Low pressure modified polyamide 6 membrane for effective fractionation of dyes and NaCl

Organic solvent-free constructing of stable zeolitic imidazolate framework functional layer enhanced by halloysite nanotubes and polyvinyl alcohol on polyvinylidene fluoride hollow fiber membranes for treating dyeing wastewater

In this study, zeolitic imidazolate framework (ZIF-8)/polyvinylidene fluoride (PVDF) loose nanofiltration (NF) hollow fiber membranes were fabricated by constructing ZIF-8 functional layer on the PVDF supporting membranes based on the vacuum-assisted assembly process. The ZIF-8 synthesis was completed in a water system, and the synthesized ZIF-8 suspension was directly added to polyvinyl alcohol (PVA) and halloysite nanotubes (HNTs) aqueous solution system without drying to prepare the casting solution, which could solve the agglomeration and poor dispersion problem of ZIF-8 particles. In addition, the embedded HNTs and the loaded PVA among the ZIF-8 layer could improve the bonding strength between the ZIF-8 layer and the supporting membranes. After constructing ZIF-8 functional layer, the pore size of supporting membranes decreased from more than 300 nm to several nanometers. Furthermore, the water contact angle reduced from 91.1° to 54.2°. Applied to treat dye wastewater, the prepared ZIF-8/PVDF membranes maintained high dye rejection (˃99.0 %) for Congo red (CR), but low salt rejection for NaCl (about 2 %). In addition, the flux could reach 21.6 L m^-2h^-1 after continuous filtration 360 min, exhibiting a potential for treating the dye/salt wastewater. In particular, there were no organic solvents used in the work, which provided a promising idea for solvent-free fabrication of loose NF membranes.

Green preparation of polyvinylidene fluoride loose nanofiltration hollow fiber membranes with multilayer structure for treating textile wastewater

In this work, polyvinylidene fluoride (PVDF) loose nanofiltration (NF) hollow fiber membranes with multilayer structure were prepared successfully based on a solvent-free process. Graphene oxide (GO) was used to cover the interface pores of the pristine PVDF membranes via vacuum filtration, and polypyrrole (PPy) was polymerized on the surface to further decorate the membrane structure. Interestingly, the modified membranes exhibited a multilayer structure due to synergistic effect of GO and PPy. The structure and property of PVDF loose NF membranes were investigated in detail. After modifying by GO and PPy, the hydrophilicity improved obviously. Moreover, the molecular weight cut off (MWCO) was about 3580 Da, and the smallest pore size of skin layer decreased to 2.5-4 nm. Furthermore, the PVDF loose NF hollow fiber membranes presented a high dye rejection (˃98.5%) for negative dyes, whereas a low salt rejection for NaCl (about 4%), showing a great potential for separating dye/salt accurately. Specifically, there were not any solvent used in all the preparation processes. The work offered a novel strategy for green preparation of loose NF membranes.