Facile self-template fabrication of hierarchical nickel-cobalt phosphide hollow nanoflowers with enhanced hydrogen generation performance

Self-Etching Synthesis of Superhydrophilic Iron-Rich Defect Heterostructure-Integrated Catalyst with Fast Oxygen Evolution Kinetics for Large-Current Water Splitting

Developing catalysts with rich metal defects, strong hydrophilicity, and extensive grain boundaries is crucial for enhancing the kinetics of electrocatalytic water oxidation and facilitating large-current water splitting. In this study, we utilized pH-controlled etching and gas-phase phosphating to synthesize a flower-like Ni2P-FeP4-Cu3P modified nickel foam heterostructure catalyst. This catalyst features pronounced hydrophilicity and a high concentration of Fe defects. It exhibits low overpotentials of 156 mV and 210 mV at current densities of 10 and 100 mA cm-2 respectively, and maintains stability for up to 200 h at 100 mA cm-2 with only 7.3 % degradation, showcasing outstanding electrocatalytic water oxidation performance. Furthermore, when integrated into a Ni2P-FeP4-Cu3P/NF||Pt-C/NF electrolyzer, it achieves excellent overall water splitting performance, reaching current densities of 10 and 400 mA cm-2 at just 1.47 V and 1.73 V, respectively, and operates stably for 60 h at 500 mA cm-2 with minimal degradation. Analysis indicates that high-valence oxyhydroxides/phosphides of Ni, Fe, and Cu act as the primary active species. The presence of abundant Fe defects enhances electron transfer, strong hydrophilicity improves electrolyte contact, and numerous grain boundaries synergistically modulate the activation energy between active sites and oxygen-containing intermediates, significantly improving the kinetics of water oxidation.

Fine-tuning nanoflower-like Fe/Co hybrids with high content oxyhydroxide accelerating oxygen evolution kinetics

Iron hydroxide (FeOOH) is a potential active component in iron-based electrocatalysts for water electrolysis. However, its catalytic performance is constrained by its slow oxygen evolution reaction (OER) kinetics. Herein, we synthesized a nanoflower-like FeCo-hydro(oxy)oxides composite with tunable Fe/Co ratios (Fex-Coy) on nickel foam (NF) via a one-step electrodeposition technique. This method allows for precise control over the morphology and composition of the hybrid nanoflowers. The optimized Fe9-Co1 discloses favorable OER performance with a low overpotential of 222 mV at 50 mA cm-2 and demonstrates good stability exceeding 60 h at 10 mA cm-2. Further, an assembled Fe9-Co1(+)||Pt/C(-) dual-electrode configuration achieves a low cell voltage of 1.73 V at the current density of 100 mA cm-2 for water splitting, with long-term stability for 70 h and minimal degradation. Studies indicate that the distinctive nanoflower morphology of Fe9-Co1 enhances active site exposure, while both FeOOH and reconstructed CoOOH serve as catalytic centers, contributing to the observed OER performance. This work introduces a facile approach for synthesizing OER electrocatalysts, underscoring the role of the high-valence state of Fe/Co as active sites in the OER process.

Remarkable Enhancement of Catalytic Reduction of Nitrophenol Isomers by Decoration of Ni Nanosheets with Cu Species

Herein, the catalytic reduction of isomers of nitrophenols (NPS) using Ni x Cu y nanostructures with different molar ratios is presented. Ni x Cu y catalysts are prepared using star-shaped Ni nanoparticles as seeds. The applied synthesis transforms Ni nanoparticles into sheet-like structures when Cu species are deposited on them. The bimetallic sheet-like Ni x Cu y nanostructures demonstrate high catalytic activity to reduce NP isomers concerning their monometallic counterparts. The contribution of the Cu+ species affects the catalytic reduction of the NPS isomers. For example, the catalytic reduction of 4-nitrophenol (4-NP) depends on the Ni:Cu molar ratio: Ni1.75Cu > Cu > NiCu > Ni7Cu > Ni3.5Cu > Ni. The Ni7Cu catalyst exhibits the highest catalytic activity in the reduction of nitrophenol isomers 2-nitrophenol (2-NP) and 3-nitrophenol (3-NP), and the obtained results are comparable with those reported for noble-metal-based catalysts. The low-cost production of Ni x Cu y catalysts and their high catalytic stability and availability make them attractive for industrial applications.

Hierarchical MOFs with Good Catalytic Properties and Structural Stability in Oxygen-Rich and High-Temperature Environments

Metal-organic framework materials are ideal materials characterized by open frameworks, adjustable components, and high catalytic activity. They are extensively utilized for catalysis. Due to decomposition and structural collapse under high temperatures and an oxygen-rich environment, the potential of thermal catalysis is greatly limited. In this research, Co-rich hollow spheres (Co-HSs) with a gradient composition are designed and synthesized to investigate their thermal catalytic properties in the ammonium perchlorate（AP）system. The results demonstrate that Co-HSs@AP exhibits good thermal catalytic activity and a high-temperature decomposition of 292.5 °C, which is 121.6 °C lower than pure AP. The hierarchical structure confers structural stability during the thermal decomposition process. Thermogravimetry-infrared indicates that the inclusion of Co-HSs successfully boosts the level of reactive oxygen species and achieves thorough oxidation of NH3. Based on the above phenomenon, macro dynamics calculations are carried out. The results show that Co-HSs can promote the circulation of lattice oxygen and reactive oxygen species and the multidimensional diffusion of NH3 in an oxygen-rich environment. This material has significant potential for application in the fields of thermal catalysis and ammonia oxidation.

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm-2 and a Tafel slope as small as 46.0 mV dec-1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Oxygen Vacancy and Heterostructure Modulation of Co2P/Fe2P Electrocatalysts for Improving Total Water Splitting

Designing a stable and highly active catalyst for hydrogen evolution and oxygen evolution reactions (HER/OER) is essential for the industrialization of hydrogen energy but remains a major challenge. This work reports a simple approach to fabricating coupled Co2P/Fe2P nanorod array catalyst for overall water decomposition, demonstrating the source of excellent activity in the catalytic process. Under alkaline conditions, Co2P/Fe2P heterostructures exhibit an overpotential of 96 and 220 mV for HER and OER, respectively, at 10 mA cm-2. For total water splitting, a low voltage of 1.56 V is required to provide a current density of 10 mA cm-2. And the catalyst exhibits long-term durability for 30 h at a high current density of 250 mA cm-2. The analysis of the results revealed that the presence of interfacial oxygen vacancies and the strong interaction between Co2P/Fe2P provided the catalyst with more electrochemically active sites and a faster charge transfer capability, which improved the hydrolysis dissociation process. Electrochemically active metal (oxygen) hydroxide phases were produced after OER stability testing. The results of this study prove its great potential in practical industrial electrolysis and provide a reasonable and feasible strategy for the design of nonprecious metal phosphide electrocatalysts.

Self-templated flower-like NiCoZn-carbonate hydroxide hollow nanospheres for asymmetric supercapacitors with high performance

With the increasing demand for energy resources, it is crucial to explore electrode materials with high specific capacitance and cycling stability for supercapacitors. Herein, flower-like NiCoZn-carbonate hydroxide (NiCoZn-CH) hollow nanospheres are prepared using self-templated NiCoZn-glycerate solid nanospheres through the Kirkendall effect in a solvothermal reaction. Benefiting from a flower-like morphology, NiCoZn-CH not only provides large contact areas on the electrolyte-electrode and an abundant number of active sites but also shortens the ion transportation pathway. Meanwhile, the hollow structure also improves cycling stability by relieving stresses. Furthermore, Zn2+ can accelerate the ion transfer and improve the electrochemical activity. Therefore, the Ni1Co1Zn0.25-CH electrode shows an attractive specific capacitance of 1585.2 F g-1 at 1 A g-1 and excellent cycling stability. Additionally, the asymmetric supercapacitor Ni1Co1Zn0.25-CH//AC delivers a superior cycling stability of 99.9% after 15 000 cycles at 10 A g-1 and an energy density of 33.7 W h kg-1 at a power density of 400 W kg-1. This work provides a simple and efficient route for the fabrication of various carbonate hydroxides.

Discrepant roles of adsorbed OH* species on IrWOx for boosting alkaline hydrogen electrocatalysis

Improving the slow kinetics of alkaline hydrogen electrode reactions, involving hydrogen oxidation and evolution reactions (HOR/HER) is highly desirable for accelerating the commercialization of alkaline exchange membrane-based fuel cells (AEMFCs) and water electrolyzers (AEMWEs). However, fundamental understanding of the mechanism for HOR/HER catalysis under alkaline media is still debatable. Here we develop an amorphous tungsten oxide clusters modified iridium-tungsten nanocrystallines (IrWO_x) which exhibited by far the highest exchange current density and mass activity, about three times higher than the commercial Pt/C toward alkaline HOR/HER. Density functional theory (DFT) calculations reveal the WO_x clusters act as a pivotal role to boost reversible hydrogen electrode reactions in alkaline condition but via different mechanisms, which are, hydrogen binding energy (HBE) mechanism for HOR and bi-functional mechanism for HER. This work is expected to promote our fundamental understanding about the alkaline HOR/HER catalysis and provide a new avenue for rational design of highly efficient electrocatalysts toward HOR/HER under alkaline electrolytes.

Preparations of NiFe2O4 Yolk-Shell@C Nanospheres and Their Performances as Anode Materials for Lithium-Ion Batteries

At present, lithium-ion batteries (LIBs) have received widespread attention as substantial energy storage devices; thus, their electrochemical performances must be continuously researched and improved. In this paper, we demonstrate a simple self-template solvothermal method combined with annealing for the synthesis of NiFe2O4 yolk-shell (NFO-YS) and NiFe2O4 solid (NFO-S) nanospheres by controlling the heating rate and coating them with a carbon layer on the surface via high-temperature carbonization of resorcinol and formaldehyde resin. Among them, NFO-YS@C has an obvious yolk-shell structure, with a core-shell spacing of about 60 nm, and the thicknesses of the NiFe2O4 shell and carbon shell are approximately 15 and 30 nm, respectively. The yolk-shell structure can alleviate volume changes and shorten the ion/electron diffusion path, while the carbon shell can improve conductivity. Therefore, NFO-YS@C nanospheres as the anode materials of LIBs show a high initial capacity of 1087.1 mA h g-1 at 100 mA g-1, and the capacity of NFO-YS@C nanospheres impressively remains at 1023.5 mA h g-1 after 200 cycles at 200 mA g-1. The electrochemical performance of NFO-YS@C is significantly beyond NFO-S@C, which proves that the carbon coating and yolk-shell structure have good stability and excellent electron transport ability.