Rational Construction of C@Sn/NSGr Composites as Enhanced Performance Anodes for Lithium Ion Batteries

As a potential anode material for lithium-ion batteries (LIBs), metal tin shows a high specific capacity. However, its inherent "volume effect" may easily turn tin-based electrode materials into powder and make them fall off in the cycle process, eventually leading to the reduction of the specific capacity, rate and cycle performance of the batteries. Considering the "volume effect" of tin, this study proposes to construct a carbon coating and three-dimensional graphene network to obtain a "double confinement" of metal tin, so as to improve the cycle and rate performance of the composite. This excellent construction can stabilize the tin and prevent its agglomeration during heat treatment and its pulverization during cycling, improving the electrochemical properties of tin-based composites. When the optimized composite material of C@Sn/NSGr-7.5 was used as an anode material in LIB, it maintained a specific capacity of about 667 mAh g^-1 after 150 cycles at the current density of 0.1 A g^-1 and exhibited a good cycle performance. It also displayed a good rate performance with a capability of 663 mAh g^-1, 516 mAh g^-1, 389 mAh g^-1, 290 mAh g^-1, 209 mAh g^-1 and 141 mAh g^-1 at 0.1 A g^-1, 0.2 A g^-1, 0.5 A g^-1, 1 A g^-1, 2 A g^-1 and 5 A g^-1, respectively. Furthermore, it delivered certain capacitance characteristics, which could improve the specific capacity of the battery. The above results showed that this is an effective method to obtain high-performance tin-based anode materials, which is of great significance for the development of new anode materials for LIBs.

In Situ Fabrication of Highly Dispersed Co-Fe-Doped-δ-MnO2 Catalyst by a Facile Redox-Driving MOFs-Derived Method for Low-Temperature Oxidation of Toluene

Cost-efficient and durable manganese-based catalysts are in great demand for the catalytic elimination of volatile organic compounds (VOCs), which are dominated not only by the nanostructures but also by the oxygen vacancies and Mn-O bond in the catalysts. Herein, a series of nanostructured Co-Fe-doped-δ-MnO₂ catalysts (Co-Fe-δ-MnO₂) with high dispersion were in situ fabricated by employing metal-organic-frameworks (MOFs) as reducing agents, dopants, and templates all at the same time. The as-obtained Co-Fe-δ-MnO₂-20% catalyst exhibited robust durability and high catalytic activity (225 °C) for toluene combustion even in the presence of 5 vol % water vapor, which is 50 °C lower than that of pristine δ-MnO₂. Various characterizations revealed that the homogeneously dispersed codoping of Co and Fe ions into δ-MnO₂ promotes the generation of oxygen vacancies and weakens the strength of the Mn-O bond, thus increasing the amount of adsorbed oxygen (O_ads) and improving the mobility of lattice oxygen (O_latt). Meanwhile, due to successfully inheriting the framework structures of MOFs, the obtained catalyst exhibited a high surface area and three-dimensional mesoporous structure, which contributes to diffusion and increases the number of active sites. Moreover, in situ DRIFTS results confirmed that the toluene degradation mechanism on the Co-Fe-δ-MnO₂-20% follows the MVK mechanism and revealed that more O_ads and high-mobility O_latt induced by this novel method contribute to accumulating and mineralizing key intermediates (benzoate) and thus promote toluene oxidation. In conclusion, this work stimulates the opportunities to develop Co-Fe-δ-MnO₂ as a class of nonprecious-metal-based catalysts for controlling VOC emissions.

Sub-Second Joule-Heated RuO2-Decorated Nitrogen- and Sulfur-Doped Graphene Fibers for Flexible Fiber-type Supercapacitors

Graphene-based fiber-shaped supercapacitors (FSSCs) have received considerable attention as potential wearable energy storage devices owing to their simple operating mechanism, flexibility, and long-term stability. To date, energy storage capacities of supercapacitors have been significantly improved via strategies such as heteroatom doping and the incorporation of pseudocapacitive metal oxides. Herein, we develop a novel and scalable direct-hybridization method that combines heteroatom doping and metal oxide hybridization for the fabrication of high-performance FSSCs. Using porous and highly conductive nitrogen and sulfur co-doped graphene fibers (NS-GFs) as self-heating units, we successfully convert ruthenium hydroxide anchored to the surface into ruthenium oxide nanoparticles after programmed sub-second electrothermal annealing without structural damage of the fibers. The resulting fibers show an increased gravimetric capacitance of 68.88 F g^-1 compared to that of the pristine NS-GF (8.32 F g^-1), excellent cyclic stability maintaining 96.67% of the initial capacitance after 20 000 continuous charging/discharging cycles, and good mechanical flexibility. The findings of this work advocate a successful Joule heating strategy for preparing high-performance graphene-based metal oxide hybrid FSSCs for use in energy storage applications.

Multi-Elemental Electronic Coupling for Enhanced Hydrogen Generation

A robust polyaniline-assisted strategy is developed to construct a self-supported electrode constituting a nitrogen, phosphorus, sulfur tri-doped thin graphitic carbon layer encapsulated sulfur-doped molybdenum phosphide nanosheet array (NPSCL@S-MoP NSs/CC) with accessible nanopores, desirable chemical compositions, and stable composite structure for efficient hydrogen evolution reaction (HER). The multiple electronic coupling effects of S-MoP with N, P, S tri-dopants afford effective regulation on their electrocatalytic performance by endowing abundant accessible active sites, outstanding charge-transfer property, and d-band center downshift with a thermodynamically favorable hydrogen adsorption free energy (ΔG_H* ) for efficient hydrogen evolution catalysis. As a result, the NPSCL@S-MoP NSs/CC electrode exhibits overpotentials as low as 65, 114, and 49 mV at a geometric current density of 10 mA cm^-2 and small Tafel slopes of 49.5, 69.3, and 53.8 mV dec^-1 in 0.5 m H₂ SO₄ , 1.0 m PBS, and 1.0 m KOH, respectively, which could maintain 50 h of stable performance, almost outperforming all MoP-based catalysts reported so far. This study provides a valuable methodology to produce interacted multi-heteroatomic doped graphitic carbon-transition metal phosphide electrocatalysts with superior HER performance in a wide pH range.

Boosting the Potassium-Ion Storage Performance in Soft Carbon Anodes by the Synergistic Effect of Optimized Molten Salt Medium and N/S Dual-Doping

Soft carbon is attracting tremendous attention as a promising anode material for potassium-ion batteries (PIBs) because of its graphitizable structure and adjustable interlayer distance. Herein, nitrogen/sulfur dual-doped porous soft carbon nanosheets (NSC) have been prepared with coal tar pitch as carbon precursors in an appropriate molten salt medium. The molten salt medium and N/S dual-doping are responsible for the formation of nanosheet-like morphology, abundant microporous channels with a high surface area of 436 m² g^-1, expanded interlamellar spacing of 0.378 nm, and enormous defect-induced active sites. These structural features are crucial for boosting potassium-ion storage performance, endowing the NSC to deliver a high potassiation storage capacity of 359 mAh g^-1 at 100 mA g^-1 and 115 mAh g^-1 at 5.0 A g^-1, and retaining 92.4% capacity retention at 1.0 A g^-1 after 1000 cycles. More importantly, the pre-intercalation of K atom from the molten salts helps improve the initial Coulombic efficiency to 50%, which outperforms those of the recently reported carbon anode materials with large surface areas. The density functional theory calculations further illuminate that the N/S dual-doping can facilitate the adsorption of K-ion in carbon materials and decrease the ion diffusion energy barrier during the solid-state charge migration.