Tailoring polyvinyl alcohol with triazinanes and formaldehyde

Biodegradable Films Prepared from Pulp Lignocellulose Adhesives of Urea Formaldehyde Resin Modified by Biosulfonate

Traditional low-density polyethylene (LDPE) film causes environmental pollution; there is a pressing need to make new bio-based polymers for alternative products, to meet agricultural production needs and for sustainable ecological development. In this study, urea-formaldehyde resin (UF) was modified with polyvinyl alcohol (PVA) and 1-2.5% bio-based sulfonate (BBS). The influence of BBS inducing on the functional groups, microstructure, and thermal behavior was evaluated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). A biodegradable film was prepared with modified UF resin as adhesive and pulp lignocellulose as raw material. The biodegradable mulch film samples were tested for biodegradability, water retention, and cooling soil temperature characters using LDPE and no mulching (NM) as a control. The results showed that with the increase of BBS content, the viscosity and reactivity of modified PUF resin increased, and the free formaldehyde content decreased. A 2%BBS modified PUF resin (2.0BBS/PUF) accelerated the curing process of the PUF resin, formed a flexible macromolecular network structure, and enhanced the toughness of the resin. The biodegradable mulch prepared with PUF, BBS, and 2.0BBS/PUF as adhesives had good water retention. BBS modification increased the degradation rate of mulch by 17.53% compared to the PUF. Three biodegradable films compared with LDPE and NM significantly reduced the soil temperature under summer cucumber cultivation, and the 2.0BBS/PUF coating had the lowest diurnal temperature difference, which provided a suitable soil environment for crop growth.

One-Pot Synthesis of Amide-Functional Main-Chain Polybenzoxazine Precursors

Main-chain polybenzoxazines containing amide linkages were successfully prepared in one pot. Three different polymers were synthesized by reacting 3,4-dihydrocoumarine (DHC) and paraformaldehyde with 1,3-diaminopropane or 1,6-diaminohexane or Jeffamine ED-900. The one-pot reaction proceeded through the combination of the ring-opening of DHC with amines, and subsequent Mannich and ring-closure reactions occurring in a cascading manner. The obtained polymer from Jeffamine exhibited good film-forming properties, and free-standing flexible films were easily solvent- casted on Teflon plates. All polymeric precursors were characterized by spectroscopic analysis, and their curing behavior and thermal stability were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).

Coumarines as masked phenols for amide functional benzoxazines

Benzoxazines with amide linkages were successfully prepared from 3,4-dihydrocoumarine using either one-pot or stepwise pathways.

Combining polybenzoxazines and polybutadienes via simultaneous inverse and direct vulcanization for flexible and recyclable thermosets by polysulfide dynamic bonding

Simultaneous inverse and direct vulcanization of a benzoxazine and a polybutadiene gave recyclable films through dynamic S–S bonding.

Hexagonal Boron Nitride/Microfibril Cellulose/Poly(vinyl alcohol) Ternary Composite Film with Thermal Conductivity and Flexibility

Microfibril cellulose (MFC), which is detrimental to soil cultivation and environmental protection, is derived from waste pineapple leaves. Hexagonal boron nitride (h-BN) was modified with polydopamine (PDA)-PDA@h-BN named pBN, and then combined with MFC to prepare a novel hybrid powder. The effect of PDA on h-BN and the binding effect between pBN and MFC were characterized by X-ray photoelectron spectroscopy (XPS), Thermogravimetric (TG), scanning electron microscopy (SEM), and Fourier Transform-Infrared (FT-IR). Poly (vinyl alcohol) (PVA) was used as an eco-friendly polymeric matrix to prepare a pBN-MFC-PVA composite film. The mechanical strength, hydrophobicity, and thermal conductivity of the film were studied and the results confirmed that h-BN was chemically modified with PDA and was uniformly distributed along the MFC. The thermal conductivity of the pBN-MFC-PVA composite film increased with the addition of a pBN-MFC novel powder. MFC acted as "guides" to mitigate the h-BN agglomerate. In addition to the possible usage in the pBN-MFC-PVA composite film itself, the pBN-MFC hybrid powder may be a potential filler candidate for manufacturing thermal interface materials and wearable devices or protective materials.

Combining benzoxazine and ketene chemistries for self-healing of high performance thermoset surfaces

The use of oxoketene chemistry for self-healable polybenzoxazines is described.