Structure design enables stable anionic and cationic redox chemistry in a T2-type Li-excess layered oxide cathode

Recent advances in lithium-rich manganese-based cathodes for high energy density lithium-ion batteries

The development of society challenges the limit of lithium-ion batteries (LIBs) in terms of energy density and safety. Lithium-rich manganese oxide (LRMO) is regarded as one of the most promising cathode materials owing to its advantages of high voltage and specific capacity (more than 250 mA h g^-1) as well as low cost. However, the problems of fast voltage/capacity fading, poor rate performance and the low initial Coulombic efficiency severely hinder its practical application. In this paper, we review the latest research advances of LRMO cathode materials, including crystal structure, electrochemical reaction mechanism, existing problems and modification strategies. In this review, we pay more attention to recent progress in modification methods, including surface modification, doping, morphology and structure design, binder and electrolyte additives, and integration strategies. It not only includes widely studied strategies such as composition and process optimization, coating, defect engineering, and surface treatment, but also introduces many relatively novel modification methods, such as novel coatings, grain boundary coating, gradient design, single crystal, ion exchange method, solid-state batteries and entropy stabilization strategy. Finally, we summarize the existing problems in the development of LRMO and put forward some perspectives on the further research.

Nb2O5 Coating to Improve the Cyclic Stability and Voltage Decay of Li-Rich Cathode Material for Lithium-Ion Battery

The commercialization of lithium manganese oxide (LMO) is seriously hindered by several drawbacks, such as low initial Coulombic efficiency, the degradation of the voltage and capacity during cycling, and the poor rating performance. Developing a simple and scalable synthesis for engineering with surface coating layers is significant and challenging for the commercial prospects of LMO oxides. Herein, we have proposed an efficient engineering strategy with a Nb₂O₅ coating layer. We dissolved niobate (V) ammonium oxalate hydrate and stoichiometric rich LMO (RLM) in deionized water and stirred constantly. Then, the target product was calcined at high temperature. The discharge capacity of the Nb₂O₅ coating RLM is increased from 195 mAh·g^-1 (the RLM without Nb₂O₅) to 215 mAh·g^-1 at a coating volume ratio of 0.010. The average voltage decay was 4.38 mV/cycle, which was far lower than the 7.50 mV/cycle for the pure LMO. The electrochemical kinetics results indicated that the performance was superior with the buffer engineering by the Nb₂O₅ coating of RLM, which provided an excellent lithium-ion conduction channel, and improved diffusion kinetics, capacity fading, and voltage decay. This reveals the strong potential of the Nb₂O₅ coating in the field of cathode materials for lithium-ion batteries.

Ion-Migration Mechanism: An Overall Understanding of Anionic Redox Activity in Metal Oxide Cathodes of Li/Na-Ion Batteries

The anionic redox reaction (ARR) has attracted extensive attention due to its potential to enhance the reversible capacity of cathode materials in Li/Na-ion batteries (LIBs/SIBs). However, the understanding of its activation mechanism is still limited by the insufficient mastering of the underlying thermodynamics and kinetics. Herein, a series of Mg/Li/Zn-substituted Na_x MnO₂ and Li_x MnO₂ cathode materials are designed to investigate their ARR behaviors. It is found that the ARR can be activated in only Li-substituted Li_x MnO₂ and not for Mg- and Zn-substituted ones, while all Mg/Li/Zn-substituted Na_x MnO₂ cathode materials exhibit ARR activities. Combining theoretical calculations with experimental results, such a huge difference between Li and Na cathodes is closely related to the migration of substitution ions from the transition metal layer to the alkali metal layer in a kinetic aspect, which generates unique Li(Na)-O-□_TM and/or □_{Li/ Na} -O-□_TM configurations and reducing reaction activation energy to trigger the ARR. Based on these findings, an ion-migration mechanism is proposed to explain the different ARR behaviors between the Na_x MnO₂ and Li_x MnO₂ , which can not only reveal the origin of ARR in the kinetic aspect, but also provide a new insight for the development of high-capacity metal oxide cathode materials for LIBs/SIBs.

Superstructure Control of Anionic Redox Behavior in Manganese-Based Cathode Materials for Li-Ion Batteries

Anionic charge compensation creates conditions for realizing high capacity and energy density of Li-ion batteries cathode materials. However, the issues of voltage hysteresis, capacity attenuation, and structure transformation caused by the labile anionic redox are still difficult to solve fundamentally. The superstructure formed by a Li-Mn ordered arrangement is the intrinsic reason to trigger the anionic charge compensation. In this work, manganese-based cathode materials with series of Li-Mn ordered superstructure types have been prepared by an ion exchange method, and superstructure control of the anionic redox behavior has been synthetically investigated. With the dispersion of a LiMn₆ superstructure unit, the aggregation of Li vacancies in Mn slab is gradually inhibited, which eliminates the production of O-O dimers and improves the reversibility of oxygen redox. Therefore, the voltage hysteresis and capacity fading have been significantly improved. Meanwhile, the amount of reactive oxygen species and their capacity contribution is reduced, and the sluggish electrochemical reaction kinetics of anion requires a low current density to boost the high-capacity advantage. This paper provides effective ideas for the design of various superstructures and the rational utilization of anionic redox.