Insights into the effects of carbon source on sequencing batch reactors: Performance, quorum sensing and microbial community

Effect of perfluorooctanoic acid on denitrifying phosphorus removal system under short-term stress

Perfluorooctanoic acid (PFOA), a novel contaminant, is extensively found in aquatic environments. However, the capability of the denitrifying phosphorus removal process to treat PFOA-containing wastewater, as well as its response mechanisms, are unclear. This study used batch experiments to assess the short-term impact of PFOA on denitrifying phosphorus removal systems. During a single cycle, the addition of PFOA predominantly enhanced phosphate removal in the system mainly by the anaerobic phosphorus release pathway, but had no substantial effect on nitrogen removal. COD removal efficiency has a substantial positive correlation with C6-HSL and C8-HSL concentrations. As the PFOA concentration increased, the ROS concentration and enzyme activity also increased, while the PN/PS ratio decreased, causing the sludge to become looser. At the beginning of the second cycle, the impact of PFOA on phosphorus removal efficiency shifted from promotion to inhibition. These findings shed fresh light on the influence of PFOA on the denitrifying phosphorus removal mechanism, potentially furthering its use in the treatment of fluoride-containing wastewater.

Carbon source driven microbial ecological behaviors achieving efficient synchronous elimination of nitrogen and sulfamethoxazole within MABR

As carbon source shaped microbial ecosystem, the limited information on microbial ecological behaviors and ecological interrelationships between nitrogen and antibiotics metabolism under carbon source blocked the achievement of efficient synchronous nitrogen and antibiotics removal. Four typical carbon sources were selected to investigate their impact on nitrogen and sulfamethoxazole (SMX) metabolism in a membrane-aerated biofilm reactor (MABR) system. Detailed ecological insights were obtained, including degradation pathways, microbiota composition, functional genes, and microbial interactions. The microbial community's carbon source preferences related to nitrogen and SMX metabolism, as well as their interrelationships under different carbon sources, were elucidated. Specifically, sucrose, providing a "gradual-releasing" energy source, promoted the abundance of Chryseobacterium and Paenarthrobacter, which facilitated the cleavage of the S-N bond in SMX and generated more small-molecule metabolites, enhancing SMX removal. Acetate, serving as a "first aid" energy source, resulted in multiple nitrogen metabolic pathways, leading to efficient nitrogen removal. Further, ecological networks revealed that sucrose caused superior SMX removal by enhancing metabolites cross-feeding between keystone N-cycling microbes (e.g., Paracoccus, Bdellovibrio) and keystone SMX degraders (e.g., Mycobacterium, Nocardioide), while acetate induced excellent nitrogen removal as it resulted in intensive complexity and connectivity within microbial ecosystem. Structural equation models (SEMs) analysis confirmed the dominant contribution of ecological networks complexity and cross-feeding on nitrogen and SMX removal than other ecological features. Based on fundamental insights, it was demonstrated that the acetate and sucrose mixture achieved more efficient SMX and nitrogen removal.

Harnessing Microbial Signal Transduction Systems in Natural and Synthetic Consortia for Biotechnological Applications

Signal transduction is crucial for communication and cellular response in microbial communities. Consortia rely on it for effective communication, responding to changing environmental conditions, establishing community structures, and performing collective behaviors. Microbial signal transduction can be through quorum sensing (QS), two-component signal transduction systems, biofilm formation, nutrient sensing, chemotaxis, horizontal gene transfer stress response, and so forth. The consortium uses small signaling molecules in QS to regulate gene expression and coordinate intercellular communication and behaviors. Biofilm formation allows cells to adhere and aggregate, promoting species interactions and environmental stress resistance. Chemotaxis enables directional movement toward or away from chemical gradients, promoting efficient resource utilization and community organization within the consortium. In recent years, synthetic microbial consortia have gained attention for their potential applications in biotechnology and bioremediation. Understanding signal transduction in natural and synthetic microbial consortia is important for gaining insights into community dynamics, evolution, and ecological function. It can provide strategies for biotechnological innovation for enhancing biosensors, biodegradation, bioenergy efficiency, and waste reduction. This review provides compelling insight that will advance our understanding of microbial signal transduction dynamics and its role in orchestrating microbial interactions, which facilitate coordination, cooperation, gene expression, resource allocation, and trigger specific responses that determine community success.

Efficient nitrogen removal by heterotrophic nitrification-aerobic denitrification yeast Candida boidinii L21: Performance, pathway and application

Efficient nitrogen removal yeasts are rarely encountered. Here, a heterotrophic nitrification-aerobic denitrification strain of Candida boidinii L21 was isolated. The optimal removal conditions for strain L21 were glucose as carbon source, C/N of 15, salinity of 10 ppt, pH of 7, shaking speed of 120 rpm, and temperature of 30 °C. Strain L21 removed NH4+-N, NO2--N, NO3--N (14---140 mg/L) and achieved nearly complete NO2--N, removal. Nitrogen balance and enzyme activity analysis indicated the nitrogen removal pathway of strain L21 through assimilation, nitrification, and denitrification pathways. When applied in wastewater and sludge, strain L21 reduced inorganic nitrogen levels within 4 days, with a 58-fold increase in nitrite removal compared to controls. These findings demonstrate that strain L21 holds great potential for enhancing nitrogen removal in wastewater treatment processes, providing valuable insights for improving environmental management practices.

Carbon metabolism characteristics of quorum quenching bacteria Rhodococcus sp. BH4 determine the bioaugmentation efficiency under different carbon source conditions

Carbon sources are critical factors influencing bacterial bioaugmentation, however, the underlying mechanisms, particularly the metabolic characteristics of bioaugmented bacteria remain poorly understood. The bioaugmented bacterium Rhodococcus sp. BH4 secretes the quorum quenching (QQ) enzyme QsdA to disrupt the quorum sensing (QS) in the activated sludge (AS) process, reducing AS yield in-situ. This study investigated the carbon metabolic characteristics of BH4 and explored the effects on bioaugmentation with different influent carbon sources. Because of the absence of glucose-specific phosphoenol phosphotransferase system (PTS), BH4 prefers sodium acetate to glucose. However, the lactones produced during extracellular glucose metabolism enhance BH4 qsdA expression. Moreover, BH4 possess carbon catabolite repression (CCR), acetate inhibits glucose utilization. BH4 microbeads were added to reactors with different carbon sources (R1: sodium acetate; R2: glucose; R3: a mixture of sodium acetate and glucose) for in-situ AS yield reduction. During operation, AS reduction efficiency decreased in the following order: R1 > R3 > R2. R2 and R3 microbeads exhibited similar QQ activity to R1, with less BH4 biomass at 5 d. 13C labeling and Michaelis-Menten equation showed that, due to differences in the competitiveness of carbon sources, R1 BH4 obtained the most carbon, whereas R2 BH4 obtained the least carbon. Moreover, acetate inhibited glucose utilization of R3 BH4. Transcriptome analysis showed that R1 BH4 qsdA expression was the lowest, R2 BH4 was the most serious form of programmed cell death, and the R3 BH4 PTS pathway was inhibited. At 10 d, R1 BH4 biomass and microbead QQ activity were higher than that in R3, and the R2 BH4 lost viability and QQ activity. This study provides new insights into bioaugmentation from the perspectives of carbon source competitiveness, carbon metabolism pathways, and CCR.

Production and Characterisation of an Exopolysaccharide by Bacillus amyloliquefaciens: Biotechnological Applications

The Bacillus amyloliquefaciens RT7 strain was isolated from an extreme acidic environment and identified. The biodegradation capabilities of the strain using different carbon sources (glucose, oleic acid, Tween 80, PEG 200, and the combination of glucose-Tween 80) were evaluated via an indirect impedance technique. The glucose-Tween 80 combination was further studied using nuclear magnetic resonance (NMR). The exopolysaccharide (EPS_RT7) that had been produced with the strain when biodegrading glucose-Tween 80 was isolated and characterised using different techniques (GC-MS, HPLC/MSMS, ATR-FTIR, TGA, and DSC), and its molecular weight was estimated. The results show that the average molecular weight of EPS_RT7 was approximately 7.0794 × 10⁴ Da and a heteropolysaccharide composed of mannose, glucose, galactose, and xylose (molar ratio, 1:0.5:0.1:0.1) with good thermostability. EPS_RT7 showed good emulsifying activity against different natural oils and hydrocarbons at high concentrations (2 mg/mL) and at the studied pH range (3.1-7.2). It also presented good emulsifying activity compared to that of commercial emulsifiers. Lastly, EPS_RT7 showed antioxidant capacity for different free radicals, a lack of cytotoxicity, and antioxidant activity at the cellular level. EPS_RT7 has promising applications in bioremediation processes and other industrial applications.

Bacterial Communication Coordinated Behaviors of Whole Communities to Cope with Environmental Changes

Bacterial communication plays an important role in coordinating microbial behaviors in a community. However, how bacterial communication organizes the entire community for anaerobes to cope with varied anaerobic-aerobic conditions remains unclear. We constructed a local bacterial communication gene (BCG) database comprising 19 BCG subtypes and 20279 protein sequences. BCGs in anammox-partial nitrification consortia coping with intermittent aerobic and anaerobic conditions as well as gene expressions of 19 species were inspected. We found that when suffering oxygen changes, intra- and interspecific communication by a diffusible signal factor (DSF) and bis-(3'-5')-cyclic dimeric guanosine monophosphate (c-di-GMP) changed first, which in turn induced changes of autoinducer-2 (AI-2)-based interspecific and acyl homoserine lactone (AHLs)-based intraspecific communication. DSF and c-di-GMP-based communication regulated 455 genes, which covered 13.64% of the genomes and were mainly involved in antioxidation and metabolite residue degradation. For anammox bacteria, oxygen influenced DSF and c-di-GMP-based communication through RpfR to upregulate antioxidant proteins, oxidative damage-repairing proteins, peptidases, and carbohydrate-active enzymes, which benefited their adaptation to oxygen changes. Meanwhile, other bacteria also enhanced DSF and c-di-GMP-based communication by synthesizing DSF, which helped anammox bacteria survive at aerobic conditions. This study evidences the role of bacterial communication as an "organizer" within consortia to cope with environmental changes and sheds light on understanding bacterial behaviors from the perspective of sociomicrobiology.

Mechanisms of interaction between polystyrene nanoplastics and extracellular polymeric substances in the activated sludge cultivated by different carbon sources

Nanoplastics (NPs) are ubiquitously present in wastewater treatment plants, which would be removed by the flocculation of extracellular polymeric substances (EPS) from activated sludge. However, the interaction mechanisms between NPs and EPS of activated sludge remain largely unexplored. This study investigated the interaction mechanisms between polystyrene nanoplastics (PS-NPs) and EPS with sodium acetate (NaAc), methanol (MeOH) and glucose (GLC) as carbon sources. The results showed that the functional group involved in the interactions between PS-NPs and EPS was the carbonyl of protein amide I region. The interaction between PS-NPs and EPS increased the β-sheets content, decreased the ratio of α-helix to (β-sheet + random coil), and changed the protein secondary structures to strong rigidity. This enhanced the flocculation of activated sludge cultivated by these three carbon sources. The flocculation between PS-NPs and EPS in activated sludge using NaAc as the carbon source was the strongest among these three carbon sources. Therefore, the degree of flocculation between NPs and EPS of activated sludge in wastewater treatment plants varies with carbon sources. This work provides a reference for the NPs removal mechanisms from wastewater, which will help to understand the migration behavior of MPs and NPs in wastewater treatment processes.

The changing C/N of aggressive aniline: Metagenomic analysis of pollutant removal, metabolic pathways and functional genes

In order to optimize the degradation of high-concentration aniline wastewater, the operation of sequencing batch bioaugmentation reactors with different aniline concentrations (200 mg/L, 600 mg/L, 1000 mg/L) was studied. The results showed that the removal rates of aniline and COD in the three reactors could reach 100%. When the aniline increased to 600 mg/L, the nitrogen removal efficiency reached the peak (51.85%). The increase of aniline inhibited the nitrification, while denitrification was enhanced due to the increase of C/N ratio. But this change was reversed by the toxicity of high concentrations of aniline. The metagenomic analysis showed that when the aniline concentration was 600 mg/L, the abundance distribution of microbial samples was more uniform. The improved of aniline concentration had led to the increase of aromatic compounds degradation metabolic pathways. In addition, the abundance of aniline degradation and nitrogen metabolism genes (dmpB, xylE, norB) was also promoted.

Control of aeration time in the aniline degrading-bioreactor with the analysis of metagenomic: Aniline degradation and nitrogen metabolism

The strategy of adjusting aeration time (5 h/6 h/7 h) was applied to the sequential batch reactors to optimize the treatment of aniline wastewater (600 mg/L) conveniently and economically. Three reactors degraded aniline effectively. The nitrogen removal ability of system with 6 h aeration time was better, performing the similar denitrification property as 5 h and nitrification performance as 7 h. Meanwhile, longer aeration time potentially damaged the sludge structure. The metagenomic analysis explained the micro-mechanism for the better performance of the system with 6 h aeration time. Appropriate aeration time was conducive to the enrichment of synergistic microflora, including aniline degrading-bacteria, heterotrophic nitrifiers and denitrifiers. Then, the tilt of environmental resources to these floras in the system was beneficial to the maximum value utilization of living substrates. Accordingly, these bacteria were more closely related to genes, resulting in higher expression of functional genes in the system.

Efficient utilization of Iris pseudacorus biomass for nitrogen removal in constructed wetlands: Combining alkali treatment

Aquatic plant biomass like Iris pseudacorus can be used as electron donor to improve denitrification performance in subsurface constructed wetlands. However, the phenomenon that the nitrogen removal rate declined in the terminal stage restricted the utilization of litters. In terms of this problem, this study investigated the performance of the used biomass through alkali treatment on nitrogen removal and analyzed the effect of alkali treatment on the component and structure of biomass and microbial community. The results showed that the alkali-treated biomass could further enhance the nitrogen removal by nearly 15% compared with used ones. The significant damage of cell walls and compact fibers containing cellulose and lignin through alkali treatment mainly resulted in the improvement of carbon release and nitrogen removal. With the addition of alkali-treated biomass, the richness index of microbes was higher compared with other biomass materials. Furthermore, the abundance of denitrification related genera increased and the abundance of genera for nitrification was maintained. Based on these finds, a mode of a more efficient Iris pseudacorus self-consumed subsurface flow constructed wetlands was designed. In this mode, the effluent total nitrogen could be stabilized below 5 mg L^-1 for nine months and the weight of litters could be further cut down by 75%. These findings would contribute to efficient utilization of plant biomass for nitrogen removal enhancement and final residue reduction in the wetlands.

Understanding the impacts of operation mode sequences on the biological aniline degradation system: Startup phase, pollutants removal rules and microbial response

Comparative evaluation of SBRs under different modes (AX/O, AN/AX/O, AN/O/AX, O/AX) with same aniline wastewater arrangements, presenting the startup and performance differences of reactors. The results revealed that the four systems realized the efficient aniline and NH₄⁺-N removal on the basis of sufficient aerobic time. Anaerobic aniline degradation was also achieved in the first three reactors after acclimation. The denitrification efficiency was the highest in O/AX reactor and the lowest in AN/O/AX due to mode sequence setup. Pollutants variations in the typical cycles experimental data combined with microbial diversity analysis were highlighted that aerobic denitrification contributed the most under O/AX mode, while the other three modes relied on anoxic denitrification. Meanwhile, low nitrifiers and aerobic denitrifiers abundance might be another reason for the poor denitrification of AN/O/AX mode. It was inferred that denitrification was most susceptible to operation mode sequences.

Relevance of Candidatus Nitrotoga for nitrite oxidation in technical nitrogen removal systems

Abstract

Many biotechnological applications deal with nitrification, one of the main steps of the global nitrogen cycle. The biological oxidation of ammonia to nitrite and further to nitrate is critical to avoid environmental damage and its functioning has to be retained even under adverse conditions. Bacteria performing the second reaction, oxidation of nitrite to nitrate, are fastidious microorganisms that are highly sensitive against disturbances. One important finding with relevance for nitrogen removal systems was the discovery of the mainly cold-adapted Cand. Nitrotoga, whose activity seems to be essential for the recovery of nitrite oxidation in wastewater treatment plants at low temperatures, e.g., during cold seasons. Several new strains of this genus have been recently described and ecophysiologically characterized including genome analyses. With increasing diversity, also mesophilic Cand. Nitrotoga representatives have been detected in activated sludge. This review summarizes the natural distribution and driving forces defining niche separation in artificial nitrification systems. Further critical aspects for the competition with Nitrospira and Nitrobacter are discussed. Knowledge about the physiological capacities and limits of Cand. Nitrotoga can help to define physico-chemical parameters for example in reactor systems that need to be run at low temperatures.

Key points

• Characterization of the psychrotolerant nitrite oxidizer Cand. Nitrotoga

• Comparison of the physiological features of Cand. Nitrotoga with those of other NOB

• Identification of beneficial environmental/operational parameters for proliferation

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-021-11487-5.

Impact of light on anoxic/oxic reactors: performance, quorum sensing, and metagenomic characteristics

The effect of light has raised attention on wastewater treatment. However, little research has concentrated on the influences of light on activated sludge. In this study, the influences of light on the performance, quorum sensing (QS) and metagenomic characteristics of anoxic/oxic reactors were investigated. The reactor without light (AO1) showed higher total nitrogen (TN) removal (79.15 ± 1.69%) than the reactor with light (AO2) (74.54 ± 1.30%), and significant differences were observed. It was observed that light facilitated the production of protein-like and tryptophan-like substances by employing parallel factor analysis for extracellular polymeric substance (EPS), resulting in more EPS production in AO2, indicating light was beneficial to EPS production. The concentrations of N-acyl-homoserine lactones (AHLs) were various in the two reactors, so the AHLs-mediated QS behaviors in both reactors were also different. These results revealed that light significantly influenced nitrogen removal, EPS, and QS. Metagenomic analysis based on Tax4Fun demonstrated that light reduced the denitrification, stimulated the polysaccharide and protein biosynthesis pathways and down-regulated the AHLs synthesis pathway, resulting in lower TN removal, more EPS production, and lower AHLs concentrations. Based on the above, the likely mechanism was proposed for the influences of light on the reactor.

A metagenomic view of how different carbon sources enhance the aniline and simultaneous nitrogen removal capacities in the aniline degradation system

To cross nitrogen removal barrier, carbon sources (sodium succinate (Z1), sodium acetate (Z2) and glucose (Z3)) were applied in aniline degradation reactor to enrich heterotrophic nitrifiers and denitrifiers. The aniline was degraded almost completely and the nitrogen removal performance was improved in three systems. The total nitrogen (TN) removal efficiency of Z2 was the highest. The dominant bacteria were phylum Proteobacteria, class BetaProteobacteria, and genus Thauera (Z1, Z3), Leptothrix (Z2). Different aniline degrading bacteria, heterotrophic nitrifiers and denitrifiers were enriched, and Z2 had more high-abundance communities. Three systems followed the meta-cleavage pathway for the aniline degradation according to the genes annotation. Particularly, the contribution of each genus to nitrogen metabolism and aromatic compounds degradation in the Z2 was more evenly distributed, rather than relying mainly on the contribution of Thauera in Z1 and Z3 so that more functional genes related nitrogen metabolism and aniline degradation were more abundant in Z2.

Sequencing batch reactor technology for landfill leachate treatment: A state-of-the-art review

Landfill has become an underlying source of surface and groundwater pollution if not efficiently managed, due to the risk of leachate infiltration into to land and aquifers. The generated leachate is considered a serious environmental threat for the public health, because of the toxic and recalcitrant nature of its constituents. Thus, it must be collected and appropriately treated before being discharged into the environment. At present, there is no single unit process available for proper leachate treatment as conventional wastewater treatment processes cannot achieve a satisfactory level for degrading toxic substances present. Therefore, there is a growing interest in examination of different leachate treatment processes for maximum operational flexibility. Based on leachate characteristics, discharge requirements, technical possibilities, regulatory requirements and financial considerations, several techniques have been applied for its degradation, presenting varying degrees of efficiency. Therefore, this article presents a comprehensive review of existing research articles on the pros and cons of various leachate degradation methods. In line with environmental sustainability, the article stressed on the application and efficiency of sequencing batch reactor (SBR) system treating landfill leachate due to its operational flexibility, resistance to shock loads and high biomass retention. Contributions of integrated leachate treatment technologies with SBR were also discussed. The article further analyzed the effect of different adopted materials, processes, strategies and configurations on leachate treatment. Environmental and operational parameters that affect SBR system were critically discussed. It is believed that information contained in this review will increase readers fundamental knowledge, guide future researchers and be incorporated into future works on experimentally-based SBR studies for leachate treatment.

Effects of humic acid on sludge performance, antibiotics resistance genes propagation and functional genes expression during Cu(II)-containing wastewater treatment via metagenomics analysis

The humic acid (HA) function on the sludge performance, antibiotics resistance genes (ARGs) propagation and functional genes expression during Cu(II)-containing wastewater treatment was comprehensively investigated via metagenomics analysis. Results showed that the pollutants removal was significantly inhibited after long-term exposure of 5 mg/L Cu(II), while the inhibitory effects were moderately alleviated after addition of 10 mg/L HA. The extracellular polymeric substances (EPS) production with Cu(II) acclimation was higher than the sludge with Cu(II) and HA acclimation. The microbial community was significantly affected by the HA addition, while the relative abundance of dominant ARGs had no distinct differences with or without HA addition under Cu(II) stress. The functional genes were largely implemented for microbial metabolism, while no significant differences were found with HA addition under Cu(II) stress. Thus, the HA function for ARGs propagation and functional genes expression needed to be further research under Cu(II) stress in wastewater treatment.

Rhizosphere bacterial and fungal communities succession patterns related to growth of poplar fine roots

Understanding the succession patterns of microbial community along root growth provides deep insights into interaction between fine roots and microbes. In the study, we investigated this issue using fine roots from poplar trees and grouped these fine roots into three growth stages: newborn white roots (WR), mature yellow roots (YR) and aging brown roots (BR). Root surface traits were observed under a scanning electron microscopy (SEM). Adhered soils on roots of the three growth stages were grouped into the three soil compartments, correspondingly. The 16S rRNA and ITS1 region were sequenced for bacteria and fungi inhabiting rhizosphere soils, respectively. Phospholipid fatty acid (PLFA) technology was employed to examine the biomass of bacterial and fungal communities. The anatomical traits of fine roots show apparent differences among the WR, YR and BR. Both bacteria and fungi have 25 dominant genera with a relative abundance over 1%, of which, four genera of the bacteria (Bacillus, Burkholderia, Ralstonia and Dyella) differ in abundance among the WR, YR and BR soil compartments and four genera of the fungi (Fusarium, Chaetomium, Penicillium and Scleroderma) differ in abundance among these soil compartments. The operational taxonomic units (OTUs) showed the highest richness in the WR soil compartment for bacteria and in the YR soil compartment for fungi, indicating a different succession pattern between the bacterial and fungal communities. Furthermore, the biomass of bacterial community is larger than the fungal community according to PLFAs, and both decreased along fine root growth. The total carbon (TC) in the soil increases along root growth while the dissolved organic carbon (DOC) decreases. Redundancy analysis (RDA) shows a close correlation between twelve dominant bacteria genera and the total organic carbon (TOC), the readily oxidizable organic carbon (ROC) and DOC and ten dominant fungi genera with the TOC and ROC. In conclusion, our results indicate that fine roots growth has shaped the composition and structure of root associated bacterial and fungal communities.

Exploring potential impact(s) of cerium in mining wastewater on the performance of partial-nitrification process and nitrogen conversion microflora

Cerium Ce(III) is one of the major pollutants contained in wastewater generated during Ce(III) mining. However, the effect(s) of Ce(III) on the functional genera responsible for removing nitrogen biologically from wastewater has not been studied and reported. In this study, the effects of Ce(III) on aspects of partial-nitritation-(PN) process including ammonia oxidation rate (AOR), process kinetics, and microbial activities were investigated. It was found that the effect of dosing Ce(III) in the PN system correlated strongly with the AOR. Compared to the control, batch assays dosed with 5 mg/L Ce(III) showed elevated PN efficiency of about 121%, an indication that maximum biological response was feasible upon Ce(III) dose. It was also found that, PN performance was not adversely affected, given that Ce(III) dose was ≤20 mg/L. Process kinetics investigated also suggested that the maximum Ce(III) dose without any visible inhibition to the activities of ammonium oxidizing bacteria was 1.37 mg/L, but demonstrated otherwise when Ce(III) dose exceeded 5.63 mg/L. Compared to the control, microbes conducted efficient Ce(III) removal (averaged 98.66%) via biosorption using extracellular polymeric substances (EPS). Notably, significant deposits of Ce(III) was found within the EPS produced as revealed by SEM, EDX, CLSM and FTIR. 2-dimensional correlation infrared-(2DCOS-IR) revealed ester group (uronic acid) as a major organic functional group that promoted Ce(III) removal. Excitation-emission matrix-(EEM) spectrum and 2DCOS-IR suggested the dominance of Fulvic acid, hypothesized to have promoted the performance of the PN process under Ce(III) dosage.

Performance and bacterial community structure of a novel inverse fluidized bed bioreactor (IFBBR) treating synthetic municipal wastewater

The performance of a lab-scale integrated anoxic and aerobic inverse fluidized bed bioreactors (IFBBR) for biological nutrient removal from synthetic municipal wastewater was studied at chemical oxygen demand (COD) loading rates of 0.34-2.10 kg COD/(m³-d) and nitrogen loading rates of 0.035-0.213 kg N/(m³-d). Total COD removal efficiencies of >84% were achieved, concomitantly with complete nitrification. The overall nitrogen removal efficiencies were >75%. Low biomass yields of 0.030-0.101 g VSS/g COD were achieved. Compared with other FBBR systems, the energy consumption for this IFBBR system was an average 59% less at organic loading rates (OLRs) of 1.02 and 2.10 kg COD/(m³-d). Bacterial community structures of attached and suspended biomass revealed that the dominant phyla were Proteobacteria, Bacteroidetes, and Epsilonbacteraeota, etc. The relative abundance of ammonia-oxidizing bacteria (AOBs) and nitrite-oxidizing bacteria (NOBs) in the aerobic attached biomass were 0.451% and 0.110%, respectively. COD mass balance in the anoxic zone was closed by consideration of sulfate reduction, which was confirmed by the presence of genus Chlorobium (sulfate-reducing bacteria) in the anoxic attached biofilm with a relative abundance of 0.32%.

Discrepant roles of a quorum quenching bacterium (Rhodococcus sp. BH4) in growing dual-species biofilms

Quorum quenching (QQ) is a promising alternative method for biofilm control. However, a largely unexplored issue is the mechanism through which QQ bacteria interact with biofilm-forming bacteria. Here, we explore inter-species interactions during biofilm development (using 96-well polystyrene plates in a static incubator) between the QQ bacterium Rhodococcus sp. BH4 and sludge bacteria. Experimental results revealed that strain BH4 provoked both competitive (76%) and cooperative (24%) interactions (P < 0.05) in dual-species biofilms after 24 h of incubation (mature biofilm), implying that signal destruction by strain BH4 was strain-dependent. Besides hike in the biofilm biomass (~21%), amount of extracellular polymeric substances (EPS) (25-30 times) and particle size (3.5 times) in the Serratia sp. JSB1 biofilm were increased by str. BH4. This suggests that strain BH4 may only have quenching effects against certain bacteria, and that such effects are overlooked at the community level. Taken together, present results imply that in a given biofilm community, not all QS-bacteria interact similarly with Rhodococcus sp. BH4, either because QS-bacteria are tolerant of strain BH4 or QS-bacteria have more than one mechanism for biofilm development. Overall, the QQ-strategy alone seems ineffective at controlling biofilm development, although it may be used in combination with other strategies.

Impact of the acetate/oleic acid ratio on the performance, quorum sensing, and microbial community of sequencing batch reactor system

This study comprehensively investigated the impact of acetate/oleic acid ratios (80%/20%, 60%/40%, 40%/60%, and 20%/80%) on sequencing batch reactor (SBR) with respect to the variations in performance, quorum sensing (QS), and microbial community. Results showed that NH⁺₄-N removal was not affected by the acetate/oleic acid ratios, while the COD, total nitrogen (TN), and PO^3-₄-P removal was considerably affected. The increasing oleic acid ratios led to severe sludge bulking, which was significantly positively correlated with proteins/polysaccharides (p < 0.001). The correlation of QS with the performance and sludge properties was also observed. High-throughput sequencing demonstrated that microbial compositions considerably shifted with varying acetate/oleic acid ratios. Moreover, the potential correlation of bacterial genera with the SBR performance and QS was proposed. This study elucidated the effect of acetate/oleic acid ratios on SBR from microbial viewpoint, which provided insights into fully understanding the essential roles of carbon source on wastewater treatment.