An amplified chemiluminescence system based on Si-doped carbon dots for detection of catecholamines

Recent Advances in Catecholamines Analytical Detection Methods and Their Pretreatment Technologies

Catecholamines (CAs), including adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that play a critical role in regulating the cardiovascular system, metabolism, and stress response in the human body. As promising methods for real-time monitoring of catecholamine neurotransmitters, LC-MS detectors have gained widespread acceptance and shown significant progress over the past few years. Other detection methods such as fluorescence detection, colorimetric assays, surface-enhanced Raman spectroscopy, and surface plasmon resonance spectroscopy have also been developed to varying degrees. In addition, efficient pretreatment technology for CAs is flourishing due to the increasing development of many highly selective and recoverable materials. There are a few articles that provide an overview of electrochemical detection and efficient enrichment, but a comprehensive summary focusing on analytical detection technology is lacking. Thus, this review provides a comprehensive summary of recent analytical detection technology research on CAs published between 2017 and 2022. The advantages and limitations of relevant methods including efficient pretreatment technologies for biological matrices and analytical methods used in combination with pretreatment technology have been discussed. Overall, this review article provides a better understanding of the importance of accurate CAs measurement and offers perspectives on the development of novel methods for disease diagnosis and research in this field.

Antibacterial Carbon Dots-Based Composites

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Halogen-Doped Carbon Dots: Synthesis, Application, and Prospects

Carbon dots (CDs) have many advantages, such as tunable photoluminescence, large two-photon absorption cross-sections, easy functionalization, low toxicity, chemical inertness, good dispersion, and biocompatibility. Halogen doping further improves the optical and physicochemical properties of CDs, extending their applications in fluorescence sensors, biomedicine, photocatalysis, anti-counterfeiting encryption, and light-emitting diodes. This review briefly describes the preparation of CDs via the “top-down” and “bottom-up” approaches and discusses the preparation methods and applications of halogen (fluorine, chlorine, bromine, and iodine)-doped CDs. The main challenges of CDs in the future are the elucidation of the luminescence mechanism, fine doping with elements (proportion, position, etc.), and their incorporation in practical devices.

Smartphone-Based Techniques Using Carbon Dot Nanomaterials for Food Safety Analysis

The development of portable and efficient nanoprobes to realize the quantitative/qualitative onsite determination of food pollutants is of immense importance for safeguarding human health and food safety. With the advent of the smartphone, the digital imaging property causes it to be an ideal diagnostic substrate to point-of-care analysis probes. Besides, merging the versatility of carbon dots nanostructures and bioreceptor abilities has opened an innovative assortment of construction blocks to design advanced nanoprobes or improving those existing ones. On this ground, massive endeavors have been made to combine mobile phones with smart nanomaterials to produce portable (bio)sensors in a reliable, low cost, rapid, and even facile-to-implement area with inadequate resources. Herein, this work outlines the latest advancement of carbon dots nanostructures on smartphone for onsite detecting of agri-food pollutants. Particularly, we afford a summary of numerous approaches applied for target molecule diagnosis (pesticides, mycotoxins, pathogens, antibiotics, and metal ions), for instance microscopic imaging, fluorescence, colorimetric, and electrochemical techniques. Authors tried to list those scaffolds that are well-recognized in complex media or those using novel constructions/techniques. Lastly, we also point out some challenges and appealing prospects related to the enhancement of high-efficiency smartphone based carbon dots systems.

Carbon dot composites for bioapplications: a review

Recent advancements in the synthesis of carbon dot composites and their applications in biomedical fields (bioimaging, drug delivery and biosensing) have been carefully summarized. The current challenges and future trends of CD composites in this field have also been discussed.

“Turn on” Fluorescence Sensor of Glutathione Based on Inner Filter Effect of Co-Doped Carbon Dot/Gold Nanoparticle Composites

Glutathione (GSH) is a thiol that plays a significant role in nutrient metabolism, antioxidant defense and the regulation of cellular events. GSH deficiency is related to variety of diseases, so it is useful to develop novel approaches for GSH evaluation and detection. In this study we used nitrogen and phosphorus co-doped carbon dot-gold nanoparticle (NPCD–AuNP) composites to fabricate a simple and selective fluorescence sensor for GSH detection. We employed the reductant potential of the nitrogen and phosphorus co-doped carbon dots (NPCDs) themselves to form AuNPs, and subsequently NPCD–AuNP composites from Au3+. The composites were characterized by using a range of spectroscopic and electron microscopic techniques, including electrophoretic light scattering and X-ray diffraction. The overlap of the fluorescence emission spectrum of NPCDs and the absorption spectrum of AuNPs resulted in an effective inner filter effect (IFE) in the composite material, leading to a quenching of the fluorescence intensity. In the presence of GSH, the fluorescence intensity of the composite was recovered, which increased proportionally to increasing the GSH concentration. In addition, our GSH sensing method showed good selectivity and sensing potential in human serum with a limit of detection of 0.1 µM and acceptable results.

A Simple and Novel Sensor for the Determination of Acetamiprid Based on Its Reducing Effect on the Chemiluminescence of S, N-CQDs in CH3CN-H2O2 System

A simple and novel method for the determination of acetamiprid in water samples is suggested. The method is based on the reducing effect of acetamiprid on the chemiluminescence intensity of new sulfur and nitrogen co-doped carbon dots (S, N-CQDs) in an acetonitrile-hydrogen peroxide (CH₃CN-H₂O₂) system. The possible mechanism was investigated, and it was found that S, N-CQDs react with (¹O₂)₂*, produced from the CH₃CN-H₂O₂ reaction, leading to excited state S, N-CQDs, which deactivate to the ground state by photon emission. Acetamiprid diminishes the chemiluminescence (CL) intensity by competing with S, N-CQDs. The CL intensity reduction is proportional to the concentration of acetamiprid. S, N-CQDs were easily prepared by a hydrothermal method. Under the optimal conditions, a linear range of 2.5 - 25.0 μg L^-1 with a detection limit (3σ) of 0.4 μg L^-1 was obtained. This method was successfully applied to the determination of trace amounts of residual pesticides in water samples.

Green synthesis of white light emitting carbon quantum dots: Fabrication of white fluorescent film and optical sensor applications

In this work, we have reported on the facile synthesis of white light-emitting carbon quantum dots (CQD) from corncob by hydrothermal method. This CQD has a broad emission from 380 nm to 650 nm with high photoluminescence intensity even after three months of shelf-life and stable at variable pH conditions. The presence of Si and N impurities in the biomass gives a greater advantage in producing white light emission with high quantum yield (54%) and enhanced lifetime at ambient conditions. The CQD is highly sensitive towards DNA, paracetamol, Pb²⁺, Cu²⁺, Fe³⁺, and Cr³⁺ fluorescence sensing and signifies its application as a multi-modal fluorescence sensor. The results of optical sensitivity calculated from the linear range of 1-10 ng/mL, 0.10-0.30 mg/mL, 2.5446 ng/mL, 0.0694 mg/mL, 0.3103-1.5515 μM/mL, 0.4299-4.7293 μM/mL, 1.3010 μM/mL and 0.05-2.5 μM/mL. The limit of detection is 2.5446 ng/mL, 0.0694 mg/mL, 0.8641 μM/mL, 1.2454 μM/mL, 1.3010 μM/m, 0.8550 μM/mL and 2.8562 μM/mL, respectively. And also, the relative standard deviation values of 2.30%, 4.46%, 1.79%, 1.84%, 0.26%, 1.23% and 0.35% are evidences its possibility of development towards potential optical sensor applications. Flexible white light-emitting sheets were fabricated from the CQD, illuminates uniform brightness, and has good color reproducibility and higher stability under various UV light excitation.

Doped-carbon dots: Recent advances in their biosensing, bioimaging and therapy applications

As a fascinating class of fluorescent carbon dots (CDs), doped-CDs are now sparked intense research interest, particularly in the diverse fields of biomedical applications due to their unique advantages, including low toxicity, physicochemical, photostability, excellent biocompatibility, and so on. In this review, we have summarized the most recent developments in the literature regarding the employment of doped-CDs for pharmaceutical and medical applications, which are published over approximately the past five years. Accordingly, we discuss the toxicity and optical properties of these nanomaterials. Beyond the presentation of successful examples of the application of these multifunctional nanoparticles in photothermal therapy, photodynamic therapy, and antibacterial activity, we further highlight their application in the cellular labeling, dual imaging, and in vitro and in vivo bioimaging by use of fluorescent-, photoacoustic-, magnetic-, and computed tomography (CT)-imaging. The potency of doped-CDs was also described in the biosensing of ions, small molecules, and drugs in biological samples or inside the cells. Finally, the advantages, disadvantages, and common limitations of doped-CD technologies are reviewed, along with the future prospects in biomedical research. Therefore, this review provides a concise insight into the current developments and challenges in the field of doped-CDs, especially for biological and biomedical researchers.

Carbon Dots: An Emerging Smart Material for Analytical Applications

Carbon dots (CDs) are optically active carbon-based nanomaterials. These nanomaterials can change their light emission properties in response to various external stimuli such as pH, temperature, pressure, and light. The CD's remarkable stimuli-responsive smart material properties have recently stimulated massive research interest for their exploitation to develop various sensor platforms. Herein, an effort has been made to review the major advances made on CDs, focusing mainly on its smart material attributes and linked applications. Since the CD's material properties are largely linked to their synthesis approaches, various synthesis methods, including surface passivation and functionalization of CDs and the mechanisms reported so far in their photophysical properties, are also delineated in this review. Finally, the challenges of using CDs and the scope for their further improvement as an optical signal transducer to expand their application horizon for developing analytical platforms have been discussed.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Label-free silver triangular nanoplates for spectrophotometric determination of catecholamines and their metabolites

A novel method towards spectrophotometric determination of catecholamines and their metabolites differing in their functional groups has been developed. This method is based on a change in morphology of silver triangular nanoplates upon the action of cateсholamines and their metabolites, which is manifested by the decrease of the nanoparticle local surface plasmon resonance (LSPR) band intensity or its shift to the short-wavelength region of the spectrum. The shift value of the LSPR band or the change of its intensity increases with increasing concentration of catecholamines or their metabolites, which is proposed for their spectrophotometric determination. The limits of detection of catecholamines and their metabolites under selected conditions increase in the series homovanillic acid < vanillylmandelic acid < L-epinephrine < L-norepinephrine < dopamine and are 0.25, 1.2, 3.0, 64, and 130 μmol L^-1, respectively. The selectivity of the proposed method was assessed using vanillylmandelic acid as example. It was found that the determination of vanillylmandelic acid does is not interfered in the presence of 4000-fold excess of Na⁺, K⁺, CH₃COO^-, and 1000-fold excess of Mg²⁺, Ca²⁺, Al³⁺, NO₃^-. The method also allows for the selective determination of vanillylmandelic acid in the presence of a 1000-fold excess of structurally related substances that do not contain either a catechol fragment or an electron donor substituent. The proposed approach was successfully applied to the determination of catecholamines in pharmaceuticals and artificial urine. Graphical abstract.

Detection of Ferric Ions and Catecholamine Neurotransmitters via Highly Fluorescent Heteroatom Co-Doped Carbon Dots

Carbon dots (CDs) demonstrate very poor fluorescence quantum yield (QY). In this study, with the help of a hydrothermal method, we combined CDs with nitrogen and phosphorus elements belonging to the VA group (in the periodic table) to form heteroatom co-doped CDs, i.e., nitrogen and phosphorus co-doped carbon dots (NPCDs). These displayed a significant improvement in the QY (up to 84%), which was as much as four times than that of CDs synthesized by the same method. The as-prepared NPCDs could be used as an "off-on" fluorescence detector for the rapid and effective sensing of ferric ions (Fe3+) and catecholamine neurotransmitters (CNs) such as dopamine (DA), adrenaline (AD), and noradrenaline (NAD). The fluorescence of NPCDs was "turned off" and the emission wavelength was slightly red-shifted upon increasing the Fe3+ concentration. However, when CNs were incorporated, the fluorescence of NPCDs was recovered in a short response time; this indicated that CN concentration could be monitored, relying on enhancing the fluorescence signal of NPCDs. As a result, NPCDs are considered as a potential fluorescent bi-sensor for Fe3+ and CN detection. Particularly, in this research, we selected DA as the representative neurotransmitter of the CN group along with Fe3+ to study the sensing system based on NPCDs. The results exhibited good linear ranges with a limit of detection (LOD) of 0.2 and 0.1 µM for Fe3+ and DA, respectively.

Advances in chemiluminescence and electrogenerated chemiluminescence based on silicon nanomaterials

Since 1950, when chemiluminescence (CL) of siloxane upon treatment with strong oxidants was discovered by Kurtz, many silicon-based nanomaterials with different elements, specific molecules, shapes and sizes have been developed as light emitters, energy acceptors, and catalyzers to provide valuable CL and electrogenerated CL (ECL) detection platforms in analytical chemistry fields. This review mainly focuses on the recent development of their mechanisms and sensing methodologies for small molecules, free radicals, ion, enzyme, protein, DNA, cancer cells, and metabolites based on specific reactions such as aptamer sensing and enzymatic reaction. Additionally, the future trend is discussed.

Fluorescent carbon dots functionalization

Carbon dots (CDs), as a new type of luminescent zero-dimensional carbon nanomaterial, have been applied in a variety of fields. Currently, functionalization of CDs is an extremely useful method for effectively tuning their intrinsic structure and surface state. Heteroatom doping and surface modification are two functionalization strategies for improving the photophysical performance and broadening the range of applications for fluorescent CDs. Heteroatom doping in CDs can be used to tune their intrinsic properties, which has received significant research interests because of its simplicity. Surface modification can be applied for varying active sites and the functional groups on the CDs surface, which can endow fluorescent CDs with the unique properties resulting from functional ligand. In this review, we summarize the structural and physicochemical properties of functional CDs. We focused our review on the latest developments in functionalization strategies for CDs and discuss the detailed characteristics of different functionalization methods. Ultimately, we hope to inform researchers on the latest progress in functionalization of CDs and provide perspectives on future developments for functionalization of CDs and their potential applications.

Fluorescent boron and nitrogen co-doped carbon dots with high quantum yield for the detection of nimesulide and fluorescence staining

In this work, we firstly developed a new rapid detection method of nimesulide (Nim) based on the boron and nitrogen co-doped carbon dots (B,N-CDs) as the fluorescence probe. The B,N-CDs were prepared by a facile hydrothermal treatment using ammonium citrate and bis(pinacolato)diboron as precursors. The as-prepared B,N-CDs were mono-dispersed with an average diameter of 3.3 nm, and exhibited good stability and strong fluorescence emission with a high quantum yield of 68.89%. The fluorescence of B,N-CDs was obviously quenched with the addition of Nim. A good linear relationship between ln (F₀/F) and the concentration of Nim was obtained in the range of 0-100 μM, and the limit of detection was 125 nM. Furthermore, the proposed analysis method was successfully applied for the detection of Nim in pharmaceutical samples and recoveries ranged from 94.60%-96.73%. More remarkably, it was further found that the as-prepared B,N-CDs displayed bright blue solid-state fluorescence, exhibiting potential application in invisible fluorescent ink for anti-counterfeiting and fluorescent dye.

Chemiluminometric fingerprints for identification of plasmonic nanoparticles

Development of a convenient and inexpensive method for identification and detection of nanoparticles (NPs) is of great interest. In this work, we have developed a novel and simple chemiluminescence based sensor array, with its sensing mechanism mimicking that of olfactory and gustatory systems for discriminating a set of NPs. The proposed method is based on the enhancement effect of NPs on luminol-oxidant CL intensity by their catalytic effect. Three kinds of oxidant including H₂O₂, AgNO₃, and K₃Fe(CN)₆ were used as sensor elements and NPs exhibited diverse enhancing responses to different oxidant-luminol CL systems producing unique response patterns that were identified through heat map and chemometric methods, including linear discriminant analysis (LDA) and hierarchical cluster analysis (HCA). Five NPs have been well distinguished at various concentrations. In addition, this method clearly revealed a linear relationship between CL signal values and the concentrations of NPs for the quantitative detection of NPs. We believe that this type of CL sensor array can open a new way for facile discrimination and detection of different kinds of NPs.

Silicon doped graphene quantum dots combined with ruthenium(iii) ions as a fluorescent probe for turn-on detection of triclosan

In this work, silicon doped graphene quantum dots (Si-GQDs) were prepared and applied for the sensitive and selective fluorescence detection of triclosan (TCS) in combination with Ru³⁺ ions.