Development and evaluation of a protease inhibitor antiretroviral drug-loaded carbon nanotube delivery system for enhanced efficacy in HIV treatment

The primary objective of this study was to enhance the effectiveness of the protease inhibitor antiretroviral drug by designing a novel delivery system using carboxylated multiwalled carbon nanotubes (COOH-MWCNTs). To achieve this, Fosamprenavir calcium (FPV), a prodrug of amprenavir known for inhibiting the proteolytic cleavage of immature virions, was selected as the protease inhibitor antiretroviral drug, and loaded onto COOH-MWCNTs using a direct loading method. The structural specificity of the drug-loaded MWCNTs, the percent entrapment efficiency, and in vitro drug release were rigorously evaluated for the developed formulation, referred to as FPV-MWCNT. Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and atomic force microscopy (AFM) techniques were employed to confirm the structural integrity and specificity of the FPV-MWCNT formulation. The results demonstrated a remarkable entrapment efficiency of 79.57 ± 0.4 %, indicating the successful loading of FPV onto COOH-MWCNTs. FE-SEM and AFM analyses further confirmed the well-dispersed and elongated structure of the FPV-MWCNT formulation, without any signs of fracture, ensuring the stability and integrity of the drug delivery system. Moreover, particle size analysis revealed an average size of 290.1 nm, firmly establishing the nanoscale range of the formulation, with a zeta potential of 0.230 mV, signifying the system's colloidal stability. In vitro drug release studies conducted in methanolic phosphate buffer saline (PBS) at pH 7.4 and methanolic acetate buffer at pH 5 demonstrated sustained drug release from the FPV-MWCNT formulation. Over a period of 96 h, the formulation exhibited a cumulative drug release of 91.43 ± 2.3 %, showcasing the controlled and sustained release profile. Furthermore, hemolysis studies indicated a notable reduction in the toxicity of both FPV and MWCNT upon conjugation, although the percent hemolysis increased with higher concentrations, suggesting the need for careful consideration of dosage levels. In conclusion, the findings from this study underscore the potential of the FPV-MWCNT formulation as an effective and promising drug-conjugated system for delivering antiretroviral drugs. The successful encapsulation, sustained drug release, and reduced toxicity make FPV-MWCNT a compelling candidate for enhancing the therapeutic efficacy of protease inhibitor antiretroviral drugs in the treatment of HIV. The developed delivery system holds great promise for future advancements in HIV treatment and paves the way for further research and development in the field of drug delivery utilizing carbon nanotube-based systems.

Biotransformation of Raw Mango Seed Waste into Bacterial Hydrolytic Enzymes Enhancement Via Solid State Fermentation Strategy

Solid waste generation is a huge contributor to environmental pollution issues, and food wastes are prominent in this category due to their large generation on a day-to-day basis. Thus, the settlement of daily food waste is one of the major constraints and needs innovative manufacturing sheme to valorize solid waste in sustainable manner. Moreover, these food wastes are rich in organic content, which has promising scope for their value-added products. In the present study, raw mango seed waste has been biotransformed to produce bacterial hydrolytic enzymes as feedstock. On investigating the impact of substrate, the highest bacterial cellulase production was recorded to be 18 IU/gds FP (filter paper) in 24 h of microbial incubation at 5 g of substrate in solid-state fermentation (SSF). Furthermore, at 40 °C and pH 6.0, 23 IU/gds FP enzyme could be produced in 24 h of SSF. Beside this, on comparing the influence of inorganic and organic nitrogen sources, urea has been found to provide better cellulase production, which yielded 28 IU/gds FP in 24 h of incubation, along with 77 IU/gds BG (β-glucosidase) and 89 IU/gds EG (endoglucanase). On the other hand, Tween-40 and Tween-80, two different surfactants, were employed at a 1.0% concentration for 24 h of incubation. It was noticed that Tween-80 showed complete enzyme activity at 24 h, which was found to be relatively superior to that of Tween-40. This study may have potential utility in enzyme production using mango seed as a food waste for various industrial applications.

Bionanofabrication of Cupric oxide catalyst from Water hyacinth based carbohydrate and its impact on cellulose deconstructing enzymes production under solid state fermentation

One of the most important properties of cellulolytic enzyme is its ability to convert cellulosic polymer into monomeric fermentable sugars which are carbohydrate by nature can efficiently convert into biofuels. However, higher production costs of these enzymes with moderate activity-based stability are the main obstacles to making cellulase-based applications sustainably viable, and this has necessitated rigorous research for the economical availability of this process. Using water hyacinth (WH) waste leaves as the substrate for cellulase production under solid state fermentation (SSF) while treating the fermentation production medium with CuO (cupric oxide oxide) bionanocatalyst have been examined as ways to make fungal cellulase production economically feasible. Herein, a sustainable green synthesis of CuO bionanocatalyst has been performed by using waste leaves of WH. Through XRD, FT-IR, SEM, and TEM analysis, the prepared CuO bionanocatalyst's physicochemical properties have been evaluated. Furthermore, the effect of CuO bionanocatalyst on the temperature stability of raw cellulases was observed, and its half-life stability was found to be up to 9 h at 65 °C. The results presented in the current investigation may have broad scope for mass trials for various industrial applications, such as cellulosic biomass conversion.

Production of fermentable glucose from bioconversion of cellulose using efficient microbial cellulases produced from water hyacinth waste

The economic production of cellulase enzymes for various industrial applications is one of the major research areas. A number of broad industrial applications, for example, in cellulosic biomass hydrolysis for simple sugars such as glucose and subsequent biofuel production, make these enzyme systems the third most demanding enzymes. Nevertheless, due to their production on commercial substrates, cellulases fall into the category of costly enzymes. Therefore, the goal of the present work is to evaluate the enhancement of cellulase production and its utilization in the enzymatic hydrolysis of biomass using low-cost cellulosic substrate, which is abundant and widely available. In this context, waste biomasses of water hyacinth (WH), including leaves and stems, have been used as feedstock to produce cellulases via solid-state fermentation (SSF) in the current study, which improves its production as well as activity. Furthermore, the impact of process parameters like temperature and pH has been investigated for improved cellulase production. At optimum concentration using 10 g of feedstock, 22 IU/gds of FP, 92 IU/gds of BGL, and 111 IU/gds of EG have been noticed in day 5 of SSF. Herein, 40 °C has been identified as the optimum temperature for cellulase production, whereas 50-55 °C has been recorded as the optimum reaction temperature for cellulase enzyme activity. Additionally, pH 5.5 has been identified as the optimum pH for cellulase enzyme production, whereas this enzyme was thermally stable (55 °C) at pH 5.0 up to 3.5 h. Further, the cellulosic biomass hydrolysis of WH leaves via an optimized crude enzyme has been performed, and this could release 24.34 g/L of glucose in 24 h of the reaction. The current findings may have potential for developing cellulases for mass-scale production using WH-based waste bioresources for numerous biorefinery applications.

Date seed waste derived nanocatalyst and its application in production of hydrolytic enzyme, fermentative sugars and biohydrogen

Biofuel production from cellulosic biomass is a promising approach; however, the cost-intensive utilization of cellulolytic enzymes is a major roadblock to economic production. This study reports the preparation of a nanocatalyst using date seed and evaluates the impact of nanocatalysts on cellulolytic enzyme production using solid-state fermentation of date pulp waste through bacterial co-cultivation. Under optimized conditions, 30 IU/gds filter paper activity is produced in the presence of 2 mg of nanocatalyst. Cellulase showed thermal stability at 50 °C and pH 7 up to 10 h in the presence of nanocatalyst, and it produced 32.31 g/L glucose through the hydrolysis of acidic-pretreated date seeds in 24 h. Subsequently, 1788 mL/L of cumulative H2 in 24 h through cocultured dark fermentation could be produced. The approach presented in this study can be effective for multiple value additions, including nanocatalyst preparation, cellulase enzyme, and biohydrogen production.

Recent advances in microbial engineering approaches for wastewater treatment: a review

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Facile pretreatment strategies to biotransform Kans grass into nanocatalyst, cellulolytic enzymes, and fermentable sugars towards sustainable biorefinery applications

The present investigation is targeted towards the facile fabrication of a carbon-based nanocatalyst (CNCs) using Kans grass biomass (KGB) and its sustainable application in microbial cellulase enhancement for the alleviation of enzymatic hydrolysis for sugar production. Different pretreatments, including physical, KGB extract-mediated treatment, followed by KOH pretreatment, have been applied to produce CNCs using KGB. The presence of CNCs influences the pretreatment of KGB substrate, fungal cellulase production, stability, and sugar recovery in the enzymatic hydrolysis of KGB. Using 1.0% CNCs pretreated KGB-based solid-state fermentation, 33 U/gds FPA and 126 U/gds BGL were obtained at 72 h, followed by 107 U/gds EG at 48 h in the presence of 0.5% CNCs. Further, 42 °C has been identified as the optimum temperature for cellulase production, while the enzyme showed thermal stability at 50 °C up to 20 h and produced 38.4 g/L sugar in 24 h through enzymatic hydrolysis of KGB.

Enhancement in Bacterial Cellulolytic Enzyme Production Using Acid-Pretreated Banana Peel Waste: A Comparative Evaluation

Banana peel waste is one of the major contributors in the issue raised from solid waste, however, it can be valorized effectively due to high content of cellulose and hemicellulose. Significant conversion of banana waste includes cellulolytic enzymes and bioenergy production. In the present study, bacterial cellulase was produced using raw banana peel and ripe banana peel under SSF. Additionally, impact of acid pretreatment was investigated as one of strategy to improve cellulolytic enzyme production. A comparative evaluation of raw and ripe banana peels showed that ripe banana peels showed better enzyme production after pretreatment with 0.5% dilute HCl acid. In the series of enhancement of the enzyme production, temperature and pH of the SSF medium were also investigated, and found temperature 35 °C and pH 6.0 were optimum to produce maximum 3.5-U/ml FPA, 39-U/ml BGL, and 54-U/ml EG in 18-h SSF incubation. The study presented eco-friendly waste management to produce industrial enzyme for its promising application in waste valorization and biorefinery area.

COVID Variants, Villain and Victory: A Bioinformatics Perspective

The SARS-CoV-2 virus, a novel member of the Coronaviridae family, is responsible for the viral infection known as Coronavirus Disease 2019 (COVID-19). In response to the urgent and critical need for rapid detection, diagnosis, analysis, interpretation, and treatment of COVID-19, a wide variety of bioinformatics tools have been developed. Given the virulence of SARS-CoV-2, it is crucial to explore the pathophysiology of the virus. We intend to examine how bioinformatics, in conjunction with next-generation sequencing techniques, can be leveraged to improve current diagnostic tools and streamline vaccine development for emerging SARS-CoV-2 variants. We also emphasize how bioinformatics, in general, can contribute to critical areas of biomedicine, including clinical diagnostics, SARS-CoV-2 genomic surveillance and its evolution, identification of potential drug targets, and development of therapeutic strategies. Currently, state-of-the-art bioinformatics tools have helped overcome technical obstacles with respect to genomic surveillance and have assisted in rapid detection, diagnosis, and delivering precise treatment to individuals on time.

Production Enhancement of Bacterial Cellulase Cocktail Using Potato Peels Waste Feedstock and Combination of Water Hyacinth Root and Pea Pod Extract as Natural Nutrient Media: Application in Bioconversion of Potato Peels

Solid wastes are the major contributors in global environmental pollution and their management is the need of urgency towards development of sustainable world. In the present work, solid waste of potato peels has been used as feedstock for fermentation of bacterial cellulase production and substrate for enzymatic hydrolysis via this enzymes cocktail. Additionally, liquid extracts of pea pod and root of water hyacinth wastes have been used to complete nutritional requirements and moisture balance in SSF process during the course of enzyme production. At optimum feedstock concentration of 6.0 g PPW and 10:40 extract-based moisture ratio of WHR and Ppw, Bacillus sp. produced 15 U/gds FP in 18 h, whereas maximum 36 U/gds BGL and 42 U/gds EG have been recorded in 24 h of SSF. Temperature 35 °C and pH 5.5 were optimum for enzyme production while the produced enzyme was thermally stable upto 30 h at 35 °C with 100% pH stability upto 14 h and 77% relative activity at 34 h. The optimized bacterial enzymes have been used for bioconversion of PPW biomass and 26 g/L glucose has been recorded at a hydrolytic temperature of 50 °C and pH 5.0. The study may have feasible promising scope in cellulosic biorefineries and waste management.

Rice straw derived graphene-silica based nanocomposite and its application in improved co-fermentative microbial enzyme production and functional stability

Cellulases are the one of the most highly demanded industrial biocatalysts due to their versatile applications, such as in the biorefinery industry. However, relatively poor efficiency and high production costs are included as the key industrial constraints that hinder enzyme production and utilization at economic scale. Furthermore, the production and functional efficiency of the β-glucosidase (BGL) enzyme is usually found to be relatively low among the cellulase cocktail produced. Thus, the current study focuses on fungi-mediated improvement of BGL enzyme in the presence of a rice straw-derived graphene-silica-based nanocomposite (GSNCs), which has been characterized using various techniques to analyze its physicochemical properties. Under optimized conditions of solid-state fermentation (SSF), co-fermentation using co-cultured cellulolytic enzyme has been done, and maximum enzyme production of 42 IU/gds FP, 142 IU/gds BGL, and 103 IU/gds EG have been achieved at a 5 mg concentration of GSNCs. Moreover, at a 2.5 mg concentration of nanocatalyst, the BGL enzyme showed its thermal stability at 60°C and 70 °C by holding its half-life relative activity for 7 h, while the same enzyme demonstrated pH stability at pH 8.0 and 9.0 for the 10 h. This thermoalkali BGL enzyme might be useful for the long-term bioconversion of cellulosic biomass into sugar.

Dealing with infodemic during COVID-19 pandemic: Role of effective health communication in facilitating outbreak response & actions - An ICMR experience

Objectives

To highlight and assess the impact of intervention tools used by Indian Council of Medical Research (ICMR) against COVID19 associated infodemic in the world's largest democratic country, India.

Study design

It is a retrospective cross sectional study. The impact of ICMR's multi-pronged strategy to address the infodemic during pandemic has been assessed through analysis of print media reportage and social media engagements.

Methods

The impact of the interventions was assessed using cloud media mappers like MediaCloud and Meltwater using keywords. The data was analysed in terms of reportage, theme of reportage. A sub-section of media reportage (Feb 2020-June 2020) was analysed in details from 4 major dailies to understand the coverage and tonality of media reports. The data on COVID 19 related tweets, posts and uploads were taken from social media platforms of Indian Council of Medical Research (ICMR) particularly twitter, instagram, facebook and youtube and estimate of pre and post pandemic changes in followers or users were collected for analysis. The data was curated and analysed using MS excel.

Results

There was a surge of 3800% reportage in media during pandemic as compared to same time frame in pre-pandemic times. A surge of followers on twitter from 26,823 on Feb 2020 (before pandemic) to 3,36,098 at March 2022 (after pandemic) was observed. A drastic increase in monthly followers was observed after start of Pandemic (after Feb 2020) in comparison to before pandemic (Before Feb 2020). Similar trends were observed on other social media platforms of ICMR.

Conclusions

The Communications Unit at ICMR geared up with more robust plans and designed several interventions to mitigate the infodemic which helped in evidence based decision making towards outbreak response and action. This highlights the importance of evidence based, crisp, timely and effective communication during the epidemics/pandemics to buid trust and confidence in the community.

Association between serum interleukin-6, leptin and insulin in gestational diabetes mellitus - a cross- sectional study

Purpose

Gestational diabetes mellitus (GDM) is a state of leptin resistance which develops a vicious cycle of hyperinsulinemia and hyperleptinemia leading to aggravation of an inflammatory situation. This study was done to find out the association between IL-6, leptin and insulin in gestational diabetes among North Indian women.

Method

This cross-sectional study included 100 GDM, 100 non-GDM and 50 non-pregnant women. DIPSI (Diabetes in Pregnancy Study Group India) criteria was used for screening GDM among pregnant women. GDM and non-GDM pregnant women were further categorized into three groups according to the trimester of pregnancy. Serum IL-6, leptin and insulin were measured in all the enrolled women.

Results

Serum IL-6 levels were significantly higher among GDM women as compared to non-GDM and non-pregnant women. Although the mean serum leptin and insulin levels were higher in GDM, but the difference was not statistically significant. When GDM and non-GDM women were categorized into three trimester, serum leptin levels were found to be significantly higher in 3rd trimester (p < 0.002) and IL-6 in 1st trimester (p < 0.017) among GDM women. No correlation was found between serum IL-6, leptin and insulin in GDM.

Conclusion

Absence of any significant association between leptin and IL-6 signifies that leptin may not be associated with inflammation in gestational diabetes. However, IL-6 may serve as an early marker for screening glucose intolerance during pregnancy.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40200-023-01188-3.

Biologically derived copper oxide-based nanocatalyst using Moringa oleifera leaves and its applications in hydrolytic enzymes and biohydrogen production

Due to the limited availability of fossil fuels, pollution causing serious environmental issues, and their continuously rising price, the development of low-cost efficient enzymes and their implementation in biomass-based bioenergy industries are highly demanded. In the present work, phytogenic fabrication of copper oxide based nanocatalyst has been performed using moringa leaves and has been characterized using different techniques. Herein, the impact of different dosages of as-prepared nanocatalyst on fungal co-cultured cellulolytic enzyme production under co-substrate fermentation using wheat straw and sugarcane bagasse in 4:2 ratios in solid state fermentation (SSF) has been investigated. An optimal concentration of 25 ppm of nanocatalyst influenced the production of 32 IU/gds of enzyme, which showed thermal stability at 70 °C for 15 h. Additionally, enzymatic bioconversion of rice husk at 70 °C librated 41 g/L of total reducing sugars, which led to the production of 2390 mL/L of cumulative H₂ in 120 h.

Protein-protein networks analysis of differentially expressed genes unveils the key phenomenon of biological process with respect to reproduction in endangered catfish, C. Magur

Clarias magur (magur) is an important freshwater catfish with high potential in the aquaculture sector in its geographical ranges of distribution. One of the impediments to realise its full aquaculture potential is the lack of understanding key genes involved in its reproduction pathways. Nonetheless, very limited information is available on brain and gonads, with respect to reproduction related issues of magur at molecular level. The present study was aimed at understanding the interaction of the brain-gonad system by analysing differentially expressed genes (DEG) in brains and gonads of male and female magur using a protein-protein network interaction study. In brief, 641, 541, 225 and 245 DEGs, respectively, in ovary, testis and female brain and male-brain of magur were used as input in String database 11.0 and Cytoscape v 3.8.0 plug-in Network Analyzer for PPI network construction followed by network superimposition, network merging and analysis. A total of 13 key genes in female brain & ovary and 12 key genes in male brain & testis were obtained based on the network topological parameter betweenness centrality and nodes degree. Among them, cyp19a1b and amh genes in male brain-testis and Tp53 and exo1 genes in female brain-ovary were identified as hub genes having a high level of interaction and expression with other key genes in the network. Further, functional annotation study of these genes revealed their active involvement in important pathways related to reproduction. This is the first report exploring the interaction of brain and gonads in the regulation of magur reproduction through a protein-protein interaction network. The 25 key genes identified in the combined network are involved in various pathways, like neuropeptide signalling pathway, oxytocin receptor-mediated signalling pathway, corticotrophin-releasing factor receptor signalling pathway and reproduction process, which could lead to a better understanding of the magur reproductive system.

Microbial cellulase production and stability investigations via graphene like carbon nanostructure derived from paddy straw

Cellulases are among the most in-demand bioprocess enzymes, and the high cost of production, combined with their low enzymatic activity, is the main constraint, particularly in the biofuels industry. As a result, low-cost enzyme production modes with high activity and stability have emerged as the primary focus of research. Here, a method for producing a graphene like carbon nanostructure (GLCNs) has been investigated utilizing paddy straw (Ps), and its physicochemical characteristics have been examined using a variety of techniques including XRD, FT-IR, SEM and TEM. Further, the pretreatment of Ps feedstock for cellulase production was done using diluted waste KOH liquid collected during the preparation of the GLCNs. To increase the production and stability of the enzyme, newly prepared GLCNs is utilized as a nanocatalyst. Using 15 mg of GLCNs, 35 IU/gds FP activity was seen after 72 h, followed by 158 IU/gds EG and 114 IU/gds BGL activity in 96 h. This nanocatalyst supported enzyme was thermally stable at 70 °C up to 15 h and exhibited stability at pH 7.0 for 10 h by holding 66 % of its half-life.

Impact of nanomaterials on sustainable pretreatment of lignocellulosic biomass for biofuels production: An advanced approach

Biomass to biofuels production technology appears to be one of the most sustainable strategies among various renewable energy resources. Herein, pretreatment is an unavoidable and key step to increase free cellulose availability and digestibility to produce green fuels. Various existing pretreatment technologies of lignocellulosics biomasses (LCBs) face distinct challenges e.g., energy consuming, cost intensive, may lead partial removal of lignin, complex inhibitors production as well as may cause environmental pollutions. These, limitations may be overcome with the application of nanomaterials, employed as nanocatalysts during the pretreatment process of LCBs. In this prospect, the present review focuses and summarizes results of numerous studies and exploring the utilizations of magnetic, carbon based nanostructure, and nanophotocatalysts mediated pretreatment processes along with their possible mechanisms to improve the biofuels production compared to conventional chemical based pretreatment approaches. Furthermore, different aspects of nanomaterials based pretreatment methods with their shortcomings and future prospects have been discussed.

Sustainable valorization of water hyacinth waste pollutant via pyrolysis for advance microbial fuel investigation

Present study has been focused on the bio-energy potential of waste biomass (water hyacinth leaves and its stem). Pyrolysis of both biomasses were investigated at five different heating rates (5-25 ^°C/min) using thermogravimetric analyzer. For both biomasses, maximum thermal degradation occurred within the temperature range of 200-400 °C, which is the active pyrolytic zone. Three non-iso-conversional (degradation models) including the Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa, and Starink were used to calculate the activation energy of both biomasses. The activation energy was around 92-98 kJ/mol for water hyacinth leaves and 151-153 kJ/mol for water hyacinth stems. The results suggest that these low-cost abundantly available biomasses have a good potential for the production of solid bio-fuel.

Enhancement in functional stability of microbial endoglanases produced using paddy straw via treatment with manganese oxide based porous nanocomposite synthesized from mixed fruit waste

Microbial cellulases are the enzymes used in numerous industrial biotechnological applications. Efficiency of celluloytic cocktails plays a key role in the conversion of biomass into biofuels, but limited production, high cost and low efficiency are the main obstacles to sustainable biorefining. The current work aims to establish a feasible approach for boosting the production of fungal endoglucanse (EG) and its functional stability utilizing nanocomposite materials based on manganese oxide. Herein, aqueous extract from mixed fruit waste was used to synthesize the nanocomposite sample, which was subsequently subjected to several characterization techniques for analysis. Following the solid-state fermentation of paddy straw, and by employing 75 mg nanocomposite, 192 IU/gds EG was produced under the optimal conditions, while 19 IU/gds FP and 98 IU/gds BGL production were recorded. The crude EG enzyme treated with nanocomposite also shows complete stability at pH 5.0 for 3.5 h while retaining thermal activity at 70 °C for 4 h.

Towards enhancement of fungal hydrolytic enzyme cocktail using waste algal biomass of Oscillatoria obscura and enzyme stability investigation under the influence of iron oxide nanoparticles

Development of low-cost and economic cellulase production is among the key challenges due to its broad industrial applications. One of the main topics of research pertaining to sustainable biomass waste based biorefinaries is the development of economic cellulase production strategies. The main cause of the increase in cellulase production costs is the use of commercial substrates; as a result, the cost of any cellulase-based bioprocess can be decreased by employing a productive, low-cost substrate. The goal of the current study is to develop low-cost cellulase using the carbohydrate-rich, renewable, and widely accessible cyanobacteria algae Oscillatoria obscura as the production substrate. Maximum cellulase was produced utilising the fungus Rhizopus oryzae at substrate concentration of 7.0 g among various tested concentrations of algal biomass. Maximum production rates of 22 IU/gds FP, 105 IU/gds BGL, and 116 IU/gds EG in 72 h were possible under optimal conditions and substrate concentration. Further investigations on the crude enzyme's stability in the presence of iron oxide nanoparticles (IONPs) revealed that it was thermally stable at 60 °C for up to 8 h. Additionally, the crude enzyme demonstrated pH stability by maintaining its complete activity at pH 6.0 for 8 h in the presence of the optimal dose of 15 mg IONPs. The outcomes of this research may be used to investigate the possibility of producing such enzymes in large quantities at low cost for industrial use.

Co-circulation of all the four Dengue virus serotypes during 2018-2019: first report from Eastern Uttar Pradesh, India

Dengue fever is an endemic disease in India, transmitted by an infected mosquito bite. In India, the number of concurrent infections and the circulation of multiple dengue virus (DENV) serotypes has increased in recent decades. Molecular surveillance among the DENV serotype is important to keep track of the circulating serotypes, evolutionary changes, and key mutations that can alter the diagnostics. The current study included patients admitted for dengue in the Eastern Uttar Pradesh (E-UP) region during 2018-2019. The genetic characterization of the circulating DENV was accomplished through partial CprM (511 bp) gene amplification via reverse transcriptase polymerase chain reaction and sequencing. Phylogenetic analysis revealed the circulation of all four DENV1-4 serotypes. DENV-2 was the most abundant serotype (44%, 27/61), followed by DENV-3 (32%, 20/61). DENV-1 had a 16% (10/61) predominance, while DENV-4 (6%, 4/61) was found to be the least abundant serotype. DENV-2 genotypes were distributed among lineages I (7.4%), II (85%) and III (7.4%) of genotype IV, DENV-3 to lineage III of genotype III, DENV-1 to genotype III; DENV-2 to lineage B (75%) and C (25%) of genotype I. This primary report on the co-circulation of DENV1-4 serotypes from the E-UP region highlights the requirement of continuous molecular surveillance for monitoring circulating DENV serotypes.

Carbon Nanotubes in Breast Cancer Treatment: An Insight into Properties, Functionalization, and Toxicity

Breast cancer is the most common cancer among women worldwide. It is the main reason why women die from cancer. Early diagnosis due to increased public awareness and better screening helps to tackle the disease through surgical resection and curative therapies. Chemotherapies are frequently used for cancer treatment, but these have severe adverse effects due to a lack of target specificity. Formulation development scientists and clinicians are now particularly concerned with developing safe and efficient drug delivery systems for breast cancer treatment. Potentially relevant literature to get the latest developments and updated information related to properties, functionalization, toxicity and application of carbon nanotubes in breast cancer treatment has been obtained from Web of Science, Scopus, and PubMed portals. Nanomedicine has emerged as a novel tool for target-specific delivery systems and other biomedical applications. Carbon nanotubes (CNTs) are gaining popularity due to their unique mechanical and physiochemical properties for the diagnosis and treatment of cancer. It is a promising carrier that can deliver micro and macromolecules to the cancer cell. CNTs can be functionalized at the surface with different functional groups, which helps in targeting the drugs to target cancer cells. The present review has elaborated on different functionalization approaches and toxicity aspects of CNTs.

Kinetics investigation of phenolic pollutant degradation via Serratia marcescens ABHI 001 and its application in wastewater treatment

In the present work, kinetic study has been conducted in order to effectively eliminate the p-cresol from wastewater employing isolated bacterial strain Serratia marcescens ABHI001 under batch shake flasks in the concentration varying from 50 to 500 mg/L. Further, effects of various parameters including p-cresol concentration, inoculum dosage, temperature, pH and agitation have been investigated. It was found that 10% v/v inoculum of 24 h age, was effective in degrading p-cresol. Beside this, it was noticed that the concentration of P-cresol above 100 mg/L exhibited an inhibitory effect. The maximum specific growth rate (μmax) was obtained to be 0.360 h-1 for 100 mgL-1 concentration. Further, the experimental results were well fitted with Halden's and Andrew's models and kinetic parameters μmax, KS and Ki in case of Haldane model were calculated to be 0.9697 h-1, 88.07 mgL-1 and 219.9 mgL-1, respectively whereas the corresponding values in case of Andrews's constants were 0.6917 h-1, 62.83 mgL-1 and 307.4 mgL-1, respectively. The yield coefficient for the growth on p-cresol was found to be 0.82.

Recent Update on anaerobic digestion of paddy straw for biogas production: Advancement, limitation and recommendations

At present, development and production of advanced green energy sources are highly demanded, and this may offer a clean and sustainable environment to our modern society. In this reference, biogas is emerging as a promising green energy source and seems to have high potential to replace fossil-fuel based energy sources in the coming future. Further, lignocellulosic biomass (LCB) based biogas production technology has been found to be highly promising owing to several advantages associated therewith. Rich inorganic content, renewable nature, huge availability and low-cost are the key beneficial factors of LCB-based feedstock l to produce biogas. Among the varieties of LCB, paddy straw is one of the most demanding feedstocks and is highly rich in organic compounds that are imperative to producing biogas. Nevertheless, it is noticed that paddy straw as a waste material is usually disposed-off by direct burning, whereas it exhibits low natural digestibility due to the presence of high lignin and silica content which causes severe environmental pollution. On the other hand, paddy straw can be a potential feedstock to produce biogas through anaerobic digestion. Therefore, based on the current ongoing research studies worldwide, this review evaluates the advancements made in the AD process. Meanwhile, existing limitations and future recommendations to improve the yield and productivity of the biogas using paddy straw have been discussed. The emphasis has also been given to various operational parameters developments, related shortcomings, and strategies to improve biogas production at pilot scale.

Effect of endogenous hormones, antisperm antibody and oxidative stress on semen quality of crossbred bulls

The present study was designed to evaluate the effect of factors like hormones, antisperm antibody (ASA), and oxidative stress and its relation with semen quality in crossbred bulls. Ejaculates from two bulls were categorized into good (n = 12) and poor (n = 12) based on initial progressive motility, that is, ≥70% and ≤50%, respectively. The level of hormones like Testosterone (p < 0.05) and PGE₂ (p < 0.01) was significantly higher in good-quality ejaculates compared to poor-quality ejaculates; however, estradiol (p < 0.05), progesterone, oxidative stress, and ASAs were significantly higher (p < 0.01) in poor-quality ejaculates compared to good-quality ejaculates. Therefore, it could be concluded that oxidative stress and hormonal imbalance might have resulted in high number of dead and defective spermatozoa which was ultimately responsible for poor quality semen ejaculates.

Molecular docking approaches and its significance in assessing the antioxidant properties in different compounds

In the last few years, the significance of antioxidant compounds and their properties has attracted great interest from the scientific community. The role of an antioxidant in managing & regulating oxidative stress and also in the protection of the human body from severe adverse effects due to excess release of free radicles or reactive oxygen species (ROS) is remarkable. From aiding protection & combating severe illnesses such as cancer, neurodegeneration, aging, and diabetes to being a vital part of the treatment of SARs-CoV-19 is of great importance. Therefore, the study of anti-oxidants is of great importance in human sustenance. Additionally, molecular docking techniques and their various mathematical features help in understanding the molecular interactions of anti-oxidants based on their lowest binding energy. The evaluation of the binding score between two constituent molecules will provide insight as to the binding process and also suggest possible novel therapeutic targets for the treatment of diseases. In this chapter, we will discuss the significance of molecular docking techniques in the study of antioxidant compounds.

Advancement in magnetic hyperthermia-based targeted therapy for cancer treatment

Magnetic hyperthermia utilizing magnetic nanoparticles (MNPs) and an alternating magnetic field (AMF) represents a promising approach in the field of cancer treatment. Active targeting has emerged as a valuable strategy to enhance the effectiveness and specificity of drug delivery. Active targeting utilizes specific biomarkers that are predominantly found in abundance on cancer cells while being minimally expressed on healthy cells. Current comprehensive review provides an overview of several cancer-specific biomarkers, including human epidermal growth factor, transferrin, folate, luteinizing hormone-releasing hormone, integrin, cluster of differentiation (CD) receptors such as CD90, CD95, CD133, CD20, and CD44 also CXCR4 and vascular endothelial growth factor, these biomarkers bind to ligands present on the surface of MNPs, enabling precise targeting. Additionally, this review touches various combination therapies employed to combat cancer. Magnetic hyperthermia synergistically enhances the efficacy of conventional cancer treatments such as targeted chemotherapy, radiation therapy, gene therapy, and immunotherapy.

Thermophilic biohydrogen production strategy using agro industrial wastes: Current update, challenges, and sustainable solutions

Continuously increasing wastes management issues and the high demand of fuels to fulfill the current societal requirements is not satisfactory. In addition, severe environmental pollution caused by generated wastes and the massive consumption of fossil fuels are the main causes of global warming. In this scenario, production of hydrogen from organic wastes is a potential and one of the most feasible alternatives to resolve these issues. However, sensitivity of H₂ production at higher temperature and lack of potential substrates are the main issues which are strongly associated with such kinds of biofuels. Therefore, the present review is targeted towards the evaluation and enhancement of thermophilic biohydrogen production using organic, cellulosic wastes as promising bioresources. This review discusses about the current status, development in the area of thermophilic biohydrogen production wherein organic wastes as key substrate are being employed. The combinations of suitable organic and cellulose rich substrates, thermo-tolerant microbes, high enzymes stability may support to enhance the biohydrogen production, significantly. Further, various factors which may significantly contribute to enhance biohydrogen production have been discussed thoroughly in reference to the thermophilic biohydrogen production technology. Additionally, existing obstacles such as unfavorable thermophilic biohydrogen pathways, inefficiency of thermophilic microbiomes, genetic modifications, enzymes stability have been discussed in context to the possible limitations of thermophilic biohydrogen production strategy. Structural and functional microbiome analysis, fermentation pathway modifications via genetic engineering and the application of nanotechnology to enhance the thermophilic biohydrogen production have been discussed as the future prospective.

Biomass valorization of Eichhornia crassipes root using thermogravimetric analysis

Present study focused on the thermo-chemical potential of waste biomass of Eichhornia crassipes or water hyacinth root (WHR). The pyrolysis-kinetic parameters are investigated using thermo-gravimetric analysis at the various heating rates (5, 10, 15, and 20 °C/min). Three model-free techniques, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, were used for the thermal kinetic analysis of biomass. The average activation energy for WHR biomass was determined using KAS, FWO, and Starink, with the values of 57.87, 64.69, and 58.27 kJ/mol, respectively. From the study it is observed that the roots of water hyacinth have rich in carbon, oxygen and hydrogen composition around 24%, 70% and 4% respectively. The higher heating value of water hyacinth root was observed around 15 MJ/kg.

Extent of disability among paediatric Japanese encephalitis survivors and predictors of poor outcome: a retrospective cohort study in North India

OBJECTIVE

To determine the Japanese encephalitis (JE)-associated long-term functional and neurological outcomes, the extent of reduced social participation and predictors of poor outcomes among paediatric JE survivors.

DESIGN

A retrospective cohort study.

SETTING

Laboratory-confirmed JE-positive paediatric cases (<16 years of age) hospitalised at the paediatric ward of Baba Raghav Das Medical College, Gorakhpur, India, between 1 January 2017 and 31 December 2017, were followed up after 6-12 months of hospital discharge.

PARTICIPANTS

126 patients were included in the study; median age was 7.5 years (range: 1.5-15 years), and 74 (58.73%) were male.

OUTCOME MEASURES

Functional outcome defined by Liverpool Outcome Score (LOS) dichotomised into poor (LOS=1-2) and good (LOS=3-5) outcome groups compared for demographic, clinical and biochemical parameters for prognostic factors of poor outcomes. Social participation of patients scaled on Child and Adolescent Scale of Participation score 2-5.

RESULTS

About 94 of 126 (74.6%) children developed neurological sequelae at different levels of severity. Age-expected social participation was compromised in 90 out of 118 children. In multivariate logistic regression analysis, a combination of parameters, JE unvaccinated status (OR: 61.03, 95% CI (14.10 to 264); p<0.001), low Glasgow Coma Score (GCS) at admission (≤8) (OR: 8.6, 95% CI (1.3 to 57.1); p=0.026), malnutrition (OR: 13.56, 95% CI (2.77 to 66.46); p=0.001) and requirement of endotracheal intubation (OR: 5.43, 95% CI (1.20 to 24.44); p=0.027) statistically significantly predicted the poor outcome with 77.8% sensitivity and 94.6% specificity. The goodness-of-fit test showed that the model fit well (Hosmer-Lemeshow goodness-of-fit test) (χ ²=3.13, p=0.988), and area under the receiver operating characteristic curve was 0.950.

CONCLUSION

This study estimates the burden of JE-presenting post-discharge deaths (15.4%) and disability (63.08%). Those who did not receive JE vaccine, were suffering from malnutrition, had GCS ≤8 at admission and required endotracheal intubation had poorer outcomes.

Green Synthesis of Zn(OH)2/ZnO-Based Bionanocomposite using Pomegranate Peels and Its Application in the Degradation of Bacterial Biofilm

The ability and potency of bacterial species to form biofilms, which show antibiotic resistance thereby avoiding antibiotic surfaces, is a major cause of prolonged infections. Various advanced approaches have been employed to prevent or damage bacterial biofilms, formed by a variety of bacterial strains, to help prevent the associated infectious disease. In this context, zinc-based nanostructures have been recognized as a potential antibiotic agent against a broad spectrum of bacterial communities. As a result, a sustainable and green synthesis method was adapted in the present study to synthesize a Zn(OH)₂/ZnO-based bionanocomposite, in which aqueous extracts of waste pomegranate peels (Punica granatum) were employed as a natural bioreducing agent to prepare the bionanocomposite at room temperature. Furthermore, FT-IR, XRD, DLS, UV-Visible, PL spectroscopy, FE-SEM, and TEM were used to characterize the green route synthesized a Zn(OH)₂/ZnO bionanocomposite. The average crystallite size was determined using the Scherrer relation to be 38 nm, and the DLS results indicated that the Zn(OH)₂/ZnO bionanocomposite had a hydrodynamic size of 170 nm. On the other hand, optical properties investigated through UV-Vis and PL spectroscopy explored the energy bandgap between 2.80 and 4.46 eV, corresponding to the three absorption edges, and it covered the blue spectrum when the sample was excited at 370 nm. Furthermore, the impact of this green route synthesized a Zn(OH)₂/ZnO bionanocomposite on the biofilm degradation efficiency of the pathogenic bacterial strain Bacillus subtilis PF_1 using the Congored method was investigated. The Congored assay clearly explored the biofilm degradation efficiency in the presence of a 50 mg/mL and 75 mg/mL concentration of the Zn(OH)₂/ZnO bionanocomposite against the bacterial strain Bacillus subtilis PF_1 grown for 24 h. This study can be further applied to the preparation of bionanocomposites following a low-cost green synthesis approach, and thus prepared nanostructures can be exploited as advanced antimicrobial agents, which could be of great interest to prevent various infectious diseases.

Improved production of biogas via microbial digestion of pressmud using CuO/Cu2O based nanocatalyst prepared from pressmud and sugarcane bagasse waste

Biogas production through anaerobic digestions of organic wastes using microbes is a potential alternative to maintain the long term sustainability of the environment and also to full-fill the energy demands and waste management issues. In this context, pressmud can be a vital substrate which is generated from sugarcane industries and found to be broadly available. In this work, biogas improvement has been investigated in presence of CuO/Cu₂O based nanocatalyst wherein pressmud is employed as a substrate in anaerobic digestion. Herein, CuO/Cu₂O based nanocatalyst has been prepared using the aqueous extract prepared from the combination of PM and SCB which is employed as a reducing agent. The physicochemical properties of CuO/Cu₂O nanocatalyst have been probed through different techniques and it is noticed that using 1.0 % CuO/Cu₂O based nanocatalyst employed in AD process, cumulative biogas 224.7 mL CH₄ /g VS could be recorded after 42 days.

Prospects of soil microbiome application for lignocellulosic biomass degradation: An overview

Sustainable and practically viable biofuels production technology using lignocellulosic biomass is still seeking its way of implementation owing to some major issues involved therein. Unavailability of efficient microbial sources for the degradation of cellulosic biomass is one of the major roadblocks in biomass to biofuels production technology. In this context, utilization of microbiomes to degrade lignocellulaosic biomass is emerging as a rapid and effective approach that can fulfill the requirements of biomass based biofuels production technology. Therefore, the present review is targeted to explore soil metagenomic approach to improve the lignocellulosic biomass degradation processing for the cost-effective and eco-friendly application. Soil microbiomes consist of rich microbial community along with high probability of cellulolytic microbes, and can be identified by culture independent metagenomics method which can be structurally and functionally explored via genomic library. Therefore, in depth analysis and discussion have also been made via structural & functional metagenomics tools along with their contribution to genomic library. Additionally, the present review highlights currently existing bottlenecks along with their feasible solutions. This review will help to understand the basic research as well as industrial concept for the process improvement based on soil microbiome mediated lignocellulosic biomass degradation, and this may likely to implement for the low-cost commercial biofuels production technology.

Cryoprotection of humanin-like peptides in seminal plasma for ejaculated spermatozoa of crossbred bulls

BACKGROUND

Cryopreservation process negatively affects spermatozoa functions. Humanin, a small polypeptide encoded in the mitochondrial genome, is well known for its role in cell survival.

OBJECTIVE

To quantify the endogenous levels of humanin in seminal plasma of crossbred Frieswal bulls and to study its role in cryoprotection. The presence of humanin in bull spermatozoa was also investigated.

MATERIALS AND METHODS

A total of 40 semen samples were separated into two groups based on the initial progressive motility (IPM): Good (IPM >70%) and Poor (IPM <50%) groups; and/or based on the post-thaw motility (PTM): Freezable (PTM>50%) and Non-freezable (PTM < 50%) groups. Humanin concentration in seminal plasma (SP-HN) was quantified using ELISA.

RESULTS

SP-HN concentration ranged from undetectable to 67.6 pg/mL with a median level of 35.2 pg/mL. SP-HN level was significantly higher in the good quality semen group than in the poor quality semen group (p<0.001), and also significantly higher in the freezable group than in the non-freezable group (p<0.001). SP-HN level was positively correlated with initial progressive motility, post-thaw semen motility, viability, acrosome intactness and plasma membrane integrity, but negatively correlated the level of reactive oxygen species and malondialdehyde content. Immunochemical localization showed the presence of humanin in the proximal region of the middle piece of spermatozoa.

CONCLUSION

Endogenous humanin level had significant correlation with semen quality and might protect sperm cells against freeze-induced oxidative stress. doi.org/10.54680/fr22510110712.

Integrated process approach for degradation of p-cresol pollutant under photocatalytic reactor using activated carbon/TiO2 nanocomposite: application in wastewater treatment

Over the years, biodegradation has been an effective technique for waste water treatment; however, it has its own limitations. In order to achieve a higher degradation efficacy, integrated processes are being focus in this area. Therefore, the present study is targeted towards the coupling of biodegradation and photocatalytic degradation of p-cresol. The biodegradation of p-cresol was performed via lab isolate Serratia marcescens ABHI001. The obtained results confirmed that ~85% degradation of p-cresol was accomplished using Serratia marcescens ABHI001 strain in 18 h. Consequently, degradation of remaining residue (remaining p-cresol concentration initially used) was also examined in a batch reactor using activated carbon-TiO₂ nanocomposite (AC/TiO₂-NC) as a catalyst under the exposure of UV radiation. The AC/TiO₂-NC was processed via sol-gel technique and characterized by various techniques, namely Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transformed infrared spectroscopy (FT-IR). The investigation allowed p-cresol degradation further augment up to ~96% with the help of spectrophotometer trailed by high performance liquid chromatography (HPLC). This study demonstrates that integrated process (biodegradation-photodegradation) is the cost-effective bioremediation process to overcome such kinds of pollutant issues.

Sustainable approaches towards green synthesis of TiO2 nanomaterials and their applications in photo-catalysis mediated sensingtomonitor environmental pollutions

Nanomaterials are gaining enormous interests owing to their novel applications that have been explored nearly in every field of our contemporary society. In this scenario, preparations of nanomaterials following green routes have attracted widespread attention in terms of sustainable, reliable and environmentally friendly practice to produce diverse nanostructures. In this review, we summarized the fundamental processes and mechanisms of green synthesis approaches of TiO₂ NPs. We explore the role of plants and microbes as natural bioresources to prepare TiO₂ NPs. Particularly, focused have been made to explore the potential of TiO₂ based nanomaterials to design variety of sensing platforms by exploiting the photo-catalysis efficiency under the influence of light source. Such types of sensing can of massive importance to monitor the environmental pollutions and thereby to invent advanced strategies to remediate hazardous pollutants to offer clean environment.

Improved biohydrogen production via graphene oxide supported granular system based on algal hydrolyzate, secondary sewage sludge and bacterial consortia

Biohydrogen production using renewable sources has been regarded as one of the most sustainable ways to develop low-cost and green production technology. In order to achieve this objective, herein biohydrogen production has been conducted using the combination of untreated secondary sewage sludge (Sss), algal biomass hydrolyzate (Abh), graphene oxide (GO) and bacterial consortia that forms a granular system. Thus, naturally formed granular system produced cumulative H₂ of 1520mL/L in 168h with the maximum production rate of 13.4mL/L/h in 96h at initial pH 7.0, and optimum temperature of 37^oC. It is noticed that the combination of Abh, Sss and GO governed medium showed 42.05% higher cumulative H₂ production along with 22.71% higher production rate as compared to Abh and Sss based H₂ production medium. The strategy presented herein may find potential applications for the low-cost biohydrogen production using waste biomasses including Sss and Abh.

Functional microbiome strategies for the bioremediation of petroleum-hydrocarbon and heavy metal contaminated soils: A review

Petroleum hydrocarbons and heavy metals are the two major soil contaminants that are released into the environment in the forms of industrial effluents. These contaminants exert serious impacts on human health and the sustainability of the environment. In this context, remediation of these pollutants via a biological approach can be effective, low-cost, and eco-friendly approach. The implementation of microorganisms and metagenomics are regarded as the advanced solution for remediating such pollutants. Further, microbiomes can overcome this issue via adopting specific structural, functional and metabolic pathways involved in the microbial community to degrade these pollutants. Genomic sequencing and library can effectively channelize the degradation of these pollutants via microbiomes. Nevertheless, more advanced technology and reliable strategies are required to develop. The present review provides insights into the role of microbiomes to effectively remediate/degrade petroleum hydrocarbons and heavy metals in contaminated soil. The possible degradation mechanisms of these pollutants have also been discussed in detail along with their existing limitations. Finally, prospects of the bioremediation strategies using microbiomes are discussed.

Enhanced biogas production potential analysis of rice straw: Biomass characterization, kinetics and anaerobic co-digestion investigations

Present study of the biofuel potential of rice straw (RS) waste biomass materials. The average activation energy of rice straw was determined from KAS, FWO and Starink are 84.11, 89.62 and 84.52 kJ/mol, respectively. The characterized rice straw biomass has been tested for biogas potential under co-digestion mode of rice straw and cow dung in ratio 1/2. The maximum 339 ml/g Vs of biogas has been recorded in 35 days with CH₄ concentration of 58.3%. The rest being CO₂ as well as H₂S has been found in trace amounts with observed 85% total solids and 74% volatile solids, present in rice straw.

Waste biomass based potential bioadsorbent for lead removal from simulated wastewater

Present study deals with the lead removal from simulated wastewater using cost effective bio-adsorbent of mango seeds cover with kernel (M), and jamun seeds cover with kernel (JP). Lead removal optimization of adsorption parameters has been analyzed by using Response surface methodology (RSM). The optimum adsorption was attained at speed of 500 rpm, 60 mg, pH 6.5 and contact time of 120 min. The adsorption capacities are around 39.15 mg/g of M and 20.28 mg/g of JP bio-adsorbent, and also the maximum Pb removal were observed ̴ 94.85% and 92.78%, respectively. The regression coefficient was best fitted for both bio-adsorbents are Freundlich model and pseudo-first order reaction kinetic.

The Outbreaks of Acute Encephalitis Syndrome in Uttar Pradesh, India (1978–2020) and Its Effective Management: A Remarkable Public Health Success Story

Introduction

Acute encephalitis syndrome (AES) is a major public health enigma in India and the world. Uttar Pradesh (UP) is witnessing recurrent and extensive seasonal AES outbreaks since 1978. Government of India and UP state government have devised various mitigation measures to reduce AES burden and AES associated mortality, morbidity and disability in Uttar Pradesh. The aim of this study was to describe the public health measures taken in order to control seasonal outbreaks of AES in UP between 1978 and 2020.

Methods

We used literature review as a method of analysis, including the Indian government policy documents. This review utilized search engines such as PubMed, Google Scholar, Research Gate, Cochrane, Medline to retrieve articles and information using strategic keywords related to Acute Encephalitis Syndrome. Data was also collected from progress reports of government schemes and websites of Indian Council of Medical Research (ICMR), National Vector Borne Disease Control Programme (NVBDCP) and Integrated Disease Surveillance Programmes (IDSP).

Results

The incidence of AES cases in UP have declined from 18.2 per million population during 2005-2009 to 15 per million population during 2015-2019 [CI 12.6–20.6, P-value < 0.001] and case fatality rate (CFR) reduced from 33% during 1980-1984 to 12.6% during 2015-2019 [CI 17.4–30.98, P-value < 0.001]. AES incidence was 9 (2019) and 7 (2020) cases per million populations respectively and CFR was 5.8% (2019) and 5% (2020). This decline was likely due to active surveillance programs identifying aetiological agents and risk factors of AES cases. The identified etiologies of AES include Japanese encephalitis virus (5–20%), Enterovirus (0.1–33%), Orientia tsutsugamushi (45–60%) and other viral (0.2–4.2%), bacterial (0–5%) and Rickettsial (0.5–2%) causes. The aggressive immunization programs against Japanese encephalitis with vaccination coverage of 72.3% in UP helped in declining of JE cases in the region. The presumptive treatment of febrile cases with empirical Doxycycline and Azithromycin (EDA) caused decline in Scrub Typhus-AES cases. Decrease in incidence of vector borne diseases (Malaria, Dengue, Japanese Encephalitis and Kala Azar) i.e., 39.6/100,000 population in 2010 to 18/100,000 population in 2017 is highlighting the impact of vector control interventions. Strengthening healthcare infrastructure in BRD medical college and establishment of Encephalitis Treatment Centre (ETC) at peripheral health centres and emergency ambulance services (Dial 108) reduced the referral time and helped in early treatment and management of AES cases. The AES admissions increased at ETC centres to 60% and overall case fatality rate of AES declined to 3%. Under clean India mission and Jal Jeevan mission, proportion of population with clean drinking water increased from 74.3% in 1992 to 98.7% in 2020. The proportion of household having toilet facilities increased from 22.9% in 1992 to 67.4% in 2020. Provisions for better nutritional status under state and national nutrition mission helped in reducing the burden of stunting (52%) and wasting (53.4%) among under five children in 1992 to 38.8% (stunting) and 36.8% (wasting) in year 2018. These factors have all likely contributed to steady AES decline observed in UP.

Conclusion

There is a recent steady decline in AES incidence and CFR since implementation of intensive AES surveillance system and JE immunization campaigns which is highlighting the success of interventions made by central and state government to control seasonal AES outbreaks in UP. Currently, AES incidence is 9 cases per million population (in year 2019) and mortality is 5.8%.

Thermo-chemical potential of solid waste seed biomass obtained from plant Phoenix dactylifera and Aegle marmelos L. Fruit core cell

The present study explores thermo-chemical potential of two biomasses namely; Phoenix dactylifera seed (PDS) and Aegle marmelos L core (AMP). These biomasses contain high amount of cellulose and exhibit heating value of 3-18 MJ/kg. The thermal kinetic of both the biomasses have been extensively studied using thermogravimetric analysis (TGA) at four different heating rates 5, 10, 15, and 20 °C/min. Kinetic analysis was carried out using three model-free techniques including Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS) and Starink. The average activation energy has been found to be 173.75, 172.94 and 170.71 kJ/mol, for PDS whereas 170.26, 167.24 and 164.80 kJ/mol, for AMP analyzed through KAS, FWO and Starink methods, respectively. Further, among all these models, the Starink model exhibits better result for the biofuels potential point of view.

Impact of mixed lignocellulosic substrate and fungal consortia to enhance cellulase production and its application in NiFe2O4 nanoparticles mediated enzymatic hydrolysis of wheat straw

Economic biowaste to biofuels production technology suffers from issues including high production cost of cellulase enzyme and its low efficiency. In this study five lignocellulosic biomass based on their high cellulosic contents are employed in 1:1 ratio with mixed fungal consortia to achieve enhance cellulase production via solid state fermentation. Under the optimum condition total 41 IU/gds FP activity was achieved in 120 h at 40 °C and pH 6.0. Further, crude cellulase was evaluated to improve thermal and pH stability under the influence of 2.0 mg/L NiFe₂O₄ nanoparticles, showed stability at 70 °C and pH 6.0 up to 8 h. Consequently, NiFe₂O₄ nanoparticles treated cellulase was used for the enzymatic hydrolysis of alkali treated wheat straw, and total 53 g/L reducing sugars could be produced in 18 h at 65 °C and pH 6.0. Thus, nanoparticles mediated enzymatic hydrolysis exhibited ∼ 29% and ∼ 28% higher sugar yield and productivity as compared to control after 18 h.

Association of single nucleotide polymorphisms in the CD209, MMP9, TNFA and IFNG genes with susceptibility to Japanese encephalitis in children from North India

Japanese encephalitis (JE), an acute encephalitis syndrome disease caused by infection with JE virus (JEV), is an important mosquito borne disease in developing countries. The clinical outcomes of JEV infection show inter individual differences. Only in a minor percent of the infected subjects, the disease progresses into acute encephalitis syndrome. Single nucleotide polymorphisms in the host immune response related genes are known to affect susceptibility to JE. In the present study, 238 JE cases and 405 healthy controls (HCs) without any known history of encephalitis were investigated for SNPs in the CD209 MX1, TLR3, MMP9, TNFA and IFNG genes which are important in the immune response against JEV by PCR based methods. The results revealed higher frequencies of heterozygous genotypes of CD209 rs4804803, MMP9 rs17576, TNFA rs1800629 and IFNG rs2430561 in JE cases compared to HCs. These SNPs were associated with JE in an over-dominant genetic model (Odds ratio with 95% CI 1.51 (1.09-2.10) for CD209 rs4804803, 1.52 (1.09-2.11) for MMP9 rs17576, and 1.55 (1.12-2.15) for IFNG rs2430561). The association of G/A genotype of TNFA rs1800629 with JE was confirmed in a larger sample size. The results suggest the association of CD209 rs4804803, MMP9 rs17576, IFNG rs2430561 and TNFA rs1800629 polymorphisms with susceptibility to JE.

Waste seeds of Mangifera indica, Artocarpus heterophyllus, and Schizizium commune as biochar for heavy metal removal from simulated wastewater

The threat of arsenic contamination in water is a challenging issue worldwide. Millions of people utilize untreated groundwater having high levels of arsenic in developing countries. Design Expert 6.0.8 has been used to design experiments and carried out statistical analysis for optimization of different parameters. It is of prime importance to develop cheap environment friendly bio-sorbent for protecting health of the poor from ill effects of arsenic. In the present investigation, we prepared bio-sorbent from the solid waste seed biomass of Mangifera indica (M), Artocarpus heterophyllus (JF), and Schizizium commune (JP). The characterization of bio-sorbents has been done by using different techniques namely FTIR and XRD. Arsenic concentration was estimated using ICP and adsorption parameters optimized for pH, adsorbent dose, and initial arsenic concentration. At pH 8.4, kinetics study of arsenic removal was M (94%), JF (93%), and JP (92%) for initial concentration of 2.5 ppm. The adsorption kinetics was well explained by Freundlich model and pseudo-second reaction order.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13399-021-02078-5.

Lead removal from synthetic wastewater by biosorbents prepared from seeds of Artocarpus Heterophyllus and Syzygium Cumini

The present investigation deals with removal of lead (Pb⁺²) ions from waste water using biosorbent prepared from seeds of Artocarpus heterophyllus (SBAh) and Syzygium cumini (SBSc). Biosorbents surface has been characterized through FT-IR spectroscopy to probe the presence of functional groups. Response surface methodology enabled optimized conditions (Pb⁺² concentration 2 μg/mL, pH 5.8 and bioadsorbent dose 60 mg) resulted in Pb⁺² removal ~96% for SBAh and ~93% for SBSc at agitation speed 300 rpm. The adsorption capacity has been found to be 4.93 mg/g for SBAh and 3.95 mg/g for SBSc after 70 min. At optimal experimental conditions, kinetics of biosorption was explained well by inter-particle diffusion model for SBAh (R² = 0.99) whereas Elovich model best fitted for SBSc (R² = 0.98). Further, both the biosorbents followed Temkin adsorption isotherm model.