newly isolated Bacillus sp. YJY-8 and potential use in increasing the production of tomato

Strain YJY-8, a new γ-polyglutamic acid producer, was separated from fermented soybean paste samples. The strain was identified as a genus of Bacillus by morphological and 16S rDNA sequence analysis and was named Bacillus sp. YJY-8. The optimal medium composition and cultural conditions were studied using a single-factor experiment and a response surface experiment. The optimized medium consisted of monosodium glutamate 70 g/L, glucose 54.3 g/L, glycerol 31.8 g/L, ammonium sulfate 11.1 g/L, yeast extract 3.2 g/L, tryptone 1.5 g/L, L-glutamic acid 6.8 g/L, MgSO4 7H2O 0.5 g/L, FeCl3 6H2O 0.02 g/L, KH2PO4 0.9 g/L, CaCl2 0.03 g/L, MnSO4 H2O 0.3 g/L, ammonium molybdate 0.02 g/L, pH 7.0. The optimal cultivation conditions were 35 °C and pH 7.0. Under the optimized conditions, after 48 hr of cultivation, the highest shaking flask fermentation level of γ-PGA reached 65.2 ± 0.36 g/L. In addition, through fed-batch fermentation in 30 L fermenters, the fermentation level of γ-PGA reached its highest level at 88.42 g/L and productivity was 1.23 g/(L hr) after 72 hr. Then, the effect of γ-PGA on tomato yield was investigated. At the seedling stage, the plant height and stem diameter of γ-PGA treated plants increased by 5.69 and 15.735% after spraying γ-PGA for 19 days. During the flowering and fruiting period, the stem diameter of the γ-PGA treatment group increased by 6.74%, with a maximum increase of 11.65%. The number of fruit branches increased by 0.56-16.29% and the number of fruit sets increased by 1.01-28.47%. At the fruit maturation stage, the yield of tomatoes increased by 10.51, 14.27, and 5.83%.

Production of ultra-high-molecular-weight poly-γ-glutamic acid by a newly isolated Bacillus subtilis strain and genomic and transcriptomic analyses

Poly-γ-glutamic acid (γ-PGA) is a microbial-derived polymer with molecular weight (Mw) from 104 to 107 Da, and the high-Mw (> 7.0 × 105 Da) or ultra-high-Mw (> 5.0 × 106 Da) γ-PGA has important application value as a tissue engineering material, as a flocculant, and as a heavy metal remover. Therefore, how to produce these high-Mw γ-PGAs with low cost and high efficiency has attracted wide attention. In this study, a γ-PGA producer was isolated from the natural environment, and identified and named Bacillus subtilis GXD-20. Then, the ultra-high-Mw (> 6.0 × 106 Da) γ-PGA produced by GXD-20 was characterized. Interestingly, GXD-20 could produce γ-PGA at 42°C, and exhibited a γ-PGA titer of up to 22.29 ± 0.59 g L-1 in a 5-L fermenter after optimization of the fermentation process. Comparative genomic analysis indicated that the specific protein sequence and subcellular localization of PgdS (a γ-PGA-degrading enzyme) were closely related to the ultra-high-Mw of γ-PGA. Transcriptomic analysis revealed that the high γ-PGA titer at 42°C was mainly related to the high expression of genes encoding enzymes for sucrose transportation and utilization, nitrogen transportation, endogenous glutamate synthesis, and γ-PGA synthesis. These results provide new insights into the production of ultra-high-Mw γ-PGA by Bacillus at high temperatures.

Poly (γ) glutamic acid: a unique microbial biopolymer with diverse commercial applicability

Microbial biopolymers have emerged as promising solutions for environmental pollution-related human health issues. Poly-γ-glutamic acid (γ-PGA), a natural anionic polymeric compound, is composed of highly viscous homo-polyamide of D and L-glutamic acid units. The extracellular water solubility of PGA biopolymer facilitates its complete biodegradation and makes it safe for humans. The unique properties have enabled its applications in healthcare, pharmaceuticals, water treatment, foods, and other domains. It is applied as a thickener, taste-masking agent, stabilizer, texture modifier, moisturizer, bitterness-reducing agent, probiotics cryoprotectant, and protein crystallization agent in food industries. γ-PGA is employed as a biological adhesive, drug carrier, and non-viral vector for safe gene delivery in tissue engineering, pharmaceuticals, and medicine. It is also used as a moisturizer to improve the quality of hair care and skincare cosmetic products. In agriculture, it serves as an ideal stabilizer, environment-friendly fertilizer synergist, plant-growth promoter, metal biosorbent in soil washing, and animal feed additive to reduce body fat and enhance egg-shell strength.

Poly-gamma-glutamic acid biopolymer: a sleeping giant with diverse applications and unique opportunities for commercialization

Poly-gamma-glutamic acid (γ-PGA) is a biodegradable, non-toxic, ecofriendly, and non-immunogenic biopolymer. Its phenomenal properties have gained immense attention in the field of regenerative medicine, the food industry, wastewater treatment, and even in 3D printing bio-ink. The γ-PGA has the potential to replace synthetic non-degradable counterparts, but the main obstacle is the high production cost and lower productivity. Extensive research has been carried out to reduce the production cost by using different waste; however, it is unable to match the commercialization needs. This review focuses on the biosynthetic mechanism of γ-PGA, its production using the synthetic medium as well as different wastes by L-glutamic acid-dependent and independent microbial strains. Furthermore, various metabolic engineering strategies and the recovery processes for γ-PGA and their possible applications are discussed. Finally, highlights on the challenges and unique approaches to reduce the production cost and to increase the productivity for commercialization of γ-PGA are also summarized.

Efficient molasses utilization for low-molecular-weight poly-γ-glutamic acid production using a novel Bacillus subtilis stain

Background

Poly-γ-glutamic acid (γ-PGA) is a biopolymer and has various applications based on its biocompatibility, non-toxicity, and edibility. Low-molecular-weight (Mw)-γ-PGA has promising applications in agriculture and pharmaceuticals. It is traditionally produced by enzymatic hydrolysis. Cost-effective bioproduction of low-Mw-γ-PGA is essential for commercial application of γ-PGA.

Results

Bacillus subtilis 242 is a newly isolated low-Mw-γ-PGA-producing strain. To develop cost-effective production of γ-PGA using this newly isolated strain, cane molasses and corn steep liquor were used to produce γ-PGA. The concentration of cane molasses was optimized and 100 g/L cane molasses resulted in high γ-PGA production. The effects of yeast extract and corn steep liquor on γ-PGA yield were investigated. High concentration of γ-PGA was obtained in the medium with corn steep liquor. A concentration of 32.14 g/L γ-PGA was achieved in fed-batch fermentation, with a productivity of 0.67 g/L/h and a percentage yield (g_γ-PGA/g_glutamate) of 106.39%. The Mw of γ-PGA was 27.99 kDa.

Conclusion

This study demonstrated the potential application of B. subtilis 242 for cost-effective production of low-Mw-γ-PGA from cane molasses.

Recent Advances in Microbial Synthesis of Poly-γ-Glutamic Acid: A Review

Poly-γ-glutamic acid (γ-PGA) is a natural, safe, non-immunogenic, biodegradable, and environmentally friendly glutamic biopolymer. γ-PGA has been regarded as a promising bio-based materials in the food field, medical field, even in environmental engineering field, and other industrial fields. Microbial synthesis is an economical and effective way to synthesize γ-PGA. Bacillus species are the most widely studied producing strains. γ-PGA biosynthesis involves metabolic pathway of racemization, polymerization, transfer, and catabolism. Although microbial synthesis of γ-PGA has already been used extensively, productivity and yield remain the major constraints for its industrial application. Metabolic regulation is an attempt to solve the above bottleneck problems and meet the demands of commercialization. Therefore, it is important to understand critical factors that influence γ-PGA microbial synthesis in depth. This review focuses on production strains, biosynthetic pathway, and metabolic regulation. Moreover, it systematically summarizes the functional properties, purification procedure, and industrial application of γ-PGA.

Production of Rainbow Colorants by Metabolically Engineered Escherichia coli

There has been much interest in producing natural colorants to replace synthetic colorants of health concerns. Escherichia coli has been employed to produce natural colorants including carotenoids, indigo, anthocyanins, and violacein. However, production of natural green and navy colorants has not been reported. Many natural products are hydrophobic, which are accumulated inside or on the cell membrane. This causes cell growth limitation and consequently reduces production of target chemicals. Here, integrated membrane engineering strategies are reported for the enhanced production of rainbow colorants-three carotenoids and four violacein derivatives-as representative hydrophobic natural products in E. coli. By integration of systems metabolic engineering, cell morphology engineering, inner- and outer-membrane vesicle formation, and fermentation optimization, production of rainbow colorants are significantly enhanced to 322 mg L-1 of astaxanthin (red), 343 mg L-1 of β-carotene (orange), 218 mg L-1 of zeaxanthin (yellow), 1.42 g L-1 of proviolacein (green), 0.844 g L-1 of prodeoxyviolacein (blue), 6.19 g L-1 of violacein (navy), and 11.26 g L-1 of deoxyviolacein (purple). The membrane engineering strategies reported here are generally applicable to microbial production of a broader range of hydrophobic natural products, contributing to food, cosmetic, chemical, and pharmaceutical industries.

Effects of cell physiological structure on the fermentation broth viscosity during poly-γ-glutamic acid production by Bacillus subtilis GXA-28

The high viscosity of fermentation broth limited the further improvement of PGA titer. Our previous studies indicated that adding KCl to the medium could decrease the fermentation broth viscosity and improve the PGA titer. In order to clarify the reason, effects of cell physiological structure on the fermentation broth viscosity were investigated. Results from cell morphology observation showed that the reduction of cell aggregation caused by the weakened cross-linking between PGA and cells might be an important reason for the decrease in the fermentation broth viscosity. Besides, when 201.2 mM KCl was added to the medium, the zeta potential of cell surface decreased from - 70.48 ± 3.35 mV to - 81 ± 2.46 mV. The cell membrane integrity was reduced and permeability was enhanced. Furthermore, the percentage of lauric acid C12:0 in cell membrane increased by 12.36%, but palmitic acid C16:0 and stearic acid C18:0 decreased by 6.83% and 5.64%, respectively, which improved the fluidity of cell membrane. The above changes in cell membrane further affect the cross-linking between PGA and cells, thereby playing an important role in reducing the fermentation broth viscosity. This study provided some novel information for understanding the decrease of PGA fermentation broth viscosity by KCl.

High-level production of poly-γ-glutamic acid from untreated molasses by Bacillus siamensis IR10

Background

Poly-γ-glutamic acid (γ-PGA) is a promising biopolymer and has been applied in many fields. Bacillus siamensis SB1001 was a newly isolated poly-γ-glutamic acid producer with sucrose as its optimal carbon source. To improve the utilization of carbon source, and then molasses can be effectively used for γ-PGA production, ⁶⁰cobalt gamma rays was used to mutate the genes of B. siamensis SB1001.

Results

Bacillus siamensis IR10 was screened for the production of γ-PGA from untreated molasses. In batch fermentation, 17.86 ± 0.97 g/L γ-PGA was obtained after 15 h, which is 52.51% higher than that of its parent strain. Fed-batch fermentation was performed to further improve the yield of γ-PGA with untreated molasses, yielding 41.40 ± 2.01 g/L of γ-PGA with a productivity of 1.73 ± 0.08 g/L/h. An average γ-PGA productivity of 1.85 g/L/h was achieved in the repeated fed-batch fermentation. This is the first report of such a high γ-PGA productivity. The analysis of the enzyme activities showed that they were affected by the carbon sources, enhanced ICDH and GDH, and decreased ODHC, which are important for γ-PGA production.

Conclusion

These results suggest that untreated molasses can be used for economical and industrial-scale production of γ-PGA by B. siamensis IR10.

Isolation of a novel poly-γ-glutamic acid-producing Bacillus licheniformis A14 strain and optimization of fermentation conditions for high-level production

In the present study, bacteria producing poly-γ-glutamic acid were isolated from marine sands, and an efficient producer identified. γ-PGA was rapidly screened by thin-layer chromatography and UV spectrophotometer assay. Media optimization was carried out, and for the cost-effective production of γ-PGA, monosodium glutamate was used as the substrate for the synthesis of γ-PGA instead of glutamic acid. Lastly, Plackett-Buman design (PB) and Response surface methodology (RSM) were used to determine significant media components and their interaction effect to achieve maximum γ-PGA production. With this integrated method, a bacterial strain with a high yield of γ-PGA was obtained rapidly, and the production was increased up to 37.8 g/L after optimization.

Deciphering metabolic responses of biosurfactant lichenysin on biosynthesis of poly-γ-glutamic acid

Poly-γ-glutamic acid (γ-PGA) is an extracellularly produced biodegradable polymer, which has been widely used as agricultural fertilizer, mineral fortifier, cosmetic moisturizer, and drug carrier. This study firstly discovered that lichenysin, as a biosurfactant, showed the capability to enhance γ-PGA production in Bacillus licheniformis. The exogenous addition of lichenysin improved the γ-PGA yield up to 17.9% and 21.9%, respectively, in the native strain B. licheniformis WX-02 and the lichenysin-deficient strain B. licheniformis WX02-ΔlchAC. The capability of intracellular biosynthesis of lichenysin was positively correlated with γ-PGA production. The yield of γ-PGA increased by 25.1% in the lichenysin-enhanced strain B. licheniformis WX02-Psrflch and decreased by 12.2% in the lichenysin-deficient strain WX02-ΔlchAC. Analysis of key enzyme activities and gene expression in the TCA cycle, precursor glutamate synthesis, and γ-PGA synthesis pathway revealed that the existence of lichenysin led to increased γ-PGA via shifting the carbon flux in the TCA cycle towards glutamate and γ-PGA biosynthetic pathways, minimizing by-product formation, and facilitating the uptake of extracellular substrates and the polymerization of glutamate to γ-PGA. Insight into the mechanisms of enhanced production of γ-PGA by lichenysin would define the essential parameters involved in γ-PGA biosynthesis and provide the basis for large-scale production of γ-PGA.

Rewiring glycerol metabolism for enhanced production of poly-γ-glutamic acid in Bacillus licheniformis

BACKGROUND

Poly-γ-glutamic acid (γ-PGA) is a natural polymer with great potential applications in areas of agriculture, industry, and pharmaceutical. The biodiesel-derived glycerol can be used as an attractive feedstock for γ-PGA production due to its availability and low price; however, insufficient production of γ-PGA from glycerol is limitation.

RESULTS

The metabolic pathway of Bacillus licheniformis WX-02 was rewired to improve the efficiency of glycerol assimilation and the supply of NADPH for γ-PGA synthesis. GlpK, GlpX, Zwf, and Tkt1 were found to be the key enzymes for γ-PGA synthesis using glycerol as a feedstock. Through combinational expression of these key enzymes, the γ-PGA titer increased to 19.20 ± 1.57 g/L, which was 1.50-fold of that of the wild-type strain. Then, we studied the flux distributions, gene expression, and intracellular metabolites in WX-02 and the recombinant strain BC4 (over-expression of the above quadruple enzymes). Our results indicated that over-expression of the quadruple enzymes redistributed metabolic flux to γ-PGA synthesis. Furthermore, using crude glycerol as carbon source, the BC4 strain showed a high productivity of 0.38 g/L/h, and produced 18.41 g/L γ-PGA, with a high yield of 0.46 g γ-PGA/g glycerol.

CONCLUSIONS

The approach to rewiring of metabolic pathways enables B. licheniformis to efficiently synthesize γ-PGA from glycerol. The γ-PGA productivity reported in this work is the highest obtained in glutamate-free medium. The present study demonstrates that the recombinant B. licheniformis strain shows significant potential to produce valuable compounds from crude glycerol.

Genetic and metabolic engineering for microbial production of poly-γ-glutamic acid

Poly-γ-glutamic acid (γ-PGA) is a natural biopolymer of glutamic acid. The repeating units of γ-PGA may be derived exclusively from d-glutamic acid, or l-glutamic acid, or both. The monomer units are linked by amide bonds between the α-amino group and the γ-carboxylic acid group. γ-PGA is biodegradable, edible and water-soluble. It has numerous existing and emerging applications in processing of foods, medicines and cosmetics. This review focuses on microbial production of γ-PGA via genetically and metabolically engineered recombinant bacteria. Strategies for improving production of γ-PGA include modification of its biosynthesis pathway, enhancing the production of its precursor (glutamic acid), and preventing loss of the precursor to competing byproducts. These and other strategies are discussed. Heterologous synthesis of γ-PGA in industrial bacterial hosts that do not naturally produce γ-PGA is discussed. Emerging trends and the challenges affecting the production of γ-PGA are reviewed.

Improvement of glycerol catabolism in Bacillus licheniformis for production of poly-γ-glutamic acid

Bacillus licheniformis WX-02 is a well-studied strain to produce poly-γ-glutamic acid (γ-PGA) with numerous applications. This study is to improve WX-02 strain's capability of assimilating glycerol, a major byproduct of biofuels industries, through metabolic manipulation. Through gene knockout, the GlpK pathway was identified as the sole functional glycerol catabolism pathway, while the DhaK pathway was inactive for this strain under either aerobic or anaerobic conditions. The enhancement of glycerol utilization was attempted by substituting the native glpFK promoter with the constitutive promoter (P43), ytzE promoter (PytzE), and bacABC operon promoter (PbacA), respectively. The glycerol consumptions of the corresponding mutant strains WX02-P43glpFK, WX02-PytzEglpFK, and WX02-PbacAglpFK were 30.9, 26.42, and 18.8% higher than that of the WX-02 strain, respectively. The γ-PGA concentrations produced by the three mutant strains were 33.71, 23.39, and 30.05% higher than that of WX-02 strain, respectively. When biodiesel-derived crude glycerol was used as the carbon source, the mutant WX02-P43glpFK produced 16.63 g L^-1 of γ-PGA, with a productivity of 0.35 g L^-1 h^-1. Collectively, this study demonstrated that glycerol can be used as an effective substrate for producing γ-PGA by metabolic engineering B. licheniformis strains.

Improving Escherichia coli membrane integrity and fatty acid production by expression tuning of FadL and OmpF

Background

Construction of microbial biocatalysts for the production of biorenewables at economically viable yields and titers is frequently hampered by product toxicity. Membrane damage is often deemed as the principal mechanism of this toxicity, particularly in regards to decreased membrane integrity. Previous studies have attempted to engineer the membrane with the goal of increasing membrane integrity. However, most of these works focused on engineering of phospholipids and efforts to identify membrane proteins that can be targeted to improve fatty acid production have been unsuccessful.

Results

Here we show that deletion of outer membrane protein ompF significantly increased membrane integrity, fatty acid tolerance and fatty acid production, possibly due to prevention of re-entry of short chain fatty acids. In contrast, deletion of fadL resulted in significantly decreased membrane integrity and fatty acid production. Consistently, increased expression of fadL remarkably increased membrane integrity and fatty acid tolerance while also increasing the final fatty acid titer. This 34% increase in the final fatty acid titer was possibly due to increased membrane lipid biosynthesis. Tuning of fadL expression showed that there is a positive relationship between fadL abundance and fatty acid production. Combinatorial deletion of ompF and increased expression of fadL were found to have an additive role in increasing membrane integrity, and was associated with a 53% increase the fatty acid titer, to 2.3 g/L.

Conclusions

These results emphasize the importance of membrane proteins for maintaining membrane integrity and production of biorenewables, such as fatty acids, which expands the targets for membrane engineering.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0650-8) contains supplementary material, which is available to authorized users.

Cryoprotection of probiotic bacteria with poly-γ-glutamic acid produced by Bacillus subtilis and Bacillus licheniformis

Poly-γ-glutamic acid (γ-PGA) is a naturally occurring biopolymer made up of repeating units of glutamic acid and can be potentially used for multiple applications. This study compared the production of γ-PGA by Bacillus subtilis and Bacillus licheniformis in GS and E media. The highest γ-PGA production was achieved using initial glycerol concentration of 40 and 80 g/l, ammonium chloride as the nitrogen source, 20 g/l glutamic acid at pH 6.5 for 72 h using E medium. On characterization, it was observed that glutamic acid was the sole component of the purified material. It contained a mixture of Na-γ-PGA and H⁺-γ-PGA. The survival of probiotics during freeze drying was improved by combining them with γ-PGA polymer. For Lactobacilli, 10% γ-PGA protected the cells significantly than 10% sucrose during freeze drying. γ-PGA protection was shown to improve the viability of probiotic bacteria in orange juice for 40 days. No considerable change was observed in the concentrations of citric acid, malic acid and ascorbic acid when probiotic bacteria and γ-PGA were introduced into orange juice and hence, it could be used as a non-dairy delivery platform for these bacteria.

Fermentative production of poly (γ-glutamic acid) from renewable carbon source and downstream purification through a continuous membrane-integrated hybrid process

Experimental investigations were carried out on continuous and direct production of poly-(γ-glutamic acid) in a hybrid reactor system that integrated conventional fermentative production step with membrane-based downstream separation and purification. Novelty of the integrated system lies in high degree of purity, conversion, yield and productivity of poly-(γ-glutamic acid) through elimination of substrate-product inhibitions of traditional batch production system. This new system is compact, flexible, eco-friendly and largely fouling-free ensuring steady and continuous production of poly-(γ-glutamic acid) directly from a renewable carbon source at the rate of 0.91 g/L/h. Cross-flow microfiltration membrane modules ensured almost complete separation and recycle of cells without much fouling problem. Well-screened ultrafiltration membrane module helped to concentrate poly-(γ-glutamic acid) while ensuring recovery and recycle of 96% unconverted carbon source resulting in yield of 0.6g/g along with high product purity.

Effects of metabolic pathway precursors and polydimethylsiloxane (PDMS) on poly-(gamma)-glutamic acid production by Bacillus subtilis BL53

The aims of this study were to evaluate the effects of the addition of metabolic precursors and polydimethylsiloxane (PDMS) as an oxygen carrier to cultures of Bacillus subtilis BL53 during the production of γ-PGA. Kinetics analyses of cultivations of different media showed that B. subtilis BL53 is an exogenous glutamic acid-dependent strain. When the metabolic pathway precursors of γ-PGA synthesis, l-glutamine and a-ketoglutaric acid, were added to the culture medium, production of the biopolymer was increased by 20 % considering the medium without these precursors. The addition of 10 % of the oxygen carrier PDMS to cultures caused a two-fold increase in the volumetric oxygen mass transfer coefficient (kLa), improving γ-PGA production and productivity. Finally, bioreactor cultures of B. subtilis BL53 adopting the combination of optimized medium E, added of glutamine, α-ketoglutaric acid, and PDMS, showed a productivity of 1 g L−1 h−1 of g-PGA after only 24 h of cultivation. Results of this study suggest that the use of metabolic pathway precursors glutamine and a-ketolgutaric acid, combined with the addition of PDMS as an oxygen carrier in bioreactors, can improve γ-PGA production and productivity by Bacillus strains .

High-level exogenous glutamic acid-independent production of poly-(γ-glutamic acid) with organic acid addition in a new isolated Bacillus subtilis C10

A new exogenous glutamic acid-independent γ-PGA producing strain was isolated and characterized as Bacillus subtilis C10. The factors influencing the endogenous glutamic acid supply and the biosynthesis of γ-PGA in this strain were investigated. The results indicated that citric acid and oxalic acid showed the significant capability to support the overproduction of γ-PGA. This stimulated increase of γ-PGA biosynthesis by citric acid or oxalic acid was further proved in the 10 L fermentor. To understand the possible mechanism contributing to the improved γ-PGA production, the activities of four key intracellular enzymes were measured, and the possible carbon fluxes were proposed. The result indicated that the enhanced level of pyruvate dehydrogenase (PDH) activity caused by oxalic acid was important for glutamic acid synthesized de novo from glucose. Moreover, isocitrate dehydrogenase (ICDH) and glutamate dehydrogenase (GDH) were the positive regulators of glutamic acid biosynthesis, while 2-oxoglutarate dehydrogenase complex (ODHC) was the negative one.

Poly (glutamic acid)--an emerging biopolymer of commercial interest

Poly (γ-glutamic acid) (PGA) is water-soluble, anionic, biodegradable, and edible biopolymer produced by Bacillus subtilis. It has multifarious potential applications in foods, pharmaceuticals, healthcare, water treatment and other fields. The production of PGA has already been established on the industrial scale. Various studies regarding the fermentative production, downstream processing and characterization of PGA have been reported in the literature. This review provides updated information on fermentative production of PGA by various bacterial strains and effect of fermentation conditions and media component on production of PGA in submerged as well as solid state fermentation. Information on the application of genetic engineering for enhancement of yield of PGA, kinetic studies for production of PGA in submerged fermentation and recovery and purification of PGA is included. An attempt has also been made to review the current and potential applications of PGA. This review may contribute to further development of this commercially and academically interesting biopolymer.

Flocculating Properties of the Novel Bioflocculant Poly(γ-Glutamic Acid) and its Use in Jean Dyeing Wastewater Treatment

We studied a novel bioflocculant poly(γ-glutamic acid) (PGA). With the addition of 4mg/L PGA (Mw=9×105Da) and 12 Mm CaCl2, the optimal temperature for flocculation performance of PGA in the kaolin suspension was about 30°C, giving the highest flocculating activity of 98%, respectively. Studies of the flocculating properties revealed that it was stable at 30-90°C and pH 7-11. With treatment of jean dyeing wastewater flocculation, PGA showed that the color, COD, NH3-N, alkalinity and hardness removal ratios were 90%, 91.7%, 73.3%, 65 % and 86 %, respectively. Bioflocculant PGA may find possible application as an alternative for textile dyeing industry and environmental bioremediation.

The statistically optimized production of poly(gamma-glutamic acid) by batch fermentation of a newly isolated Bacillus subtilis RKY3

For the production of poly(gamma-glutamic acid), a newly isolated Bacillus sp. RKY3 was phylogenetically identified as Bacillus subtilis based on its 16S rRNA gene sequence. The culture medium for the production of poly(gamma-glutamic acid) by B. subtilis RKY3 was optimized statistically. The parameters significantly affecting poly(gamma-glutamic acid) production were found to be glycerol, glutamic acid, yeast extract, and K(2)HPO(4). A further advanced statistical approach, central composite design, found the optimum levels of the screened variables as follows (gl(-1)): glycerol 17.6, glutamic acid 59.6; yeast extract 2.7; K(2)HPO(4) 2.3. The predicted response as poly(gamma-glutamic acid) production under the statistically optimized conditions was 48.5 g l(-1), which was only 0.4% different from the maximum poly(gamma-glutamic acid) concentration (48.7 g l(-1)) observed at the validation experiment using 7-l lab-scale fermentor containing 3 l of working volume.

A statistical approach to optimization of fermentative production of poly(gamma-glutamic acid) from Bacillus licheniformis NCIM 2324

This paper reports on the optimization of poly(gamma-glutamic acid) (PGA) production by Bacillus licheniformis NCIM 2324 using a statistical approach. One-factor-at-a-time method was used to investigate the effect of carbon sources, nitrogen sources and pH on PGA production. Plackett-Burman design was adopted to select the most important nutrients influencing the yield of PGA. After identifying effective nutrients, response surface methodology was used to develop a mathematical model to identify the optimum concentrations of the key nutrients for higher PGA production, and confirm its validity experimentally. PGA production increased significantly from 5.27 to 26.12 g/l when the strain was cultivated in the optimal medium developed by using statistical approach, as compared to basal medium.

Microbial Biosynthesis of Polyglutamic Acid Biopolymer and Applications in the Biopharmaceutical, Biomedical and Food Industries

This review article provides an updated critical literature review on the production and applications of Polyglutamic Acid (PGA). alpha-PGA is synthesized chemically, whereas gamma-PGA can be produced by a number of microbial species, most prominently various Bacilli. Great insight into the microbial formation of gamma-PGA has been gained thanks to the development of molecular biological techniques. Moreover, there is a great variety of applications for both isoforms of PGA, many of which have not been discovered until recently. These applications include: wastewater treatment, food products, drug delivery, medical adhesives, vaccines, PGA nanoparticles for on-site drug release in cancer chemotherapy, and tissue engineering.