Transformation and release of nanoparticle additives & byproducts from commercially available surface coatings on pressure treated lumber via dermal contact

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Steam disinfection enhances bioaccessibility of metallic nanoparticles in nano-enabled silicone-rubber baby bottle teats, pacifiers, and teethers

Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles (NPs) directly exposed to infants and young children. However, the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown. Here, we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats, pacifiers, and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility (IVBA) of Ag and Zn in the articles. Nearly 89% articles had a mixture of Ag- and Zn-containing NPs and the teethers had relatively high Ag and Zn contents (up to 501 and 254 µg/g, respectively). Steam disinfection caused rubber decomposition into micro(nano)plastics (0.54-15.7 µm) and NP release from the interior of bulk rubber and micro-sized plastics, thus enhancing the IVBA of Ag and Zn by up to 5.5 times. The findings provide insights into mechanisms for NP release by steam disinfection. Though oral exposure risk assessment suggested low health concerns on individual metal release, our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.

Transformation of zinc oxide nanoparticles in synthetic lung fluids

Surface coatings, including paints, stains, and sealants, have recently become a focus of "nano-enabled" consumer product engineering. Specifically, zinc oxide (ZnO) nanoparticles (NPs) have been introduced to surface coatings to increase UV resistance. As more "nano-enabled" products are made available for purchase, questions arise regarding their long-term environmental and human health effects. This study tracked the transformation of NP additives commonly added to consumer paints and stains using ZnO NPs as a model system. During product application and use, there is a risk of inhalation of aerosolized ZnO NPs. To investigate the potential chemical interactions and transformations that would occur after inhalation, ZnO NPs were incubated in two synthetic lung fluids (SLFs). Initial studies utilized ZnO NPs dispersed in Milli-Q water (control), or a commercially available deck stain. Additionally, two commercially available products advertising the inclusion of ZnO NP additives were evaluated. Subsamples were taken throughout incubation and analyzed via atomic absorption spectroscopy to determine both the total (including particulate) zinc concentration and dissolved (non-particulate) zinc concentration. Results indicate that the vast majority of ZnO transformation takes place within the first 24 h of incubation and is primarily driven by SLF pH and composition complexity. Significant dissolution of ZnO NPs was observed when incubated in Gamble's solution (between 25 and 68% depending on the matrix. Additionally, all ZnO solutions saw near immediate dissolution (~ 98-100%) within 3 h of incubation in artificial lysosomal fluid. Results illustrate potential for NPs in consumer products to undergo significant transformation during use and exposure over short time periods.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11051-022-05527-y.

Food contact of paper and plastic products containing SiO2, Cu-Phthalocyanine, Fe2O3, CaCO3: Ranking factors that control the similarity of form and rate of release

The paper industry is an important sector annually consuming kilotons of nanoforms and non-nanoforms of fillers and pigments. Fillers accelerate the rate of drying (less energy needed) and product cost (increasing the load of low-cost fillers). The plastic industry is another use sector, where coloristic pigments can be in nanoform, and many food containers are made of plastic. Use of paper to wrap both wet and dry food is consumer practice, but not always intended by producers. Here we compare the release behavior of different nano-enabled products (NEPs) by changing a) nanoform (NF) characteristics, b) NF load, c) the nano-enabled product (NEP) matrix, and d) food simulants. The ranking of these factors enables an assessment of food contact by concepts of analogy, specifically via the similarities of the rate and form of release in food during contact. Three types of matrices were used: Paper, plastic ((Polylactic Acid (PLA), Polyamide (PA6), and Polyurethane (PU)), and a paint formulation. Two nanoforms each of SiO₂, Fe₂O₃, Cu-Phthalocyanine were incorporated, additionally to the conventional form of CaCO₃ that is always contained in paper to reduce cellulose consumption. Tests were guided by the European Regulation EC 1935/2004 and EU 10/2011. No evidence of particle release was observed: the qualitative similarity (the form of release) was high regarding the food contact of all NEPs with embedded NFs. Quantitative similarity of releases depended primarily on the NEP matrix, as this controls the penetration of the simulant fluid into the NEP. The solubility of the NF and impurities in the simulant fluid was the second decisive factor, as dissolution of the NF inside the NEP is the main mechanism of release. This led to complete removal of CaCO₃ in acidic medium, whereas Fe and Si signals remained in the paper, consistent with the low release rates in an ionic form. In our set of 16 NEPs, only one NEP showed a dependence on the REACH NF descriptors (substance, size, shape, surface treatment, crystallinity, impurities), specifically attributed to differences in soluble impurities, whereas for all others the substance of the nanoform was sufficient to predict a similarity of food contact release, without influences of size, shape, surface treatment and crystallinity.

Variation in zinc release from surface coatings as a function of methodology

Over the last decade the growth of "nano-enabled" products have exploded in both industrial and direct to consumer applications. One area of interest is surface coatings, including paints, stains and sealants. Large scale applications of the products raise questions about both short- and long-term effects to both human and environmental health. Release of nanoparticles (NPs) from surfaces as a function of dermal contact is recognized as a potential human exposure route. Several standardized methods to quantify nanomaterial release have been previously used. In the current study, two standardized method were used to quantify the total mass of NPs released during sampling. ZnO (NPs) were used as a case study as they are commonly added to surface coatings to increase UV resistance. Particles were dispersed in Milli-Q water or a deck stain and applied to sanded plywood surfaces. Total release of Zn due to simulated dermal contact was evaluated using the Consumer Product Safety Commission (CPSC) and National Institute for Occupational Safety and Health (NIOSH) wipe methods. Additionally, three different sampling materials were tested. The total quantity of Zn released between the two methods was dependent upon the material used and how the ZnO was applied to the surface. Critically, less than 3% of the ZnO NPs applied to test surfaces was removed using either method. The results of this study demonstrate how different testing methodologies may result in varying estimates of human and environmental risk from NPs in surface coatings.

Release and transformation of nanoparticle additives from surface coatings on pristine & weathered pressure treated lumber

As the market for "nano-enabled" products (NEPs) continues to expand in commercial and industrial applications, there is a critical need to understand conditions that promote release of nanomaterials and their degradation products from NEPs. Moreover, these studies must aim to quantify both the abundance and form (aggregates, ions, hybrids, etc.) of material released from NEPs to produce reasonable estimates of human and environmental exposure. In this work ZnO nanoparticles (NPs), a common additive in NEP surface coatings, were dispersed in Milli-Q water and a commercially available wood stain before application to pristine and weathered (outdoor 1 year) micronized copper azole pressure treated lumber (MCA). Coated lumber surfaces were sampled consecutively eight times using a method developed by the Consumer Product Safety Commission (CPSC) to track potential human exposure to ZnO NPs and byproducts through simulated dermal contact. Surprisingly, the highest total release of Zn was observed from aged lumber coated with ZnO NPs dispersed in wood stain, releasing 233 ± 26 mg Zn/m² over the course of all sampling events. Alternatively, separate leaching experiments using a synthetic precipitation solution to simulate environmental release found aged lumber released significantly less Zn than pristine lumber when using the same coating formulation. Zinc speciation analysis also demonstrates that transformation of crystalline ZnO to Zn-organic complexes shortly after application to aged lumber. Regardless of experimental treatment, the majority of applied zinc (>75%) remains on the MCA surface. Finally, this work highlights how the nature of the screening technique (dermal contact vs. leaching) may result in different interpretations of exposure and risk.