Understanding the performance of an AnMBR treating urban wastewater and food waste via model simulation and characterization of the microbial population dynamics

Microaeration promotes volatile siloxanes conversion to methane and simpler monomeric products

The ubiquitous use of volatile siloxanes in a myriad of product formulations has led to a widespread distribution of these persistent contaminants in both natural ecosystems and wastewater treatment plants. Microbial degradation under microaerobic conditions is a promising approach to mitigate D4 and D5 siloxanes while recovering energy in wastewater treatment plants. This study examined D4/D5 siloxanes biodegradation under both anaerobic and microaerobic conditions ( [Formula: see text]  = 0, 1, 3 %) using wastewater sludge. Results show that the use of microaeration in an otherwise strictly anaerobic environment significantly enhances siloxane conversion to methane. 16S rRNA gene sequencing identified potential degraders, including Clostridium lituseburense, Clostridium bifermentans and Synergistales species. Furthermore, chemical analysis suggested a stepwise siloxane conversion preceding methanogenesis under microaerobic conditions. This study demonstrates the feasibility of microaerobic siloxane biodegradation, laying groundwork for scalable removal technologies in wastewater treatment plants, ultimately highlighting the importance of using bio-based approaches in tackling persistent pollutants.

Impact of dewatering inorganic coagulants on anaerobic digestion treating food waste leachate

Anaerobic digestion of food waste leachate (FWL) provides a viable solution for waste treatment and energy production. Returning solids from digested sludge to the reactor maintains a high microbial concentration and enhances digestion efficiency. However, this requires coagulants because the digestate has low dewaterability. This study analyzed methane production and microbial communities using biochemical methane potential tests for inorganic coagulants (AlCl3, Al2(SO4)3, FeCl3, and Fe2(SO4)3) in FWL treatment. Cumulative methane production was the highest in the control and decreased in the order of Fe2(SO4)3, AlCl3, FeCl3, and Al2(SO4)3. Iron ions inhibited H2S production while aluminum ions increased it compared to the control group. Despite the absence of significant changes in microbial communities following coagulant injection, a substantial increase in damaged cells was observed. These findings highlight the intricate repercussions of coagulant introduction in anaerobic digestion, emphasizing notable alterations in methane production dynamics and the integrity of microbial cells.

Metagenomics and network analysis elucidating the coordination between fermentative bacteria and microalgae in a novel bacterial-algal coupling reactor (BACR) for mariculture wastewater treatment

To achieve the goal of treating mariculture wastewater economically and efficiently, a novel bacterial-algal coupling reactor (BACR) integrating acidogenic fermentation and microalgae cultivation was firstly investigated for mariculture wastewater treatment. Volatile fatty acids (VFAs) generated in the dark chamber migrated into the photo chamber for microalgal utilization, which alleviated the pH drop and feedback inhibition of the acidogenic fermentation. The maximum dry cell weight (DCW) of microalgae was 1.46 g/L, and pollutants such as chemical oxygen demand (COD), ammonium (NH₄⁺-N) and total phosphorus (TP) in the BACR were effectively removed under the mixotrophic culture condition. Furthermore, bacterial community profiles and functional genes in the BACR and single acidogenic fermentation reactor were identified. Compared with the single acidogenic fermentation reactor, most of the fermentative bacteria (e.g., Ruminococcus, Christensenellaceae R-7 group, Exiguobacterium, Pseudomonas and Levilinea) were enriched by the BACR. From the genetic perspective, the abundances of dominant genes (ackA, acs and atoD) associated with acetic, propionic and butyric acid production were greatly enhanced in the BACR. In the fatty acid biosynthesis pathway (ko00061), three kinds of high-abundance acetyl-CoA carboxylase genes and eight kinds of downstream functional genes were up-regulated in the BACR. Finally, based on co-occurrence network analysis, the coordination between fermentative bacteria and microalgae in the BACR was revealed. This study provided a deep insight into the advantage and potential of the BACR in mariculture wastewater treatment.

"Food waste-wastewater-energy/resource" nexus: Integrating food waste management with wastewater treatment towards urban sustainability

Sustainable food waste management is a global issue with high priority for improving food security and conserving natural resources and ecosystems. Diverting food waste from the solid waste stream to the wastewater stream is a promising way for food waste source separation, collection, treatment, and disposal. Given the advances in wastewater treatment, this integrated system has great potential for the concurrent recovery of water, resource, and energy. To this end, many efforts from lab-scale to full-scale studies have been devoted to evaluating the feasibility and associated impacts on both solid waste and wastewater systems. This paper summarizes the current status of food waste diversion from the aspects of principle and application. The impacts of food waste diversion on solid waste treatment, sewer system, wastewater treatment, and environmental benefits have been comprehensively reviewed and analysed. In the context of the critical review, this paper further identified the challenges of food waste diversion in unified definitions of the field, sewer network assessment, emerging wastewater treatment technologies, scale-up studies, and policy drivers. Perspectives on the contribution of food waste diversion to a food waste management hierarchy were discussed for initiating the nexus of "food waste-wastewater-energy/resource". We conclude that food waste diversion could facilitate sustainable urban development, but the area-specific factors (e.g., household practices, water resource, sewerage system condition, and treatment techniques) require adequate evaluations to determine the implementation. The outcomes of this study could contribute to the practice and policy-making of food waste management towards urban sustainability.

Enhancing sulfide mitigation via the sustainable supply of oxygen from air-nanobubbles in gravity sewers

Traditional air or oxygen injection is an effective and economical mitigation strategy for sulfide control in pressure sewers, but it is not suitable for gravity sewers due to the low solubility of oxygen in water under normal atmospheric conditions. Herein, an air-nanobubble (ANB) injection method was proposed for sulfide mitigation in gravity sewers, and its sulfide control efficiency was evaluated by long-term laboratory gravity sewer reactors. The results showed that an average inhibition rate of 45.36% for sulfide was obtained when ANBs were implemented, which was 3.75 times higher than that of the traditional air injection method, revealing the effectiveness and feasibility of the ANB injection method. As suggested by microbial community analysis of sewer biofilms, the relative abundance of sulfate-reducing bacteria (SRB) decreased 40.57% while that of sulfur oxidizing bacteria (SOB) increased 215.27% in the presence of ANBs, indicating that sulfide mitigation by ANB injection included both the inhibition of sulfide production and the oxidation of dissolved sulfide. The specific cost consumption of ANB injection was 1.7 $/kg-S, which was only 6.85% of that of traditional air injection (24.8 $/kg-S), suggesting that the sustainable supply of oxygen based on ANB injection is not only environmentally but also economically beneficial for sulfide mitigation. The findings of this study may provide an efficient sulfide mitigation strategy for the management of corrosion and malodour issues in the poorly ventilated gravity sewers.

Corncob ash boosts fermentative hydrogen production from waste activated sludge

With the increasing demand for sustainable development, the recycling and utilization of wastes has received widespread attention. This study proposed a green method of using one waste, corncob ash, to boost microbial the production of hydrogen from another waste, waste activated sludge, during anaerobic fermentation. The corncob ash dosage and the fermentative hydrogen production was positively correlated, and the maximum production of hydrogen reached up to 46.8 ± 1.0 mL/g VS, which was about 3.5 times that of the control group without corncob ash dosage (17.0 ± 0.9 mL/g VS). Mechanistic studies found that corncob ash was beneficial to the solubilization, hydrolysis and acetogenesis processes involved in fermentative hydrogen production process. The microbial community analysis indicated that corncob ash enriched more hydrolytic microorganisms (e.g., Bacteroides sp. and Leptolinea sp.), and has less impact on acidifying microorganisms, compared to the control group. The strategy of using corncob ash to boost the production of hydrogen during anaerobic waste activated sludge fermentation proposed in this study might provide a new waste-control-waste paradigm, making sludge disposal and wastewater treatment more sustainable.

Enhancing methane production from anaerobic digestion of waste activated sludge with addition of sodium lauroyl sarcosinate

In this study, sodium lauroyl sarcosinate (SLS) was used to promote anaerobic digestion of waste activated sludge for producing methane. It was found maximum cumulative methane production increased from 98.1 ± 3.1 to 166.0 ± 4.3 mL/g Volatile Suspended Solids (VSS) with dosage increasing from 0 (control) to 40 mg SLS/g TSS. But the addition of SLS (>10 mg SLS/g Total Suspended Solids (TSS)) resulted in prolonged lag phase time. Microbiological analysis showed that Syntrophobacter and Syntrophomonas both got enriched in reactors fed with SLS. Furthermore, hydrogenotrophic methanogens genus got more enrichment in contrast to acetoclastic methanogens. Mechanism analysis indicated that addition SLS could decrease surface tension, and promote release of organic matters as well as improve activities of hydrolytic enzymes. Besides, SLS could be nearly degraded completely within 3 days, and its degradation intermediates could be further transformed into methane gradually, thus enhancing methane production eventually.

Rhamnolipid pretreatment enhances methane production from two-phase anaerobic digestion of waste activated sludge

In this work, a rhamnolipid (RL) pretreatment technology was proposed to promote methane production from two-phase anaerobic digestion of waste activated sludge. In the first phase (i.e., acidogenic phase), the WAS hydrolysis and acidogenesis were significantly enhanced after RL pretreatment for 4 day, under which the concentration of soluble protein and the short-chain fatty acids (SCFA) in the presence of RL at 0.04 g/g TSS was respectively 2.50 and 5.02 times higher than that without RL pretreatment. However, methane production was inhibited in the presence of RL. In the second phase (i.e., methanogenic phase), batch biochemical methane potential tests suggested that the addition of RL is effective in promoting anaerobic methane production. With an increase of RL dosage from 0 to 0.04 g/g TSS, the cumulative methane yield increased from 100.42 ± 3.01 to 168.90 ± 5.42 mL. Although the added RL could be utilized to produce methane, it was not the major contributor to the enhancement of methane yield. Further analysis revealed that total cumulative yield from the entire two-phase anaerobic digestion (sum of the yield of the acidogenic phase and methanogenic phase) increased from 113.42 ± 3.56 to 164.18 ± 5.20 mL when RL dosage increased from 0 to 0.03 g/g TSS, indicating that the addition of RL induced positive effect on the methane production of the entire two-phase anaerobic digestion. The enzyme activity analysis showed that although higher dosages of RL still inhibited the microorganisms related to methanogenesis to some extends in the methanogenic phase, the inhibitory effect was significantly weakened compared to the acidogenic phase. Microbial analysis revealed that RL reduced the abundance of Candidatus_Methanofastidiosum sp. while increased the abundance of Methanosaeta sp., causing the major methanogenesis pathway to change from hydrogenotrophic to aceticlastic. Moreover, the community of hydrolytic microbes and acidogens was shifted in the direction that is conducive to hydrolysis-acidogenesis. The findings reported not only expand the application field of RL, but also may provide supports for sustainable operation of wastewater treatment plants (WWTPs).

Variable sediment methane production in response to different source-associated sewer sediment types and hydrological patterns: Role of the sediment microbiome

Production of methane (CH₄), an essential anthropogenic greenhouse gas, from municipal sewer sediment is a problem deserving intensive attention. Based on long-term laboratory batch tests in conjunction with 16 s rRNA gene sequencing and metagenomics, this study provides the first detailed assessment of the variable sediment CH₄ production in response to different pollution source-associated sewer sediment types and hydrological patterns, while addressing the role of the sediment microbiome. The high CH₄-production capability of sanitary sewer sediment is shaped by enriched biologically active substrate and dominated by acetoclastic methanogenesis (genus Methanosaeta). Moreover, it involves syntrophic interactions among fermentation bacteria, hydrogen-producing acetogens and methanogens. Distinct source-associated microbial species, denitrifying bacteria and sulfate-reducing bacteria occur in storm sewer and illicit discharge-associated (IDA) storm sewer sediments. This reveals their insufficient microbial function capabilities to support efficient methanogenesis. Hydrogenotrophic methanogenesis (genus Methanobacterium) prevails in both these sediments. In this context, storm sewer sediment has an extremely low CH₄-production capability, while IDA storm sewer sediment still shows significant carbon emission through a possibly unique mechanism. Hydrological connections promote the sewer sediment biodegradability and CH₄-production capability. In contrast, hydrological disconnection facilitates the prevalence of acetoclastic methanogenesis, sulfate-reducing enzymes, denitrification enzymes and the sulfur-utilizing chemolithoautotrophic denitrifier, which drastically decreases CH₄ production. Turbulent suspension of sediments results in relative stagnation of methanogenesis. This work bridges the knowledge gap and will help to stimulate and guide the resolution of 'bottom-up' system-scale carbon budgets and GHG sources, as well as the target CH₄ abatement interventions.

Limitation of voltage reversal in the degradation of azo dye by a stacked double-anode microbial fuel cell and characterization of the microbial community structure

In this study, two double-anode microbial fuel cells (MFCs) were connected in series for degradation of the azo dye reactive brilliant red X-3B. After the series connection, the electricity generation of one of the MFCs decreased, and the other was not affected too much. Due to the special structure in the double-anode MFC reduced the imbalanced performance between the MFC units, the occurrence of voltage reversal was limited. The removal efficiencies in two MFC reactors were not consistent after the series connection, the results showed that the MFC with the reduced electricity generation had the higher removal efficiencies, it was 12.90, 11.66, and 40.05% higher than in the MFC in which the power generation capacity was not affected after the series connection, the MFC without serial connection, and the control group, respectively. Meanwhile, the microbial communities related to the degradation of refractory organic compounds increased and related to electricity generation decreased in the MFC with the reduced electricity generation, the changes of the microbial communities were consistent with its electricity generation and the removal efficiencies. The degradation products in the effluent from two MFC units showed that had the products generated from the MFC with the reduced electricity generation had simpler structures comparing the other MFC unit.

A mathematical approach to predict the solids concentration in anaerobic membrane bioreactos (AnMBR): Evaluation of the volatile solids solubilization

Anaerobic Membrane Bioreactors (AnMBR) are gaining attention as a suitable approach for sustainable low-strength wastewater treatment, as they bring together the advantages of both anaerobic treatments and membrane bioreactors. However, increasing the sludge retention time (SRT) necessary to favor hydrolysis increases the suspended solids concentration potentially leading to decreased permeate flux. Therefore, the availability of a mathematical approach to predict the solids concentration within an AnMBR can be very useful. In this work, a mathematical model describing the volatile solids concentration within the reactor as a function of the operating parameters and the influent characteristics is developed. The solubilization of organic particulates was clearly influenced by temperature and the SRT, whereas the hydraulic retention time influence was negligible. Furthermore, the activation energy value of about 20 kJ mol^-1 confirms the idea that diffusion of hydrolytic enzymes from the bulk solution to the particle surface is the rate-limiting step of hydrolysis.

A review on anaerobic membrane bioreactors (AnMBRs) focused on modelling and control aspects

The use of anaerobic membrane bioreactor technology (AnMBR) is rapidly expanding. However, depending on the application, AnMBR design and operation is not fully mature, and needs further research to optimize process efficiency and enhance applicability. This paper reviews state-of-the-art of AnMBR focusing on modelling and control aspects. Quantitative environmental and economic evaluation has demonstrated substantial advantages in application of AnMBR to domestic wastewater treatment, but detailed modelling is less mature. While anaerobic process modelling is generally mature, more work is needed on integrated models which include coupling between membrane performance (including fouling) and the biological process. This should include microbial factors, which are important to generation of specific foulants such as soluble and particulate inert organics. Mature and well-established control tools, including better feedback control strategies are also required for both the process, and for fouling control.