A smartphone-combined ratiometric fluorescence probe for specifically and visibly detecting cephalexin

Block copolymer-derived recessed nanodisk-array electrodes for electrochemical detection of β-lactam antibiotics

Antimicrobial resistance (AMR) is one of the major socio-economic factors contributing to public health. β-lactams are most commonly prescribed drugs for variety of bacterial infections. Frequent use of antibiotics leads to AMR in humans and animals. The present work is focused on developing an electro-immunosensor to control and regulate the excessive use of antibiotics in animal-based food products. An amphiphilic block co-polymer poly(ethylene oxide-block-methyl methacrylate)(PEO-b-PMMA) was used to fabricate recessed nano-disk array electrode (RNE) and immobilized with Pen-Ab and Cef-Ab antibodies. The Limit of detection (LOD) of RNE working electrode was found to be 14.8 pM for penicillin and 13.8 pM for cefalexin with good selectivity in presence of non-specific antibiotics. Fabricated RNE electrode could detect trace amounts of spiked antigen in real samples of milk, egg and meat extract. Further, mesoporous thin film and microarrays can eventually be used to develop point-of-care diagnosis of antibiotics in animal-based food products.

A smartphone-based fluorescent sensor for rapid detection of multiple pathogenic bacteria

In this study, we developed a fluorescent sensor for the sensitive detection of multiple pathogenic bacteria based on magnetic separation, fluorescent probes, and smartphone image processing. A microchannel device was assembled using high-transparency resin and 3D printing technology. This device was combined with a smartphone and an external lens to develop a fluorescent sensor for autonomous detection of multiple pathogenic bacteria. Three fluorescence probes with different fluorescence were synthesized from highly specific aptamers and tetraphenylethylene derivatives. These fluorescent probes can make Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa emit different colors of fluorescence. Using the enrichment performance of molecularly imprinted materials, separation and detection of bacteria can be achieved simultaneously. Finally, with the Red-Green-Blue (RGB) analysis functionality of a smartphone, real-time field detection was realized with a sensitivity of 102 CFU/mL and a detection time of 40 min. This work provides a simple, inexpensive, and real-time sensor for the detection of multiple pathogens in medical diagnostics, food testing, and environmental analyses.

Recent Advances in Fluorescent Nanoprobes for Food Safety Detection

Fluorescent nanoprobes show similar fluorescence properties to traditional organic dyes, but the addition of nanotechnology accurately controls the size, shape, chemical composition, and surface chemistry of the nanoprobes with unique characteristics and properties, such as bright luminescence, high photostability, and strong biocompatibility. For example, modifying aptamers or antibodies on a fluorescent nanoprobe provides high selectivity and specificity for different objects to be tested. Fluorescence intensity, life, and other parameters of targets can be changed by different sensing mechanisms based on the unique structural and optical characteristics of fluorescent nanoprobes. What's more, the detection of fluorescent nanoprobes is cost-saving, simple, and offers great advantages in rapid food detection. Sensing mechanisms of fluorescent nanoprobes were introduced in this paper, focusing on the application progress in pesticide residues, veterinary drug residues, heavy metals, microbes, mycotoxins, and other substances in food safety detection in recent years. A brief outlook for future development was provided as well.

Ratiometric fluorescence probe integrated with smartphone for visually detecting lipopolysaccharide

A portable instrument-free detection method for lipopolysaccharide (LPS) analysis was developed based on dual-emission ratiometric fluorescence sensing system. Herein, red-emitting Au nanoclusters (Au NCs) were as reference probe, while blue-emitting fluorescent silica quantum dots (Si QDs) were as response probe. Additionally, the aptamer of LPS was covalently grafted to the surface of Si QDs in order to specific recognize the LPS. According to the changes of fluorescence intensityratio (FL ratio, I_{461 nm}/I_{643 nm}) with the concentrations of LPS, the linear equation was fitted with the range of 50-3000 ng/mL, and the limit of detection (LOD) was 29.3 ng/mL. As a practical application, this method was employed to analyze LPS in normal saline with the recovery rate of 97.7-103.8 %. The color picker platform in the smartphone was used to transform the detection picture to the process of Red, Green and Blue (RGB) for visual detection of LPS. The low-cost and easy-carry method reported here presents broad merits for the visually quantitative detection of LPS.

A novel peptide-based relay fluorescent probe with a large Stokes shift for detection of Hg2+ and S2- in 100 % aqueous medium and living cells: Visual detection via test strips and smartphone

Herein, a novel relay peptide-based fluorescent probe DGRK was synthesized via solid phase peptide synthesis (SPPS) technology. DGRK exhibited excellent water-solubility, good stability, remarkably large Stokes shift (230 nm) and high selectivity response to Hg²⁺ with a non-fluorescence complex DGRK-Hg²⁺ formation via a 1:1 binding mode. Further studies indicated that the DGRK-Hg²⁺ complex could act as a secondary probe for rapidly and sequentially detecting S^2- based on fluorescent "off-on" response, and without interference from a range of anions. The limit of detection (LOD) for Hg²⁺ and S^2- were calculated to be 33.6 nM and 60.9 nM, respectively. In addition, The reversibility of interaction of confirmed that the continuous and reversible recognition behavior of Hg²⁺ and S^2- by the probe DGRK, and could be cycled more than 5 times. In addition, DGRK could be successfully applied to the fluorescence imaging of Hg²⁺ and S^2- in two living cells based on excellent cells permeability and low cytotoxicity. Meanwhile, DGRK was successfully used to create the low-cost and portable test strips for visual detection and rapid analysis under 365 nm UV lamp, and the test strips combined with a smartphone (RGB color) was successfully applied to the semi-quantitative analysis and monitoring of dynamic changes of Hg²⁺ levels.

Synthesis and application of novel N, Si-carbon dots for the ratiometric fluorescent monitoring of the antibiotic balofloxacin in tablets and serum

A ratiometric fluorescent probe with blue-emission fluorescence based on N, Si-doped carbon dots (N, Si-CDs) for the detection of balofloxacin (BLFX) was synthesized by simple one-pot hydrothermal carbonization using methotrexate and 3-aminopropyltriethoxysilane (APTES) as carbon materials. The obtained N, Si-CDs showed dual-emission band fluorescence characterization at 374 nm and 466 nm. Furthermore, the synthesized N, Si-CD probe exhibited evidence of ratiometric fluorescence emission characteristics (F₄₆₆/F₃₇₄) toward BLFX along with a decrease in fluorescence intensity at 374 nm and an increase in fluorescence intensity at 466 nm. Based on this probe, a highly sensitive and fast detection method for the analysis of BLFX has been established with a linear range of 1–60 μM and a low detection limit of 0.1874 μM, as well as a rapid response time of 5.0 s. The developed assay has also been successfully applied for the detection of BLFX in tablets and rat serum.

A ratiometric fluorescent probe with blue-emission fluorescence based on N, Si-doped carbon dots (N, Si-CDs) for the detection of balofloxacin (BLFX) was synthesized by a simple method.

A new NiS nanoparticles-enhanced chemiluminescence method for determination of cephalexin in the pharmaceuticals and spiked human serum

It is reported that NiS nanoparticles (NPs) can enhance the light emission from chemiluminescence (CL) reaction of luminol-O₂ (λ_max = 425 nm), remarkably. Additionally, it was shown that cephalexin (CEF) could further increase the intensity of light emitted from NiS NPs-luminol-O₂ CL reaction. Inspired in these findings, we intended to develop a new and straightforward CL method for the determination of CEF. A calibration graph over the range of 1.00 × 10^-6 - 4.00 × 10^-5 mol L^-1 was established. The limit of detection (LOD) of the CL method was 8.00 × 10^-7 mol L^-1 . The coefficient of variation (CV) of the CL methods was 2.20% (n = 6) for the measurement of 6.00 × 10^-6 mol L^-1 CEF. NiS NPs were produced by exploiting the precipitation method and identified by employing several spectroscopic approaches. The proposed CL method was successfully used to measure CEF in some pharmaceutical and spiked human serum. The chemical mechanism governing the CL reaction was briefly explained.

A Smartphone Optical Device for Point-of-Care Testing of Glucose and Cholesterol Using Ag NPs/UiO-66-NH2-Based Ratiometric Fluorescent Probe

Point-of-care testing (POCT) with the advantages of simplicity, rapidity, portability, and low-cost is of great importance to improve healthcare, especially in resource-limited settings and home healthcare settings. Moreover, it is a great challenge to quantitative POCT of multiplexed biomarkers within a single accessible assay but provides enhanced diagnostic accuracy and improved diagnostic efficiency. Herein, a smartphone optical device has been designed for POCT of glucose and cholesterol in metabolic syndrome patients using a ratiometric fluorescent sensor. The sensing system of Ag NPs/UiO-66-NH₂ and o-phenylenediamine presents a dual-emission response to H₂O₂ (the main product of glucose and cholesterol catalyzed by glucose oxidase and cholesterol oxidase) on account of the inner filter effect, resulting in an increase in the response of the fluorescence intensity ratio (F_555 nm/F_425 nm) accompanied by a distinguishable color transition from blue to yellow green. After compositing probes with a flexible substrate, the obtained test strip can be integrated with a smartphone-based portable platform to read RGB values for accurate testing of glucose and cholesterol with both detection limits of 10 μmol L^-1, which are hundreds of times lower than their concentrations in human serum. With the advantages of low-cost, ease of operation, and broad adaptability, this smartphone optical device holds great potential for portable detection of numerous targets in personalized healthcare and clinical diagnosis.

A ratiometric fluorescent probe based on carbon dots and gold nanocluster encapsulated metal-organic framework for detection of cephalexin residues in milk

Herein, we report a ratiometric fluorescent probe based on in situ incorporation of both Gold nanoclusters (AuNCs) and Green emitting carbon dots (gCDs) into zeolitic imidazolate framework-8 (ZIF-8) to analysis of Cephalexin (CFX). Under a single excitation wavelength of 400 nm, the sensor exhibits dual-emissions centered at 520 and 630 nm. The fluorescence of AuNCs (630 nm) is selectively quenched by CFX, whereas the fluorescence of gCDs (520 nm) remainsalmostconstant. The ratiometric fluorescence signal (F₅₂₀/F₆₃₀) of the prepared composite (gCDc/AuNCs @ ZIF-8) is linearly proportional to the concentration of CFX from 0.1 to 6 ng/mL with a low detection limit (LOD) of 0.04 ng/mL, which is below the maximum residues limit (MRL) of 100 ng/mL set by the Food and Drug Administration (FDA). Moreover, the designed sensing platform was successfully applied to detect CFX in the milk samples.

Ratiometric fluorescence and smartphone dual-mode detection of glutathione using carbon dots coupled with Ag+-triggered oxidation of o-phenylenediamine

Developing ratiometric fluorescence and smartphone dual-mode bioanalysis methods is important but challenging. A ratiometric fluorescence method for determining glutathione (GSH) using carbon dots (CDs) and Ag⁺-triggered o-phenylenediamine (OPD) oxidation is described here. Ag⁺oxidizes OPD to give 2,3-diaminophenazine (oxOPD), which effectively quenches CD fluorescence at 436 nm through the inner filter effect and causes a new emission peak at 561 nm. GSH chelates with Ag⁺and prevents the Ag⁺oxidizing OPD and therefore effectively preserves CD emission at 436 nm (blue) and allows only weak oxOPD fluorescence at 561 nm (orange) to occur. The oxOPD to CD fluorescence intensity ratio decreased linearly as the GSH concentration increased in the range 0-150 nM, and the detection limit was 15 nM. The ratiometric fluorescence probe lit with an ultraviolet lamp clearly changed color from orange to blue as the GSH concentration increased. An image was acquired using a smartphone camera and converted into digital values. The blue and red channel ratio was calculated and used to quantify GSH. The method therefore allows dual-mode detection of GSH.