Nature-inspired CaCO3 loading TiO2 composites for efficient and durable photocatalytic mineralization of gaseous toluene

Nickel atoms of nickel foam simultaneously mediated charge redistribution and firm immobilization of zinc oxide for safe and efficient photocatalytic nitrogen oxide removal

Photocatalytic technology has emerged as a promising solution for air purification of ppb-level nitrogen oxides (NOx), but potential risk of secondary pollution should not be overlooked, which could be triggered by the production of toxic intermediate and the potential release of airborne catalyst particles during reaction processes. Herein, nickel foam (NF) has been introduced as not only carrier material but also performance promoter for zinc oxide (ZnO). The NF supported ZnO sample (Ni-ZnO/NF) demonstrates multifunctional superiority: 66.4 % nitric oxide (NO) removal efficiency, <1.7 % nitrogen dioxide (NO2) byproduct generation, and ultralow photocatalyst loss (<1.2 % mass). Mechanistic investigations combining experimental characterization and theoretical simulations reveal atomic substitution processes where NF-derived Ni atoms replace Zn sites in the ZnO lattice, forming stable Ni-O interfacial bonds, which contributes to enhance interaction between ZnO and NF for firm immobilization and form electron localization zones around Ni-O bond for reactants activation and reactive oxygen species formation. The optimized reaction pathway (NO + e- → NO-, NO- + 1O2 → NO3-) ensures complete oxidation while suppressing hazardous intermediates. This work blueprints next-generation supported photocatalysts through atomic-level interface engineering, advancing practical application of photocatalytic technology for sustainable air purification.

Tuning the metal-support interactions in titanium dioxide-supported palladium photocatalysts against toluene in air

The activity of supported noble metal (e.g., palladium (Pd)) catalysts is often governed by the combined effects of multiple factors (e.g., electronic and geometric properties of the support, surface chemistry of metal nanoparticles (NPs), and metal-support interactions). Pd/titanium dioxide (TiO2) catalyst has been developed as a highly efficient photocatalytic degradation (PCD) system against gaseous toluene based on high-temperature pretreatment (300 and 450 °C) in a mixed stream of hydrogen (H2) and (N2). The interaction of Pd NPs with TiO2 synergistically improves the PCD efficiency of toluene through the efficient adsorption and activation of toluene as well as molecular oxygen (O2) and water (H2O) for the facile generation of reactive oxygen species (ROS (e.g., superoxide anion (•O2-) and hydroxyl (•OH) radicals)). The PCD efficiency of the prepared sample against 5 ppm toluene (at 20% relative humidity (RH)) is 79.6% with the values of maximum reaction rate, quantum yield, space-time yield, and clean air delivery rate as 9.9 μmol g-1 h-1, 1.68E-03 molecules photon-1, 1.68E-02 molecules photon-1 g-1, and 4.8 L h-1, respectively. Based on this research, the PCD mechanism of gaseous toluene has been explored along with the dynamic behavior of O2 and H2O for ROS generation and their relative contribution to the PCD of toluene. As such, this research offers a perspective for designing advanced photocatalysts through surface defect engineering.

Facile synthesis of activated carbon/titanium dioxide composite and its application for adsorptive/photocatalytic removal of gaseous toluene

The practical utility of activated carbon/titanium dioxide (AC/TiO2) composite has been investigated for the abatement of a common aromatic volatile organic compound (VOC), toluene. The adsorption and photocatalytic performance of the prepared AC/TiO2 composites (ACT-x: x as the theoretical mass ratio (in percent) of AC over TiO2 ranging from 0% to 10%) is evaluated individually against gaseous toluene using a packed flow tube reactor under varying operational conditions (e.g., relative humidity and gaseous pollutant composition). The presence of AC in the composite significantly increases the adsorption capacity (Q) such as 1.71 mg g-1 for ACT-10 relative to 0.01 mg g-1 for ACT-0. The ACT-5, with 3.6% C, exhibits the maximum photocatalytic removal efficiency (XT = 93.77%), quantum efficiency (QE; 1.63 × 10-4 molecules photon-1), space time yield (STY; 1.99 × 10-5 molecules photon-1 mg-1), and specific clear air delivery rate (SCADR; 686.2 L h-1 g-1) among all the ACT compositions tested. ACT-5 exhibits enhanced potential for adsorption and in-situ degradation-desorption to facilitate the removal of VOCs with the reduced yield of by-products. The in-situ diffuse reflectance infrared Fourier transform spectroscopy and gas chromatography-mass spectrometry analyses indicate the formation of several intermediate by-products during the photocatalytic degradation process, including benzyl alcohol, benzaldehyde, benzoic acid, phenol, and alkane species. In addition, the photocatalytic performance of ACT is demonstrated to be superior to those of other TiO2-based photocatalysts. Accordingly, the ACT composite is recommended as a promising medium for the abatement of aromatic VOCs in indoor air.

Pt position determining efficiency and stability for photocatalytic toluene degradation over Pt decorated TiO2

Highly durable photocatalytic degradation of gas toluene pollutants is a great challenge due to the easy deactivation of photocatalysts. Herein, we synthesized the Pt embedded at interface of TiO2 nanocomposites (TiO2/Pt/TiO2) and Pt exposed on the surface of TiO2 nanocomposites (Pt/TiO2/TiO2) to investigate the effect of Pt position on the photocatalytic performance of toluene degradation. It was found that the Pt-exposed samples showed inactivation as the reaction progressed because carbonaceous intermediates such as phenol and benzoic acid were observed to be deposited on the exposed Pt to restrain the role of Pt in electron transfer for the production of reactive oxygen species. Whereas, Pt-embedded nanocomposites had excellent activity and stability for toluene degradation and CO2 production more than 60 h. This was attributed to the protective effect of the TiO2 outerlayer. The embedded Pt was not easily poisoned by the degradation intermediates, resulting in a good electron transfer and the continuous production of reactive oxygen species for photocatalytic reaction. Therefore, this work provides an efficient approach for designing of the stability of metal-decorated photocatalyst for the highly durable photocatalytic performance.

Spatial interfacial heterojunctions of TiO2 for photocatalytic degradation of toluene: Effects of interface amorphous region and oxygen vacancy

The catalytic activity of TiO2 is contingent upon its crystal structure and the optoelectronic properties associated with defects. In this study, a one-step method was used to synthesize TiO2 with a spatial interface of rutile/anatase phases, and a simple thermal annealing process was applied to optimize the amorphous regions and oxygen vacancies at the interface between the rutile and anatase phases of TiO2. High-resolution transmission electron microscopy (HRTEM) elucidates the evolution process of the amorphous domain at the interface, skillfully introducing oxygen vacancies at the heterojunction interface by modulating the amorphous domain. The obtained photocatalyst (TiO2-350 °C) after annealing exhibits an optimal interface structure, with its photocatalytic activity and stability in degrading toluene far superior to P25. Photocurrent and photoluminescence (PL) measurements affirm that the existence of interfacial oxygen vacancies heightens the efficiency of electron transfer at the interface, while surface oxygen vacancies significantly enhance the stability and mineralization rate of toluene degradation. The improved photocatalytic properties were attributed to the combined effects of surface/interface oxygen vacancies and spatial interface heterojunctions. The one-step synthesis method developed in this work provides a novel perspective on combining spatially interfaced anatase/rutile phases with surface/interfacial oxygen vacancies.

TiO2/Loofah-Halloysite Bio-Hybrid Composites as Efficient Systems for VOCs Removal

Volatile organic compounds (VOCs), recognized as hazardous air contaminants, prompt the exploration of sustainable air purification methods. Solar photocatalytic oxidation emerges as a promising solution, utilizing semiconductor photocatalysts like titanium dioxide (TiO2). However, the raw material crisis necessitates reduced TiO2 usage, leading to investigations into TiO2 modification techniques. The study introduces a novel approach by employing natural fibers, specifically loofah sponge, as a TiO2 support. This method aims to maintain photocatalytic activity while minimizing TiO2 content. The article explores using halloysite, a natural clay mineral, as a supportive material, enhancing mechanical strength and adsorption properties. The resulting TiO2/loofah-halloysite composites are evaluated for their efficacy in gas-phase photocatalytic oxidation of toluene and ethanol, chosen as representative VOCs. The conversion of toluene and ethanol on the composite was 88 % and 39 %, respectively, with high selectivity toward CO2. In addition to its high performance, the bio-composite was stable for several conversion cycles, keeping the conversion activity unchanged. The study contributes to developing green hybrid materials for VOC removal, showcasing potential applications across industries.

Surface Hydroxyl and Oxygen Vacancies Engineering in ZnSnAl LDH: Synergistic Promotion of Photocatalytic Oxidation of Aromatic VOCs

Photocatalytic oxidation has gained great interest in environmental remediation, but it is still limited by its low efficiency and catalytic deactivation in the degradation of aromatic VOCs. In this study, we concurrently regulated the surface hydroxyl and oxygen vacancies by introducing Al into ZnSn layered double hydroxide (LDH). The presence of distorted Al species induced local charge redistribution, leading to the remarkable formation of oxygen vacancies. These oxygen vacancies subsequently increased the amount of surface hydroxyl and elongated its bond length. The synergistic effects of surface hydroxyl and oxygen vacancies greatly enhanced reactant adsorption-activation and facilitated charge transfer to generate •OH, •O2-, and 1O2, resulting in highly efficient oxidation and ring-opening of various aromatic VOCs. Compared with commercial TiO2, the optimized ZnSnAl-50 catalyst exhibited about 2-fold activity for the toluene and styrene degradation and 10-fold activity for the chlorobenzene degradation. Moreover, ZnSnAl-50 demonstrated exceptional stability in the photocatalytic oxidation of toluene under a wide humidity range of 0-75%. This work marvelously improves the photocatalytic efficiency, stability, and adaptability through a novel strategy of surface hydroxyl and oxygen vacancies engineering.

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

One of the main gaseous pollutants released by chemical production industries are benzene, toluene and xylene (BTX). These dangerous gases require immediate technology to combat them, as they put the health of living organisms at risk. The development of heterogeneous photocatalytic oxidation technology offers several viewpoints, particularly in gaseous-phase decontamination without an additional supply of oxidants in air at atmospheric pressure. However, difficulties such as low quantum efficiency, ability to absorb visible light, affinity towards CO2 and H2O synthesis, and low stability continue to limit its practical use. This review presents recent advances in dry-phase heterogeneous photodegradation as an advanced technology for the practical removal of BTX molecules. This review also examines the impact of low-cost light sources, the roles of the active sites of photocatalysts, and the feasible concentration range of BTX molecules. Numerous studies have demonstrated a significant improvement in the efficiency of the photodegradation of volatile organic compounds by enhancing the photocatalytic reactor system and other factors, such as humidity, temperature, and flow rate. The mechanism for BTX photodegradation based on density functional theory (DFT), electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations is also discussed. Finally, the present research complications and anticipated future developments in the field of heterogeneous photocatalytic oxidation technology are discussed.

Anti-Environmental Aging Passive Daytime Radiative Cooling

Passive daytime radiative cooling technology presents a sustainable solution for combating global warming and accompanying extreme weather, with great potential for diverse applications. The key characteristics of this cooling technology are the ability to reflect most sunlight and radiate heat through the atmospheric transparency window. However, the required high solar reflectance is easily affected by environmental aging, rendering the cooling ineffective. In recent years, significant advancements have been made in understanding the failure mechanisms, design strategies, and manufacturing technologies of daytime radiative cooling. Herein, a critical review on anti-environmental aging passive daytime radiative cooling with the goal of advancing their commercial applications is presented. It is first introduced the optical mechanisms and optimization principles of radiative cooling, which serve as a basis for further endowing environmental durability. Then the environmental aging conditions of passive daytime radiative cooling, mainly focusing on UV exposure, thermal aging, surface contamination and chemical corrosion are discussed. Furthermore, the developments of anti-environmental aging passive daytime radiative cooling materials, including design strategies, fabrication techniques, structures, and performances, are reviewed and classified for the first time. Last but not the least, the remaining open challenges and the insights are presented for the further promotion of the commercialization progress.

A WO3-TiO2 nanorod/CaCO3 photocatalyst with degradation-regeneration double sites for NO2-inhibited and durable photocatalytic NO

As a promising cleaner technology for nitric oxide degradation, photocatalysis has attracted extensive attention, while the main limitations of photocatalytic nitric oxide are that the toxic NO₂ is produced easily and the photocatalytic durability was inferior due to the accumulation of photocatalytic products. In this paper, a WO₃-TiO₂ nanorod/CaCO₃ (TCC) insulating heterojunction photocatalyst with degradation-regeneration double sites was prepared by simple grinding and calcining. The effects of CaCO₃ loading on the morphology, microstructure and composition of TCC photocatalyst were investigated by SEM, TEM, XRD, FT-IR and XPS etc. Also, TCC exhibits NO₂-inhibited and durable characteristics for NO degradation. DFT calculation, the detection of active radicals by EPR, capture test and the NO degradation pathway characterized by in-situ FT-IR spectra showed that the electron-rich region formed and the existence of regeneration sites are the main reasons for promoting the NO₂-inhibited and durable NO degradation. Furthermore, the mechanism of NO₂-inhibited and durable NO degradation by TCC was revealed. Finally, TCC superamphiphobic photocatalytic coating was prepared, which still exhibits similar NO₂-inhibited and durable characteristics for NO degradation to TCC photocatalyst. It may provide new application value and development prospects in the field of photocatalytic NO.

Synergistic effect of cyano defects and CaCO3 in graphitic carbon nitride nanosheets for efficient visible-light-driven photocatalytic NO removal

Photo-oxidation with semiconductor photocatalysts provides a sustainable and green solution for NO_x elimination. Nevertheless, the utilization of traditional photocatalysts in efficient and safe photocatalytic NO_x removal is still a challenge due to the slow charge kinetic process and insufficient optical absorption. In this paper, we report a novel porous g-C₃N₄ nanosheet photocatalyst modified with cyano defects and CaCO₃ (xCa-CN). The best performing sample (0.5Ca-CN) exhibits an enhanced photo-oxidation NO removal rate (51.18 %) under visible light irradiation, largely surpassing the value of pristine g-C₃N₄ nanosheets (34.05 %). Such an enhancement is mainly derived from an extended visible-light response, improved electron excitation and transfer, which are associated with the synergy of cyano defects and CaCO₃, as evidenced by a series of spectroscopic analyses. More importantly, in-situ DRIFTS and density functional theory (DFT) results suggest that the introduction of cyano defects and CaCO₃ enables control over NO adsorption and activation processes, making it possible to implement a preference pathway (NO → NO⁺ → NO₃¯) and reduce the emission of toxic intermediate NO₂. This work demonstrates the potential of integrating defect engineering and insulator modification to design highly efficient g-C₃N₄-based photocatalysts for air purification.

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.

Designing waste Bioresource-derived value-added Nanohybrids for efficient photocatalysis water treatment

Although photocatalysis with ultraviolet-visible (UV-vis) light has made considerable advances, it is limited by the low efficiency of UV-vis energy conversion. To overcome this problem, UV-vis light can be replaced with near-infrared (NIR) light. Herein, we coupled eggshell-derived CaCO₃ with a NIR-absorbing CuSe semiconductor and fabricated an insulator-based heterojunction structure. In application case studies of 4-nitrophenol (4-NP) and bacteria, the nanocomposites showed enhanced photocatalysis activity under NIR light induction. A first-principles calculation indicated that photoexcited electrons could transfer from the conduction band of CuSe to the conduction band of CaCO₃. The main reactive species generated by the photocatalysis were ·CO₃^-, and ·OH free radicals. The antibacterial mechanisms of photocatalysis on the cell permeability and DNA layers of the bacterial cells were also revealed. Besides providing novel perspectives and mechanistic understanding of the fabrication of NIR light-driven photocatalysts, this study demonstrates the valorization of eggshell bio-wastes in environmental remediation.

Durable radiative cooling against environmental aging

To fight against global warming, subambient daytime radiative cooling technology provides a promising path to meet sustainable development goals. To achieve subambient daytime radiative cooling, the reflection of most sunlight is the essential prerequisite. However, the desired high solar reflectance is easily dampened by environmental aging, mainly natural soiling and ultraviolet irradiation from sunlight causing yellowish color for most polymers, making the cooling ineffective. We demonstrate a simple strategy to use titanium dioxide nanoparticles, with ultraviolet resistance, forming hierarchical porous morphology via evaporation-driven assembly, which guarantees a balanced anti-soiling and high solar reflectance, rendering anti-aging cooling paint based coatings. We challenge the cooling coatings in an accelerated weathering test against simulated 3 years of natural soiling and simulated 1 year of natural sunshine, and find that the solar reflectance only declined by 0.4% and 0.5% compared with the un-aged ones. We further show over 6 months of aging under real-world conditions with barely no degradation to the cooling performance. Our anti-aging cooling paint is scalable and can be spray coated on desired outdoor architecture and container, presenting durable radiative cooling, promising for real-world applications.

Solar heterogeneous photocatalytic degradation of phenol on TiO2/quartz and TiO2/calcite: a statistical and kinetic approach on comparative efficiencies towards a TiO2/glass system

Phenol is a widely used synthetic organic compound, which according to global estimations, is discharged into the environment at a rate of 10 tons/year through industrial waste. Phenol is a recalcitrant pollutant, and human exposure to water containing phenolic substances can lead to health issues. It has been found both in drinking water and wastewater. Solar heterogeneous photocatalytic phenol degradation, measured through chemical oxygen demand, was performed on a thin film tilted plate reactor with TiO₂ immobilized onto different support materials. A full factorial experimental design (4 × 3 × 3) was carried out to statistically evaluate if the independent variables' effects were significant. Four advanced oxidation processes (photolysis, photolysis + H₂O₂, heterogeneous photocatalysis, and heterogeneous photocatalysis + H₂O₂), three support materials (quartz, calcite, and glass), and three pH levels (3, 5.4, and 9) were evaluated. Reaction kinetics were fitted to the pseudo-first-order reaction rate and data was analyzed with an ANCOVA and means test, considering solar light intensity as a covariate. Photolysis/calcite at pH 5.4 and heterogeneous photocatalysis + H₂O₂/glass plate at pH 3 gave the best results, with a reaction rate constant k_ph = 3.047 × 10^-3 min^-1 and k_phC = 4.498 × 10^-3 min^-1, respectively. The three independent variables and their interactions had a significant effect in the phenol degradation (p < 0.05).

Photocatalytic destruction of volatile aromatic compounds by platinized titanium dioxide in relation to the relative effect of the number of methyl groups on the benzene ring

The photocatalytic destruction (PCD) of volatile organic compounds (VOC) into environmentally benign compounds is one of the most ideal routes for the management of indoor air quality. It is nevertheless not easy to achieve the mineralization of aromatic VOC through PCD technology because of their recalcitrant structures (i.e., conjugated π benzene ring). In this research, the PCD potential against three model aromatic hydrocarbons (i.e., benzene (B), toluene (T), and m-xylene (X): namely, BTX) has been explored using a titanium dioxide (TiO₂) supported platinum (Pt) catalyst after the high-temperature hydrogen (H₂)-based reduction (R) pre-treatment (i.e., Pt/TiO₂-R). The effects of the key process variables (e.g., relative humidity (RH), oxygen (O₂) content, flow rate, VOC concentration, and the co-presence of VOC) on the PCD efficiency and related mechanisms were also assessed in detail. The PCD efficiency is seen to increase with the rise in the increasing number of methyl groups on the benzene ring (in the order of benzene (46.5%), toluene (68.2%), and m-xylene (95.9%)), as the adsorption and activation of the VOC molecule on the photocatalyst surface are promoted by the increased distribution of electrons on the benzene ring. The BTX were oxidated subsequently by the photogenerated reactive oxygen species (ROS), i.e., the hydroxyl radicals (•OH) and superoxide anion radicals (•O₂^-). The overall results of this study are expected to help expand the applicability of photocatalysis towards air quality management by offering detailed insights into the factors and processes governing the photocatalytic decomposition of aromatic VOCs.

Oxygen Isotope Tracing Study to Directly Reveal the Role of O2 and H2O in the Photocatalytic Oxidation Mechanism of Gaseous Monoaromatics

O₂ and H₂O influence the photocatalytic oxidation mechanism of gaseous monoaromatics, but still in an unclear manner, due to the lack of direct evidence. Tracing an oxygen atom from ¹⁶O₂ and H₂¹⁸O to intermediates can clarify their roles. The low H₂¹⁸O content suppressed the formation of benzenedicarboxaldehydes during the oxidation of xylenes and ¹⁶O₂ greatly affected the yield of total intermediates, while neither of them altered the percentage order of the products. Methylbenzaldehydes, methylbenzyl alcohols, and benzenedicarboxaldehydes possessed greater ¹⁶O percentage (≥69.49%), while higher ¹⁸O distribution was observed in methylbenzoic acids and phthalide (≥59.51%). Together with the interconversion results of the products revealed, ¹⁶O₂ determined the transformation of xylenes initially to methylbenzaldehydes and then to methylbenzyl alcohols or benzenedicarboxaldehydes, while H₂¹⁸O mainly contributed to conversion of methylbenzaldehydes to methylbenzoic acids or phthalide. Further interaction sites of xylene and its products with H₂O and O₂ were confirmed by molecular dynamics calculations. The same roles of ¹⁶O₂ and H₂¹⁸O in the degradation of toluene, ethylbenzene, 1,2,4-trimethylbenzene, and 1,3,5-trimethylbenzene were also verified. This is the first report that provides direct evidence for the roles of O₂ and H₂O in the photocatalytic oxidation mechanism of gaseous monoaromatics. These findings are helpful to achieve controllable product formation from the oxidation of monoaromatics and predict their migration process in the atmospheric environment.

Phenolic compounds degradation: Insight into the role and evidence of oxygen vacancy defects engineering on nanomaterials

Oxygen vacancy as a typical point defect has incited substantial interest in photocatalysis due to its profound impact on optical absorption response and facile isolation of photocarriers. The presence of oxygen vacancy can introduce the midgap defect states, which promote extended absorption in the visible region. The redistribution of electron density at the surface can stimulate the adsorption and activation kinetics of adsorbates, manifesting optimal photocatalytic performance. Despite such alluring outcomes, the ambiguity in understanding the precise location, appropriate concentration, and oxygen vacancy role is still a long-standing task. The present review article comprehensively outlines the identification of oxygen vacancy defects at bulk or on the surface and its ultimate effect on the photocatalytic degradation of phenolic compounds. Particular emphasis has been drawn to summarize the critical influence of oxygen vacancy on different factors such as crystal structure, bandgap energy, electronic structure, and charge carrier mobility by integrating experimental results and theoretical calculations. We have also explored the reaction pathways and the intermediate chemistry of phenol photodegradation by analyzing the molecular activation (O₂, H₂O, and sulphate activation) through oxygen vacancy defects. Finally, the review concludes with the various challenges and future perspectives, aiming to provide a firm base for further progressions towards photocatalysis.

A review on recent advancements in photocatalytic remediation for harmful inorganic and organic gases

Due to the continuous increase in industrial pollution and modern lifestyle, several types of air contaminants and their concentrations are emerging in the atmosphere. Besides, photocatalysis has gained much attention in the elimination of air pollution. Several ultraviolet and visible light active photocatalysts were tested in air pollutant treatment and thereby, the number of reports was increased in the past few years. In this context, this review describes the photocatalytic treatment of gaseous inorganic contaminants like NO_x, H₂S, and organic pollutants like formaldehyde, acetaldehyde, and benzene derivatives. Different photocatalysts with their air pollutant removal efficiency were explained. Improving strategies such as metal/non-metal doping, composite formation for photocatalyst activities have been studied. Moreover, an analysis is presented from each of the existing photocatalytic immobilization approaches. Also, factors responsible for effective photocatalysis were explained. Overall, the photocatalytic abatement technique is an auspicious way to eliminate different air contaminants. Besides, existing drawbacks and future challenges are also discussed.

Achieving toluene efficient mineralization over K/ɑ-MnO2via oxygen vacancy modulation

Oxygen vacancy plays an important role in adsorption and activation of oxygen species and therefore promotes the catalytic performance of materials in heterogeneous oxidation reactions. Here, a series of K-doped ɑ-MnO₂ materials with different K loadings were synthesized by a reproducible post processing process. Results show that the presence of K⁺ enhances the reducibility and oxygen vacancy concentration of ɑ-MnO₂ due to the break of charge balance and the formation of low valence Mn species. 4-K/MnO₂ material exhibits the highest toluene oxidation activity and satisfied long-term stability and water resistance owing to its superior reducibility and abundant surface absorbed oxygen (O_ads). In situ DRIFTS demonstrate that O_ads greatly accelerates toluene dehydrogenation rate and promotes benzoate formation, enhancing the activation and decomposition of toluene molecules. Moreover, the CC cleavage of benzene ring (forming maleic anhydride) is the rate-determining step of toluene oxidation, which can be easily occurred over 4-K/MnO₂.

Identification of deactivation-resistant origin of In(OH)3 for efficient and durable photodegradation of benzene, toluene and their mixtures

Aromatic hydrocarbon is a representative type of VOCs, which causes adverse effects to human health. The degradation stability of aromatic hydrocarbon is of vital importance to commercializing a photocatalyst for its practical application. The most commonly used titanium dioxide photocatalyst (P25) was deactivated rapidly in the photocatalytic VOCs degradation process. In this work, the indium hydroxide (In(OH)₃) photocatalyst was developed, which exhibited not only higher efficient activity but also ultra-stable stability for degradation of benzene, toluene and their mixtures. The origin of the activity difference between two catalysts was investigated by combined experimental and theoretical ways. Based on in situ DRIFTS and GC-MS, it was revealed that benzoic acid and carbonaceous byproducts were specifically formed and accumulated on P25, which were responsible for deactivation of photocatalyst. In contrast, as revealed by both DFT calculations and experimental results, the reaction pathway with byproducts blocking the active sites can be thermodynamically avoided on In(OH)₃. This rendered high durability to In(OH)₃ photocatalyst in degradations of aromatic pollutants. The elucidation of deactivation-resistant effect and reaction mechanism as an ideal photocatalyst for practical usage were provided.

Recent advances in photocatalytic decomposition of water and pollutants for sustainable application

Photoinduced reduction and oxidation, the important processes in photocatalytic water splitting and organic degradation, have generated increasing interest to address the energy and environmental issues. In this review, the recent developments in bandgap and interfacial engineering for enhanced light absorption, efficient charge separation and interfacial reaction are focused toward the applications in photocatalytic water splitting and organic degradation. In photoinduced reduction for hydrogen evolution, three major strategies are discussed: cocatalysts, sacrificial agents and heterojunctions. In photoinduced oxidation for organic degradation, three types of emerging pollutants of current concerns are highlighted: organic dyes, pharmaceuticals and volatile organic compounds. The key challenges of promising photocatalysts are discussed for future development and practical application.

Doping and facet effects synergistically mediated interfacial reaction mechanism and selectivity in photocatalytic NO abatement

The surface atomic coordination and arrangement largely determine photocatalytic properties. Whereas, the intrinsic impact of surface microstructures on the reaction mechanism and pathway is still unclear. Herein, via constructing N-doped Bi₂O₂CO₃ photocatalysts with diverse exposed facets, (1 1 0) and (0 0 1) facet, we testify that the pivotal roles of crystal facet and doping effect on the intermediate production and reactivity for photocatalytic nitric oxide (NO) abatement. The photoreactivity of N-doped Bi₂O₂CO₃ is documented to be higher than that of the pure samples because of the enhanced light absorption and charge transfer. Further in situ probing experiments and theoretical calculations verify that the unique adsorption patterns and activated intermediates on the (1 1 0) facet facilitate the formation of final products and inhibit the generation of toxic NO₂ by-product in terms of thermodynamics. More importantly, we found that the selective and nonselective oxidation processes are emerged over (1 1 0) and (0 0 1) facets of Bi₂O₂CO₃, respectively.

Fabrication of novel Ag4Bi2O5-x towards excellent photocatalytic oxidation of gaseous toluene under visible light irradiation

In this work, a novel oxide combined with bismuth (Bi) and silver (Ag) was prepared via simple ball milling. This substance was optimized by adjusting the amount of pre-source. Preliminary characterization results confirmed the successful synthesis of Ag₄Bi₂O₅. Subsequently, gaseous toluene was selected as model compound to evaluate the photocatalytic activity of Ag₄Bi₂O₅ photocatalyst. According to the degradation results, Ag₄Bi₂O₅ performed excellent visible light-driven photocatalytic activity with high stability. For the oxidation process of gaseous compound, reactive oxygen species (ROS) were responsible for the achievement, and the formation of oxygen vacancies on Ag₄Bi₂O₅ were involved in the generation of ROS to promote the transfer of photogenerated electrons, and improving photocatalytic activity. DFT calculations revealed the theoretical band gap of Ag₄Bi₂O₅ bulk is 1.758 eV. And the work function of Ag₄Bi₂O₅ (112)ov was ca. at 4.447 eV. The material was easily fabricated and a reliable path was provided for the synthesis of new and efficient photocatalyst for the remediation of polluted indoor air.

Photocatalytic reaction mechanisms at the gas–solid interface for environmental and energy applications

Five gas–solid photocatalytic reactions including the oxidation of NOx, VOCs and NH3, and reduction of CO2 and N2 are summarized. Besides, basic properties of gas molecules, their adsorption and activation, and various reaction pathways are analyzed.

Volatile Organic Compounds (VOCs) Removal from Indoor Air by Heterostructures/Composites/Doped Photocatalysts: A Mini-Review

The impact of volatile organic compounds (VOCs) on indoor air quality and, furthermore, on human health is still a subject of research investigations considering the large increase in forms of cancer and related diseases. VOCs can be 10 times higher in indoor air concentrations then that of the outdoors, as a consequence of emissions from electronics, building materials and consumer goods. Direct transformation of VOCs in mineralization products seems to be an alternative to reduce indoor air contaminants. The advantage of photocatalysis implementation in indoor air treatment is given by the absence of additional chemicals (such as H2O2) and waste. The present mini-review presents a comparative study on VOCs photocatalytic removal considering the photocatalyst composition, morphology and specific surface. The sheet-like morphology seems to provide a higher number of active sites which may contribute to oxidative reactions. The insertion of materials able to increase light absorbance or to mediate the charge carrier's transport will have a beneficial impact on the overall photocatalytic efficiency. Additionally, surface chemistry must be considered when developing photocatalysts for certain gas pollutants in order to favor molecule absorbance in the interfacial region. An energy consumption perspective is given based on the light intensity and irradiation period.