Bioremediation of Olive Mill Wastewater sediments in evaporation ponds through in situ composting assisted by bioaugmentation

Effective microbial formulations using sustainable carriers for the remediation of plastic-affected soils

The increasing use of mulching films in intensive agriculture, together with their inefficient end-of-life disposal, has led to a significant plastic accumulation in soils, which contributes to disrupting ecosystems. The aim of this work was to determine the ability of different sustainable carriers to harbor and introduce plastic-degrading microorganisms into contaminated soils to provide a biotechnological tool that potentially enhances plastic decontamination, ameliorating the harmful effect of this type of pollutant in soil. To this end, pure cultures and co-cultures of Bacillus subtilis and Pseudomonas alloputida (specialized plastic-degrading strains) were added to three sustainable carriers (vermicompost, biochar, and calcium alginate beads) for the preparation of microbial formulations. After a storage period, the maintenance of cell viability and enzymatic activities related to the bioremediation potential of plastic materials of the inocula tested in the different microbial formulations (carrier + inoculant) were evaluated. The effectiveness of the formulations for plastic mineralization was tested by measuring CO2 emissions after two months. The results showed that biochar, followed by vermicompost, favored greater microbial survival (107 CFU g-1), while alginate formulations showed variable cell viability results, from 107 to 104 CFU g-1. Biochar also excelled in maintaining enzymatic activities related to plastic degradation, achieving the expression of 100% of the tested enzymes. Additionally, biochar-based formulations applied to soils contaminated with LLDPE plastic showed the highest mineralization rates, with statistically significant differences compared to the plastic-free control. These results lay the foundation for the development of new plastic decontamination technologies paving the way for the sustainable treatment of polluting and recalcitrant materials such as plastic.

Construction of versatile plastic-degrading microbial consortia based on ligninolytic microorganisms associated with agricultural waste composting

The accumulation of plastic in ecosystems is one of the most critical environmental concerns today. Plastic biodegradation using individual microbial cultures has shown limited success, which can be improved by employing microbial consortia with appropriate enzymatic capabilities. This study aims to assemble and characterize microbial consortia using ligninolytic fungi and bacteria isolated from an agricultural waste composting process, with the goal of enhancing the efficiency of plastic biodegradation. The compost microbiome demonstrated plastic-degrading functionality, particularly during the raw material and cooling phases. Ligninolytic microorganisms from compost were characterized for enzymes related to plastic degradation and their ability to colonize plastic films. The genera Bacillus, Pseudomonas, Fusarium, Aspergillus, Scedosporium, and Pseudallescheria exhibited a wide range of activities associated with plastic biodegradation, making them candidates for consortia assembly. The biodegradation of polyethylene using single and consortium cultures revealed that consortia, particularly those combining Bacillus subtilis RBM2 with Fusarium oxysporum RHM1, enhanced degradation efficiency. Additionally, consortia targeting multiple plastics, including virgin and recycled linear low-density polyethylene (LLDPE), polyethylene terephthalate (PET), and polystyrene (PS), showed varying levels of success, with bacterial-bacterial combinations such as Pseudomonas aeruginosa RBM21 and Bacillus subtilis RBM2 demonstrating broad-spectrum plastic degradation. These findings underscore the potential of compost-derived microorganisms for plastic biodegradation and suggest that utilizing microbial consortia offers a promising approach to tackling plastic pollution.

Air quality in olive mill wastewater evaporation ponds: Assessment of chemical and microbiological pollutants

Olive mill wastewater (OMW), a pollutant residue from the olive oil industry, is typically stored as sludge in evaporation ponds. This study examines the long-term emissions of OMW sludge and its impact on local air quality, analysing chemical pollutants like PM2.5, volatile organic compounds (VOCs), and trace elements (TEs), along with microbial communities (bacteria and fungi). The study also considered meteorological conditions and back-trajectories to identify sources of these elements. The ecological risk index (ERI) was found to be over 720 due to high Hg levels in the sludge (19.0 ± 0.9 ng/g) and air (0.28 ± 0.13 ng/m³), indicating a significant ecological threat. VOCs, particularly oxygenated compounds such as aldehydes and phenol, contributed to the area's strong odour. Meteorological conditions and Sahara dust intrusions influenced bioaerosol loads and seasonal bacterial diversity, whose composition is closely associated with VOC concentrations. The results could contribute to a better understanding of the environmental dynamics in the OMW sludge evaporation ponds, and they could also assist in formulating effective management strategies.

Innovation for recycling of organic matter through composter with automatic and sustainable temperature recording accessed via Bluetooth/mobile app

Compost reactors, commonly used in experiments, industrial assays, and home residue treatment systems, have the potential to facilitate composting. Challenges persist in the realm of small-scale composting, encompassing facets such as temperature monitoring, homogenization of the compost mass, management of moisture with the control of leachate generation, and integration with a renewable energy source. This study assesses a pioneering composter prototype endowed with essential features to ensure a pragmatic and secure composting process. This includes the facilitation of remote access to temperature data via Bluetooth and a mobile application. Across successive trials, the scrutinized composter prototype consistently yielded reproducible outcomes, exhibiting a coefficient of variation below 25% for the majority of appraised parameters. In comparison to a conventional reactor, the decomposing residue mixture within the examined prototype manifested elevated temperatures (p < 0.05). Moreover, the tested prototype demonstrated C/N ratio lower than 20/1 within 45 days, a higher final nitrogen concentration, and enhanced germination of seeds that served as phytotoxicity bioindicators. Notably, the prototype needed 46.6% less space, offering improved leachate control, three times faster turning time, temperature monitoring, and reduced fly attraction.

The response and factors of microbial aerosol emission from the sludge bio-drying process

Exposure to high levels of microbial contaminants during waste disposal leads to the development of various diseases, including respiratory symptoms and gastrointestinal infections. In this study, the emissions of airborne bacteria and fungi during the process of sludge bio-drying were investigated. The recorded emission levels of airborne bacteria and fungi were 2398 ± 1307 CFU/m3 and 1963 ± 468 CFU/m3, respectively. Viable bacteria were sized between 1.1 and 3.3 μm, while fungal particles were concentrated between 2.1 and 4.7 μm. High-throughput sequencing was used to conduct a microbial population assay, and correlation analysis was performed to estimate the relationship between key factors and bioaerosol emissions. The main bacteria identified were Bacillus sp., Lysinibacillus sp. YS11, unclassified Enterobacteriaceae, Brevundimonas olei, and Achromobacter sp.; the primary types of fungi were Aspergillus ochraceus, Gibberella intricans, Fusarium concentricum, Aspergillus qinqixianii, and Alternaria sp.; and the dominant opportunistic pathogens were Bacillus anthracis and Aspergillus ochraceus. At lower moisture and temperature levels, airborne bacterial concentrations were higher, especially the release of fine particles. In addition, moisture content had a significant impact on the microbial population in bioaerosols. This study provides insights into strategies for controlling bioaerosols in the exhaust gases of the sludge bio-drying process.

Microbial intervention improves pollutant removal and semi-liquid organo-mineral fertilizer production from olive mill wastewater sludge and rock phosphate

Olive mill wastewater sludge (OMWS) represents a residual pollutant generated by the olive oil industry, often stored in exposed evaporation ponds, leading to contamination of nearby land and water resources. Despite its promising composition, the valorization of OMWS remains underexplored compared to olive mill wastewater (OMW). This study aims to identify potent native microbial species within OMWS suitable for bioremediation and its transformation into a high-value organic fertilizer. The microbial screening, based on assessing OMWS tolerance and phosphate solubilization properties in vitro, followed by a singular inoculation using a mixture of OMWS and rock phosphate (RP). Identification of FUN 06 (Galactomyces Geotrichum), a fungal species, employed as an inoculant in the treatment of sterile OMWS supplemented with RP. Results demonstrate that fungal inoculation notably diminished OMWS phytotoxicity while enhancing its physicochemical parameters, nutrient concentrations, and removal of toxic organic compounds by up to 90% compared to the control, and enhances plant growth, offering a sustainable approach to tackle environmental concerns. Additionally, metataxonomic analysis unveiled FUN 06's propensity to enhance the presence of microbial species engaged in pollutant degradation. However, higher RP dosage (10%) appeared to adversely affect bioprocess efficiency, suggesting a potential dose-related effect. Overall, FUN 06, isolated from OMWS evaporation ponds, shows promise for effective bioremediation and sustainable reuse. In fact, our results indicate that targeted microbial inoculation stands as an effective strategy for mitigating pollutants in OMWS, facilitating its conversion into a nutrient-rich organo-mineral fertilizer suitable for direct use, promoting its beneficial reuse in agriculture, thereby presenting a promising avenue for olive oil waste management.

Enhancing earthworm (Lumbricus terrestris) tolerance to plastic contamination through gut microbiome fortification with plastic-degrading microorganisms

Microorganisms from L. terrestris gut previously exposed to different types of plastic (PET, LDPE, LLDPE, and PS) were studied to be used as probiotics of earthworms in plastic-contaminated soils (LDPE, LLDPE and recycled mulching film) at mesocosm-scale trials. The most abundant morphotypes with enzymatic capacities of interest were identified. Pseudomonas alkylphenolica (PL4) and Pseudomonas putida (PL5) strains were selected to be used as inoculants using Morus alba leaves as carriers to strengthen the intestinal microbiota of earthworms. Culture (selective cetrimide agar medium) and molecular (qPCR) techniques were used to trace the presence of the inoculum in the intestine of the earthworms. Additionally, a metataxonomic analysis was carried out to study the biodiversity and functionality of the earthworm microbiome, and their measure of survival and weight. Probiotics improved the survival rates of earthworms exposed to plastics, which also increased the abundance of microbial groups of interest in plastic bioremediation tasks.

Recent advances in microbial engineering approaches for wastewater treatment: a review

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Sustainable approach to the control of airborne phytopathogenic fungi by application of compost extracts

The search for new sustainable alternatives for plant disease control has gained interest in the last decades. Compost extracts are nowadays considered a remarkable alternative to agrochemicals due to their biopesticidal properties. However, these properties could be affected by the different variables of extraction protocols and by starting compost. This work focused on the physicochemical and biological characterization of compost extracts obtained from a wide range of composted materials and different extraction protocols (CEP). CEP-1 and CEP-4 involved incubation at 20 °C for 48 h and 14 days, respectively; CEP-2 incubation for 24 h at 40 °C; while CEP-3 were incubated for 12 h at 70 °C. Electrical conductivity, pH, total organic carbon (TOC) and phenolic content were determined as well as the actinobacterial count and enzyme profiles related to plant pathogen suppression. Additionally, the influence of the different materials and protocols on the in vitro growth inhibition of Alternaria alternata and Botrytis cinerea was determined. The starting materials and extraction protocols significantly influenced the physicochemical and biological characteristics of extracts. Treatments based on long incubation times at 20 °C, as well as those based on short incubation times at 40 °C, resulted in extracts with increased suppressive properties. However, extracts derived from CEP-3 protocol were characterized by high phenolic and TOC content, low functional biodiversity, and a more discreet antagonistic capacity. Therefore, the development and optimization of suitable extraction protocols could lead to compost extracts with increased phytoprotective capacities, thus becoming an effective and sustainable alternative to chemical inputs.

Pharmaceutical active compounds in sewage sludge: Degradation improvement and conversion into an organic amendment by bioaugmentation-composting processes

Around 143,000 chemicals find their fate in wastewater treatment plants in the European Union. Low efficiency on their removal at lab-based studies and even poorer performance at large scale experiments have been reported. Here, a coupled biological technology (bioaugmentation and composting) is proposed and proved for pharmaceutical active compounds degradation and toxicity reduction. The optimization was conducted through in situ inoculation of Penicillium oxalicum XD 3.1 and an enriched consortium (obtained from non-digested sewage sludge), into pilot scale piles of sewage sludge under real conditions. This bioaugmentation-composting system allowed a better performance of micropollutants degradation (21 % from the total pharmaceuticals detected at the beginning of the experiment) than a traditional composting process. Particularly, inoculation with P. oxalicum allowed the degradation of some recalcitrant compounds like carbamazepine, cotinine and methadone, and also produced better stabilization features in the mature compost (significant passivation of copper and zinc, higher macronutrients value, adequate physicochemical conditions for soil direct application and less toxic effect on germination) compared to the control and the enriched culture. These findings provide a feasible, alternative strategy to obtain a safer mature compost and a better removal of micropollutants performance at large scale.

Olive mill waste sludge: From permanent pollution to a highly beneficial organic biofertilizer: A critical review and future perspectives

Olive mill wastewater sludge (OMWS) is a by-product of the olive extraction process that is attracting substantial attention due to its extremely hazardous effects on aquatic and terrestrial ecosystems. OMWS is a product of the common disposal method of olive oil mill wastewater (OMWW) that accumulates in evaporation ponds. It is estimated that approximately 10 × 10⁶ m³ of OMWS is generated worldwide each year. OMWS is characterized by its significantly variable physicochemical properties and organic pollutant constituents, such as phenols and lipids, which are dependent upon the environmental features of the receiving ponds. Nonetheless, many related studies have recognized the biofertilizer potential of this sludge owing to its high mineral nutrient and organic matter load. OMWS exhibits promising valorization potential in several fields, including agriculture and energy production. Compared to those of OMWW, studies of OMWS are still lacking concerning its composition and characteristics, which are necessary for the future implementation of efficient valorization strategies. The main purpose of this review paper is to fill the gap that exists in the literature by providing a critical analysis of the available data on OMWS production, distribution, characteristics, and properties. Additionally, this work sheds light on important factors affecting OMWS properties, including the variability of the indigenous microbial communities regarding bioremediation. Finally, this review addresses the current and future valorization routes, from detoxification to the development of promising applications in agriculture, energy, and the environment, which could have significant socioeconomic implications for low-income Mediterranean countries.

Development of plastic-degrading microbial consortia by induced selection in microcosms

The increase in the production of highly recalcitrant plastic materials, and their accumulation in ecosystems, generates the need to investigate new sustainable strategies to reduce this type of pollution. Based on recent works, the use of microbial consortia could contribute to improving plastic biodegradation performance. This work deals with the selection and characterization of plastic-degrading microbial consortia using a sequential and induced enrichment technique from artificially contaminated microcosms. The microcosm consisted of a soil sample in which LLDPE (linear low-density polyethylene) was buried. Consortia were obtained from the initial sample by sequential enrichment in a culture medium with LLDPE-type plastic material (in film or powder format) as the sole carbon source. Enrichment cultures were incubated for 105 days with monthly transfer to fresh medium. The abundance and diversity of total bacteria and fungi were monitored. Like LLDPE, lignin is a very complex polymer, so its biodegradation is closely linked to that of some recalcitrant plastics. For this reason, counting of ligninolytic microorganisms from the different enrichments was also performed. Additionally, the consortium members were isolated, molecularly identified and enzymatically characterized. The results revealed a loss of microbial diversity at each culture transfer at the end of the induced selection process. The consortium selected from selective enrichment in cultures with LLDPE in powder form was more effective compared to the consortium selected in cultures with LLDPE in film form, resulting in a reduction of microplastic weight between 2.5 and 5.5%. Some members of the consortia showed a wide range of enzymatic activities related to the degradation of recalcitrant plastic polymers, with Pseudomonas aeruginosa REBP5 or Pseudomonas alloputida REBP7 strains standing out. The strains identified as Castellaniella denitrificans REBF6 and Debaryomyces hansenii RELF8 were also considered relevant members of the consortia although they showed more discrete enzymatic profiles. Other consortium members could collaborate in the prior degradation of additives accompanying the LLDPE polymer, facilitating the subsequent access of other real degraders of the plastic structure. Although preliminary, the microbial consortia selected in this work contribute to the current knowledge of the degradation of recalcitrant plastics of anthropogenic origin accumulated in natural environments.

Improving suppressive activity of compost on phytopathogenic microbes by inoculation of antagonistic microorganisms for secondary fermentation

Antimicrobial activity contributes to plant disease control property of composts but its source is still not clear. From composting cow manure during secondary fermentation, 50 microbial strains with antifungal activity were isolated and identified. Two bacterial strains Bacillus mojavensis B282 and Pseudomonas aeruginosa F288, antagonistic against both phytopathogenic fungi and bacteria, were respectively used as the inoculum of compost for secondary fermentation. Inoculation of B282 or F288 significantly shifted microbial community structure of compost and genera functionally linked to antagonistic activity and plant growth promotion were enriched. Notably, culturable cells of B282 increased by about 40 times during secondary fermentation. The inoculation of each strain significantly increased antifungal activity of compost extracts and enhanced disease suppressive effects of compost on wheat root rot. This study demonstrates that inoculation of compost-indigenous microorganisms could improve antimicrobial activity of compost and provides a low-cost strategy for producing bio-organic fertilizers with biocontrol function.

Insight into the dynamic microbial community and core bacteria in composting from different sources by advanced bioinformatics methods

Microbial communities are important for high composting efficiency and good quality composts. This study was conducted to compare the changes of physicochemical and bacterial characteristics in composting from different raw materials, including chicken manure (CM), duck manure (DM), sheep manure (SM), food waste (FW), and vegetable waste (VW). The role and interactions of core bacteria and their contribution to maturity in diverse composts were analyzed by advanced bioinformatics methods combined sequencing with co-occurrence network and structural equation modeling (SEM). Results indicated that there were obviously different bacterial composition and diversity in composting from diverse sources. FW had a low pH and different physiochemical characteristics compared to other composts but they all achieved similar maturity products. Redundancy analysis suggested total organic carbon, phosphorus, and temperature governed the composition of microbial species but key factors were different in diverse composts. Network analysis showed completely different interactions of core bacterial community from diverse composts but Thermobifida was the ubiquitous core bacteria in composting bacterial network. Sphaerobacter and Lactobacillus as core genus were presented in the starting mesophilic and thermophilic phases of composting from manure (CM, DM, SM) and municipal solid waste (FW, VW), respectively. SEM indicated core bacteria had the positive, direct, and the biggest (> 80%) effects on composting maturity. Therefore, this study presents theoretical basis to identify and enhance the core bacteria for improving full-scale composting efficiency facing more and more organic wastes.

Biorecovery of olive mill wastewater sludge from evaporation ponds

Olive mill wastewater (OMW) resulting from the olive oil extraction process is usually disposed of in evaporation ponds where it concentrates generating a sludge that pollutes the ponds nearby area. In this study, four bio-treatments were applied for the in-situ bioremediation and valorization of OMW sludge: Landfarming, phytoremediation, composting and vermicomposting. In all cases, the OMW sludge was added with organic residues (mushroom compost, rabbit manure, and chicken manure). The bio-treatments were carried out in duplicate, inoculated and non-inoculated, to determine the effect of a specialized fungal consortium (Aspergillus ochraceus H2 and Scedosporium apiospermum H16) on the efficacy of the bio-treatments. The evaluation of chemical parameters, toxicity, and functional microbial biodiversity revealed that the four techniques depleted the toxicity and favored the stimulation of functional microbiota. Landfarming and phytoremediation allowed the decontamination and improvement of soils. Composting and vermicomposting also offered high-quality products of agronomic interest. Inoculation improved the bioremediation effectiveness. Biological treatments are effective for the safe recovery of contaminated OMW sludge into high-quality services and products.

Aerobic composting of chicken manure with amoxicillin: Alpha diversity is closely related to lipid metabolism, and two-component systems mediating their relationship

Composting is a technology that can use various functional microorganisms to degrade antibiotics. However, antibiotics will cause a coercion for the growth of most microorganisms. Microorganism can survive different environments, thanks to the development of different adaptive responses. Often, two-component systems sense changes in the environment and trigger a cellular response and adaptation. Therefore, the main purpose of this study was to explore how the two-component system modulates the corresponding metabolic functions to affect alpha diversity during composting. The results show that amoxicillin increases species diversity, reduces species richness. Lipid metabolism is an important metabolic pathway mediating changes in alpha diversity. Two-component system indirectly affects alpha diversity by regulating lipid metabolism. Firmicutes are important microbial communities mediating changes in alpha diversity This work presents an understanding of the impact of environmental information processing on microbial diversity, during composting.

Degradation and detoxification of reactive yellow dyes by Scedosporium apiospermum: a mycoremedial approach

Textile industrial effluents have long enunciated the essentiality of ascertaining an efficient wastewater treatment for the removal of azo dyes given their potential disturbances on the ecosystem. Our study investigated the efficiency of the strain SKF2 among 14 other isolates, molecularly identified to be Scedosporium apiospermum, isolated by our research group from the textile effluent sludge in the degradation of two azo dyes, Reactive Yellow 145 and Remazol Yellow RR. Kinetic profiling of the degradation process revealed the decolourisation efficiency to be 94.8 and 86.9% for RY 145 and RYRR, respectively, during the declining growth phase. Laccase and polyphenol oxidase (RY 145-2.37 and RYRR-2.30 U/mL; RY 145-3.26 and RYRR-2.89 U/mL, respectively) were found to influence the biodegradation process in both the dyes than the other examined fungal degradative enzymes. The metabolic pathway predicted with the aid of GC-MS analysis identified the degraded metabolites to be smaller molecular weight non-toxic products. Assessment of toxicity via brine shrimp lethality assay (RY 145-23.3% and RYRR-16.7%, respectively) and seed germination assay (RY 145-96.7% and RYRR-83.3%) further solidified the detoxified status of both the dyes after biodegradation. The experimental data thus substantiated the expediency of S. apiospermum SKF2 in the degradation of textile azo dyes and its further employment in the bioremediation of textile wastewaters for agricultural applications and ecological recycling.

Improved degradation of petroleum hydrocarbons by co-culture of fungi and biosurfactant-producing bacteria

Microbial remediation has proven to be an effective technique for the cleanup of crude-oil contaminated sites. However, limited information exists on the dynamics involved in defined co-cultures of biosurfactant-producing bacteria and fungi in bioremediation processes. In this study, a fungal strain (Scedosporium sp. ZYY) capable of degrading petroleum hydrocarbons was isolated and co-cultured with biosurfactant-producing bacteria (Acinetobacter sp. Y2) to investigate their combined effect on crude-oil degradation. Results showed that the surface tension of the co-culture decreased from 63.12 to 47.58 mN m^-1, indicating the secretion of biosurfactants in the culture. Meanwhile, the degradation rate of total petroleum hydrocarbon increased from 23.36% to 58.61% at the end of the 7-d incubation period. In addition, gas chromatography - mass spectrometry analysis showed a significant (P < 0.05) degradation from 3789.27 mg/L to 940.33 mg/L for n-alkanes and 1667.33 μg/L to 661.5 μg/L for polycyclic aromatic hydrocarbons. Moreover, RT-qPCR results revealed the high expression of alkB and CYP52 genes by Acinetobacter sp. Y2 and Scedosporium sp. ZYY respectively in the co-culture, which corelated positively (P < 0.01) with n-alkane removal. Finally, microbial growth assay which corresponded with Fluorescein diacetate hydrolysis activity, highlighted the synergistic behavior of both strains in tackling the crude oil. Findings in this study suggest that the combination of fungal strain and biosurfactant-producing bacteria effectively enhances the degradation of petroleum hydrocarbons, which could shed new light on the improvement of bioremediation strategies.

A critical review of environmental and public health impacts from the activities of evaporation ponds

Evaporation ponds (EVPs) are among the most cost-effective, and simple wastewater treatment technologies used in many regions/countries with high solar radiation levels. However, its operational limitations, which include the overflow of wastewater, leakages via liners, and large surface area of the EVP that is exposed to atmosphere, creates a negative feedback to the environment. Therefore, the main aim of this review study of more than a hundred works published a little all over the continents is to provide a summary of various contaminations that are associated with EVPs activities through different environmental compartments. In addition, the impacts of EVP on fauna, human health including the current on-site sustainable mitigation strategies were also reviewed. The first conclusion from this study shows that the most commonly contaminants released into surface waters, groundwater, soil and sediments were heavy metals, pesticides, herbicides, selenium, including several major anions and cations. Non-methane hydrocarbons (NMHCs), volatile organic compounds (VOCs), and particulate matters (PMs) were the main air pollutants emitted from the surfaces of an EVP. Limited data is available about the emissions of atmospheric greenhouse gas (GHGs) especially carbon dioxide (CO₂) and methane (CH₄) from EVP surfaces. Migratory birds and aquatic organisms are the most vulnerable fauna as EVP wastewaters can cause obstruction of movements, affect diversity, and causes mortalities following the exposure to the toxic wastewater. The study revealed limited data about the potential health risk associated with occupational and environmental exposure to radiological hazards and contaminated drinking water from EVP activities. On-site EVP treatment strategies using bioremediation and electrochemical treatment technologies have shown to be a promising sustainable mitigation approach. Knowledge gaps in areas of GHGs monitoring/modeling, pollution exposure estimation and health risk assessments are urgently required to gain deeper understanding about the impact of EVP activities, and incorporate them into future EVP designs.

Bioaugmentation Technology for Treatment of Toxic and Refractory Organic Waste Water Based on Artificial Intelligence

With the development of modern chemical synthesis technology, toxic and harmful compounds increase sharply. In order to improve the removal efficiency of refractory organic matter in waste water, the method of adding powdered activated carbon (PAC) to the system for adsorption was adopted. Through the analysis of organic matter removal rule before and after waste water treatment, it can be found that PAC is easy to adsorb hydrophobic organic matter, while activated sludge is easy to remove hydrophilic and weakly hydrophobic neutral organic matter. Powdered activated carbon-activated sludge SBR system (PAC-AS) system is obviously superior to AS and PAC system in removing organic matter of hydrophilic and hydrophobic components, that is, biodegradation and PAC adsorption are additive. Compared with the control system, the Chemical Oxygen Demand (COD) removal rate of refractory substances increased by 8.36%, and PAC had a good adsorption effect on small molecular weight organic compounds, but with the increase of molecular weight of organic compounds, the adsorption effect of PAC gradually weakened, and it had no adsorption effect on macromolecular organic compounds. Based on the research of fuzzy control theory, an Agent control system for ozone oxidation process of industrial waste water based on Mobile Agent Server (MAS) theory was established, which was realized by fuzzy control method. The simulation results showed strong stability and verified the feasibility and adaptability of the distributed intelligent waste water treatment system based on MAS theory in the actual control process.

Microbial communities of the olive mill wastewater sludge stored in evaporation ponds: The resource for sustainable bioremediation

Olive Mill Wastewater (OMW) is a polluting residue from the olive oil industry. It is usually stored in open-air unprotected evaporation ponds where their sediments accumulate. This study compares the characteristics of OMW sludges stored for long-time in evaporation ponds and assesses their impact on the underlying soil layer. Physicochemical parameters, toxicity bioassays, and full characterization of the microbial community were analyzed. The extension of the polluting effects was assessed by analysis of toxicity, microbial biomass carbon, and respiration. Geostatistics was used to predict their spatial distribution. Organic matter and polyphenol content besides toxicity levels determine variations between OMW sludges and have a high impact on the microbiota they contain. The microbial community was abundant, diverse, and functionally active. However, the biodegradability of the sludges was hindered by the toxicity levels. Toxicity and biomass carbon were higher on the surface of the ponds than in the soil layer revealing a reduced leach flow and depletion of contaminants. The natural microbiota might be biostimulated by means of applying sustainable and feasible biological treatments in order to favor the OMW sludges bioremediation. These results open up the possibility of solving the environmental concern caused by its storage in similar scenarios, which are common in olive oil-producing countries.

Industrial composting of low carbon/nitrogen ratio mixtures of agri-food waste and impact on compost quality

The agri-food waste (AW) require amendments for composting to adjust nutritional and physicochemical deficiencies. The theoretical mixtures formulation is difficult to reach on an industrial scale. The main objective of this work was to evaluate to what extent the composition of AW-based mixtures determines the quality of the final compost produced at the industrial scale. Raw materials having the same AW share characteristics, irrespectively of the amendments added, but their compost were different. All the materials were biological stable at the cooling phase, and mature enough at the end, although the degree of humification did not match with the absence of phytotoxicity. The final compost had sufficient quality even though the AW-based raw materials have a low C/N ratio (<20) and other characteristics such as high electrical conductivity (13 mS·cm^-1) and pH (<8.5) that are unfavorable for composting. The management operations during industrial composting correct the deficiencies of raw materials.

Evaluating Earthworms’ Potential for Remediating Soils Contaminated with Olive Mill Waste Sediments

The olive-oil industry generates large amounts of residues that, in the past, were accumulated in evaporating ponds in many Mediterranean countries. Currently, these open-air ponds pose a serious environmental hazard because of toxic chemicals that concentrate in their sediments. Bioremediation of olive mill waste (OMW) sediments has emerged as a viable option for managing this environmentally problematic residue. Here, we postulate that inoculation of an OMW-soil mixture with earthworms may be a complementary bioremediation strategy to that using native microorganisms only. A laboratory study assessed the ecotoxicity of OMW-amended soils (10%, 20%, 40% and 80% w/w) combining earthworm biomarker responses and soil enzyme activities. The doses of 40% and 80% were toxic to earthworms, as evidenced by the high mortality rate, loss of body weight and signs of oxidative stress after 30 d of soil incubation. Conversely, doses ≤ 20% w/w were compatible with earthworm activity, as indicated by the significant increase of soil enzyme activities. Total concentrations of phenolic compounds decreased by more than 70% respect to initial concentrations in 10% and 20% OMW treatments. These results suggest that OMW sediments intentionally mixed with soils in an up to 20% proportion is a workable bioremediation strategy, where earthworms can be inoculated to facilitate the OMW degradation.