Double Nitrogenation Layer Formed Using Nitric Oxide for Enhancing Li+ Storage Performance, Cycling Stability, and Safety of Si Electrodes

To enhance Li storage properties, nitrogenation methods are developed for Si anodes. First, melamine, urea, and nitric oxide (NO) precursors are used to nitrogenize carbon-coated Si particles. The properties of the obtained particles are compared. It is found that the NO process can maximize the graphitic nitrogen (N) content and electronic conductivity of a sample. In addition, optimized N functional groups and O─C species on the electrode surface increase electrolyte wettability. However, with a carbon barrier layer, NO hardly nitrogenizes the Si cores. Therefore, bare Si particles are reacted with NO. Core-shell Si@amorphous SiNx particles are produced using a facile and scalable NO treatment route. The effects of the NO reaction time on the physicochemical properties and charge-discharge performance of the obtained materials are systematically examined. Finally, the Si@SiNx particles are coated with N-doped carbon. Superior capacities of 2435 and 1280 mAh g-1 are achieved at 0.2 and 5 A g-1, respectively. After 300 cycles, 90% of the initial capacity is retained. In addition, differential scanning calorimetry data indicate that the multiple nitrogenation layers formed by NO significantly suppress electrode exothermic reactions during thermal runaway.

Carbon-Coated Iron Oxide Nanoparticles Promote Reductive Stress-Mediated Cytotoxic Autophagy in Drug-Induced Senescent Breast Cancer Cells

The surface modification of magnetite nanoparticles (Fe3O4 NPs) is a promising approach to obtaining biocompatible and multifunctional nanoplatforms with numerous applications in biomedicine, for example, to fight cancer. However, little is known about the effects of Fe3O4 NP-associated reductive stress against cancer cells, especially against chemotherapy-induced drug-resistant senescent cancer cells. In the present study, Fe3O4 NPs in situ coated by dextran (Fe3O4@Dex) and glucosamine-based amorphous carbon coating (Fe3O4@aC) with potent reductive activity were characterized and tested against drug-induced senescent breast cancer cells (Hs 578T, BT-20, MDA-MB-468, and MDA-MB-175-VII cells). Fe3O4@aC caused a decrease in reactive oxygen species (ROS) production and an increase in the levels of antioxidant proteins FOXO3a, SOD1, and GPX4 that was accompanied by elevated levels of cell cycle inhibitors (p21, p27, and p57), proinflammatory (NFκB, IL-6, and IL-8) and autophagic (BECN1, LC3B) markers, nucleolar stress, and subsequent apoptotic cell death in etoposide-stimulated senescent breast cancer cells. Fe3O4@aC also promoted reductive stress-mediated cytotoxicity in nonsenescent breast cancer cells. We postulate that Fe3O4 NPs, in addition to their well-established hyperthermia and oxidative stress-mediated anticancer effects, can also be considered, if modified using amorphous carbon coating with reductive activity, as stimulators of reductive stress and cytotoxic effects in both senescent and nonsenescent breast cancer cells with different gene mutation statuses.

Achieving High Rate and Long Cycle Performance of Na2FePO4F Cathode Through Co-Modification of Ti Doping and Carbon Coating

Layered Na2FePO4F (NFPF) cathode material has received widespread attention due to its green nontoxicity, abundant raw materials, and low cost. However, its poor inherent electronic conductivity and sluggish sodium ion transportation seriously impede its capacity delivery and cycling stability. In this work, NFPF by Ti doping and conformal carbon layer coating via solid-state reaction is modified. The results of experimental study and density functional theory calculations reveal that Ti doping enhances intrinsic conductivity, accelerates Na-ion transport, and generates more Na-ion storage sites, and pyrolytic carbon from polyvinylpyrrolidone (PVP) uniformly coated on the NFPF surface improves the surface/interface conductivity and suppresses the side reactions. Under the combined effect of Ti doping and carbon coating, the optimized NFPF (marked as 5T-NF@C) exhibits excellent electrochemical performance, with a high capacity of 108.4 mAh g-1 at 0.2C, a considerable capacity of 80.0 mAh g-1 even at high current density of 10C, and a high capacity retention rate of 81.8% after 2000 cycles at 10C. When assembled into a full cell with a hard carbon anode, 5T-NF@C also show good applicability. This work indicates that co-modification of Ti doping and carbon coating makes NFPF achieve high rate and long cycle performance for sodium-ion batteries.

Sb Doping and Amorphization Co-Induced High Capacity and Excellent Durability of Tin Sulfide-Based Anode for K-Ion Batteries

The carbon nanotubes (CNTs) supported amorphous Sb doped substoichiometric tin dulfide (Sb─SnSx ) with a carbon coating (the C/Sb─SnSx @CNTs-500) is reported to be an efficient anode material for K+ storage. The formation of the C/Sb─SnSx @CNTs-500 is simply achieved through the thermally induced desulfurization of tin sulfide via a controlled annealing of the C/Sb─SnS2 @CNTs at 500 °C. When used for the K+ storage, it can deliver stable reversible capacities of 406.5, 305.7, and 238.4 mAh g-1 at 0.1, 1.0, and 2.0 A g-1 , respectively, and shows no capacity drops when potassiated/depotassiated at 1.0 and 2.0 A g-1 for >3000 and 2400 cycles, respectively. Even at 10, 20, and 30 A g-1 , it can still deliver stable reversible capacities of 138.5, 85.1, and 73.8 mAh g-1 , respectively. The unique structure, which combines the advantageous features of carbon integration/coating, metal doping, and desulfurization-induced amorphous structure, is the main origin of the high performance of the C/Sb─SnSx @CNTs-500. Specifically, the carbon integration/coating can increase the electric conductivity and stability of the C/Sb─SnSx @CNTs-500. The density function theory calculation indicates that the Sb doping and the desulfurization can facilitate the potassiation and increase the electric conductivity of Sb─SnSx . Additionally, the desulfurization can increase the K+ diffusivity in Sb─SnSx .

Interface Optimizing Core-Shell PZT@Carbon/Polyurethane Composites with Enhanced Passive Piezoelectric Vibration Damping Performance

Presently, piezoelectric materials are gradually playing a significant role within composites to improve the damping and vibrational attenuation capacities of host composites. Previous studies paid attention to isolating the mechanical damping contribution and piezoelectric contribution of polymer-based piezoelectric composites (PPCs). However, reports detailing the piezoelectric damping of such materials have not paid sufficient attention to the technologies and methods to improve the piezoelectric damping of PPCs. In this study, we propose novel damping polyurethane (PU)-based piezoelectric composites with carbon-coated piezoelectric fillers (PZT@C/PU) with improved piezoelectric damping ability. The mechanical damping and piezoelectric damping of composites were theoretically decoupled, and we elaborate on the mechanism enhancing piezoelectric damping through the carbon coating strategy by comparing with the composites with nonpiezoelectric fillers. The as-fabricated core-shell structure having an optimized interface exhibits the proposed PZT@C/PU composite pads with relatively prominent damping ability (loss factor tan δmax = 1.0, tan δRT = 0.3), ductility (400.63%), and sound isolating behavior (transmission loss TL > 23 dB). Moreover, the vibration test results of as-fabricated sandwich structural PZT@C/PU composite damping devices exhibit outstanding vibration attenuating behavior (damping ratio ζ = 0.198). The study herein validates that the carbon shell coated on piezoelectric fillers would effectively increase damping performance of PU-based piezoelectric composites by the enhancement of piezoelectric performance caused by carbon coating piezoelectric fillers, which indicates that this material has potential for future applications in the field of vibration and noise reduction, thereby driving forward and expanding the fundamental understanding in the area of PPCs damping and vibration attenuation.

Oxalic acid-assisted preparation of LTO-carbon composite anode material for lithium-ion batteries

This study presents an oxalic acid-assisted method for synthesizing spinel-structured lithium titanate (Li4Ti5O12; LTO)/carbon composite materials. The Ag-doped LTO nanoparticles (NPs) are synthesized via flame spray pyrolysis (FSP). The synthesized material is used as a precursor for synthesizing the LTO-NP/C composite material with chitosan as a carbon source and oxalic acid as an additive. Oxalic acid improves the dissolution of chitosan in water as well as changes the composition and physical and chemical properties of the synthesized LTO-NP/C composite material. The oxalic acid/chitosan ratio can be optimized to improve the electrochemical performance of the LTO-NP/C composite material, and the electrode synthesized with a high mass loading ratio (5.44 mg cm-2) exhibits specific discharge capacities of 156.5 and 136 mAh g-1at 0.05 C- and 10 C-rate currents, respectively. Moreover, the synthesized composite LTO-NP/C composite material exhibits good cycling stability, and only 1.7% decrease in its specific capacity was observed after 200 charging-discharging cycles at 10 C-rate discharging current.

Nitrogen and Sulfur Co-Doped Carbon-Coated Ni3 S2 /MoO2 Nanowires as Bifunctional Catalysts for Alkaline Seawater Electrolysis

Bifunctional catalysts have inherent advantages in simplifying electrolysis devices and reducing electrolysis costs. Developing efficient and stable bifunctional catalysts is of great significance for industrial hydrogen production. Herein, a bifunctional catalyst, composed of nitrogen and sulfur co-doped carbon-coated trinickel disulfide (Ni3 S2 )/molybdenum dioxide (MoO2 ) nanowires (NiMoS@NSC NWs), is developed for seawater electrolysis. The designed NiMoS@NSC exhibited high activity in alkaline electrolyte with only 52 and 191 mV overpotential to attain 10 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Significantly, the electrolyzer (NiMoS@NSC||NiMoS@NSC) based on this bifunctional catalyst drove 100 mA cm-2 at only 1.71 V along with a robust stability over 100 h in alkaline seawater, which is superior to a platinum/nickel-iron layered double hydroxide couple (Pt||NiFe LDH). Theoretical calculations indicated that interfacial interactions between Ni3 S2 and MoO2 rearranged the charge at interfaces and endowed Mo sites at the interfaces with Pt-like HER activity, while Ni sites on Ni3 S2 surfaces at non-interfaces are the active centers for OER. Meanwhile, theoretical calculations and experimental results also demonstrated that interfacial interactions improved the electrical conductivity, boosting reaction kinetics for both HER and OER. This study presented a novel insight into the design of high-performance bifunctional electrocatalysts for seawater splitting.

In Situ Construction of High-Thermal-Conductivity and Negative-Permittivity Epoxy/Carbon Fiber@Carbon Composites with a 3D Network by High-Temperature Chemical Vapor Deposition

Modern highly integrated microelectronic devices are unable to dissipate heat over time, which greatly affects the operating efficiency and service life of electronic equipment. Constructing high-thermal-conductivity composites with 3D network structures is a hot research topic. In this article, carbon fiber felt (CFF) was prepared by airflow netting forming technology and needle punching combined with stepped heat treatment. Then, carbon-coated carbon fiber felt (C@CFF) with a three-dimensional network structure was constructed in situ by high-temperature chemical vapor deposition (CVD). Finally, high-temperature treatment was used to improve the degree of crystallinity of C@CFF and further enhance its graphitization. The epoxy (EP) composites were prepared by simple vacuum infiltration-molding curing. The test results showed that the in-plane thermal conductivity (K∥) and through-plane thermal conductivity (K⊥) of EP/C@CFF-2300 °C could reach up to 13.08 and 2.78 W/mK, respectively, where the deposited carbon content was 11.76 vol %. The in-plane thermal conductivity enhancement (TCE) of EP/C@CFF-2300 °C was improved by 6440 and 808% compared to those of pure EP and EP/CFF, respectively. The high-temperature treatment greatly provides an improvement in thermal conductivity for the in-plane and the through-plane. Infrared imaging showed excellent thermal management properties of the prepared epoxy composites. EP/C@CFF-2300 °C owned an in-plane AC conductivity of up to 0.035 S/cm at 10 kHz, and Lorentz-Drude-type negative permittivity behaviors were observed at the tested frequency region. The CFF thermally conductive composites prepared by the above method have a broad application prospect in the field of advanced thermal management and electromagnetics.

Rapid Surface Modification of Stainless Steel 304L Electrodes for Microbial Electrochemical Sensor Application

Electrogenic microorganisms serve as important biocatalysts for microbial electrochemical sensors (MESes). The electrical signal produced is based on the rate of electron transfer between the microbes and electrodes, which represents the biotoxicity of water. However, existing MESes require complex and sophisticated fabrication methods. Here, several low-cost and rapid surface modification strategies (carbon powder-coated, flame-oxidized, and acid-bleached) have been demonstrated and studied for biosensing purposes. Surface-modified MESe bioanodes were successfully applied to detect multiple model pollutants including sodium acetate, ethanol, thinner, and palm oil mill effluent under three different testing sequences, namely, pollutant incremental, pollutant dumping, and water dilution tests. The carbon powder-coated bioanode showed the most responsive signal profile for all the three tests, which is in line with the average roughness values (Ra) when tested with atomic force microscopy. The carbon powder-coated electrode possessed a Ra value of 0.844, while flame-oxidized, acid-bleached, and control samples recorded 0.323, 0.336, and 0.264, respectively. The higher roughness was caused by the carbon coating and provided adhesive sites for microbial attachment and growth. The accuracy of MESe was also verified by correlating with chemical oxygen demand (COD) results. Similar to the sensitivity test, the carbon powder-coated bioanode obtained the highest R2 value of 0.9754 when correlated with COD results, indicating a high potential of replacing conventional water quality analysis methods. The reported work is of great significance to showcase facile surface modification techniques for MESes, which are cost-effective and sustainable while retaining the biocompatibility toward the microbial community with carbon-based coatings.

Bias Voltage Dependency of Structural and Bipolar Plate-Related Properties of Cathodic Arc-Deposited Carbon-Based Coatings

Carbon-based coatings composed of a chromium interlayer and a carbon top layer were deposited on stainless steel substrates via cathodic arc evaporation. During the carbon deposition, the bias voltage was varied between 900 and 1 V to investigate the influence on the structural, electrical, and electrochemical properties. Raman spectroscopy indicated a dependency of the intensity ratio and G peak position on the bias voltage, which can be attributed to an alteration of the structure. Transmission electron microscopy (TEM) cross-section investigations revealed a graphite-like structure for most carbon top layers but with an increasing amount of disordered fractions, eventually resulting in an amorphous structure at 1 V. To further examine the structure, electron energy loss spectroscopy (EELS) was used. In the high-loss region, distinct π* and σ* peaks could be observed, which agree well with the TEM results. Additionally, analysis of the low-loss region showed that the 1 V carbon top layer exhibits a shifted σ plasmon peak at 20 eV corresponding to an amorphous structure. The carbon-based coatings are highly conductive with low interfacial contact resistance values between 4 and 1.5 mΩ cm2 at 150 N cm-2. From a bias voltage of 200 V, the resistance increases. To evaluate the corrosion resistance, we conducted potentiodynamic polarization tests. At first, with decreasing bias voltage, the corrosion resistance increases and then decreases for both the 100 and 1 V samples. Considering the low thickness, the coating with a carbon top layer deposited at 600 V had the best corrosion resistance. In combination with the excellent contact resistance, the 600 V sample is a highly suitable coating for metallic bipolar plates.

In Situ Low-Temperature Carbonization Capping of LiFePO4 with Coke for Enhanced Lithium Battery Performance

Lithium batteries incorporating LiFePO4 (LFP) as the cathode material have gained significant attention in recent research. However, the limited electronic and ionic conductivity of LFP poses challenges to its cycling performance and overall efficiency. In this study, we address these issues by synthesizing a series of LiFePO4/carbon (LFP/C) composites through low-temperature carbonization coating of LFP in the presence of Coke as the carbon source. The resulting lithium batteries utilizing LFP/C as the cathode material exhibited impressive discharge specific capacities of 148.35 mA·h/g and 126.74 mA·h/g at 0.1 C and 1 C rates, respectively. Even after 200 cycles of charging and discharging, the capacities remained remarkably high, with values of 93.74% and 97.05% retention, showcasing excellent cycling stability. Notably, the LFP/C composite displayed exceptional rate capability, and capacity retention of 99.27% after cycling at different multiplication rates. These findings underscore the efficacy of in situ low-temperature carbonization capping of LFP with Coke in significantly improving both the cycling stability and rate capability of lithium batteries.

Small-Molecule Organic Cathodes with Carbon Coating for Highly Efficient Potassium-ion Batteries

Small-molecule organic cathodes face dissolution in potassium-ion batteries (PIBs). For the first time, an interesting and effective strategy is unveiled to resolve this issue by designing a new soluble small-molecule organic compound namely [N,N'-bis(2-anthraquinone)]-1,4,5,8-naphthalenetetracarboxdiimide (NTCDI-DAQ, 237 mAh g-1 ): Through the precise manipulation of carbonization temperature and time, the molecules on the surface of NTCDI-DAQ particles can be transformed into amorphous carbon with controllable thickness. This strategy called surface self-carbonization can form a carbon protective layer on organic cathodes and significantly increase their insolubility against liquid electrolytes without affecting the electrochemical behavior of bulk particles. As a result, the as-obtained NTCDI-DAQ@C sample displays significantly improved cathode performance in PIBs. In half cells, NTCDI-DAQ@C shows superior capacity stability of 84 % compared to 35 % of NTCDI-DAQ during 30 cycles under the same conditions. In full cells with a KC8 anode, NTCDI-DAQ@C delivers a peak discharge capacity of 236 mAh g-1 cathode and a high energy density of 255 Wh kg-1 cathode in 0.1-2.8 V, with 40 % capacity retention during 3000 cycles at 1 A g-1 . To the best of our knowledge, the integrated performance of NTCDI-DAQ@C is among the best of soluble organic cathodes reported in PIBs.

Synthesis of Si/C Composites by Silicon Waste Recycling and Carbon Coating for High-Capacity Lithium-Ion Storage

It is of great significance to recycle the silicon (Si) kerf slurry waste from the photovoltaic (PV) industry. Si holds great promise as the anode material for Li-ion batteries (LIBs) due to its high theoretical capacity. However, the large volume expansion of Si during the electrochemical processes always leads to electrode collapse and a rapid decline in electrochemical performance. Herein, an effective carbon coating strategy is utilized to construct a precise Si@C_PPy composite using cutting-waste silicon and polypyrrole (PPy). By optimizing the mass ratio of Si and carbon, the Si@C_PPy composite can exhibit a high specific capacity and superior rate capability (1436 mAh g^-1 at 0.1 A g^-1 and 607 mAh g^-1 at 1.0 A g^-1). Moreover, the Si@C_PPy composite also shows better cycling stability than the pristine prescreen silicon (PS-Si), as the carbon coating can effectively alleviate the volume expansion of Si during the lithiation/delithiation process. This work showcases a high-value utilization of PV silicon scraps, which helps to reduce resource waste and develop green energy storage.

Engendering High Energy Density LiFePO4 Electrodes with Morphological and Compositional Tuning

Improving the energy density of Li-ion batteries is critical to meet the requirements of electric vehicles and energy storage systems. In this work, LiFePO₄ active material was combined with single-walled carbon nanotubes as the conductive additive to develop high-energy-density cathodes for rechargeable Li-ion batteries. The effect of the morphology of the active material particles on the cathodes' electrochemical characteristics was investigated. Although providing higher packing density of electrodes, spherical LiFePO₄ microparticles had poorer contact with an aluminum current collector and showed lower rate capability than plate-shaped LiFePO₄ nanoparticles. A carbon-coated current collector helped enhance the interfacial contact with spherical LiFePO₄ particles and was instrumental in combining high electrode packing density (1.8 g cm^-3) with excellent rate capability (100 mAh g^-1 at 10C). The weight percentages of carbon nanotubes and polyvinylidene fluoride binder in the electrodes were optimized for electrical conductivity, rate capability, adhesion strength, and cyclic stability. The electrodes that were formulated with 0.25 wt.% of carbon nanotubes and 1.75 wt.% of the binder demonstrated the best overall performance. The optimized electrode composition was used to formulate thick free-standing electrodes with high energy and power densities, achieving the areal capacity of 5.9 mAh cm^-2 at 1C rate.

N-Containing Carbon-Coated β-Si3 N4 Enhances Si Anodes for High-Performance Li-Ion Batteries

The lithiation/delithiation properties of α-Si₃ N₄ and β-Si₃ N₄ are compared and the carbon coating effects are examined. Then, β-Si₃ N₄ at various fractions is used as the secondary phase in a Si anode to modify the electrode properties. The incorporated β-Si₃ N₄ decreases the crystal size of Si and introduces a new NSiO species at the β-Si₃ N₄ /Si interface. The nitrogen from the milled β-Si₃ N₄ diffuses into the surface carbon coating during the carbonization heat treatment, forming pyrrolic nitrogen and CNO species. The synergistic effects of combining β-Si₃ N₄ and Si phases on the specific capacity are confirmed. The operando X-ray diffraction and X-ray photoelectron spectroscopy data indicate that β-Si₃ N₄ is partially consumed during lithiation to form a favorable Li₃ N species at the electrode. However, the crystalline structure of the hexagonal β-Si₃ N₄ is preserved after prolonged cycling, which prevents electrode agglomeration and performance deterioration. The carbon-coated β-Si₃ N₄ /Si composite anode shows specific capacities of 1068 and 480 mAh g^-1 at 0.2 and 5 A g^-1 , respectively. A full cell consisting of the carbon-coated β-Si₃ N₄ /Si anode and a LiNi_0.8 Co_0.1 Mn_0.1 O₂ cathode is constructed and its properties are evaluated. The potential of the proposed composite anodes for Li-ion battery applications is demonstrated.

Enhanced Performance of KVPO4F0.5O0.5 in Potassium Batteries by Carbon Coating Interfaces

Potassium vanadium oxyfluoride phosphate of composition KVPO₄F_0.5O_0.5 was modified by a carbon coating to enhance its electrochemical performance. Two distinct methods were used, first, chemical vapor deposition (CVD) using acetylene gas as a carbon precursor and second, an aqueous route using an abundant, cheap, and green precursor (chitosan) followed by a pyrolysis step. The formation of a 5 to 7 nm-thick carbon coating was confirmed by transmission electron microscopy and it was found to be more homogeneous in the case of CVD using acetylene gas. Indeed, an increase of the specific surface area of one order of magnitude, low content of C sp², and residual oxygen surface functionalities were observed when the coating was obtained using chitosan. Pristine and carbon-coated materials were compared as positive electrode materials in potassium half-cells cycled at a C/5 (C = 26.5 mA g^-1) rate within a potential window of 3 to 5 V vs K⁺/K. The formation by CVD of a uniform carbon coating with the limited presence of surface functions was shown to improve the initial coulombic efficiency up to 87% for KVPFO₄F_0.5O_0.5-C₂H₂ and to mitigate electrolyte decomposition. Thus, performance at high C-rates such as 10 C was significantly improved, with ∼50% of the initial capacity maintained after 10 cycles, whereas a fast capacity loss is observed for the pristine material.

Solid-State Transformations of Mayenite and Core-Shell Structures of C12A7@C Type at High Pressure, High Temperature Conditions

Calcium aluminate of a mayenite structure, 12CaO∙7Al₂O₃ (C12A7), is widely applicable in many fields of modern science and technology. Therefore, its behavior under various experimental conditions is of special interest. The present research aimed to estimate the possible impact of the carbon shell in core-shell materials of C12A7@C type on the proceeding of solid-state reactions of mayenite with graphite and magnesium oxide under High Pressure, High Temperature (HPHT) conditions. The phase composition of the solid-state products formed at a pressure of 4 GPa and temperature of 1450 °C was studied. As is found, the interaction of mayenite with graphite under such conditions is accompanied by the formation of an aluminum-rich phase of the CaO∙6Al₂O₃ composition, while in the case of core-shell structure (C12A7@C), the same interaction does not lead to the formation of such a single phase. For this system, a number of hardly identified calcium aluminate phases along with the carbide-like phrases have appeared. The main product of the interaction of mayenite and C12A7@C with MgO under HPHT conditions is the spinel phase Al₂MgO₄. This indicates that, in the case of the C12A7@C structure, the carbon shell is not able to prevent the interaction of the oxide mayenite core with magnesium oxide located outside the carbon shell. Nevertheless, the other solid-state products accompanying the spinel formation are significantly different for the cases of pure C12A7 and C12A7@C core-shell structure. The obtained results clearly illustrate that the HPHT conditions used in these experiments lead to the complete destruction of the mayenite structure and the formation of new phases, which compositions differ noticeably depending on the precursor used-pure mayenite or C12A7@C core-shell structure.

Three-Dimensional Printing of Recycled Polypropylene and Activated Carbon Coatings for Harmful Gas Adsorption and Antibacterial Properties

In recent years, the utilization of three-dimensional (3D) printing has been expanding due to advances in technology and economic efficiency. One of the 3D printing technologies is fused deposition modeling, which can be used to create different kinds of products or prototypes from various polymer filaments. In this study, the activated carbon (AC) coating was introduced to the 3D outputs printed using recycled polymer materials to impart multi-functions such as adsorption of harmful gas and antimicrobial activities. A filament of uniform diameter (1.75 μm) and a filter template in the form of a 3D fabric shape were prepared through the extrusion and 3D printing processes, respectively, of the recycled polymer. In the next process, the 3D filter was developed by coating the nanoporous AC, produced from the pyrolysis fuel oil and waste PET, on the 3D filter template through direct coating. The 3D filters coated with the nanoporous activated carbon showed the enhanced adsorption capacity of 1038.74 mg of SO₂ gas and the antibacterial properties of 49% removal of E. coli bacteria. As a model system, a functional gas mask that has harmful gas adsorption abilities and antibacterial properties has been produced by a 3D printing process.

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Na₃V₂(PO₄)₂F₃ (NVPF) is an extremely promising sodium storage cathode material for sodium-ion batteries because of its stable structure, wide electrochemical window, and excellent electrochemical properties. Nevertheless, the low ionic and electronic conductivity resulting from the insulated PO₄^3- structure limits its further development. In this work, the different valence states of Mn^x+ ions (x = 2, 3, 4) doped NVPF were synthesized by the hydrothermal method. A series of tests and characterizations reveals that the doping of Mn ions (Mn²⁺, Mn³⁺, Mn⁴⁺) changes the crystal structure and also affects the residual carbon content, which further influences the electrochemical properties of NVPF-based materials. The sodiation/desodiation mechanism was also investigated. Among them, the as-prepared NVPF doped with Mn²⁺ delivers a high reversible discharge capacity (116.2 mAh g^-1 at 0.2 C), and the capacity retention of 67.7% after 400 cycles at 1 C was obtained. Such excellent performance and facile modified methods will provide new design ideas for the development of secondary batteries.

Rational Construction of C@Sn/NSGr Composites as Enhanced Performance Anodes for Lithium Ion Batteries

As a potential anode material for lithium-ion batteries (LIBs), metal tin shows a high specific capacity. However, its inherent "volume effect" may easily turn tin-based electrode materials into powder and make them fall off in the cycle process, eventually leading to the reduction of the specific capacity, rate and cycle performance of the batteries. Considering the "volume effect" of tin, this study proposes to construct a carbon coating and three-dimensional graphene network to obtain a "double confinement" of metal tin, so as to improve the cycle and rate performance of the composite. This excellent construction can stabilize the tin and prevent its agglomeration during heat treatment and its pulverization during cycling, improving the electrochemical properties of tin-based composites. When the optimized composite material of C@Sn/NSGr-7.5 was used as an anode material in LIB, it maintained a specific capacity of about 667 mAh g^-1 after 150 cycles at the current density of 0.1 A g^-1 and exhibited a good cycle performance. It also displayed a good rate performance with a capability of 663 mAh g^-1, 516 mAh g^-1, 389 mAh g^-1, 290 mAh g^-1, 209 mAh g^-1 and 141 mAh g^-1 at 0.1 A g^-1, 0.2 A g^-1, 0.5 A g^-1, 1 A g^-1, 2 A g^-1 and 5 A g^-1, respectively. Furthermore, it delivered certain capacitance characteristics, which could improve the specific capacity of the battery. The above results showed that this is an effective method to obtain high-performance tin-based anode materials, which is of great significance for the development of new anode materials for LIBs.

Core-Shell Structured Carbon@Al2O3 Membrane with Enhanced Acid Resistance for Acid Solution Treatment

Ceramic membrane has an important application prospect in industrial acid solution treatment. Enhancement of the acid resistance is the key strategy to optimize the membrane treatment effect. This work reports a core-shell structured membrane fabricated on alumina ceramic substrates via a one-step in situ hydrothermal method. The acid resistance of the modified membrane was significantly improved due to the protection provided by a chemically stable carbon layer. After modification, the masses lost by the membrane in the hydrochloric acid solution and the acetic acid solution were sharply reduced by 90.91% and 76.92%, respectively. Kinetic models and isotherm models of adsorption were employed to describe acid adsorption occurring during the membrane process and indicated that the modified membrane exhibited pseudo-second-order kinetics and Langmuir model adsorption. Compared to the pristine membrane, the faster adsorption speed and the lower adsorption capacity were exhibited by the modified membrane, which further had a good performance with treating various kinds of acid solutions. Moreover, the modified membrane could be recycled without obvious flux decay. This modification method provides a facile and efficient strategy for the fabrication of acid-resistant membranes for use in extreme conditions.

Carbon Layer Formation on Hexagonal Boron Nitride by Plasma Processing in Hydroquinone Aqueous Solution

Although hexagonal boron nitride (hBN) is a thermally conductive and electrically insulating filler in composite materials, surface modification remains difficult, which limits its dispersibility and functionalization. In this study, carbon layer formation on hBN particles by plasma processing in hydroquinone aqueous solution was investigated as a surface modification technique. Carbon components with features of polymeric hydrogenated amorphous carbon were found to be uniformly distributed on the hydroquinone-aided plasma-modified hBN (HQpBN) particles. Electron spin resonance measurements revealed abundant unpaired electrons in HQpBN, indicating that defects were formed on hBN by plasma processing and that the carbon layer contained dangling bonds. The defects on hBN could help in the attachment of the carbon layer, whereas the dangling bonds could act as reactive sites for further functionalization. The carbon layer on HQpBN was successfully functionalized with isocyanate groups, thus confirming the ability of this carbon layer to facilitate surface modification. These results demonstrate that the carbon layer formed on hBN can provide a designable interface in organic/inorganic composite materials.

Carbon-Coated ZnS-FeS2 Heterostructure as an Anode Material for Lithium-Ion Battery Applications

The construction of carbon-coated heterostructures of bimetallic sulfide is an effective technique to improve the electrochemical activity of anode materials in lithium-ion batteries. In this work, the carbon-coated heterostructured ZnS-FeS₂ is prepared by a two-step hydrothermal method. The crystallinity and nature of carbon-coating are confirmed by the investigation of XRD and Raman spectroscopy techniques. The nanoparticle morphology of ZnS and plate-like morphology of FeS₂ is established by TEM images. The chemical composition of heterostructure ZnS-FeS₂@C is discovered by an XPS study. The CV results have disclosed the charge storage mechanism, which depends on the capacitive and diffusion process. The BET surface area (37.95 m²g^-1) and lower R_ct value (137 Ω) of ZnS-FeS₂@C are beneficial to attain higher lithium-ion storage performance. It delivered a discharge capacity of 821 mAh g^-1 in the 500th continuous cycle @ A g^-1, with a coulombic efficiency of around 100%, which is higher than the ZnS-FeS₂ heterostructure (512 mAh g^-1). The proposed strategy can improve the electrochemical performance and stability of lithium-ion batteries, and can be helpful in finding highly effective anode materials for energy storage devices.

Carbon and Graphene Coatings for the Thermal Management of Sustainable LMP Batteries for Automotive Applications

The increment of battery temperature during the operation caused by internal heat generation is one of the main issues to face in the management of storage systems for automotive and power generation applications. The temperature strongly affects the battery efficiency, granting the best performance in a limited range. The investigation and testing of materials for the improvement of heat dissipation are crucial for modern battery systems that must provide high power and energy density. This study presents an analysis of the thermal behavior of a lithium-polymer cell, which can be stacked in a battery pack for electric vehicles. The cell is sheltered with layers of two different materials: carbon and graphene, used in turn, to dissipate the heat generated during the operation in natural convection. Optical diagnostics in the infrared band is used to evaluate the battery surface temperature and the effect of the coatings. Experiments are performed in two operating conditions varying the current demand. Moreover, two theoretical correlations are used to estimate the thermal parameters of the battery with a reverse-logic approach. The convective heat transfer coefficient h and the specific heat capacity c_p of the battery are evaluated and provided for the Li-ion battery under investigation for different coatings' conductivity. The results highlight the advantage of using a coating and the effect of the coating properties to reduce the battery temperature under operation. In particular, graphene is preferable because it provides the lowest battery temperature in the most intense operating condition.

Improved Electrochemical Performance of NTs-WS2@C Nanocomposites for Lithium-Ion and Sodium-Ion Batteries

Even though WS₂ nanotubes (NTs-WS₂) have great potential as anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) thanks to their unusual layered structure, their conductivity and cycling stability are far from satisfactory. To tackle these issues, carbon-coated WS₂ (NTs-WS₂@C) nanocomposites were prepared through a facile synthesis method that involved precipitating a carbon precursor (20% sucrose) on WS₂ nanotubes, followed by annealing treatment under an argon environment. Thanks to the presence of highly conductive and mechanically robust carbon on the outer surface, NTs-WS₂@C nanocomposites show improved electrochemical performance compared with bare NTs-WS₂. After 60 cycles at 80 mA g^-1 current density, the cells display high capacities of 305 mAh g^-1 in LIBs and 152 mAh g^-1 in SIBs, respectively. As the current density increases to 600 mA g^-1, it provides specific capacities of 209 and 115 mAh g^-1, correspondingly. The enhanced electrochemical performance in LIBs and SIBs is primarily attributed to the synergistic effects of the tubular architecture of WS₂, carbon network and stable nanocomposite structure, which can effectively constrain volume variation during the metal ions intercalation/deintercalation processes.

A completely precious metal-free alkaline fuel cell with enhanced performance using a carbon-coated nickel anode

SignificanceWe present a groundbreaking advance in completely nonprecious hydrogen fuel cell technologies achieving a record power density of 200 mW/cm² with Ni@CN_x anode and Co-Mn cathode. The 2-nm CN_x coating weakens the O-binding energy, which effectively mitigates the undesirable surface oxidation during hydrogen oxidation reaction (HOR) polarization, leading to a stable fuel cell operation for Ni@CN_x over 100 h at 200 mA/cm², superior to a Ni nanoparticle counterpart. Ni@CNx exhibited a dramatically enhanced tolerance to CO relative to Pt/C, enabling the use of hydrogen gas with trace amounts of CO, critical for practical applications. The complete removal of precious metals in fuel cells lowers the catalyst cost to virtually negligible levels and marks a milestone for practical alkaline fuel cells.

Synthesis of MnO-Sn cubes embedding in nitrogen-doped carbon nanofibers with high lithium-ion storage performance

In this paper, a carbon nanofiber (CNF) hybrid nanomaterial composed of MnO-Sn cubes embedding in nitrogen-doped CNF (MnO-Sn@CNF) is synthesized through electrospinning and post-thermal reduction processes. It exhibits good electrochemical lithium-ion storage performance as the anode, such as high reversible capacity, outstanding cycle performance (754 mAh g^-1at 1 A g^-1after 1000 cycles), and good rate capability (447 mAh g^-1at 5 A g^-1). The excellent electrochemical properties are derived from a unique nanostructure design. MnO-Sn@CNF has a three-dimensional conductive network with a stable core-shell structure, which improves the electrical conductivity and mechanical stability of the materials. In addition, the mesopores on the surface of carbon fibers can shorten the diffusion distance of lithium ions and promote the combination of active sites of the material with lithium ions. The internal MnO and Sn form a heterostructure, which enhances the stability of the physical structure of the electrode material. This material design method provides a reference strategy for the development of high-performance lithium-ion batteries anode.

Carbon coating on metal oxide materials for electrochemical energy storage

During the past decades, nano-structured metal oxide electrode materials have received growing attention due to their low development cost and high theoretical specific capacity, accordingly, quite a lot of metal oxide electrode materials are being used in electrochemical energy storage devices. However, the further development was limited by the relatively low electrical conductivity and the volume expansion during electrochemical reactions. Thus, many approaches have been proposed to obtain high-efficiency metal oxide electrode materials, such as designing nanomaterials with ideal morphology and high specific surface area, optimizing with carbon-based materials (such as graphene and glucose) to prepare nanocomposites, combining with conductive substrates to enhance the conductivity of electrodes, etc. Owning to the advantages of low cost and high chemical stability of carbon materials, core-shell structure formed by carbon-coated metal oxides is considered to be a promising solution to solve these problems. Therefore, this review mainly focuses on recent research advances in the field of carbon-coated metal oxides for energy storage, summarizing the advantages and disadvantages of common metal oxides and different types of carbon sources, and proposing methods to optimize the material properties in terms of structure and morphology, carbon layer thickness, coating method, specific surface area and pore size distribution, as well as improving electrical conductivity. In addition, the double or multi-layer coating strategy is also a reflection of the continuous development of carbon coating method. Hopefully, this rereview may provide a new direction for the renewal and development of future energy storage electrode materials.

One-Dimensional CdS/Carbon/Au Plasmonic Nanoarray Photoanodes via In Situ Reduction-Graphitization Approach toward Efficient Solar Hydrogen Evolution

Photoelectrochemical (PEC) hydrogen evolution has been acknowledged as a promising "green" technique to convert solar energy into clean chemical fuel. Photoanodes play a key role in determining the performance of PEC systems, spurring numerous efforts to develop advanced materials as well as structures to improve the photoconversion efficiency. In this work, we report the rational design of a plasmonic hierarchical nanorod array, composed of oriented one-dimensional (1D) CdS nanorods decorated with a uniformly wrapped graphite-like carbon (C_PDA) layer and Au nanoparticles (Au NPs), as highly efficient photoanode materials. An interfacial in situ reduction-graphitization method has been conducted to prepare the CdS/C_PDA/Au nanoarchitecture, where polydopamine (PDA) coating was used as a C source and a reductant. The CdS/C_PDA/Au nanoarray photoanode demonstrates superior photoconversion efficiency with a photocurrent density of 8.74 mA/cm² and an IPCE value (480 nm) of 30.2% (at 1.23 V vs RHE), under simulated sunlight irradiation, which are 12.7 and 13.5 times higher than pristine CdS. The significant enhancement of PEC performance is mainly benefited from the increase of the entire quantum yield and efficiency due to the formation of a Schottky rectifier, localized surface plasmon resonance (LSPR)-enhanced light absorption, and promoted hot-electron injection from interlayered graphene-like carbon. More importantly, thanks to the inhibited charge carrier recombination process and transferred oxidation reaction sites, the fabricated CdS/C_PDA/Au photoelectrode exhibits lengthened electron lifetimes and better photostability, illustrating its wonderful potential for future PEC application.

Carbon-Coated SiO2 Composites as Promising Anode Material for Li-Ion Batteries

Porous silica-based materials are a promising alternative to graphite anodes for Li-ion batteries due to their high theoretical capacity, low discharge potential similar to pure silicon, superior cycling stability compared to silicon, abundance, and environmental friendliness. However, several challenges prevent the practical application of silica anodes, such as low coulombic efficiency and irreversible capacity losses during cycling. The main strategy to tackle the challenges of silica as an anode material has been developed to prepare carbon-coated SiO₂ composites by carbonization in argon atmosphere. A facile and eco-friendly method of preparing carbon-coated SiO₂ composites using sucrose is reported herein. The carbon-coated SiO₂ composites were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, cyclic voltammetry, and charge–discharge cycling. A C/SiO₂-0.085 M calendered electrode displays the best cycling stability, capacity of 714.3 mAh·g⁻¹, and coulombic efficiency as well as the lowest charge transfer resistance over 200 cycles without electrode degradation. The electrochemical performance improvement could be attributed to the positive effect of the carbon thin layer that can effectively diminish interfacial impedance.

Polyimide-Derived Carbon-Coated Li4Ti5O12 as High-Rate Anode Materials for Lithium Ion Batteries

Carbon-coated Li₄Ti₅O₁₂ (LTO) has been prepared using polyimide (PI) as a carbon source via the thermal imidization of polyamic acid (PAA) followed by a carbonization process. In this study, the PI with different structures based on pyromellitic dianhydride (PMDA), 4,4′-oxydianiline (ODA), and p-phenylenediamine (p-PDA) moieties have been synthesized. The effect of the PI structure on the electrochemical performance of the carbon-coated LTO has been investigated. The results indicate that the molecular arrangement of PI can be improved when the rigid p-PDA units are introduced into the PI backbone. The carbons derived from the p-PDA-based PI show a more regular graphite structure with fewer defects and higher conductivity. As a result, the carbon-coated LTO exhibits a better rate performance with a discharge capacity of 137.5 mAh/g at 20 C, which is almost 1.5 times larger than that of bare LTO (94.4 mAh/g).

Nitrogen-Doped Carbon-Coating Disproportionated SiO Materials as Long Cycling Stable Anode for Lithium Ion Batteries

Silicon monoxide (SiO) is a kind of promising anode material for lithium-ion batteries because of its smaller volume change during the charge and discharge process than pure silicon and its higher theoretical capacity than commercialized graphite. However, its fast-fading capacity still restricts the development of practical application of SiO. A simple and cheap strategy to dope nitrogen and coat carbon on the surface of disproportionated SiO is proposed to improve the cycling stability significantly even at a high specific current. The capacity retention is nearly 85% after 250 cycles and more than 69% after 500 cycles at a specific current of 1000 mA g⁻¹. Even at a specific current of 2000 mA g⁻¹, its cycling performance behaves similarly to that of 1000 mA g⁻¹. Nitrogen doping in materials could improve the conductivity of materials because pyridinic nitrogen and pyrrolic nitrogen could improve the electron conductivity and provide defects to contribute to the diffusion of lithium ions. The use of pitch and melamine, which are easily available industrial raw materials, makes it possible to contribute to the practical application.

One-Pot Synthesis of Glucose-Derived Carbon Coated Ni3S2 Nanowires as a Battery-Type Electrode for High Performance Supercapacitors

We report a novel Ni₃S₂ carbon coated (denoted as NCC) rod-like structure prepared by a facile one-pot hydrothermal method and employ it as a binder free electrode in supercapacitor. We coated carbon with glucose as carbon source on the surface of samples and investigated the suitable glucose concentration. The as-obtained NCC rod-like structure demonstrated great performance with a huge specific capacity of 657 C g⁻¹ at 1 A g⁻¹, preeminent rate capability of 87.7% retention, the current density varying to 10 A g⁻¹, and great cycling stability of 76.7% of its original value through 3500 cycles, which is superior to the properties of bare Ni₃S₂. The result presents a facile, general, viable strategy to constructing a high-performance material for the supercapacitor applications.

A Low-Cost and Scalable Carbon Coated SiO-Based Anode Material for Lithium-Ion Batteries

Silicon monoxide (SiO) is considered as one of the most promising alternative anode materials thanks to its high theoretical capacity, satisfying operating voltage and low cost. However, huge volume change, poor electrical conductivity, and poor cycle performance of SiO dramatically hindered its commercial application. In this work, we report an affordable and simple way for manufacturing carbon-coated SiO-C composites with good electrochemical performance on kilogram scales. Industrial grade SiO was modified by carbon coating using cheap and environment friendly polyvinyl pyrrolidone (PVP) as carbon source. High-resolution transmission electron microscopy (HRTEM) and Raman spectra results show that there is an amorphous carbon coating layer with a thickness of about 40 nm on the surface of SiO. The synthesized SiO-C-650 composite shows great electrochemical performance with a high capacity of 1491 mAh.g-1 at 0.1 C rate and outstanding capacity retention of 67.2 % after 100 cycles. The material also displays an excellent performance with a capacity of 1100 mAh.g-1 at 0.5 C rate. Electrochemical impedance spectroscopy (EIS) results also prove that the carbon coating layer can effectively improve the conductivity of the composite and thus enhance the cycling stability of SiO electrode.

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

CoSnO₃, as a high theoretical capacity electrode material (1235 mAh g^-1) for lithium storage, has been limited due to its low rate performance, huge volume expansion, and an unstable solid electrolyte interface (SEI). A rational design of the material structure including carbon coating can effectively solve the problems. To buffer the volume change and achieve a superior rate capability, hollow CoSnO_x nanocubes encapsulated in 1D N-doped carbon nanofibers (CNFs) were fabricated by electrospinning, showing a final discharge capacity of 733 mAh g^-1 with a 96% capacity retention after 800 cycles at a current rate of 1 A g^-1 and a brilliant rate performance (49% capacity maintenance with the current variation from 0.1 to 5 A g^-1). Absolutely, these outstanding characteristics are ascribed to the unique structure. The N-doped carbon fibers outside not only prevent the volume expansion during Li⁺ intercalation/extraction but also improve the electron transport in the electrode. Most significantly, the hollow structure offers enough vacant space to buffer the internal strain, while the porous structure shortens the Li⁺ diffusion distance. Combined with electrospinning technology, this study shares a novel idea for designing various composites with rational structures and outstanding electrochemical properties.

Effect of PVP Coating on LiMnBO3 Cathodes for Li-Ion Batteries

LiMnBO3 is a potential cathode for Li-ion batteries, but it suffers from a low electrochemical activity. To improve the electrochemical performance of LiMnBO3, the effect of polyvinyl pyrrolidone (PVP) as carbon additive was studied. Monoclinic LiMnBO3/C and LiMnBO3-MnO/C materials were obtained by a solid-state method at 500 °C. The structure, morphology and electrochemical behavior of these materials are characterized and compared. The results show that carbon additives and ball-milling dispersants affect the formation of impurities in the final products, but MnO is beneficial for the performance of LiMnBO3. The sample of LiMnBO3-MnO/C delivered a high capacity of 162.1 mAh g-1 because the synergistic effect of the MnO/C composite and the suppression of the PVP coating on particle growth facilitates charge transfer and lithium-ion diffusion.

New Class of Efficient T2 Magnetic Resonance Imaging Contrast Agent: Carbon-Coated Paramagnetic Dysprosium Oxide Nanoparticles

Nanoparticles are considered potential candidates for a new class of magnetic resonance imaging (MRI) contrast agents. Negative MRI contrast agents require high magnetic moments. However, if nanoparticles can exclusively induce transverse water proton spin relaxation with negligible induction of longitudinal water proton spin relaxation, they may provide negative contrast MR images despite having low magnetic moments, thus acting as an efficient T₂ MRI contrast agent. In this study, carbon-coated paramagnetic dysprosium oxide (DYO@C) nanoparticles (core = DYO = Dy_xO_y; shell = carbon) were synthesized to explore their potential as an efficient T₂ MRI contrast agent at 3.0 T MR field. Since the core DYO nanoparticles have an appreciable (but not high) magnetic moment that arises from fast 4f-electrons of Dy(III) (⁶H_15/2), the DYO@C nanoparticles exhibited an appreciable transverse water proton spin relaxivity (r₂) with a negligible longitudinal water proton spin relaxivity (r₁). Consequently, they acted as a very efficient T₂ MRI contrast agent, as proven from negative contrast enhancements seen in the in vivo T₂ MR images.

Preparations of NiFe2O4 Yolk-Shell@C Nanospheres and Their Performances as Anode Materials for Lithium-Ion Batteries

At present, lithium-ion batteries (LIBs) have received widespread attention as substantial energy storage devices; thus, their electrochemical performances must be continuously researched and improved. In this paper, we demonstrate a simple self-template solvothermal method combined with annealing for the synthesis of NiFe2O4 yolk-shell (NFO-YS) and NiFe2O4 solid (NFO-S) nanospheres by controlling the heating rate and coating them with a carbon layer on the surface via high-temperature carbonization of resorcinol and formaldehyde resin. Among them, NFO-YS@C has an obvious yolk-shell structure, with a core-shell spacing of about 60 nm, and the thicknesses of the NiFe2O4 shell and carbon shell are approximately 15 and 30 nm, respectively. The yolk-shell structure can alleviate volume changes and shorten the ion/electron diffusion path, while the carbon shell can improve conductivity. Therefore, NFO-YS@C nanospheres as the anode materials of LIBs show a high initial capacity of 1087.1 mA h g-1 at 100 mA g-1, and the capacity of NFO-YS@C nanospheres impressively remains at 1023.5 mA h g-1 after 200 cycles at 200 mA g-1. The electrochemical performance of NFO-YS@C is significantly beyond NFO-S@C, which proves that the carbon coating and yolk-shell structure have good stability and excellent electron transport ability.

Oxygen Vacancy-rich Ni/NiO@NC Nanosheets with Schottky Heterointerface for Efficient Urea Oxidation Reaction

H₂ production via electrocatalytic water splitting is greatly hindered by the sluggish oxygen evolution reaction (OER). The urea oxidation reaction (UOR) draws specific attention not only because of its lower theoretical voltage of 0.37 V compared with OER (1.23 V), but also for treating sewage water. Herein, Ni/NiO nanosheets with an ultrathin N-doped C layer containing a Schottky Ni and NiO heterointerface is constructed. Because of the self-driven charge redistribution at the heterointerface, janus charge domains are successfully created to drive the cleavage of urea molecules. Meanwhile, the synergistic effect between N-doped C and Ni/NiO restrains the deactivation of active sites in alkaline solution. The catalyst displays 1.35 V for UOR at 10 mA/cm² , 0.27 V lower than that of OER. The final potential increase is only 2 mV after long-term stability test of 12 h for UOR, much smaller than the uncoated sample (38 mV). The present work shows that C-coated transition metal nanomaterials with oxygen vacancies and a Schottky heterointerface are promising candidates for simultaneously boosting UOR with both high activity and long-term stability.

Cr2P2O7 as a Novel Anode Material for Sodium and Lithium Storage

The development of new appropriate anode material with low cost is still main issue for sodium-ion batteries (SIBs) and lithium-ion batteries (LIBs). Here, Cr2P2O7 with an in-situ formed carbon layer has been fabricated through a facile solid-state method and its storage performance in SIBs and LIBs has been reported first. The Cr2P2O7@C delivers 238 mA h g-1 and 717 mA h g-1 at 0.05 A g-1 in SIBs and LIBs, respectively. A capacity of 194 mA h g-1 is achieved in SIBs after 300 cycles at 0.1 A g-1 with a high capacity retention of 92.4%. When tested in LIBs, 351 mA h g-1 is maintained after 600 cycles at 0.1 A g-1. The carbon coating layer improves the conductivity and reduces the side reaction during the electrochemical process, and hence improves the rate performance and enhances the cyclic stability.

Complete Microbial Fuel Cell Fabrication Using Additive Layer Manufacturing

Improving the efficiency of microbial fuel cell (MFC) technology by enhancing the system performance and reducing the production cost is essential for commercialisation. In this study, building an additive manufacturing (AM)-built MFC comprising all 3D printed components such as anode, cathode and chassis was attempted for the first time. 3D printed base structures were made of low-cost, biodegradable polylactic acid (PLA) filaments. For both anode and cathode, two surface modification methods using either graphite or nickel powder were tested. The best performing anode material, carbon-coated non-conductive PLA filament, was comparable to the control modified carbon veil with a peak power of 376.7 µW (7.5 W m⁻³) in week 3. However, PLA-based AM cathodes underperformed regardless of the coating method, which limited the overall performance. The membrane-less design produced more stable and higher power output levels (520−570 µW, 7.4−8.1 W m⁻³) compared to the ceramic membrane control MFCs. As the final design, four AM-made membrane-less MFCs connected in series successfully powered a digital weather station, which shows the current status of low-cost 3D printed MFC development.

N/P-Dual-Doped Carbon-Coated Na3V2(PO4)2O2F Microspheres as a High-Performance Cathode Material for Sodium-Ion Batteries

Na₃V₂(PO₄)₂O₂F (NVPOF) is attracting great interest due to its large capacity and high working voltage. However, poor electronic conductivity limits the electrochemical performance of NVPOF. Herein, we fabricate N/P-dual-doped carbon-coated NVPOF microspheres (labeled as NVPOF@P/N/C) via a hydrothermal process followed by heat treatment. This microsphere-structured NVPOF@P/N/C composite has a relatively high tap density of 1.22 g/cm³. TEM and XPS results reveal that the dual-doped carbon layer is tightly coated on the NVPOF surface due to the bridging effect of P and has a good protective effect on NVPOF. Density functional theory (DFT) calculations confirm that a N/P-dual-doped carbon layer is advantageous to achieve higher electronic conductivity and lower migration activation energy than those of the undoped and single N- or P-doped carbon layer. As a cathode material for a sodium-ion battery (SIB), NVPOF@P/N/C exhibits high capacity (128 mAh/g at 0.5 C and 122 mAh/g at 2 C) and ultralong cycle performance (only 0.037% capacity fading rate per cycle in 500 cycles at 2 C). We believe that the NVPOF@P/N/C composite is appealing for high-performance SIBs with large energy density.

Surfactant-Mediated and Morphology-Controlled Nanostructured LiFePO4/Carbon Composite as a Promising Cathode Material for Li-Ion Batteries

The synthesis of morphology-controlled carbon-coated nanostructured LiFePO4 (LFP/Carbon) cathode materials by surfactant-assisted hydrothermal method using block copolymers is reported. The resulting nanocrystalline high surface area materials were coated with carbon and designated as LFP/C123 and LFP/C311. All the materials were systematically characterized by various analytical, spectroscopic and imaging techniques. The reverse structure of the surfactant Pluronic® 31R1 (PPO-PEO-PPO) in comparison to Pluronic® P123 (PEO-PPO-PEO) played a vital role in controlling the particle size and morphology which in turn ameliorate the electrochemical performance in terms of reversible specific capacity (163 mAh g-1 and 140 mAh g-1 at 0.1 C for LFP/C311 and LFP/C123, respectively). In addition, LFP/C311 demonstrated excellent electrochemical performance including lower charge transfer resistance (146.3 Ω) and excellent cycling stability (95 % capacity retention at 1 C after 100 cycles) and high rate capability (163.2 mAh g-1 at 0.1 C; 147.1 mAh g-1 at 1 C). The better performance of the former is attributed to LFP nanoparticles (<50 nm) with a specific spindle-shaped morphology. Further, we have also evaluated the electrode performance with the use of both PVDF and CMC binders employed for the electrode fabrication.

Elucidating and Mitigating the Degradation of Cationic-Anionic Redox Processes in Li1.2Mn0.4Ti0.4O2 Cation-Disordered Cathode Materials

Cation-disordered rock-salt oxides with the O^2-/O₂^n- redox reaction, such as Li_1.2Mn_0.4Ti_0.4O₂ (LMTO), are critical Li-rich cathode materials for designing high-energy-density batteries. Understanding the cationic-anionic redox accompanying the structural evolution process is really imperative to further improve the performance. In this work, the cationic-anionic redox and capacity degradation mechanism of carbon-coated LMTO during (dis)charge processes are elucidated by combining in situ X-ray diffraction, X-ray absorption near-edge spectroscopy, differential electrochemical mass spectrometry, transmission electron microscopy, and electrochemical analyses. It is concluded that the redox reaction of Mn²⁺/Mn⁴⁺ is quite stable, while the severe degradation is mainly caused by the O^2-/O₂^n- redox process. Moreover, we clearly clarify how the cationic-anionic interplay governs sluggish kinetics, large polarization, and capacity fading in LMTO, and reveal for the first time that a certain amount of carbon coating is capable of suppressing the irreversible lattice oxygen loss and results in an encouraging cycling performance. In summary, we elucidate the degradation of cationic-anionic redox processes in cation-disordered cathode materials and propose strategies for adjusting the electronic/ionic conductivity of the electrodes to modulate the oxygen redox reactions, setting a new direction for the design of better cation-disordered oxides.

Enhanced Visible-Light Photocatalytic Activity of Ag QDs Anchored on CeO2 Nanosheets with a Carbon Coating

Ag quantum dots (QDs) anchored on CeO₂ nanosheets with a carbon coating (Ag/CeO₂@C) (composites) were prepared via an in situ reduction approach for the photocatalytic degradation of Cr(VI) and tetracycline hydrochloride (TCH) in the visible-light region. The photocatalytic activity of Ag/CeO₂@C was greatly affected by carbon content, Ag-doping content, Cr(VI) concentration, pH value, and inorganic ions. Enhanced photocatalytic activity was obtained by Ag/CeO₂@C (compared to CeO₂ and CeO₂@C), of which 3-Ag/CeO₂@C-2 with an Ag-doping content of 5.41% presented the best removal efficiency and the most superior stability after five cycles. ·O₂⁻ and ·OH radicals were crucial for the photocatalytic capacity of 3-Ag/CeO₂@C-2. The combined effect of the surface plasma resonance (SPR) of Ag QDs, an electron trapper of carbon shells, and the redox activity of the Ce(III)/Ce(IV) coupling induced efficient charge transfer and separation, suppressing the recombination of electron–hole pairs.

Highly Electrochemically-Reversible Mesoporous Na2 FePO4 F/C as Cathode Material for High-Performance Sodium-Ion Batteries

As promising cathode materials, iron-based phosphate compounds have attracted wide attention for sodium-ion batteries due to their low cost and safety. Among them, sodium iron fluorophosphate (Na₂ FePO₄ F) is widely noted due to its layered structure and high operating voltage compared with NaFePO₄ . Here, a mesoporous Na₂ FePO₄ F@C (M-NFPF@C) composite derived from mesoporous FePO₄ is synthesized through a facile ball-milling combined calcination method. Benefiting from the mesoporous structure and highly conductive carbon, the M-NFPF@C material exhibits a high reversible capacity of 114 mAh g^-1 at 0.1 C, excellent rate capability (42 mAh g^-1 at 10 C), and good cycling performance (55% retention after 600 cycles at 5 C). The high plateau capacity obtained (>90% of total capacity) not only shows high electrochemical reversibility of the as-prepared M-NFPF@C but also provides high energy density, which mainly originates from its mesoporous structure derived from the mesoporous FePO₄ precursor. The M-NFPF@C serves as a promising cathode material with high performance and low cost for sodium-ion batteries.

Thickness of carbon coatings on silicon materials determined by hard X-ray photoelectron spectroscopy at multiple photon energies

Hard X-ray photoelectron spectroscopy at multiple photon energies is used to investigate the surface structure of carbon coatings on silicon materials destined for use as negative electrodes in lithium-ion batteries. The photoelectron intensity from the carbon coatings decreases with an increase in the kinetic energy of the photoelectron. By fitting the photoelectron intensity versus energy to numerically derived curves, the thickness and coverage of the carbon coatings can be obtained. The results are in agreement with the values suggested by the cross-sectional secondary-electron microscopy images of the carbon coatings, although the thickness should be corrected by accounting for the rectangular parallelepiped structure of the silicon material.

Preparation and Tribological Properties of Carbon-Coated WS2 Nanosheets

WS₂-C is produced from a hydrothermal reaction, in which WS₂ nano-sheets are coated with carbon, using glucose as the carbon source. In order to investigate the tribological properties of WS₂-C as a lubricant additive, WS₂-C was modified by surfactant Span80, and friction tests were carried out on an MRS-10A four-ball friction and wear tester. The results show that Span80 can promote the dispersibility of WS₂-C effectively in base oil. Adding an appropriate concentration of WS₂-C can improve the anti-wear and anti-friction performance of the base oil. The friction coefficient reached its lowest point upon adding 0.1 wt % WS₂-C, reduced by 16.7% compared to the base oil. Meanwhile, the wear scar diameter reached its minimum with 0.15 wt % WS₂, decreasing by 26.45%. Moreover, at this concentration, the depth and width of the groove and the surface roughness on the wear scar achieved their minimum. It is concluded that WS₂-C dispersed in oil could enter friction pairs to avoid their direct contact, thereby effectively reducing friction and wear. At the same time, WS₂-C reacts with the friction matrix material to form a protective film, composed of C, Fe₂O₃, FeSO₄, WO₃, and WS₂, repairing the worn surface.

Mechanism Study of Carbon Coating Effects on Conversion-Type Anode Materials in Lithium-Ion Batteries: Case Study of ZnMn2O4 and ZnO-MnO Composites

The carbon coating strategy is intensively used in the modification of conversion-type anode materials to improve their cycling stability and rate capability. Thus, it is necessary to elucidate the modification mechanism induced by carbon coating. For this purpose, bare ZnMn₂O₄, carbon-derivative-coated ZnMn₂O₄, and carbon-coated ZnO-MnO composite materials have been synthesized and investigated in-depth. Herein, high-temperature synchrotron radiation diffraction is used to monitor the phase transition from ZnMn₂O₄ to ZnO-MnO composite during the carbonization process. The electrochemical performance has been evaluated by cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The carbon- and carbon-derivative-coated samples display well-improved cycling stability in terms of suppressed electrode polarization, a moderate increase in resistance, and slight capacity variation. The influence of carbon coating on the intrinsic conversion process is investigated by ex situ X-ray absorption spectroscopy, which reveals the evolution of Zn and Mn oxidation states. This result confirms that the strong capacity variation of the bare ZnMn₂O₄ is induced not only by the reversible charge storage in the solid electrolyte interphase but also by the phase evolution of active materials. Carbon coating is an effective method to prevent the additional oxidation of MnO to Mn₃O₄, which leads to a stabilization of the main conversion reaction.

Tailoring the Assembly of Iron Nanoparticles in Carbon Microspheres toward High-Performance Electrocatalytic Denitrification

Electrocatalytic denitrification is considered as the most promising technology to transform nitrates to nitrogen gas in sewage so far. Although noble metal-based catalysts as a cathode material have reached decent removal capacity of nitrate, the high cost is the main hamper of electrocatalytic reduction. Therefore, the development of alternative catalysis toward highly effective denitrification is imperative yet still remains a significant challenge. Herein, a corchorifolius-like structure, where Fe nanoparticles are sealed in carbon microspheres (CL-Fe@C) with a rough surface, has been elaborately designed by self-assemble strategy. Impressively, the architectured CL-Fe@C microspheres are surrounded with a lot of small iron nanoparticles and contain the high iron content of ∼74%. As a result, an excellent removal capacity of 1816 mg N/g Fe and a high nitrogen selectivity of 98% under a very low nitrate concentration of 100 mg/L are achieved when using the CL-Fe@C microspheres as electrocatalytic denitrification. The present work not only explores high performance electrocatalysis for the denitrification but also promote new inspiration for the preparation of other iron-based functional materials for diverse applications.