Bioaugmentation of membrane bioreactor with Achromobacter denitrificans strain PR1 for enhanced sulfamethoxazole removal in wastewater

Degradation of different wastewater by a biological sponge iron system: microbial growth and influencing factors

The bio-ZVI process has undergone widespread development in wastewater treatment in recent years. However, there has been limited examination of the growth and degradation characteristics of functional microorganisms within the system. In the present research, strains were isolated and identified from the bio-ZVI system constructed by sponge iron (encoded as SFe-M). The consistency of operating conditions in treating different wastewater was explored. Three SFe-acclimated microorganisms exhibiting characteristics of degrading organic pollutants and participating in the nitrogen removal process were isolated. The adaptation time of these microorganisms prolonged as the substrate toxicity increased, while the pollutant degradation was related to their metabolic rate in the logarithmic phase. All these functional bacteria exhibited the ability to treat wastewater in a wide pH range (5-8). However, the improper temperature (such as 10 °C and 40 °C) significantly inhibited their growth, and the optimal working temperature was identified as 30 °C. The iron dosage had a significant impact on these function bacteria, ranging from 1 g L-1 to 150 g L-1. It was inferred that the SFe-acclimated microorganisms are capable of resisting the poison of excessive iron, that is, they all have strong adaptability. The results provide compelling evidence for further understanding of the degradation mechanism involved in the bio-ZVI process.

Isolation, identification and whole-genome analysis of an Achromobacter strain with a novel sulfamethazine resistance gene and sulfamethazine degradation gene cluster

A sulfamethazine (SM2) degrading strain, Achromobacter mucicolens JD417, was isolated from sulfonamide-contaminated sludge using gradient acclimation. Optimal SM2 degradation conditions were pH 7, 36 °C, and 5 % inoculum, achieving a theoretical maximum degradation rate of 48 % at 50 ppm SM2. Cell growth followed the Haldane equation across different SM2 concentrations. Whole-genome sequencing of the strain revealed novel functional annotations, including a sulfonamide resistance gene (sul4) encoding dihydropteroate synthase, two flavin-dependent monooxygenase genes (sadA and sadB) crucial for SM2 degradation, and unique genomic islands related to metabolism, pathogenicity, and resistance. Comparative genomics analysis showed good collinearity and homology with other Achromobacter species exhibiting organics resistance or degradation capabilities. This study reveals the novel molecular resistance and degradation mechanisms and genetic evolution of an SM2-degrading strain, providing insights into the bioremediation of sulfonamide-contaminated environments.

New insights into bioaugmented removal of sulfamethoxazole in sediment microcosms: degradation efficiency, ecological risk and microbial mechanisms

BACKGROUND

Bioaugmentation has the potential to enhance the ability of ecological technology to treat sulfonamide-containing wastewater, but the low viability of the exogenous degraders limits their practical application. Understanding the mechanism is important to enhance and optimize performance of the bioaugmentation, which requires a multifaceted analysis of the microbial communities. Here, DNA-stable isotope probing (DNA-SIP) and metagenomic analysis were conducted to decipher the bioaugmentation mechanisms in stabilization pond sediment microcosms inoculated with sulfamethoxazole (SMX)-degrading bacteria (Pseudomonas sp. M2 or Paenarthrobacter sp. R1).

RESULTS

The bioaugmentation with both strains M2 and R1, especially strain R1, significantly improved the biodegradation rate of SMX, and its biodegradation capacity was sustainable within a certain cycle (subjected to three repeated SMX additions). The removal strategy using exogenous degrading bacteria also significantly abated the accumulation and transmission risk of antibiotic resistance genes (ARGs). Strain M2 inoculation significantly lowered bacterial diversity and altered the sediment bacterial community, while strain R1 inoculation had a slight effect on the bacterial community and was closely associated with indigenous microorganisms. Paenarthrobacter was identified as the primary SMX-assimilating bacteria in both bioaugmentation systems based on DNA-SIP analysis. Combining genomic information with pure culture evidence, strain R1 enhanced SMX removal by directly participating in SMX degradation, while strain M2 did it by both participating in SMX degradation and stimulating SMX-degrading activity of indigenous microorganisms (Paenarthrobacter) in the community.

CONCLUSIONS

Our findings demonstrate that bioaugmentation using SMX-degrading bacteria was a feasible strategy for SMX clean-up in terms of the degradation efficiency of SMX, the risk of ARG transmission, as well as the impact on the bacterial community, and the advantage of bioaugmentation with Paenarthrobacter sp. R1 was also highlighted. Video Abstract.

Ibuprofen-enhanced biodegradation in solution and sewage sludge by a mineralizing microbial consortium. Shift in associated bacterial communities

Ibuprofen (IBP) is a widely used drug of environmental concern as emerging contaminant due to its low elimination rates by wastewater treatment plants (WWTPs), leading to the contamination of the environment, where IBP is introduced mainly from wastewater discharge and sewage sludge used as fertilizer. This study describes the application of a consortium from sewage sludge and acclimated with ibuprofen (consortium C7) to accelerate its biodegradation both in solution and sewage sludge. 500 mg L-1 IBP was degraded in solution in 28 h, and 66% mineralized in 3 days. IBP adsorbed in sewage sludge (10 mg kg-1) was removed after bioaugmentation with C7 up to 90% in 16 days, with a 5-fold increase in degradation rate. This is the first time that bioaugmentation with bacterial consortia or isolated bacterial strains have been used for IBP degradation in sewage sludge. The bacterial community of consortium C7 was significantly enriched in Sphingomonas wittichii, Bordetella petrii, Pseudomonas stutzeri and Bosea genosp. after IBP degradation, with a special increase in abundance of S. wittichii, probably the main potential bacterial specie responsible for IBP mineralization. Thirteen bacterial strains were isolated from C7 consortium. All of them degraded IBP in presence of glucose, especially Labrys neptuniae. Eight of these bacterial strains (B. tritici, L. neptuniae, S. zoogloeoides, B. petrii, A. denitrificans, S. acidaminiphila, P. nitroreducens, C. flaccumfaciens) had not been previously described as IBP-degraders. The bacterial community that makes up the indigenous consortium C7 appears to have a highly efficient biotic degradation potential to facilitate bioremediation of ibuprofen in contaminated effluents as well as in sewage sludge generated in WWTPs.

Biochar-assisted degradation of oxytetracycline by Achromobacter denitrificans and underlying mechanisms

Contamination of the environment with large amounts of residual oxytetracycline (OTC) and the corresponding resistance genes poses a potential threat to natural ecosystems and human health. In this study, an effective OTC-degrading strain, identified as Achromobacter denitrificans OTC-F, was isolated from activated sludge. In the degradation experiment, the degradation rates of OTC in the degradation systems with and without biochar addition were 95.01-100% and 73.72-99.66%, respectively. Biochar promotes the biodegradation of OTC, particularly under extreme environmental conditions. Toxicity evaluation experiments showed that biochar reduced biotoxicity and increased the proportion of living cells by 17.36%. Additionally, biochar increased the activity of antioxidant enzymes by 34.1-91.0%. Metabolomic analysis revealed that biochar promoted the secretion of antioxidant substances such as glutathione and tetrahydrofolate, which effectively reduced oxidative stress induced by OTC. This study revealed the mechanism at the molecular level and provided new strategies for the bioremediation of OTC in the environment.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

The application of bioremediation in wastewater treatment plants for microplastics removal: a practical perspective

Wastewater treatment plants (WWTPs) play the role of intercepting microplastics in the environment and provide a platform for bioremediation to remove microplastics. Despite, this opportunity has not been adequately studied. This paper shows the potential ways microplastics-targeted bioremediation could be incorporated into wastewater treatment through the review of relevant literature on bioaugmentation of water treatment processes for pollutants removal. Having reviewed more than 90 papers in this area, it highlights that bioremediation in WWTPs can be employed through bioaugmentation of secondary biological treatment systems, particularly the aerobic conventional activated sludge, sequencing batch reactor, membrane bioreactor and rotating biological contactor. The efficiency of microplastics removal, however, is influenced by the types and forms of microorganisms used, the polymer types and the incubation time (100% for polycaprolactone with Streptomyces thermoviolaceus and 0.76% for low-density polyethylene with Acinetobacter iwoffii). Bioaugmentation of anaerobic system, though possible, is constrained by comparatively less anaerobic microplastics-degrading microorganisms identified. In tertiary system, bioremediation through biological activated carbon and biological aerated filter can be accomplished and enzymatic membrane reactor can be added to the system for deployment of biocatalysts. During sludge treatment, bioaugmentation and addition of enzymes to composting and anaerobic digestion are potential ways to enhance microplastics breakdown. Limitations of bioremediation in wastewater treatment include longer degradation time of microplastics, incomplete biodegradation, variable efficiency, specific microbial activities and uncertainty in colonization. This paper provides important insight into the practical applications of bioremediation in wastewater treatment for microplastics removal.

Toward emerging contaminants removal using acclimated activated sludge in the gravity-driven membrane filtration system

The occurrence of emerging contaminants is attracting widespread attention due to its potential threat to aquatic organisms and public health. Gravity-driven membrane (GDM) filtration can effectively eliminate water contamination with pathogenic microorganisms in rural areas while being challenged by various micro-pollutants (MPs). This study investigated the removal and transformation of sulfamethoxazole (SMX) in GDM for the first time, and pre-adding acclimated activated sludge was proposed to improve the removal of MPs. More rapid and higher SMX degradation was observed with pre-adding domestication sludge, and the system had better tolerance to SMX shocks. Besides, in the presence of domesticated sludge, more SMX metabolic pathways and better mineralization rates were obtained, which was related to more SMX-resistant bacteria and easier biodegradable carbon sources in the system. Pre-adding sludge also increased the richness and diversity of bacterial community, which provided higher removal efficiencies of conventional pollutants. Thus, the removal rates of DOC (14.7%), NH₄⁺-N (5.6%) and fluorescent substances were obviously improved compared with the control group. In this study, the crisis of MPs was tackled and the removal of conventional pollutants was enhanced by pre-adding domesticated sludge in GDM, which ensured the water quality in rural areas.

Studies on the activated sludge process crucial parameters controlling olive mill wastewater treatment

Olive mill wastewater (OMW) represents a severe environmental problem for Mediterranean producer countries. The release of OMW, in urban areas, in public sewerage system constitute a serious problem for wastewater treatment plant (WWTP) based on biological processes. This study delivers a critical and a comprehensive analysis on activated sludge biomass and process crucial parameters involved in the treatment of OMW. Principal component analysis (PCA) has been applied to master the relationship between activated sludge physiological state and process performances stability. After the acclimation step with easily biodegradable synthetic substrate (SS), increased OMW F/M mass ratio has been applied to the bioreactor (60 L) of experimental pilot-scale AS system in respect to its nominal capacity. PCA highlight two main periods, a first stressful period presented by G₁[T₀-T_10%], G₂[T_20%-T_30%] and G₃[T_40%-T_50%] AS microbial communities were very sensitive to substrate changes. This was manifested by low metabolic activity (OUR, SOUR and SOUR_inh), important drop in AS microbial communities content, an increase in soluble microbial products (SMP), a fluctuate performances in COD and total phenols abatements as well as in flocks settleability (SVI). Afterwards, a reestablishment second period presented by G₄[T_60%-T_100%] of key process parameters and AS biomass efficiency indices is reached. This period characterized by the substantial content, resistance and adaption of AS microbial communities to OMW as F/M. Succeeding optimal AS biomass and process performances, under stressful conditions, requires a precise knowledge and control of decisive parameters involved in OMW treatment and this study could be an efficient practical approach in case of OMW also for further toxic compounds.

Sulfonamide-metabolizing microorganisms and mechanisms in antibiotic-contaminated wetland sediments revealed by stable isotope probing and metagenomics

Sulfonamide (SA) antibiotics are ubiquitous pollutants in livestock breeding and aquaculture wastewaters, which increases the propagation of antibiotic resistance genes. Microbes with the ability to degrade SA play important roles in SA dissipation, but their diversity and the degradation mechanism in the field remain unclear. In the present study, we employed DNA-stable isotope probing (SIP) combined with metagenomics to explore the active microorganisms and mechanisms of SA biodegradation in antibiotic-contaminated wetland sediments. DNA-SIP revealed various SA-assimilating bacteria dominated by members of Proteobacteria, such as Bradyrhizobium, Gemmatimonas, and unclassified Burkholderiaceae. Both sulfadiazine and sulfamethoxazole were dissipated mainly through the initial ipso-hydroxylation, and were driven by similar microbes. sadA gene, which encodes an NADH-dependent monooxygenase, was enriched in the ¹³C heavy DNA, confirming its catalytic capacity for the initial ipso-hydroxylation of SA in sediments. In addition, some genes encoding dioxygenases were also proposed to participate in SA hydroxylation and aromatic ring cleavage based on metagenomics analysis, which might play an important role in SA metabolism in the sediment ecosystem when Proteobacteria was the dominant active bacteria. Our work elucidates the ecological roles of uncultured microorganisms in their natural habitats and gives a deeper understanding of in-situ SA biodegradation mechanisms.

Bibliometric analysis of microbial sulfonamide degradation: Development, hotspots and trend directions

Microbial sulfonamide degradation (MSD) is an efficient and safe treatment in both natural and engineered ecosystems. In order to systematically understand the research status and frontier trends of MSD, this study employed CiteSpace to conduct a bibliometric analysis of data from the Web of Science (WoS) and the China National Knowledge Infrastructure (CNKI) published from 2000 to 2021. During this time, China, Germany, Spain, the United States and Australia played leading roles by producing numerous high impact publications, while the Chinese Academy of Sciences was the leading research institution in this interdisciplinary research category. The Chemosphere was the top journal in terms of the number of citations. MSD research has gradually progressed from basic laboratory-based experiments to more complex environmental microbial communities and finally to deeper research on molecular mechanisms and engineering applications. Although multi-omics and synthetic community are the key techniques in the frontier research, they are also the current challenges in this field. A summary of published articles shows that Proteobacteria, Gammaproteobacteria, Burkholderiales and Alcaligenaceae are the most frequently observed MSD phylum, class, order and family, respectively, while Bacillus, Pseudomonas and Achromobacter are the top three MSD genera. To our knowledge, this study is the first to investigate the development and current challenges of MSD research, put forward future perspective, and form a relatively complete list of sulfonamide-degrading microorganisms for reference.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Effective removal of pharmaceutical impurities and nutrients using biocatalyst from the municipal wastewater with moving bed packed reactor

The presence of antibiotics in the wastewater is one of the important issues related to environmental management. In this study, antibiotics-degrading bacteria were screened from the enriched sewage sludge sample. Among the isolated bacterial strains, Bacillus subtilis AQ03 showed maximum antibiotic tolerance (>2000 ppm). The characterized strain B. subtilis AQ03 degraded sulfamethaoxazole and sulfamethoxine and the optimum nutrient and physical-factors were analyzed. B. subtilis AQ03 degraded 99.8 ± 1.3 % sulfamethaoxazole, and 93.3 ± 6.2 % sulfamethoxine. Sodium nitrate and ammonium chloride were improved antibiotics degradation (<90 %). The optimized conditions were maintained in a moving bed bioreactor for the removal of antibiotics and nutrients from the wastewater. The selected strain considerably produced proteases (109.4 U/mL), amylases (55.1 U/mL), cellulase (9.6 U/mL) and laccases (15.2). In moving bed reactor, sulfamethaoxazole degradation was maximum after 8 days (100 ± 1.5 %) and sulfamethoxazole (100 ± 0) was removed completely from wastewater after 10 days. In moving bed reactor, biological oxygen demand (92.1 ± 2.8 %), chemical oxygen demand (79.6 ± 1.2 %), nitrate (89.4 ± 3.9 %) and phosphate (91.8 ± 1.2) were removed from the wastewater along with antibiotics after 10 days of treatment. The findings indicate that the indigenous bacterial communities and the ability to survive in the presence of high antibiotic concentrations and xenobiotics. Moving bed bioreactor is useful for the removal of nutrients and antibiotics from wastewater.

Unique biocenosis as a foundation to develop a phytobial consortium for effective bioremediation of Cr(VI)-polluted waters and sediments

This paper analyzes a unique, aquatic phytobial biocenosis that has been forming naturally for over 20 years and operating as a filter for Cr(VI)-polluted groundwater. Our study presents a thorough taxonomic analysis of the biocenosis, including filamentous algae, vascular plants, and microbiome, together with the analysis of Cr accumulation levels, bioconcentration factors and other environmentally-significant parameters: siderophore production by bacteria, biomass growth of the plants or winter hardiness. Among 67 species identified in the investigated reservoir, 13 species were indicated as particularly useful in the bioremediation of Cr(VI)-polluted water and sediment. Moreover, three species of filamentous algae, Tribonema sp., and three easily culturable bacterial species were for the first time shown as resistant to Cr concentration up to 123 mg/dm3, i.e. 6150 times over the permissible level. The work presents a modern holistic phytobial consortium indispensable for the remediation of Cr(VI)-contaminated aquatic environment in temperate zones worldwide.

Efficient removal of pharmaceuticals from water using graphene nanoplatelets as adsorbent

Recently, pharmaceutical pollutants in water have emerged as a global concern as they give threat to human health and the environment. In this study, graphene nanoplatelets (GNPs) were used to efficiently remove antibiotics sulfamethoxazole (SMX) and analgesic acetaminophen (ACM) as pharmaceutical pollutants from water by an adsorption process. GNPs; C750, C300, M15 and M5 were characterized by high-resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction and Brunauer-Emmett-Teller. The effects of several parameters viz. solution pH, adsorbent amount, initial concentration and contact time were studied. The parameters were optimized by a batch adsorption process and the maximum removal efficiency for both pharmaceuticals was 99%. The adsorption kinetics and isotherms models were employed, and the experimental data were best analysed with pseudo-second kinetic and Langmuir isotherm with maximum adsorption capacity (Qm) of 210.08 mg g-1 for SMX and 56.21 mg g-1 for ACM. A regeneration study was applied using different eluents; 5% ethanol-deionized water 0.005 M NaOH and HCl. GNP C300 was able to remove most of both pollutants from environmental water samples. Molecular docking was used to simulate the adsorption mechanism of GNP C300 towards SMX and ACM with a free binding energy of -7.54 kcal mol-1 and -5.29 kcal mol-1, respectively, which revealed adsorption occurred spontaneously.

Bioaugmentation of Moving Bed Biofilm Reactor (MBBR) with Achromobacter JL9 for enhanced sulfamethoxazole (SMX) degradation in aquaculture wastewater

This study investigated whether bioaugmentation improves sulfamethoxazole (SMX) degradation and nitrogen removal in the Moving Bed Biofilm Reactor (MBBR) system. The effects of the C/N ratio on SMX degradation and nitrogen removal were also evaluated. Using MBBR system operation experiments, the bioaugmented reactor was found to perform more effectively than the non-bioaugmentation reactor, with the highest SMX, nitrate-N, and ammonia-N removal efficiencies of 80.49, 94.70, and 96.09%, respectively. The changes in the sulfonamide resistance genes and bacterial communities were detected at various operating conditions. The results indicate that the diversity of the bacterial communities and the abundance of resistance genes were markedly influenced by bioaugmentation and the C/N ratio, with Achromobacter among the dominant genera in the MBBR system. The bio-toxicity of samples, calculated as the inhibition percentage (IP) toward Escherichia coli, was found to decrease to non-toxic ranges after treatment.

Living with sulfonamides: a diverse range of mechanisms observed in bacteria

Sulfonamides are the oldest class of synthetic antibiotics still in use in clinical and veterinary settings. The intensive utilization of sulfonamides has been leading to the widespread contamination of the environment with these xenobiotic compounds. Consequently, in addition to pathogens and commensals, also bacteria inhabiting a wide diversity of environmental compartments have been in contact with sulfonamides for almost 90 years. This review aims at giving an overview of the effect of sulfonamides on bacterial cells, including the strategies used by bacteria to cope with these bacteriostatic agents. These include mechanisms of antibiotic resistance, co-metabolic transformation, and partial or total mineralization of sulfonamides. Possible implications of these mechanisms on the ecosystems and dissemination of antibiotic resistance are also discussed. KEY POINTS: • Sulfonamides are widespread xenobiotic pollutants; • Target alteration is the main sulfonamide resistance mechanism observed in bacteria; • Sulfonamides can be modified, degraded, or used as nutrients by some bacteria.

Parameter optimization of environmental technologies using a LCA-based analysis scheme: A bioaugmentation case study

Life cycle assessment (LCA) has proven to be a useful tool in assessing environmental technologies in a retrospective manner. To fully uncover the environmental improvement potential while advancing technologies under technical and environmental constraints, this study recommended approaching the LCA proactively to assess the progress of parameter optimization before determining critical parameters. To that end, the present work introduced a multimethod eight-step (MMES) analysis scheme, which included an integration of LCA with Plackett-Burman multifactorial design, central composite design, and multi-objective optimization. By creating a large number of scenarios through experimental design, we jointly optimized technical efficiency and environmental sustainability, which allowed for the identification of critical parameters that likely had contradictory influences on different objectives. Through a case study concerning the bioaugmentation of constructed wetland (CW), we applied the MMES scheme to optimize the culture conditions of the strain Arthrobacter sp. ZXY-2 for enhanced atrazine removal. The results showed that, by reducing the Na₂HPO₄·12H₂O concentration from 6.5 g/L to 6 g/L in the culture condition, we decreased the freshwater ecotoxicity potential and maintained a high level of atrazine removal. Regarding the production process of microbial inocula, the strain ZXY-2 grown at the optimized culture reduced the total environmental impact from 13% to 50% compared with the original culture and helped the CW exhibit more favorable atrazine-removal performance. Taken together, the case study demonstrated the effectiveness of using the MMES scheme for parameter optimization of environmental technologies. For future development, the MMES scheme should extend the application to more fields and refine uncertainty management.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Food-processing wastes

Literature published in 2018 and literature published in 2019 related to food-processing wastes treatment for industrial applications are reviewed. This review is a subsection of the Treatment Systems section of the annual Water Environment Federation literature review and covers the following food-processing industries and applications: general, meat and poultry, fruits and vegetables, dairy and beverage, and miscellaneous treatment of food wastes. PRACTITIONER POINTS: This article summarizes literature reviews published in 2018 and in 2019 related to food processing wastes treatment for industrial applications are reviewed. This review is a subsection of the Treatment Systems section of the annual Water Environment Federation literature review and covers the following food processing industries and applications: general, meat and poultry, fruits and vegetables, dairy and beverage, and miscellaneous treatment of food wastes.

Biodegradation of Amoxicillin, Tetracyclines and Sulfonamides in Wastewater Sludge

The removal of antibiotics from the aquatic environment has received great interest. The aim of this study is to examine degradation of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), amoxicillin (AMO), sulfamethazine (SMZ), sulfamethoxazole (SMX), sulfadimethoxine (SDM) in sludge. Four antibiotic-degrading bacterial strains, SF1 (Pseudmonas sp.), A12 (Pseudmonas sp.), strains B (Bacillus sp.), and SANA (Clostridium sp.), were isolated, identified and tested under aerobic and anaerobic conditions in this study. Batch experiments indicated that the addition of SF1 and A12 under aerobic conditions and the addition of B and SANA under anaerobic conditions increased the biodegradation of antibiotics in sludge. Moreover, the results of repeated addition experiments indicated that the efficiency of the biodegradation of antibiotics using the isolated bacterial strains could be maintained for three degradation cycles. Two groups of potential microbial communities associated with the aerobic and anaerobic degradation of SMX, AMO and CTC in sludge were revealed. Twenty-four reported antibiotics-degrading bacterial genera (Achromobacter, Acidovorax, Acinetobacter, Alcaligenes, Bacillus, Burkholderia, Castellaniella, Comamonas, Corynebacterium, Cupriavidus, Dechloromonas, Geobacter, Gordonia, Klebsiella, Mycobacterium, Novosphingobium, Pandoraea, Pseudomonas, Rhodococcus, Sphingomonas, Thauera, Treponema, Vibrio and Xanthobacter) were found in both the aerobic and anaerobic groups, suggesting that these 24 bacterial genera may be the major antibiotic-degrading bacteria in sludge.

From Laboratory Tests to the Ecoremedial System: The Importance of Microorganisms in the Recovery of PPCPs-Disturbed Ecosystems

The presence of a wide variety of emerging pollutants in natural water resources is an important global water quality challenge. Pharmaceuticals and personal care products (PPCPs) are known as emerging contaminants, widely used by modern society. This objective ensures availability and sustainable management of water and sanitation for all, according to the 2030 Agenda. Wastewater treatment plants (WWTP) do not always mitigate the presence of these emerging contaminants in effluents discharged into the environment, although the removal efficiency of WWTP varies based on the techniques used. This main subject is framed within a broader environmental paradigm, such as the transition to a circular economy. The research and innovation within the WWTP will play a key role in improving the water resource management and its surrounding industrial and natural ecosystems. Even though bioremediation is a green technology, its integration into the bio-economy strategy, which improves the quality of the environment, is surprisingly rare if we compare to other corrective techniques (physical and chemical). This work carries out a bibliographic review, since the beginning of the 21st century, on the biological remediation of some PPCPs, focusing on organisms (or their by-products) used at the scale of laboratory or scale-up. PPCPs have been selected on the basics of their occurrence in water resources. The data reveal that, despite the advantages that are associated with bioremediation, it is not the first option in the case of the recovery of systems contaminated with PPCPs. The results also show that fungi and bacteria are the most frequently studied microorganisms, with the latter being more easily implanted in complex biotechnological systems (78% of bacterial manuscripts vs. 40% fungi). A total of 52 works has been published while using microalgae and only in 7% of them, these organisms were used on a large scale. Special emphasis is made on the advantages that are provided by biotechnological systems in series, as well as on the need for eco-toxicological control that is associated with any process of recovery of contaminated systems.

New insight into the substituents affecting the peroxydisulfate nonradical oxidation of sulfonamides in water

The large consumption and discharge of sulfonamides (SAs) have potentially induced antibiotic resistance genes, posing inestimable threats to humans and ecosystems. In the present study, five SAs with different substituents were regarded as target compounds to be degraded using the nonradical dominated peroxydisulfate (PDS) activation process by the combination of ¹O₂ oxidation and direct electron transfer. The degradation rates, toxicities and pathways of SAs largely varied with their substituents. For instance, sulfathiazole with five-membered substituent had the highest degradation rate of 0.19 min^-1, which was 3.8 times as the rate of sulfanilamide (0.05 min^-1) without substituent. Then the theoretical calculation was adopted to further confirm that different substituents on the SAs could influence the molecular orbital distribution and their stability, thus resulting in the different removal rate of SAs. Finally, the products of different SAs were concisely deduced to take insight into the effects of different substituents on SAs degradation pathways. It was demonstrated that the geometrical differences among various SAs caused by the different substituents contributed to the different degradation pathways of SAs. Representatively, the special Smiles-type rearrangement pathway was occurred in the six-membered SAs instead of in the five-membered SAs, which inversely resulted in the slower degradation rate of six-membered SAs than the five-membered SAs. Thus, the present study provides a valuable insight into the effects of substituents on the degradation rate and transformation pathways of SAs in the nonradical PDS activation process.

Development of a moving-bed electrochemical membrane bioreactor to enhance removal of low-concentration antibiotic from wastewater

Removal of low-concentration (ng/L ~ μg/L) antibiotics from water calls for the development of cost-effective treatment technologies. In this study, a novel moving-bed electrochemical membrane bioreactor (MEMBR) was developed for removing sulfamethoxazole (SMX). Results showed that the introduction of external electric field and carbon felt particles could efficiently eliminate SMX (removal efficiency of 88.9%). In contrast, the moving-bed membrane bioreactor (MMBR) took a long time to acclimate microorganism, reaching a removal efficiency of 43.9%. Transmembrane pressure increase rate was much lower in MEMBR (1.06 kPa/d) compared to MMBR (1.72 kPa/d). The presence of carriers increased the generation of reactive oxygen species, contributing to SMX removal. Microbial community analysis revealed that the introduction of electric field could increase microbial community richness/diversity and enrich the phyla of Actinobacteria and Gemmatimonadete, potentially capable of mineralizing SMX. These results clearly demonstrated the potential of this novel MEMBR to be used for enhanced micropollutants removal from water/wastewater.

Effect of hydraulic retention time on micropollutant biodegradation in activated sludge system augmented with acclimatized sludge treating low-micropollutants wastewater

This research investigates the effect of hydraulic retention time (HRT) on micropollutant biodegradation of two-stage activated sludge (AS) system augmented with acclimatized sludge treating low-micropollutants wastewater. The experimental wastewater was a mixture of landfill leachate and agriculture wastewater, and HRT was varied between 24, 18, and 12 h. The results showed that, under 24 h HRT, the micropollutant biodegradation efficiencies were 87-93% for bisphenol A (BPA), 2,6-di-tert-butyl-phenol (2,6-DTBP), di-butyl-phthalate (DBP), di-(ethylhexyl)-phthalate (DEHP); 75-81% for carbamazepine (CBZ), diclofenac (DCF); and 88% for N,N-diethylmeta-toluamide (DEET). The degradation efficiencies were similar under 18 h HRT: 87-93% for BPA, 2,6-DTBP, DBP, DEHP; 75-80% for CBZ, DCF; and 80% for DEET. However, the efficiencies substantially declined under 12 h HRT: 71-93%, 55-60%, and 50%, respectively. Importantly, the findings revealed that HRT plays a crucial part in micropollutant biodegradation of bioaugmented AS system. More specifically, too short an HRT (12 h) results in low micropollutant removal efficiency, and too long an HRT (24 h) contributes to low daily throughput and high treatment operation cost. As a result, moderate HRT (18 h) is operationally and economically optimal for bioaugmented AS system treating low-micropollutants wastewater.

Insights into the Fate and Removal of Antibiotics in Engineered Biological Treatment Systems: A Critical Review

Antibiotics, the most frequently prescribed drugs of modern medicine, are extensively used for both human and veterinary applications. Antibiotics from different wastewater sources (e.g., municipal, hospitals, animal production, and pharmaceutical industries) ultimately are discharged into wastewater treatment plants. Sorption and biodegradation are the two major removal pathways of antibiotics during biological wastewater treatment processes. This review provides the fundamental insights into sorption mechanisms and biodegradation pathways of different classes of antibiotics with diverse physical-chemical attributes. Important factors affecting sorption and biodegradation behavior of antibiotics are also highlighted. Furthermore, this review also sheds light on the critical role of extracellular polymeric substances on antibiotics adsorption and their removal in engineered biological wastewater treatment systems. Despite major advancements, engineered biological wastewater treatment systems are only moderately effective (48-77%) in the removal of antibiotics. In this review, we systematically summarize the behavior and removal of different antibiotics in various biological treatment systems with discussion on their removal efficiency, removal mechanisms, critical bioreactor operating conditions affecting antibiotics removal, and recent innovative advancements. Besides, relevant background information including antibiotics classification, physical-chemical properties, and their occurrence in the environment from different sources is also briefly covered. This review aims to advance our understanding of the fate of various classes of antibiotics in engineered biological wastewater treatment systems and outlines future research directions.

An integrated bioaugmentation/electrocoagulation concept for olive mill wastewater management and the reuse in irrigation of biofuel plants: a pilot study

A consortium of highly degrading microorganisms was used in an integrated bioaugmentation/electrocoagulation process for treating olive mill wastewater. The system was investigated for treating 1 m³ day^-1, at a pilot scale, for 2 years; hydraulic loading rate and organic loading rate were 2880 l m^-2 day^-1 and 37,930 g COD m^-2 day^-1, respectively. Average removal efficiency for COD, oils, and total phenols was 63.9%, 85.2%, and 43.6%, respectively. The olive mill consortium, OMC, consisted of seven actinomycete strains. The strains were confirmed, by 16S rDNA analysis, to belong to five Streptomyces, one Kitasatospora, and one Micromonospora strains, at 100-99.06% similarities. Hydrolytic enzyme activities of OMC strains were remarkably higher for degrading cellulosic and lipid constituents (enzyme-cumulative indices, 14-16.1), than the phenolic constituents (indices, 4.1-6.5). The establishment of actinomycetes in the treatment system was indicated by their increased counts in the biofilm at the end of the biofilter, reaching 13-fold higher than that in the control bed. The treated effluent was toxic to the seedlings of Jatropha curcas (Jatropha) and Simmondsia chinensis (Jojoba). Though its application in irrigation of 3-year-old Jatropha shrubs, significantly, enhanced the fruit yield up to 1.85-fold higher than the control, without affecting the seed oil content, after 3-month application, the irrigated soil showed insignificant changes in its biochemical properties. This developed bioaugmentation/electrocoagulation process can treat wastewater with extremely high organic strength, while its approximate construction and operational costs are limited to 0.03 and 0.51 US$ m^-3, respectively. It produces a treated effluent that can be reused in irrigation of specific plants. Graphical abstract.

Oxygen Half-Saturation Constants for Pharmaceuticals in Activated Sludge and Microbial Community Activity under Varied Oxygen Levels

Aeration accounts for the largest energy demand in conventional activated sludge wastewater treatment. Emerging aeration control strategies for energy conservation have significantly reduced operational bulk liquid dissolved oxygen (DO) from above 2 mg/L to at or below 0.5 mg/L. As we move toward low DO treatment processes, there is a need to understand how low DO impacts the kinetics of micropollutant biotransformation. The objective of this study was to characterize the impact of DO concentration on pharmaceutical biotransformation rates via two approaches: (1) Determine oxygen half saturation constants that describe the community-wide impact of DO on biotransformation rates. (2) Evaluate shifts in the microbial community 16S rRNA pool due to DO concentration. Batch experiments were performed at several DO concentrations using biomass from a full-scale wastewater treatment plant. Results reveal that substantial reductions in bulk liquid DO concentrations to 0.5 mg-O₂/L are possible without compromising pharmaceutical biotransformation rates. Sequencing of cDNA generated from community rRNA revealed that diverse, low abundance community members may play important roles in pharmaceutical transformation. The results of this work advance our ability to predict and model the impact of DO on pharmaceutical biotransformations during wastewater treatment and identify taxonomic groups associated with those biotransformations.