Aged-engineered nanoparticles effect on sludge anaerobic digestion performance and associated microbial communities

Illuminating bioprocess responses to metal-based nanoparticles addition along hydrogen and methane production pathways: A review

Recent research has discussed the positive impacts of metal-based nanoparticles (NPs) on bioprocesses producing either hydrogen (H2) or methane (CH4). The enhancement has been explained by mechanisms such as direct interspecies electron transfer (DIET), metal corrosion, and dissimilatory reduction. Such interactions could induce further benefits, such as controlling oxidation-reduction potential (ORP), mitigating toxicants, promoting enzymatic activity, and altering the microbiome, which have not yet been comprehensively discussed. Factors like metal type, oxidation state, and size of NPs are crucial for their reactivity and corresponding responses. This review discusses how different redox potentials of metals can regulate metabolic pathways and how NPs and their reactive ions can eliminate toxicants (e.g., sulfate) and enhance the activity of intra- and extracellular enzymes. The enrichment of responsive microorganisms in correlation with NPs is further discussed. A better understanding of the multifaceted role of metal-based NPs can guide potential new incorporation strategies to improve bioprocesses.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Magnetite-based nanoparticles and nanocomposites for recovery of overloaded anaerobic digesters

The effect of magnetite nanoparticles and nanocomposites (magnetite nanoparticles impregnated into graphene oxide) supplement on the recovery of overloaded laboratory batch anaerobic reactors was assessed using two types of starting inoculum: anaerobic granular sludge (GS) and flocculent sludge (FS). Both nanomaterials recovered methane production at a dose of 0.27 g/L within 40 days in GS. Four doses of magnetite nanoparticles from 0.075 to 1 g/L recovered the process in FS systems between 30 and 50 days relaying on the dose. The presence of nanomaterials helped to reverse the effect of volatile fatty acids inhibition and enabled microbial communities to recover but also favoured the development of certain microorganisms over others. In GS reactors, the methanogenic population changed from being mostly acetoclastic (Methanothrix soehngenii) to being dominated by hydrogenotrophic species (Methanobacterium beijingense). Nanomaterial amendment may serve as a preventative measure or provide an effective remedial solution for system recovery following overloading.

Nanomaterials for biogas augmentation towards renewable and sustainable energy production: A critical review

Nanotechnology is considered one of the most significant advancements in science and technology over the last few decades. However, the contemporary use of nanomaterials in bioenergy production is very deficient. This study evaluates the application of nanomaterials for biogas production from different kinds of waste. A state-of-the-art comprehensive review is carried out to elaborate on the deployment of different categories of nano-additives (metal oxides, zero-valent metals, various compounds, carbon-based nanomaterials, nano-composites, and nano-ash) in several kinds of biodegradable waste, including cattle manure, wastewater sludge, municipal solid waste, lake sediments, and sanitary landfills. This study discusses the pros and cons of nano-additives on biogas production from the anaerobic digestion process. Several all-inclusive tables are presented to appraise the literature on different nanomaterials used for biogas production from biomass. Future perspectives to increase biogas production via nano-additives are presented, and the conclusion is drawn on the productivity of biogas based on various nanomaterials. A qualitative review of relevant literature published in the last 50 years is conducted using the bibliometric technique for the first time in literature. About 14,000 research articles are included in this analysis, indexed on the Web of Science. The analysis revealed that the last decade (2010–20) was the golden era for biogas literature, as 84.4% of total publications were published in this timeline. Moreover, it was observed that nanomaterials had revolutionized the field of anaerobic digestion, methane production, and waste activated sludge; and are currently the central pivot of the research community. The toxicity of nanomaterials adversely affects anaerobic bacteria; therefore, using bioactive nanomaterials is emerging as the best alternative. Conducting optimization studies by varying substrate and nanomaterials’ size, concentration and shape is still a field. Furthermore, collecting and disposing nanomaterials at the end of the anaerobic process is a critical environmental challenge to technology implementation that needs to be addressed before the nanomaterials assisted anaerobic process could pave its path to the large-scale industrial sector.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

Biochar and hydrochar in the context of anaerobic digestion for a circular approach: An overview

Biochar and hydrochar are carbonaceous materials with valuable applications. They can be synthesized from a wide range of organic wastes, including digestate. Digestate is the byproduct of anaerobic digestion (AD), which is performed for bioenergy (biogas) production from organic residues. Through a thermochemical process, such as pyrolysis, gasification, and hydrothermal carbonization - HTC, digestate can be converted into biochar or hydrochar. The addition of either biochar or hydrochar in AD has been reported to improve biochemical reactions and microbial growth, increasing the buffer capacity, and facilitating direct interspecies electrons transfer (DIET), resulting in higher methane (CH₄) yields. Both biochar and hydrochar can adsorb undesired compounds present in biogas, such as carbon dioxide (CO₂), hydrogen sulfide (H₂S), ammonia (NH₃), and even siloxanes. However, an integrated understanding of biochar and hydrochar produced from digestate through their return to the AD process, as additives or as adsorbents for biogas purification, is yet to be attained to close the material flow loop in a circular economy model. Therefore, this overview aimed at addressing the integration of biochar and hydrochar production from digestate, their utilization as additives and effects on AD, and their potential to adsorb biogas contaminants. This integration is supported by life cycle assessment (LCA) studies, showing positive results when combining AD and the aforementioned thermochemical processes, although more LCA is still necessary. Techno-economic assessment (TEA) studies of the processes considered are also presented, and despite an expanding market of biochar and hydrochar, further TEA is required to verify the profitability of the proposed integration, given the specificities of each process design. Overall, the synthesis of biochar and hydrochar from digestate can contribute to improving the AD process, establishing a cyclic process that is in agreement with the circular economy concept.

The Coupling Response between Different Bacterial Metabolic Functions in Water and Sediment Improve the Ability to Mitigate Climate Change

Extreme climatic events, such as heat wave and large temperature fluctuations, are predicted to increase in frequency and intensity during the next hundred years, which may rapidly alter the composition and function of lake bacterial communities. Here, we conducted a year-long experiment to explore the effect of warming on bacterial metabolic function of lake water and sediment. Predictions of the metabolic capabilities of these communities were performed with FAPROTAX using 16S rRNA sequencing data. The results indicated that the increase in temperature changed the structure of bacterial metabolic functional groups in water and sediment. During periods of low temperature, the carbon degradation pathway decreased, and the synthesis pathway increased, under the stimulation of warming, especially under the conditions temperature fluctuation. We also observed that nitrogen fixation ability was especially important in the warming treatments during the summer season. However, an elevated temperature significantly led to reduced nitrogen fixation abilities in winter. Compared with the water column, the most predominant functional groups of nitrogen cycle in sediment were nitrite oxidation and nitrification. Variable warming significantly promoted nitrite oxidation and nitrification function in winter, and constant warming was significantly inhibited in spring, with control in sediments. Co-occurrence network results showed that warming, especially variable warming, made microbial co-occurrence networks larger, more connected and less modular, and eventually functional groups in the water column and sediment cooperated to resist warming. We concluded that warming changed bacterial functional potentials important to the biogeochemical cycling in the experimental mesocosms in winter and spring with low temperature. The effect of different bacteria metabolism functions in water column and sediment may change the carbon and nitrogen fluxes in aquatic ecosystems. In conclusion, the coupling response between different bacterial metabolic functions in water and sediment may improve the ability to mitigate climate change.

Deciphering mono/multivalent draw solute-induced microbial ecology and membrane fouling in anaerobic osmotic membrane bioreactor

Anaerobic osmotic membrane bioreactor (AnOMBR) attracted attention due to high quality effluent production with low energy demand, and draw solute has significant effect on the system performance. However, the mutual relationship between draw solute-induced salinity accumulation and microbial community had many unknown questions to be solved. This study purpose was to construct two AnOMBR to compare the impact of draw solutes of NaCl and MgCl2 on the dynamic change of microbial ecology and membrane fouling. The result indicated that the draw solute of MgCl2 caused less salinity and more membrane biofouling than that of the draw solute NaCl. Multiple microbiological analysis methods were applied to discover keystone species related to the conductivity change and membrane fouling, especially for the MgCl2-AnOMBR system. It was found that draw solute NaCl could benefit the growth of Proteobacteria to become the most abundant phylum to affect the membrane fouling, while Mg2+ introduction could stimulate the growth of NS9, Hydrogenphilaceae and Pedosphaeraceae to potentially cause the biofouling. Furthermore, phylogenetic molecular ecological networks (pMENs) deeply analyzed the microbial structure difference under Na+ and Mg2+ introduction, and indicated that the family Lentimicrobiaceae and Candidatus_Kaiserbacteria were the keystone species in NaCl-AnOMBR, while two genus Anaerolinea and SWB02, and two families Saprospiraceae and NS9 were discovered to have key effect in MgCl2-AnOMBR due to their strong extracellular polymeric substances (EPS) production ability for survival of other microorganisms. This study was significant to give microbial targets under the impact of various draw solutes, as the reference for the engineers to further investigate how to improve the microbial structure to enhance AnOMBR performance and inhibit the membrane biofouling.

Overview on agricultural potentials of biogas slurry (BGS): applications, challenges, and solutions

The residual slurry obtained from the anaerobic digestion (AD) of biogas feed substrates such as livestock dung is known as BGS. BGS is a rich source of nutrients and bioactive compounds having an important role in establishing diverse microbial communities, accelerating nutrient use efficiency, and promoting overall soil and plant health management. However, challenges such as lower C/N transformation rates, ammonia volatilization, high pH, and bulkiness limit their extensive applications. Here we review the strategies of BGS valorization through microbial and organomineral amendments. Such cohesive approaches can serve dual purposes viz. green organic inputs for sustainable agriculture practices and value addition of biomass waste. The literature survey has been conducted to identify the knowledge gaps and critically analyze the latest technological interventions to upgrade the BGS for potential applications in agriculture fields. The major points are as follows: (1) Bio/nanotechnology-inspired approaches could serve as a constructive platform for integrating BGS with other organic materials to exploit microbial diversity dynamics through multi-substrate interactions. (2) Advancements in next-generation sequencing (NGS) pave an ideal pathway to study the complex microflora and translate the potential information into bioprospecting of BGS to ameliorate existing bio-fertilizer formulations. (3) Nanoparticles (NPs) have the potential to establish a link between syntrophic bacteria and methanogens through direct interspecies electron transfer and thereby contribute towards improved efficiency of AD. (4) Developments in techniques of nutrient recovery from the BGS facilities' negative GHGs emissions and energy-efficient models for nitrogen removal. (5) Possibilities of formulating low-cost substrates for mass-multiplication of beneficial microbes, bioprospecting of such microbes to produce bioactive compounds of anti-phytopathogenic activities, and developing BGS-inspired biofertilizer formulations integrating NPs, microbial inoculants, and deoiled seed cakes have been examined.

Impact of electro-conductive nanoparticles additives on anaerobic digestion performance - A review

Anaerobic digestion (AD) is a biochemical process that converts waste organic matter into energy-rich biogas with methane as the main component. Addition of electric electro-conductive, such as that nanoparticles (NP), has been shown to improve biogas generation. Interspecies electron transfer and direct interspecies electron transfer (DIET) using conductive materials is one of the mechanisms responsible for observed increases in CH₄. This article discusses the effect of the type and size of electro-conductive NPs on improving microbial degradation within AD systems, as well as the effect of electro-conductive NPs on microbial community shifts and syntrophic metabolism. Limitations and future perspectives of using NPs in an AD system is also discussed.

Enrichment of thermophilic methanogenic microflora from mesophilic waste activated sludge for anaerobic digestion of garbage slurry

This study investigated a startup strategy for thermophilic methanogenic enrichment. Conventional waste activated sludge (WAS) was used as the seed. The WAS seed was incubated at 55 °C in a continuous-flow stirred tank reactor, with garbage slurry fed continuously as a substrate. One of the two reactors (termed reactor-high, RH) was fed with a high concentration of substrate (30 g-COD/L), while the other (reactor-low, RL) received a lower concentration of feed (15 g-COD/L). The specific organic loading rate was 0.2 g-COD/L/day initially, which was gradually increased by shortening the hydraulic retention time. The final OLR was 3.2 g-COD/L/day, after more than 90% of the initial WAS got washed out from the reactor and thermophilic microorganisms became dominant in the reactors. Biogas production rate and methane conversion ratio depended on substrate concentration, although total chemical oxygen demand removal and methane content were almost the same in RH and RL. Biogas production rate in RH was 3.2 times higher than that in RL, while the conversion ratio of RH was 1.6 times higher than that of RL. Quantitative polymerase chain reaction analysis using specific primers for the mcrA gene and high-throughput sequencing analysis of 16S rRNA gene amplicons demonstrated post enrichment differences in the microbial community, relative to that in the WAS. There was no significant difference in the enriched microbial community composition between RH and RL. In conclusion, thermophilic methanogenic microflora can be enriched from mesophilic seeds. Methanothermobacter, Methanosarcina, and other thermophilic bacteria were enriched in the community over time, with these thermophiles collectively accounting for ∼80% of the stable thermophilic community.

The role of conductive nanoparticles in anaerobic digestion: Mechanism, current status and future perspectives

In the current scenario, alternative energy sources are the need of the hour. Organic wastes having a larger fraction of biodegradable constituents present a sustainable bioenergy source. It has been reported that the calorific value of biogas generated by anaerobic digestion (AD) is 21-25 MJ/m³ with the treatment which makes it an excellent replacement of natural gas and fossil fuels and can reduce more than 80% greenhouse gas emission to the surroundings. However, there are some limitations associated with the AD process for instance ammonia build-up at the first stage reduces the rate of hydrolysis of biomass, whereas, in the last stage it interferes with methane formation. Owing to special physicochemical properties such as high activity, high reactive surface area, and high specificity, tailor-made conductive nanoparticles can improve the performance of the AD process. In the AD process, H₂ is used as an electron carrier, referred as mediated interspecies electron transfer (MIET). Due to the diffusion limitation of these electron carriers, the MIET efficiency is relatively low that limits the methanogenesis. Direct interspecies electron transfer (DIET), which enables direct cell-to-cell electron transport between bacteria and methanogen, has been considered an alternative efficient approach to MIET that creates metabolically favorable conditions and results in faster conversion of organic acids and alcohols into methane. This paper discusses in detail the application of conductive nanoparticles to enhance the AD process efficiency. Interaction between microbes in anaerobic conditions for electron transfer with the help of CNPs is discussed. Application of a variety of conductive nanomaterials as an additive is discussed with their potential biogas production and treatment enhancement in the anaerobic digestion process.

Influence of zinc oxide nanoparticles on anaerobic digestion of waste activated sludge and microbial communities

The influence of long-term exposure of zinc oxide nanoparticles (ZnO NPs) to waste activated sludge on anaerobic digestion and microbial communities was studied. The exposure concentrations were 0, 30, 60, 90, 120, and 150 mg g-1-volatile suspended solids (VSS) (dry). ZnO NPs inhibit the degradation of macromolecular organic matter and the reduction of VSS in waste activated sludge during anaerobic digestion. Only slight effects on the activities of protease, cellulase, acetated kinase, and coenzyme F420 were found at ZnO-NP concentrations of less than 30 mg g-1-VSS, whereas the activities of these three enzymes were adversely affected in a dose-dependent manner when the ZnO NP concentrations were increased from 30 mg g-1-VSS to 150 mg g-1-VSS. High-throughput sequencing analysis revealed that ZnO NPs had an adverse influence on the archaeal community diversity but increased the bacterial community diversity to some extent. High-throughput sequencing analysis also revealed that ZnO NPs resulted in different shift trends in the archaeal and bacteria community structure at phylum, class, and genus levels. ZnO NPs have negative impacts on the Euryarchaeota community, which plays a significant role as methanogens in the anaerobic digestion. In addition, ZnO NPs could increase the relative abundance of Clostridia and Bacteroidia, playing an important role in hydrolysis during the anaerobic digestion.

Changes in syntrophic microbial communities, EPS matrix, and gene-expression patterns in biofilm anode in response to silver nanoparticles exposure

Understanding the toxic effect of silver nanoparticles (AgNPs) on various biological wastewater treatment systems is of significant interest to researchers. In recent years, microbial electrochemical technologies have opened up new opportunities for bioenergy and chemicals production from organic wastewater. However, the effects of AgNPs on microbial electrochemical systems are yet to be understood fully. Notably, no studies have investigated the impact of AgNPs on a microbial electrochemical system fed with a complex fermentable substrate. Here, we investigated the impact of AgNPs (50 mg/L) exposure to a biofilm anode in a microbial electrolysis cell (MEC) fed with glucose. The volumetric current density was 29 ± 2.0 A/m³ before the AgNPs exposure, which decreased to 20 ± 2.2 A/m³ after AgNPs exposure. The biofilms produced more extracellular polymeric substances (EPS) to cope with the AgNPs exposure, while carbohydrate to protein ratio in EPS considerably increased from 0.4 to 0.7. Scanning electron microscope (SEM) imaging also confirmed the marked excretion of EPS, forming a thick layer covering the anode biofilms after AgNPs injection. Transmission electron microscope (TEM) imaging showed that AgNPs still penetrated some microbial cells, which could explain the deterioration of MEC performance after AgNPs exposure. The relative expression level of the quorum signalling gene (LuxR) increased by 30%. Microbial community analyses suggested that various fermentative bacterial species (e.g., Bacteroides, Synergistaceae_vadinCA02, Dysgonomonas, etc.) were susceptible to AgNPs toxicity, which led to the disruption of their syntrophic partnership with electroactive bacteria. The abundance of some specific electroactive bacteria (e.g., Geobacter species) also decreased. Moreover, decreased relative expressions of various extracellular electron transfer associated genes (omcB, omcC, omcE, omcZ, omcS, and pilA) were observed. However, the members of family Enterobacteriaceae, known to perform a dual function of fermentation and anodic respiration, became dominant after biofilm anode exposed to AgNPs. Thus, EPS extraction provided partial protection against AgNPs exposure.

Anaerobic co-digestion of sewage sludge with cellulose, protein, and lipids: Role of rheology and digestibility

Rheology is known to have an impact on the performance of digesters, but the effect of additional substrates (co-digestion) is poorly understood. The main objective of this study was to investigate the effects of the addition of cellulose, protein and lipids to substrates on the rheological behaviour and biogas production of the mixture of primary sludge (PS) and waste-activated sludge (WAS) in a batch system. A mixture of PS and WAS to form the main substrate was anaerobically co-digested with different types of organic matter (cellulose, protein and lipids) as co-substrates at different co-substrate to main substrate ratios of 2-8 (wt%) under mesophilic conditions and below ammonia inhibition levels. Yield stress (τ_y) and the flow consistency index (k) of the combined feed in the case of cellulose and protein were significantly dependent on the amount of co-substrate added, while there was an insignificant impact on these properties when lipids were added. Cellulose significantly increased τ_y and k in the feed, which resulted in poor fluidity and the improper homogenisation of the digester content, and consequently decreased the biogas yield. In contrast, the biogas yield was improved through the addition of 2% to 6% protein despite an increase in τ_y and k of the feed, but the methane yield decreased at 7% and 8% levels of protein concentration. This observation indicates that the threshold for τ_y and k of the digester media depends on the organic nature and digestibility of the substrate. There was no significant impact on the flow properties of the initial mixture when lipids were added, and their addition increased the biogas yield. A first-order kinetic reaction model was used for predicting the yield of methane from these digesters. The rate constant values revealed an increasing trend, with the highest for protein then lipids then cellulose.

Temporal and spatial variations in the bacterial community composition in Lake Bosten, a large, brackish lake in China

The bacteria inhabiting brackish lake environments in arid or semi-arid regions have not been thoroughly identified. In this study, the 454 pyrosequencing method was used to study the sedimentary bacterial community composition (BCC) and diversity in Lake Bosten, which is located in the arid regions of northwestern China. A total of 210,233 high-quality sequence reads and 8,427 operational taxonomic units (OTUs) were successfully obtained from 20 selected sediment samples. The samples were quantitatively dominated by members of Proteobacteria (34.1% ± 11.0%), Firmicutes (21.8% ± 21.9%) and Chloroflexi (13.8% ± 5.2%), which accounted for more than 69% of the bacterial sequences. The results showed that (i) Lake Bosten had significant spatial heterogeneity, and TOC(total organic carbon), TN(total nitrogen) and TP(total phosphorus) were the most important contributors to bacterial diversity; (ii) there was lower taxonomic richness in Lake Bosten, which is located in an arid region, than in reference lakes in eutrophic floodplains and marine systems; and (iii) there was a low percentage of dominant species in the BCC and a high percentage of unidentified bacteria. Our data help to better describe the diversity and distribution of bacterial communities in contaminated brackish lakes in arid regions and how microbes respond to environmental changes in these stable inland waters in arid or semi-arid regions.

Impacts of different biochar types on the anaerobic digestion of sewage sludge

In this study, the effect of nine types of biochar generated from three different feedstocks on the anaerobic digestion (AD) of sewage sludge was investigated. The obtained results indicated that methane production could be significantly enhanced by all types of biochar used in the test. The maximum cumulative methane yield of 218.45 L per kg VS was obtained for the culture with corn straws pyrolyzed at 600 °C which also exhibited the largest specific surface area. Adding an appropriate amount of biochar was beneficial to improve the cumulative methane yield, while excessive addition could inhibit the AD process. Biochar could also enhance AD process stability by increasing buffering capacity, releasing volatile fatty acid accumulation and alleviating ammonia inhibition. Simultaneously, microbial community analysis revealed that biochar addition was able to improve the diversity of archaeal community and adjust the microbial communities. It was notable that biochar treatment facilitated the aceticlastic methanogens (Methanosarcina) compared to the hydrogenotrophic methanogens. Overall, biochar addition could be an ideal approach that is not only expected to successfully improve the performance of AD, but also lay a new path for future biomass energy utilization.

Characterisation of food service establishment wastewater and its implication for treatment

Essential for the selection of a reliable treatment system is the characterisation of the effluent to treat. Kitchen wastewater (KWW) from food service establishments (FSEs) is a strong organic and fat-rich effluent whose characterisation has not been sufficiently addressed. KWW composition is highly variable and linked to the FSE's size, the type of meals prepared and the amount of water used during the cleaning. COD, TSS and fat content (FOG) are the most common parameters found in literature. However, other physical and chemical parameters (e.g. temperature, pH, oil droplets characteristics and trace elements), correlated to commercial kitchen cleaning practices rather than the specific effluent, but equally influential on the treatment efficiencies of both physical and biological methods, have hardly been investigated. A comprehensive characterisation of wastewaters from three food service establishments was used to generate data to support the selection of appropriate FOG mitigation methods. Two novel analytical methods were used to quantify the proportion of emulsified FOG and associated droplet size from different kitchen washing effluents. The results showed that more than 90% of the FOG from the dishwasher effluent and around 35% of sink one was emulsified, with droplet sizes less than 100 μm, well below the removal capabilities of conventional grease interceptors, but easily removed using biological means. From the WW composition results, a formula for predictive modelling was derived to represent average organic matter composition for kitchen wastewater as C₂₀H₃₈O₁₀N, applicable in remediation processes. These results offer a good starting point for the design, operation, and optimisation of wastewater treatment systems of oil-rich KWW.

Impact of adding metal nanoparticles on anaerobic digestion performance - A review

Anaerobic digestion is the most widely adopted biological waste treatment processes with renewable energy production. The effects of adding metal nanoparticles (NPs) on improving digestion performance are well noted. This paper reviewed the traditional view on the cytotoxicity of NPs to living organisms and the contemporary view of mechanisms for enhancement in anaerobic digestion performance in the presence of metal NPs. The complicated interactions acquire further studies for comprehending the physical and chemical interactions of metal NPs to the constituent compounds and to the living cells, and the involvement of mechanisms such as direct interspecies electron transfer for better design and control of the "NP strategy" for anaerobic digestion performance enhancement.

Performance of a forward osmotic membrane bioreactor for anaerobic digestion of waste sludge with increasing solid concentration

A forward osmotic membrane bioreactor for sludge anaerobic digestion (ad-OMBR) could realize high-solid digestion via drawing moisture out by forward osmosis (FO). Methane production and microbial community evolution were monitored in an ad-OMBR as the total solids (TS) content was gradually increased. With magnesium chloride (MgCl₂) and cellulose triacetate (CTA) membrane as a draw solution and FO membrane, respectively, the ad-OMBR exhibited better performance than the conventional digester, with higher solid content, organic degradation and methane content in biogas. The conductivity of the ad-OMBR did not increase, potentially because of the formation of struvite crystals aided by the reverse-fluxed Mg²⁺ ions. Microbial diversity increased along with the increase in solid content based on the Shannon index, while the most operational taxonomic units were obtained in the 8% TS sludge Although phylum Firmicutes decreased when the TS content was raised to 11%, the relative abundance of Proteobacteria, Chloroflexi, Actinobacteria, and Bacteroidetes, which could also degrade organic matter, increased with increasing TS in ad-OMBR. FO membrane fouling in ad-OMBR was highly reversible.

Effects of environmentally relevant concentrations of mixtures of TiO2, ZnO and Ag ENPs on a river bacterial community

Effluent from wastewater treatment plants contains a wide variety of engineered nanoparticles (ENPs) released from different sources. Although single type ENPs have been studied extensively with respect to their environmental impact, ENPs in mixed forms have not been investigated much at environmentally relevant concentrations. This study was designed to test the effect of mixed ENPs at three combinations and concentrations on an aquatic bacterial community. After mixing artificial treated wastewater with river water and exposing the microbial community to ENPs for three days, the ENPs were characterized by SP-ICP-MS. Results from this study showed that: 1) the size distribution of Ti and Zn at the beginning and end of the experiment did not vary much among all tested conditions. For Ag, the most frequent size increased more than 2-fold when the highest Ag ENPs were added; 2) particle concentrations of ENPs generally correlated positively with added concentrations; 3) dissolved Zn and Ag increased significantly as a result of spike; and 4) the bacterial community structure was shifted significantly as a consequence of ENPs' addition. With the dominant population being suppressed, the community exposed to ENPs became more diverse and even. Surprisingly, further increase of the doses of the three ENPs did not bring significant change to the microbial community. These results revealed that ENPs could bring significant impacts to prokaryotes even at low concentrations. But these impacts do not necessarily correlate positively with doses.

Linking nano-ZnO contamination to microbial community profiling in sanitary landfill simulations

Nanomaterials (NMs) commercially used for various activities mostly end up in landfills. Reduced biogas productions reported in landfill reactors create a need for more comprehensive research on these greatly-diverse microbial pools. In order to evaluate the impact of one of the most widely-used NMs, namely nano-zinc oxide (nano-ZnO), simulated bioreactor and conventional landfills were operated using real municipal solid waste (MSW) for 300 days with addition nano-ZnO. Leachate samples were taken at different phases and analyzed by 16S rRNA gene amplicon sequencing. The bacterial communities were distinctly characterized by Cloacamonaceae (phylum WWE1), Rhodocyclaceae (phylum Proteobacteria), Porphyromonadaceae (phylum Bacteroidetes), and Synergistaceae (phylum Synergistetes). The bacterial community in the bioreactors shifted at the end of the operation and was dominated by Rhodocyclaceae. There was not a major change in the bacterial community in the conventional reactors. The methanogenic archaeal diversity highly differed between the bioreactors and conventional reactors. The dominance of Methanomicrobiaceae was observed in the bioreactors during the peak methane-production period; however, their prominence shifted to WSA2 in the nano-ZnO-added bioreactor and to Methanocorpusculaceae in the control bioreactor towards the end. Methanocorpusculaceae was the most abundant family in both conventional control and nano-ZnO-containing reactors.

Effects of individual and combined zinc oxide nanoparticle, norfloxacin, and sulfamethazine contamination on sludge anaerobic digestion

This work investigated the individual and combined effects of zinc oxide, norfloxacin, and sulfamethazine on sludge anaerobic digestion-associated methane production, protein and carbohydrate metabolism, and microbial diversity. Norfloxacin and sulfamethazine (500 mg/kg) did not inhibit methane production, but inhibited its production rate. Zinc oxide nanoparticles with antibiotics inhibited hydrolysis, fermentation, and methanogenesis over varying digestion periods. Complex pollution had a greater impact on methane production than zinc oxide alone, with acute, synergistic toxicity to methanogenesis over short periods. Complex pollution also had varying effects on bacterial and archaeal communities during digestion. These results aid understanding of the toxicity of emerging contaminants in sludge digestion, with the potential to improve pollution removal and reduce associated risks.

How do zinc oxide and zero valent iron nanoparticles impact the occurrence of antibiotic resistance genes in landfill leachate?

ZnO NP exposure accelerated the dissemination of ARGs by dominantly driving changes in bacterial community, and Fe⁰ NP exposure promoted the attenuation of ARGs by mainly decreasing the abundances of MGEs.

Evaluation of anaerobic digestion of food waste and waste activated sludge: Soluble COD versus its chemical composition

The hydrolysis as an essential step in anaerobic digestion has been commonly evaluated according to the extent of soluble chemical oxygen demand (SCOD) released from biosolids. However, little information is currently available for the effect of chemical compositions of SCOD on anaerobic digestion. This study showed that the non-biodegradable, recalcitrant organics in SCOD released from food waste and waste activated sludge pretreated with fungal mash rich in various enzymes were accumulated with the prolonged hydrolysis, while the methane production was closely related to the chemical compositions of the feed. The analyses by excitation emission matrix and size exclusion chromatography-organic carbon detection-organic nitrogen detection clearly revealed that the biodegradability of SCOD and the performance of anaerobic digestion were both determined by the chemical compositions of SCOD. These in turn challenged the present practice with SCOD concentration as a sole indicator in the selection and optimization of the pretreatment methods of biosolids prior to anaerobic digestion. It is expected that this study can offer useful insights into future design, optimization and operation of anaerobic digestion system in consideration of both SCOD concentration and its chemical compositions.

Understanding microbial ecology can help improve biogas production in AD

454-Pyrosequencing and lipid fingerprinting were used to link anaerobic digestion (AD) process parameters (pH, alkalinity, volatile fatty acids (VFAs), biogas production and methane content) with the reactor microbial community structure and composition. AD microbial communities underwent stress conditions after changes in organic loading rate and digestion substrates. 454-Pyrosequencing analysis showed that, irrespectively of the substrate digested, methane content and pH were always significantly, and positively, correlated with community evenness. In AD, microbial communities with more even distributions of diversity are able to use parallel metabolic pathways and have greater functional stability; hence, they are capable of adapting and responding to disturbances. In all reactors, a decrease in methane content to <30% was always correlated with a 50% increase of Firmicutes sequences (particularly in operational taxonomic units (OTUs) related to Ruminococcaceae and Veillonellaceae). Whereas digesters producing higher methane content (above 60%), contained a high number of sequences related to Synergistetes and unidentified bacterial OTUs. Finally, lipid fingerprinting demonstrated that, under stress, the decrease in archaeal biomass was higher than the bacterial one, and that archaeal Phospholipid etherlipids (PLEL) levels were correlated to reactor performances. These results demonstrate that, across a number of parameters such as lipids, alpha and beta diversity, and OTUs, knowledge of the microbial community structure can be used to predict, monitor, or optimise AD performance.

Effects of individual and complex ciprofloxacin, fullerene C60, and ZnO nanoparticles on sludge digestion: Methane production, metabolism, and microbial community

Antibiotics and nanoparticles, emerging contaminants, present great environmental risks and human health concerns. Sludge adsorption, a biological wastewater treatment removal mechanism, targets ciprofloxacin (Cip) antibiotics, C₆₀, and ZnO, leaving complex pollution in sludge anaerobic digestion. This study investigated the mechanisms through which individual and combined ZnO, Cip, and C₆₀ affect sludge anaerobic digestion by studying their effects on CH₄ production, metabolism, and microbial community. ZnO was generally more toxic to CH₄ production than Cip. The ZnO + Cip complex was more influential (>29%) than ZnO or ZnO + C₆₀, with short-lasting acute and additive toxicity effects on methanogenesis and degradation of protein and carbohydrate. ZnO + C₆₀ and ZnO + Cip exerted apparent additional complex effects on Firmicutes, Aminicenantes, Chloroflexi, and Parcubacteria. These results would potentially aid toxicity control related to complex pollution, and improve energy production and reduce pollution risks when used in land applications.

Discrepant effects of metal and metal oxide nanoparticles on anammox sludge properties: A comparison between Cu and CuO nanoparticles

Metal and metal oxide nanoparticles (NPs) show differences in antimicrobial activity due to different chemical and physical properties. Using copper as a representative example, this study compared the NP effects on anaerobic ammonium oxidation (anammox) bacteria in wastewater treatment. Long-term exposure to 5 mgCu L^-1 CuNPs reduced the physiological activity and abundance of anammox bacteria, thereby causing deterioration of reactor performance. However, anammox granules exhibited stronger resistance and resilience to perturbation by 1-160 mgCu L^-1 CuONPs, and no adverse effects on performance were observed. Moreover, the level of Cu(II) released from NPs in the influent exhibited good correlations with variations of the community structure and sludge properties. Therefore, the effects of Cu-based NPs on anammox sludge properties are dependent on their forms and levels, and their discrepant effects are partially attributed to their ability to release ionic copper.

Comprehensive analysis of microbial communities in full-scale mesophilic and thermophilic anaerobic digesters treating food waste-recycling wastewater

Microbes were sampled for a year in a full-scale mesophilic anaerobic digester (MD) and a thermophilic anaerobic digester (TD) treating food waste-recycling wastewater (FRW), then microbial community structure, dynamics and diversity were quantified. In the MD, Fastidiosipila, Petrimonas, vadinBC27, Syntrophomonas, and Proteiniphilum were dominant bacterial genera; they may contribute to hydrolysis and fermentation. In the TD, Defluviitoga, Gelria and Tepidimicrobium were dominant bacteria; they may be responsible for hydrolysis and acid production. In the MD, dominant methanogens changed from Methanobacterium (17.1 ± 16.9%) to Methanoculleus (67.7 ± 17.8%) due to the increase in ammonium concentration. In the TD, dominant methanogens changed from Methanoculleus (42.8 ± 13.6%) to Methanothermobacter (49.6 ± 11.0%) due to the increase of pH. Bacteria and archaea were more diverse in the MD than in the TD. These results will guide development of microbial management methods to improve the process stability of MD and TD treating FRW.

Amendment of Agricultural Soil with Metal Nanoparticles: Effects on Soil Enzyme Activity and Microbial Community Composition

Several types of engineered nanoparticles (ENPs) are being considered for direct application to soils to reduce the application and degradation of pesticides, provide micronutrients, control pathogens, and increase crop yields. This study examined the effects of different metal ENPs and their dissolved ions on the microbial community composition and enzyme activity of agricultural soil amended with biosolids. The activity of five extracellular nutrient-cycling enzymes was measured in biosolid-amended soils treated with different concentrations (1, 10, or 100 mg ENP/kg soil) of silver (nAg), zinc oxide (nZnO), copper oxide (nCuO), or titanium dioxide (nTiO₂) nanoparticles and their ions over a 30-day period. At 30 days, nZnO and nCuO either had no significant effect on soil enzyme activity or enhanced enzyme activity. In contrast, Ag inhibited selected enzymes when dosed in particulate or dissolved form (at 100 mg/kg). nTiO₂ either had no significant effect or slightly decreased enzyme activity. Illumina MiSeq sequencing of microbial communities indicated a shift in soil microbial community composition upon exposure to high doses of metal ions or nAg and negligible shift in the presence of nTiO₂. Some taxa responded differently to nAg and Ag⁺. This work shows how metal ENPs can impact soil enzyme activity and microbial community composition upon introduction into soils amended with biosolids, depending on their type, concentration, and dissolution behavior, hence providing much needed information for the sustainable application of nanotechnology in agriculture.