Development of environmentally friendly lipase-catalysed kinetic resolution of (R,S)-1-phenylethyl acetate using aqueous natural deep eutectic solvents

Efficient Synthesis of Chiral Aryl Alcohol with a Novel Kosakonia radicincitans Isolate in Tween 20/L-carnitine: Lysine-Containing Synergistic Reaction System

Chiral trifluoromethyl alcohols as vital intermediates are of great interest in fine chemicals and especially in pharmaceutical synthesis. In this work, a novel isolate Kosakonia radicincitans ZJPH202011 was firstly employed as biocatalyst for the synthesis of (R)-1-(4-bromophenyl)-2,2,2-trifluoroethanol ((R)-BPFL) with good enantioselectivity. By optimizing fermentation conditions and bioreduction parameters in aqueous buffer system, the substrate concentration of 1-(4-bromophenyl)-2,2,2-trifluoroethanone (BPFO) was doubled from 10 to 20 mM, and the enantiomeric excess (ee) value for (R)-BPFL increased from 88.8 to 96.4%. To improve biocatalytic efficiency by strengthening the mass-transfer rate, natural deep-eutectic solvents, surfactants and cyclodextrins (CDs) were introduced separately in the reaction system as cosolvent. Among them, L-carnitine: lysine (C: Lys, molar ratio 1:2), Tween 20 and γ-CD manifested higher (R)-BPFL yield compared with other same kind of cosolvents. Furthermore, based on the excellent performance of both Tween 20 and C: Lys (1:2) in enhancing BPFO solubility and ameliorating cell permeability, a Tween 20/C: Lys (1:2)-containing integrated reaction system was then established for efficient bioproduction of (R)-BPFL. After optimizing the critical factors involved in BPFO bioreduction in this synergistic reaction system, BPFO loading increased up to 45 mM and the yield reached 90.0% within 9 h, comparatively only 37.6% yield was acquired in neat aqueous buffer. This is the first report on K. radicincitans cells as new biocatalyst applied in (R)-BPFL preparation, and the developed Tween 20/C: Lys-containing synergistic reaction system has great potential for the synthesis of various chiral alcohols.

Upstream and Downstream Bioprocessing in Enzyme Technology

The development of biotransformation must integrate upstream and downstream processes. Upstream bioprocessing will influence downstream bioprocessing. It is essential to consider this because downstream processes can constitute the highest cost in bioprocessing. This review comprehensively overviews the most critical aspects of upstream and downstream bioprocessing in enzymatic biocatalysis. The main upstream processes discussed are enzyme production, enzyme immobilization methodologies, solvent selection, and statistical optimization methodologies. The main downstream processes reviewed in this work are biocatalyst recovery and product separation and purification. The correct selection and combination of upstream and downstream methodologies will allow the development of a sustainable and highly productive system.

Challenging DESs and ILs in the valorization of food waste: a case study

In this study, the efficacy of two of the best performing green solvents for the fractionation of lignocellulosic biomass, cholinium arginate (ChArg) as biobased ionic liquid (Bio-IL) and ChCl:lactic acid (ChCl:LA, 1:10) as natural deep eutectic solvent (NADES), was investigated and compared in the pretreatment of an agri-food industry waste, apple fibers (90°C for 1 h). For the sake of comparison, 1-butyl-3-methylimidazolium acetate (BMIM OAc) as one of the best IL able to dissolve cellulose was also used. After the pretreatment, two fractions were obtained in each case. The results gathered through FTIR and TG analyses of the two materials and the subsequent DNS assay performed after enzymatic treatment led to identify ChArg as the best medium to delignify and remove waxes, present on the starting apple fibers, thus producing a material substantially enriched in cellulose (CRM). Conversely, ChCl:LA did not provide satisfactorily results using these mild conditions, while BMIM OAc showed intermediate performance probably on account of the reduced crystallinity of cellulose after the dissolution-regeneration process. To corroborate the obtained data, FTIR and TG analyses were also performed on the residues collected after the enzymatic hydrolysis. At the end of the pretreatment, ChArg was also quantitatively recovered without significant alterations.

A Mild, Efficient and Sustainable Tetrahydropyranylation of Alcohols Promoted by Acidic Natural Deep Eutectic Solvents

A straightforward protocol to promote the tetrahydropyranylation of alcohols, using for the first time bioinspired acidic natural deep eutectic solvents (NADESs) as non-innocent reaction media under mild reaction conditions, was reported. This approach enables the preparation of several tetrahydropyranyl (THP) ethers starting from primary, secondary and tertiary alcohols in short reaction times and with high levels of chemoselectivity, working under air and without the need of additional catalyst. The sustainability of the methodology was further highlighted by its scalability and the easy recyclability of the NADES, allowing multigram preparations of THP ethers without any loss of the catalytic activity of the reaction media up to ten recycling steps. Telescoped, one-pot tetrahydropyranylation/nucleophilic acyl substitution transformations using the same eutectic mixture were also demonstrated.

Lipase-mediated Baeyer-Villiger oxidation of benzylcyclopentanones in ester solvents and deep eutectic solvents

This work presents the chemo-enzymatic Baeyer-Villiger oxidation of α-benzylcyclopentanones in ester solvents as well as deep eutectic solvents (DES). In the first part of the work the effect of selected reaction conditions on the reaction rate was determined. The oxidation process was most effective in ethyl acetate at 55 °C, with the use of lipase B from Candida antarctica immobilized on acrylic resin and UHP as oxidant. Ultimately, these preliminary studies prompted the development of an effective method for the implementation of lipase-mediated Baeyer-Villiger oxidation of benzylcyclopentanones in DES. The highest conversion was indicated when the oxidizing agent was a component of DESs (minimal DESs). The fastest conversion of ketones to lactones was observed in a mixture of choline chloride with urea hydrogen peroxide. In this case, after 3 days, the conversion of the ketones to lactones products exceeded 92% for all substrates. As a result, two new lactones were obtained and fully characterized by spectroscopic data.

Optimization of Deep Eutectic Solvents Extraction of Effective Components from Phellodendron chinense Schneid by Response Surface Methodology

Taking Phellodendron chinense Schneid (PcS) as the raw material with ultrasonic-assisted eutectic solvent, the effects of various DESs on the extractable content of palmatine and berberine in PcS were investigated. On the basis of the single-factor test, the best DES was determined to be choline chloride and 1,3-propanediol (mole ratio 1 : 2). After optimizing by the response surface method, the optimum extraction conditions were as follows: the solid-liquid ratio was 1 : 30 (w/v), water content was 30% (v/v), vortex time was 7 min, ultrasonic time was 20 min, ultrasonic temperature was 60°C, ultrasonic power was 400 W, and the content of palmatine in PcS was 5.421 ± 0.283 mg/g, and the content of berberine in PcS was 15.573 ± 0.539 mg/g. Therefore, DES prepared from choline chloride and 1,3-propanediol can be used to extract palmatine and berberine from PcS. The optimized process conditions determined by the response surface method are reliable and can provide a reference for the green extraction of effective components from PcS.

Promising Technological and Industrial Applications of Deep Eutectic Systems

Deep Eutectic Systems (DESs) are obtained by combining Hydrogen Bond Acceptors (HBAs) and Hydrogen Bond Donors (HBDs) in specific molar ratios. Since their first appearance in the literature in 2003, they have shown a wide range of applications, ranging from the selective extraction of biomass or metals to medicine, as well as from pollution control systems to catalytic active solvents and co-solvents. The very peculiar physical properties of DESs, such as the elevated density and viscosity, reduced conductivity, improved solvent ability and a peculiar optical behavior, can be exploited for engineering modular systems which cannot be obtained with other non-eutectic mixtures. In the present review, selected DESs research fields, as their use in materials synthesis, as solvents for volatile organic compounds, as ingredients in pharmaceutical formulations and as active solvents and cosolvents in organic synthesis, are reported and discussed in terms of application and future perspectives.