Phase transfer catalyzed heterogeneous N-deacetylation of chitin in alkaline solution

Mechanism of Heterogeneous Alkaline Deacetylation of Chitin: A Review

This review provides an analysis of experimental results on the study of alkaline heterogeneous deacetylation of chitin obtained by the authors and also published in the literature. A detailed analysis of the reaction kinetics was carried out considering the influence of numerous factors: reaction reversibility, crystallinity and porosity of chitin, changes in chitin morphology during washing, alkali concentration, diffusion of hydroxide ions, and hydration of reacting particles. A mechanism for the chitin deacetylation reaction is proposed, taking into account its kinetic features in which the decisive role is assigned to the effects of hydration. It has been shown that the rate of chitin deacetylation increases with a decrease in the degree of hydration of hydroxide ions in a concentrated alkali solution. When the alkali concentration is less than the limit of complete hydration, the reaction practically does not occur. Hypotheses have been put forward to explain the decrease in the rate of the reaction in the second flat portion of the kinetic curve. The first hypothesis is the formation of “free” water, leading to the hydration of chitin molecules and a decrease in the reaction rate. The second hypothesis postulates the formation of a stable amide anion of chitosan, which prevents the nucleophilic attack of the chitin macromolecule by hydroxide ions.

Zr4+ and glutaraldehyde cross-linked polyethyleneimine functionalized chitosan composite: Synthesis, characterization, Cr(VI) adsorption performance, mechanism and regeneration

In order to improve the stability, electrostatic interaction and ion exchange ability of chitosan for Cr (VI) removal, it is an effective strategy to introduce polyvalent metal ions and polymers into chitosan molecular chain through crosslinking. In this paper, Zr⁴⁺ and glutaraldehyde crosslinked polyethyleneimine functionalized chitosan (CGPZ) composite was successfully synthesized and characterized by XRD, SEM, FTIR, BET, and XPS. The results showed that polyethyleneimine was successfully grafted onto chitosan by Schiff base reaction, while the appearance of ZrO and ZrN bonds verified the successful preparation of CGPZ. The monolayer maximum adsorption capacity of Cr(VI) by CGPZ was 593.72 mg g^-1 at 298 K and t = 210 min. The removal efficiency of 100 mg L^-1 Cr(VI) reached 95.7 %. The thermodynamic, isotherm and kinetic results show that the adsorption process of Cr (VI) by CGPZ is a spontaneous endothermic process controlled by entropy, which accords with Freundlich model and pseudo-second-order kinetic model. The regeneration experiments show that both HCl and NaOH can effectively desorb Cr(III) and Cr(VI) from the adsorbent surface, and the adsorbent has good acid-base resistance and regeneration performance. The removal of Cr(VI) mainly involves electrostatic attraction, ion exchange, reduction and complexation. CGPZ can synergistically adsorb Cr(VI) by electrostatic interaction of -NH₂/-C=N and ion exchange of Cl^- ion in the center of Zr, then reduce Cr(VI) to Cr(III) (45.4 % at pH = 2.0) by the -OH group on its surface, and chelate Cr(III) through COO- and -NH- groups.

Effect of diffusional limitations on the kinetics of deacetylation of chitin/chitosan

A new model is proposed for the kinetics of the heterogeneous deacetylation of chitin/chitosan. This new model is able to represent the process over much broader ranges than the other kinetic models reported in the literature. The unreacted shrinking core model was modified with the inclusion of increasing diffusional effects as the reaction progresses, causing the rate to slow down and preventing the degree of deacetylation reaching 100 %, even in the presence of excess NaOH. The model was validated with data collected in experiments with different NaOH concentrations and temperatures. The proposed model was able to represent the experimental data correctly over the entire experiment span, resulting in a model with proven predictive ability, in contrast to existing kinetic models that have been applied in a piecewise fashion over a rather limited time range of the process. The proposed model represents an improvement in the understanding of the deacetylation process.

The physicochemical properties of chitosan prepared by microwave heating

The aim of this study was to compare the physicochemical properties of chitosan prepared by microwave and water bath heating with an equivalent quantity of heat intake. The structure and physicochemical properties of the chitosan obtained by these two methods were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), gel permeation chromatography (GPC), and scanning electron microscopy (SEM). The FTIR and XRD patterns show that there was no significant difference in the structure of chitosan produced by the two heat sources. The results showed that chitosan with 73.86% deacetylation was successfully prepared by microwave heating within 60 min, while a longer time of 180 min was required for the preparation of chitosan with the same deacetylation degree (74.47%) using the conventional heating method under the same heating rate. Even under the same temperature conditions, microwave technology can greatly reduce the reaction time by approximately 1/3, while the chitosan produced by microwaves can obtain relatively low molecular weight and viscosity. These results showed that microwaves may efficiently promote complete chemical reactions by the friction heating mechanism generated by molecular vibration beyond a rapid heating source, turning into a more efficient, energy-saving, and environmentally friendly method for the further use of rigid shrimp shells and highly crystalline crustacean materials.

Heavy metal ions removal from aqueous solution by xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles

Xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles (XCMCP) were synthesized and applied to remove Pb(ii) and Cu(ii) ions from aqueous solutions.

Preparation of cross-linked magnetic chitosan-phenylthiourea resin for adsorption of Hg(II), Cd(II) and Zn(II) ions from aqueous solutions

In this study, cross-linked magnetic chitosan-phenylthiourea (CSTU) resin were prepared and characterized by means of FTIR, (1)H NMR, SEM high-angle X-ray diffraction (XRD), magnetic properties and thermogravimetric analysis (TGA). The prepared resin were used to investigate the adsorption properties of Hg(II), Cd(II) and Zn(II) metal ions in an aqueous solution. The extent of adsorption was investigated as a function of pH and the metal ion removal reached maximum at pH 5.0. Also, the kinetic and thermodynamic parameters of the adsorption process were estimated. These data indicated that the adsorption process is exothermic and followed the pseudo-second-order kinetics. Equilibrium studies showed that the data of Hg(II), Cd(II) and Zn(II) adsorption followed the Langmuir model. The maximum adsorption capacities for Hg(II), Cd(II) and Zn(II) were estimated to be 135 ± 3, 120 ± 1 and 52 ± 1 mg/g, which demonstrated the high adsorption efficiency of CSTU toward the studied metal ions.

Adsorption of Cu(II), Co(II), and Ni(II) ions by modified magnetic chitosan chelating resin

Cross-linked magnetic chitosan-isatin Schiff's base resin (CSIS) was prepared for adsorption of metal ions. CSIS obtained was investigated by means of FTIR, (1)H NMR, wide-angle X-ray diffraction (WAXRD), magnetic properties and thermogravimetric analysis (TGA). The adsorption properties of cross-linked magnetic CSIS resin toward Cu(2+), Co(2+) and Ni(2+) ions were evaluated. Various factors affecting the uptake behavior such as contact time, temperature, pH and initial concentration of the metal ions were investigated. The kinetic parameters were evaluated utilizing the pseudo-first-order and pseudo-second-order. The equilibrium data were analyzed using the Langmuir, Freundlich, and Tempkin isotherm models. The adsorption kinetics followed the mechanism of the pseudo-second-order equation for all systems studied, evidencing chemical sorption as the rate-limiting step of adsorption mechanism and not involving a mass transfer in solution. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the maximum adsorption capacities were 103.16, 53.51, and 40.15mg/g for Cu(2+), Co(2+) and Ni(2+) ions, respectively. Cross-linked magnetic CSIS displayed higher adsorption capacity for Cu(2+) in all pH ranges studied. The adsorption capacity of the metal ions decreased with increasing temperature. The metal ion-loaded cross-linked magnetic CSIS were regenerated with an efficiency of greater than 88% using 0.01-0.1M ethylendiamine tetraacetic acid (EDTA).