Biodegradability and mechanical properties of polycaprolactone composites encapsulating phosphate-solubilizing bacterium Bacillus sp. PG01

Microplastics Biodegradation by Estuarine and Landfill Microbiomes

Plastic pollution poses a worldwide environmental challenge, affecting wildlife and human health. Assessing the biodegradation capabilities of natural microbiomes in environments contaminated with microplastics is crucial for mitigating the effects of plastic pollution. In this work, we evaluated the potential of landfill leachate (LL) and estuarine sediments (ES) to biodegrade polyethylene (PE), polyethylene terephthalate (PET), and polycaprolactone (PCL), under aerobic, anaerobic, thermophilic, and mesophilic conditions. PCL underwent extensive aerobic biodegradation with LL (99 ± 7%) and ES (78 ± 3%) within 50-60 days. Under anaerobic conditions, LL degraded 87 ± 19% of PCL in 60 days, whereas ES showed minimal biodegradation (3 ± 0.3%). PE and PET showed no notable degradation. Metataxonomics results (16S rRNA sequencing) revealed the presence of highly abundant thermophilic microorganisms assigned to Coprothermobacter sp. (6.8% and 28% relative abundance in anaerobic and aerobic incubations, respectively). Coprothermobacter spp. contain genes encoding two enzymes, an esterase and a thermostable monoacylglycerol lipase, that can potentially catalyze PCL hydrolysis. These results suggest that Coprothermobacter sp. may be pivotal in landfill leachate microbiomes for thermophilic PCL biodegradation across varying conditions. The anaerobic microbial community was dominated by hydrogenotrophic methanogens assigned to Methanothermobacter sp. (21%), pointing at possible syntrophic interactions with Coprothermobacter sp. (a H2-producer) during PCL biodegradation. In the aerobic experiments, fungi dominated the eukaryotic microbial community (e.g., Exophiala (41%), Penicillium (17%), and Mucor (18%)), suggesting that aerobic PCL biodegradation by LL involves collaboration between fungi and bacteria. Our findings bring insights on the microbial communities and microbial interactions mediating plastic biodegradation, offering valuable perspectives for plastic pollution mitigation.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Application of polysaccharides for the encapsulation of beneficial microorganisms for agricultural purposes: A review

Intensive farming practices have increased the consumption of chemical-based pesticides and fertilizers thereby creating health issues for humans and animals and also causing a deterioration in the natural ecosystem. The promotion of biomaterials synthesis could potentially lead to the replacement of synthetic products and improve soil fertility, protect plants from pathogen attacks, and enhance the productivity of the agricultural sector resulting in less environmental pollution. Microbial bioengineering involving the use and improvement of encapsulation using polysaccharides has the required potential to address environmental issues and promote green chemistry. This article describes various encapsulation techniques and polysaccharides which have an immense applicable capability to encapsulate microbial cells. The review elucidates the factors that may result in a reduced viable cell count during encapsulation, particularly using the spray drying method, where a high temperature is required to dry the suspension, this may damage the microbial cells. The environmental advantage of the application of polysaccharides as carriers of beneficial microorganisms, which do not pose a risk for soil due to their full biodegradability, was also shown. The encapsulated microbial cells may assist in addressing certain environmental problems such as ameliorating the unfavourable effects of plant pests and pathogens, and promoting agricultural sustainability.

Exploring the roles of starch for microbial encapsulation through a systematic mapping review

Microorganism encapsulation protects them from stressful conditions and assists in maintaining their viability, being especially beneficial when the carrier material is a renewable and biodegradable biopolymer, such as starch. Here, a systematic mapping was performed to provide a current overview on the use of starch-based systems for microbial encapsulation. Following well-established guidelines, a systematic mapping was conducted and the following could be drawn: 1) there was a significant increase in publications on microbial encapsulation using starch over the past decade, showing interest from the scientific community, 2) ionotropic gelation, emulsification and spray drying are the most commonly used techniques for starch-based microbial encapsulation, and 3) starch play important functions in the encapsulation matrix such as assisting in the survival of the microorganisms. The information gathered in this systematic mapping can be useful to guide researchers and industrial sectors on the development of innovative starch-based systems for microbial encapsulation.

Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone

In this investigation, biodegradable composites were fabricated with polycaprolactone (PCL) matrix reinforced with pine cone powder (15%, 30%, and 45% by weight) and compatibilized with graphite powder (0%, 5%, 10%, and 15% by weight) in polycaprolactone matrix by compression molding technique. The samples were prepared as per ASTM standard and tested for dimensional stability, biodegradability, and fracture energy with scanning electron micrographs. Water-absorption and thickness-swelling were performed to examine the dimensional stability and tests were performed at 23 °C and 50% humidity. Results revealed that the composites with 15 wt % of pine cone powder (PCP) have shown higher dimensional stability as compared to other composites. Bio-composites containing 15-45 wt % of PCP with low graphite content have shown higher disintegration rate than neat PCL. Fracture energy for crack initiation in bio-composites was increased by 68% with 30% PCP. Scanning electron microscopy (SEM) of the composites have shown evenly-distributed PCP particles throughout PCL-matrix at significantly high-degrees or quantities of reinforcing.

Bioformulation of Microbial Fertilizer Based on Clay and Alginate Encapsulation

This study aims to develop new formulations for microbial fertilizers Pseudomonas fluorescens Ms-01 (Pf) and Azosprillum brasilense DSM1690 (Ab) using two kinds of clay minerals. The studied formulations were prepared as hybrid materials based on halloysite and alginate [Ha-Ag] or montmorillonite and alginate polymers [Mt-Ag] and were applied to the bacterial strains to develop low cost, efficient, and slow-release capsules. Their efficiency was evaluated in comparison with alginate [Ag] as the control. The produced capsules were spherical in shape and were chemically and physically characterized and further analyzed for their swelling ratios, soil biodegradability, release kinetics of microbial cells, and their survival stability over 3 months of storage under different conditions (room temperature vs 4 °C). The effect of the capsules on the growth of wheat plants was also investigated. Results showed that both formulations were able to preserve bacterial survival which reached 14.8 log CFU g^-1 after 3 months storage in the halloysite formulation. The swelling ratios were ranged between 61.5 ± 1.35% and 36.5 ± 5% for the montmorillonite and the halloysite formulations, respectively. The release kinetics revealed the slow-release capacity of the capsules mainly with the halloysite formulation which significantly released bacterial cells after 15 days of incubation in saline water (15.24 log CFU mL^-1). The application of the capsules to wheat plants significantly increased root and shoot biomasses and nitrogen content in the roots. In conclusion, halloysite minerals seem to be more adapted as additive to alginate in microbial encapsulation.

Biodegradation Assessment of Poly (Lactic Acid) Filled with Functionalized Titania Nanoparticles (PLA/TiO2) under Compost Conditions

This paper presents a biodegradation study conducted for 90 days under standardized controlled composting conditions of poly (lactic acid) (PLA) filled with functionalized anatase-titania nanofiller (PLA/TiO₂ nanocomposites). The surface morphology, thermal properties, percentage of biodegradation, and molecular weight changes at different incubation times were evaluated via visual inspection, scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC) by taking degraded samples from compost at the end of target biodegradation time interval. The rapid increase of crystallinity indicated that the PLA and PLA/TiO₂ nanocomposites had heterogeneous degradation mechanisms under controlled composting conditions. The biodegradation rate of PLA/TiO₂ nanocomposites was higher than that of pure PLA because water molecules easily penetrated the nanocomposites. The dispersion of the nanoparticles in the PLA/TiO₂ nanocomposites affected the biodegradation rate of PLA. Moreover, the biodegradation of PLA could be controlled by adding an amount of dispersed TiO₂ nanofillers under controlled composting conditions.

The Significant Influence of Bacterial Reaction on Physico-Chemical Property Changes of Biodegradable Natural and Synthetic Polymers Using Escherichia coli

Escherichia coli (E. coli) was used to activate hydrolysis reaction along with biodegradation in natural and synthetic fibers to identify possibilities as alternative substitutes for textile wastes using chemical solutions and enzymes. To confirm the reaction between the bacterial infections of E. coli and the excessively abundant interstitial spaces of the fibers, various types of natural and synthetic fibers such as cotton, wool, polyethylene terephalate (PET), polyadmide (PA), polyethylene (PE), and polypropylene (PP) were used to confirm the physico-chemical reactions. Tensile strength analysis, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle analysis were used to determine the physico-chemical property changes of the fiber by the bacteria. When biofilm was formed on the fiber surface, various physical changes such as the following were observed: (i) in the analysis of tensile strength, all except PA and PP were decreased and a decrease in cotton fibers was noticeable (ii) depending on the type of fibers, the degree of roughness was different, but generally the surface became rough. In this study, the change of roughness was the most severe on the cotton fiber surface and the change of PET and PA fiber was relatively small. It was found that the intensity peak of oxygen was increased, except for the in cases of PA and PP, through the change of chemical properties by XPS analysis. Changes in topographical properties on the surface through contact angle analysis were stronger in hydrophilic properties, and in the case of cotton, completely hydrophilic surfaces were formed. Through this study, PA and PP fibers, which are Olefin fibers, were theoretically free of physicochemical and topographical changes since there were no functional groups that could trigger the hydrolysis reaction.

Bio-based polycarbonate as synthetic toolbox

Completely bio-based poly(limonene carbonate) is a thermoplastic polymer, which can be synthesized by copolymerization of limonene oxide (derived from limonene, which is found in orange peel) and CO2. Poly(limonene carbonate) has one double bond per repeating unit that can be exploited for further chemical modifications. These chemical modifications allow the tuning of the properties of the aliphatic polycarbonate in nearly any direction. Here we show synthetic routes to demonstrate that poly(limonene carbonate) is the perfect green platform polymer, from which many functional materials can be derived. The relevant examples presented in this study are the transformation from an engineering thermoplastic into a rubber, addition of permanent antibacterial activity, hydrophilization and even pH-dependent water solubility of the polycarbonate. Finally, we show a synthetic route to yield the completely saturated counterpart that exhibits improved heat processability due to lower reactivity.

Biodegradability, cellular compatibility and cell infiltration of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in comparison with poly(ε-caprolactone) and poly(lactide-co-glycolide)

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate), poly(ε-caprolactone), and poly(1actide-co-glycolide) films were prepared by solution casting and electrospinning. The degradability of cast films was evaluated in vitro and in vivo by recording the weight remaining, observing the morphology, and measuring change in molecular weight and Mw/ Mn polydispersity. In addition, cell proliferation on electrospun films was tested by MTT assay, and cell infiltration into electrospun films was assessed through subcutaneous implantation in rats. By analyzing data obtained from these tests, we discovered that the degradation rates of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymers were between those of poly(ε-caprolactone) and poly(1actide-co-glycolide) and could be controlled by adjusting 4-hydroxybutyrate content. Moreover, tissue responses to materials made from poly(3-hydroxybutyrate-co-4-hydroxybutyrate) were milder compared with those elicited by poly(ε-caprolactone) and poly(1actide-co-glycolide), and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) films exhibited a good and moderate cell infiltration. Therefore, our data demonstrate that poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymers are promising candidates for the construction of scaffolds designed for various types of tissue regeneration with special biodegradability requirements.

Preparation and characterization of KGM-g-St/BA fibers and core/shell PCL/KGM-g-St/BA fibers

KGM-g-St/BA copolymer was synthesized via free-radical polymerization, KGM-g-St/BA fibers and KGM-g-St/BA (shell)/PCL (core) fibers were prepared by electrospinning.

Biodegradable and elastomeric poly(glycerol sebacate) as a coating material for nitinol bare stent

We synthesized and evaluated biodegradable and elastomeric polyesters (poly(glycerol sebacate) (PGS)) using polycondensation between glycerol and sebacic acid to form a cross-linked network structure without using exogenous catalysts. Synthesized materials possess good mechanical properties, elasticity, and surface erosion biodegradation behavior. The tensile strength of the PGS was as high as 0.28 ± 0.004 MPa, and Young's modulus was 0.122 ± 0.0003 MPa. Elongation was as high as 237.8 ± 0.64%, and repeated elongation behavior was also observed to at least three times the original length without rupture. The water-in-air contact angles of the PGS surfaces were about 60°. We also analyzed the properties of an electrospray coating of biodegradable PGS on a nitinol stent for the purpose of enhancing long-term patency for the therapeutic treatment of varicose veins disease. The surface morphology and thickness of coating layer could be controlled by adjusting the electrospraying conditions and solution parameters.

Survival of introduced phosphate-solubilizing bacteria (PSB) and their impact on microbial community structure during the phytoextraction of Cd-contaminated soil

This study was conducted to investigate whether or not phosphate-solubilizing bacteria (PSB) as a kind of plant growth promoting rhizobacteria enhance the uptake of Cd by plants. In addition, the effect of PSB augmentation during phytoextraction on the microbial community of indigenous soil bacteria was also studied. In the initial Cd-contaminated soil, the major phyla were Proteobacteria (35%), Actinobacteria (38%) and Firmicutes (8%). While Proteobacteria were dominant at the second and sixth week (41 and 54%, respectively) in inoculated soil, Firmicutes (mainly belonging to the Bacilli class-61%), dramatically increased in the eight-week soil. For the uninoculated soil, the proportion of α-Proteobacteria increased after eight weeks (32%). Interestingly, Actinobacteria class, which was originally present in the soil (37%), seemed to disappear during phytoremediation, irrespective of whether PSB was inoculated or not. Cluster analysis and Principal Component Analysis revealed that the microbial community of eight-week inoculated soil was completely separated from the other soil samples, due to the dramatic increase of Bacillus aryabhattai. These findings revealed that it took at least eight weeks for the inoculated Bacillus sp. to functionally adapt to the introduced soil, against competition with indigenous microorganisms in soil. An ecological understanding of interaction among augmented bacteria, plant and indigenous soil bacteria is needed, for proper management of phytoextraction.

Effects of a Polycaprolactone (PCL) Tissue Scaffold in Rattus norvegicus on Blood Flow

Tissue engineering aims to save lives by producing synthetic organs and bone. This study is attempting to determine what effects a polycaprolactone (PCL) scaffold will have on the blood flow of Rattus norvegicus, as measured by the number of platelets. Prior to experimentation, it was hypothesized that the polycaprolactone scaffold would maintain and/or increase the number of platelets when compared to the control group. This was developed based on prior research that showed polylactic acid (PLA), a polymer being used currently, and polycaprolactone had similar characteristics like boiling point, melting point, and glass transition temperature. To test this hypothesis, the PCL, created from an existing protocol, was used to mold a scaffold in vitro. Three groups of rats were identified, then further split into an “A” and “B” subdivision with 5 members in each. All “A” subdivision members received the scaffold, while the "B" factions lacked it. Each rat underwent surgery to remove 1mm of the right ventricle, which was replaced by the PCL scaffold in the experimental group. The control group did not have the scaffold replacement. Without this piece of the right ventricle, prior research conducted at the University of Virginia in 2006 suggests that the rats would die within one week. However, in the experimental group of rats, the missing piece of the ventricle was replaced with the scaffold, so if it were accepted then the rats would survive beyond 1week. All rats in the experimental group died exactly 1 week after the control group as predicted before experimentation. After all of the rats had a 1-week acclimation period, a 1mm^2 slice of the heart was extracted and then the number of platelets was counted using a phase contrast microscope. The heart extraction was prepared in a petri dish and then placed into a hemocytometer, splitting the dish into smaller sections making it possible to count. The data supports the hypothesis whereby an average 12% increase in the number of platelets in the rats with the PCL scaffold versus the group without it was seen. This increase in platelet count reflects an increase in blood flow. A statistical t-test was conducted on each trial (n=5 per group, n=10 total per trial) comparing experimental versus control group to calculate a p-value. The p-values were 0.034, 0.045, and 0.022, respectively which indicates statistical significance since the value is less than 0.05. After all experimentation, the benefits of using PCL in tissue engineering were examined. For example, PCL costs $80 less to produce per kilogram than polylactic acid. This study suggests that PCL would be a viable candidate for tissue engineering in humans.

Application of phosphate-solubilizing bacteria for enhancing bioavailability and phytoextraction of cadmium (Cd) from polluted soil

In this study, phosphate-solubilizing bacteria (PSB), Bacillus megaterium, were used to enhance Cd bioavailability and phytoextractability of Cd from contaminated soils. This strain showed a potential for directly solubilizing phosphorous from soils more than 10 folds greater than the control without inoculation. The results of pot experiments revealed that inoculation with B. megaterium significantly increased the extent of Cd accumulation in Brassica juncea and Abutilon theophrasti by two folds relative to the uninoculated control. The maximum Cd concentrations due to inoculation were 1.6 and 1.8 mg Cd g(-1) plant for B. juncea and A. theophrasti after 10 wk, respectively. The total biomass of A. theophrasti was not significantly promoted by the inoculation treatment, yet the total biomass of B. juncea increased from 0.087 to 0.448 g. It is also worth to mention that B. juncea predominantly accumulates Cd in its stems (39%) whereas A. theophrasti accumulates it in its leaves (68%) after 10 wk. The change of the Cd speciation indicated that inoculation of B. megaterium as PSB increased the bioavailabilty of Cd and consequently enhanced its uptake by plants. The present study may provide a new insight for improving phytoremediation using PSB in the Cd-contaminated soils.

Encapsulation of R. planticola Rs-2 from alginate-starch-bentonite and its controlled release and swelling behavior under simulated soil conditions

The plant growth-promoting bacteria (PGPR) Raoultella planticola Rs-2 was encapsulated with the various blends of alginate, starch, and bentonite for development of controlled-release formulations. The stability and release characteristics of these different capsule formulations were evaluated. The entrapment efficiency of Rs-2 in the beads (capsules) was more than 99%. The diameter of dry beads ranged from 0.98 to 1.41 mm. The bacteria release efficiency, swelling ratio, and biodegradability of the different bead formulations were enhanced by increasing the starch or alginate contents, but were impeded by higher bentonite content. The release kinetics of viable cells from capsules and the swelling ratio of capsules were studied in simulated soil media of varying temperature, moisture, pH, and salt content. The release of loaded Rs-2 cells and swelling of capsules are greatly affected by moisture, temperature, pH and salt content of the release medium. The release of viable Rs-2 cells from capsules was positively associated with the swelling properties of the capsules. The release of Rs-2 cells occurred through a Case II diffusion mechanism. In summary, this work indicates that alginate-starch-bentonite blends are a viable option for the development of efficient controlled-release formulations of Rs-2 biofertilizer, and which could have a promising application in natural field conditions.

In situ oxidation of petroleum-hydrocarbon contaminated groundwater using passive ISCO system

Groundwater contamination by gasoline spill is a worldwide environmental problem. Gasoline contains methyl tertiary-butyl ether (MTBE) (a fuel oxygenates) and benzene, which are the chemicals of concerns among the gasoline components. In this study, an in situ chemical oxidation (ISCO) barrier system was developed to evaluate the feasibility of applying this passive system on the control of MTBE and benzene plume in aquifer. The developed ISCO barrier contained oxidant-releasing materials, which could release oxidants (e.g., persulfate) when contact with water for the contaminants' oxidation in groundwater. In this study, laboratory-scale fill-and-draw experiments were conducted to determine the component ratios of the oxidant-releasing materials and evaluate the persulfate release rates. Results indicate that the average persulfate-releasing rate of 7.26 mg S(2)O(8)(2-)/d/g was obtained when the mass ratio of sodium persulfate/cement/sand/water was 1/1.4/0.24/0.7. The column study was conducted to evaluate the efficiency of in situ application of the developed ISCO barrier system on MTBE and benzene oxidation. Results from the column study indicate that approximately 86-92% of MTBE and 95-99% of benzene could be removed during the early persulfate-releasing stage (before 48 pore volumes of groundwater pumping). The removal efficiencies for MTBE and benzene dropped to approximately 40-56% and 85-93%, respectively, during the latter part of the releasing period due to the decreased persulfate-releasing rate. Results reveal that acetone, byproduct of MTBE, was observed and then further oxidized completely. Results suggest that the addition of ferrous ion would activate the persulfate oxidation. However, excess ferrous ion would compete with organic contaminants for persulfate, and thus, cause the decrease in contaminant oxidation rates. The proposed treatment scheme would be expected to provide a more cost-effective alternative to remediate MTBE, benzene, and other petroleum-hydrocarbon contaminated aquifers. Results from this study will be useful in designing a scale-up system for field application.