Photocatalytic removal of the cyanobacterium Microcystis aeruginosa PCC7813 and four microcystins by TiO2 coated porous glass beads with UV-LED irradiation

Monitoring of toxic cyanobacterial blooms in Lalla Takerkoust reservoir by satellite imagery and microcystin transfer to surrounding farms

Cyanobacterial harmful algal blooms (CyanoHABs) threaten public health and freshwater ecosystems worldwide. In this study, our main goal was to explore the dynamics of cyanobacterial blooms and how microcystins (MCs) move from the Lalla Takerkoust reservoir to the nearby farms. We used Landsat imagery, molecular analysis, collecting and analyzing physicochemical data, and assessing toxins using HPLC. Our investigation identified two cyanobacterial species responsible for the blooms: Microcystis sp. and Synechococcus sp. Our Microcystis strain produced three MC variants (MC-RR, MC-YR, and MC-LR), with MC-RR exhibiting the highest concentrations in dissolved and intracellular toxins. In contrast, our Synechococcus strain did not produce any detectable toxins. To validate our Normalized Difference Vegetation Index (NDVI) results, we utilized limnological data, including algal cell counts, and quantified MCs in freeze-dried Microcystis bloom samples collected from the reservoir. Our study revealed patterns and trends in cyanobacterial proliferation in the reservoir over 30 years and presented a historical map of the area of cyanobacterial infestation using the NDVI method. The study found that MC-LR accumulates near the water surface due to the buoyancy of Microcystis. The maximum concentration of MC-LR in the reservoir water was 160 µg L-1. In contrast, 4 km downstream of the reservoir, the concentration decreased by a factor of 5.39 to 29.63 µgL-1, indicating a decrease in MC-LR concentration with increasing distance from the bloom source. Similarly, the MC-YR concentration decreased by a factor of 2.98 for the same distance. Interestingly, the MC distribution varied with depth, with MC-LR dominating at the water surface and MC-YR at the reservoir outlet at a water depth of 10 m. Our findings highlight the impact of nutrient concentrations, environmental factors, and transfer processes on bloom dynamics and MC distribution. We emphasize the need for effective management strategies to minimize toxin transfer and ensure public health and safety.

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Effective photocatalytic inactivation of Microcystis aeruginosa by Ag3VO4/BiVO4 heterojunction under visible light

In recent years, photocatalytic technology has been increasingly used for the treatment of algal blooms in water bodies due to its high efficiency and environmental advantages. However, conventional semiconductor materials suffer from high electron-hole recombination rate, low carrier mobility and weak surface adsorption ability, which made their photocatalytic performance limited. Therefore, the photocatalytic performance of the composites can be improved by coupling another semiconductor material to form a heterojunction to accelerate electron transfer. In this study, a novel composite Ag3VO4/BiVO4 (ABV) photocatalyst was successfully prepared by in-situ deposition method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst showed excellent photocatalytic activity, and the degradation rate of M. aeruginosa chlorophyll a was up to 99.8% within 4 h under visible light. During the photocatalytic degradation, the morphology of algae cells, the permeability of cell membrane, the organic matter inside and outside the cells, the antioxidant system and the soluble protein were seriously damaged. Moreover, three cycle experiments showed that the prepared ABV photocatalyst had high reusability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In general, the synthesized ABV photocatalyst can effectively inactivate cyanobacteria under visible light and provided a new method for M. aeruginosa removal in water.

Solar-driven semi-conductor photocatalytic water treatment (TiO2, g-C3N4, and TiO2+g-C3N4) of cyanotoxins: Proof-of-concept study with microcystin-LR

Cyanobacteria and their toxins are a threat to drinking water safety as increasingly cyanobacterial blooms (mass occurrences) occur in lakes and reservoirs all over the world. Photocatalytic removal of cyanotoxins by solar light active catalysts is a promising way to purify water at relatively low cost compared to modifying existing infrastructure. We have established a facile and low-cost method to obtain TiO₂ and g-C₃N₄ coated floating photocatalysts using recycled glass beads. g-C₃N₄ coated and TiO₂+g-C₃N₄ co-coated beads were able to completely remove microcystin-LR in artificial fresh water under both natural and simulated solar light irradiation without agitation in less than 2 h. TiO₂ coated beads achieved complete removal within 8 h of irradiation. TiO₂+g-C₃N₄ beads were more effective than g-C₃N₄ beads as demonstrated by the increase reaction rate with reaction constants, 0.0485 min^-1 compared to 0.0264 min^-1 respectively, with TiO₂ alone found to be considerably slower 0.0072 min^-1. g-C₃N₄ based photocatalysts showed a similar degradation pathway to TiO₂ based photocatalysts by attacking the C6-C7 double bond on the Adda side chain.

Suppressing cyanobacterial dominance by UV-LED TiO2-photocatalysis in a drinking water reservoir: A mesocosm study

Cyanobacteria and their toxic secondary metabolites present challenges for water treatment globally. In this study we have assessed TiO₂ immobilized onto recycled foamed glass beads by a facile calcination method, combined in treatment units with 365 nm UV-LEDs. The treatment system was deployed in mesocosms within a eutrophic Brazilian drinking water reservoir. The treatment units were deployed for 7 days and suppressed cyanobacterial abundance by 85% while at the same time enhancing other water quality parameters; turbidity and transparency improved by 40 and 81% respectively. Genomic analysis of the microbiota in the treated mesocosms revealed that the composition of the cyanobacterial community was affected and the abundance of Bacteroidetes and Proteobacteria increased during cyanobacterial suppression. The effect of the treatment on zooplankton and other eukaryotes was also monitored. The abundance of zooplankton decreased while Chrysophyte and Alveolata loadings increased. The results of this proof-of-concept study demonstrate the potential for full-scale, in-reservoir application of advanced oxidation processes as complementary water treatment processes.

Research progress of photocatalysis for algae killing and inhibition: a review

The healthy development of biodiversity has been threatened frequent water eutrophication. In recent years, photocatalytic technology, which has attracted researchers' attention, not only showed increasing potential in the field of organic pollutant degradation, but also many kinds of photocatalysts were used in the field of red tide pollution control at present, which showed superior ability to inactivate harmful algae and degrade algal toxins. Researches have also explored the mechanisms of photocatalytic algae inhibition. In this study, the current research progress in the field of photocatalytic algae inhibition was systematically discussed from several aspects, such as common types of photocatalysts, modification methods of photocatalysts, types of tested algae for photocatalytic algae inhibition, and action mechanism of inactivated algae cells, so as to provide a certain theoretical basis for further application research of photocatalysts in the field of algae removal in the later period.

Efficient photocatalytic inactivation of Microcystis aeruginosa by a novel Z-scheme heterojunction tubular photocatalyst under visible light irradiation

The design of a photocatalyst for efficient algal inactivation under visible light is essential for the application of photocatalysis to the control of harmful algal blooms. In this study, a novel Z-scheme heterojunction tubular photocatalyst, Ag₂O@PG, was synthesized by chemically depositing silver oxide compounded with P-doped hollow tubular graphitic carbon nitride for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa). The photocatalytic algal inactivation experiments showed that the photocatalytic activity of Ag₂O@PG was influenced by the ratio of the composition of the obtained materials. The optimal algal inactivation efficiency was observed when using Ag₂O@PG-0.4 at a dosage of 0.2 g/L. It was able to achieve a 99.1 % M. aeruginosa inactivation at an initial concentration of 4.5 × 10⁶ cells/mL following 5 h' visible light irradiation. During the process, the cell membrane permeability and cell morphology changed. Furthermore, under the constant attack of superoxide radicals and holes caused by Ag₂O@PG, the superoxide dismutase, glutathione and malondialdehyde of algae cells increased during the experiments to alleviate oxidative damage. Eventually, the antioxidant system of algae cells was destroyed. To further validate the potential application of Ag₂O@PG-0.4 in real algal bloom environment, an experiment in real water samples was carried out. Overall, the Ag₂O@PG-0.4 as an efficient photocatalyst has a promising potential for emergency treatment measures to alleviate algal blooms.

N-TiO2-Coated SiC Foam for the Treatment of Dyeing Wastewater under Blue Light LED Irradiation

TiO2 is widely used for the photocatalytic degradation of organic pollutants in wastewater, but the practical applications of the photocatalyst are limited due to its poor visible light absorption and low recovery rate. In this study, high production of nitrogen-doped TiO2 was achieved by a hydrolysis precipitation method; the obtained N-TiO2 had a small crystallite size and good dispersibility. The effect of calcining temperature on the photocatalytic performance of N-TiO2 was evaluated through the degradation of methylene blue (MB) in a blue light LED irradiation cylinder, it was found the N-TiO2 calcined at 400 °C showed the best photocatalytic activity. Then the N-TiO2 was immobilized on SiC ceramic foam by dip-coating with PVA as the binder. The prepared N-TiO2/SiC foam showed excellent photocatalytic activity under blue light LED irradiation; as high as 96.3% of MB was degraded at optimum conditions. After five cycles of MB photodegradation, the photocatalytic activity of N-TiO2/SiC foam only changed slightly, which makes it a promising photocatalytic material for wastewater treatment.

Removal of microcystins from water and primary treatment technologies - A comprehensive understanding based on bibliometric and content analysis, 1991-2020

Microcystins are a group of heptapeptide hepatotoxins produced by a variety of algae and are frequently detected in aquatic ecosystems, posing a global threat to ecological stability and human health. However, it is difficult to eliminate them completely and innocuously from water by conventional water treatment processes. This study comprehensively evaluated a total of 821 original articles retrieved from the Web of Science (1991-2020) about the removal of microcystins using bibliometric and content analysis to provide a qualitative and quantitative research landscape and a global view of research hotspots and future research directions. Furthermore, the primary and promising treatment technologies for microcystin pollution were also summarized and discussed. The results indicated an urgent practical demand to remediate microcystin pollution according to the increasing number of publications since 2005. China had the highest number of publications, whereas the United States was the core country in the international collaboration network. The Chinese Academy of Sciences and University of Cincinnati showed their leading positions considering article amounts and academic cooperation. Dionysiou DD contributed the most articles, and Carmichael WW had the highest number of co-citations. Three treatment technologies, including biodegradation, chemical oxidation and adsorption, were the major strategies to remediate the pollution of microcystins in water. In addition, the toxicity of toxins/their metabolites, degradation kinetics, and elimination mechanism were also important research contents. Bacterial degradation, photocatalytic degradation, and multiple-technologies approach have been identified with great potential and should be given more attention in future studies. This work summarizes the current research status on microcystin management, provides a valuable reference for researchers to identify potential opportunities for collaboration in related fields, and guides future research directions to inter-disciplinary and multi-perspective approaches.

Effects and behaviors of Microcystis aeruginosa in defluorination by two Al-based coagulants, AlCl3 and Al13

The complexity of natural water made it difficult to remove fluoride. Based on the environmental problems found in the investigation, the fluoride removal research in the water containing algal cells was carried out. In this study, AlCl₃ and [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ (Al₁₃) were used to remove fluoride. Additionally, the role of aluminum speciation in fluoride removal and the effect of Microcystis aeruginosa on the fluoride removal by different aluminum species coagulants were elucidated. The results showed that AlCl₃ mainly removed fluoride by physical interactions, surface adsorption and enmeshment. When algal cells were added to the system, the fluoride removal rate increased from 22.75 % to 72.99 % at a dosage of 40.0 mg/L. This was because algal cells greatly increased the distribution of Al(OH)₃ in the flocs. In particular, the specific surface area of the flocs containing algal cells reached 160.77 m²/g, which allowed more fluoride to be adsorbed. However, excessive Al³⁺ led to serious damage to algal cells and release of intracellular organic matter (IOM), worsening the effect of defluoridation. F^- and Al³⁺ formed AlF²⁺ and AlF₂⁺ via complexation in water. These compounds were not conducive to defluoridation. Al₁₃ removed fluorine mainly through ion exchange, substitution and hydrogen bonding. Algal cells had an inhibitory effect on defluorination, which was observed in the process of coagulation by different Al dosages. Al₁₃ achieved agglomeration of algal cells and generated small and dense flocs through charge neutralization and electrostatic patch mechanism. Once Al₁₃ combined with algal cells and algae organic matter (AOM), the reaction between Al₁₃ and fluoride would be weakened. Al₁₃ not only maintained the defluoridation performance, but also did not damage the integrity of algal cells, even at high dosages.

Comparison of UV-A photolytic and UV/TiO2 photocatalytic effects on Microcystis aeruginosa PCC7813 and four microcystin analogues: A pilot scale study

To date, the high cost of supplying UV irradiation has prevented the widespread application of UV photolysis and titanium dioxide based photocatalysis in removing undesirable organics in the water treatment sector. To overcome this problem, the use of UV-LEDs (365 nm) for photolysis and heterogeneous photocatalysis applying TiO₂ coated glass beads under UV-LED illumination (365 nm) in a pilot scale reactor for the elimination of Microcystis aeruginosa PCC7813 and four microcystin analogues (MC-LR, -LY, -LW, -LF) with a view to deployment in drinking water reservoirs was investigated. UV-A (365 nm) photolysis was shown to be more effective than the UV/TiO₂ photocatalytic system for the removal of Microcystis aeruginosa cells and microcystins. During photolysis, cell density significantly decreased over 5 days from an initial concentration of 5.8 × 10⁶ cells mL^-1 until few cells were left. Both intra- and extracellular microcystin concentrations were significantly reduced by 100 and 92 %, respectively, by day 5 of the UV treatment for all microcystin analogues. During UV/TiO₂ treatment, there was great variability between replicates, making prediction of the effect on cyanobacterial cell and toxin behavior difficult.

Phototransformation of an emerging cyanotoxin (Aerucyclamide A) in simulated natural waters

Aerucyclamide A (ACA) is an emerging cyanopeptide toxin produced by cyanobacteria, and its transformation pathway has rarely been reported. In the present study, ACA was purified from cyanobacterial extracts, and photodegradation processes were investigated in dissolved organic matter (DOM) solutions. Under simulated solar irradiation, the photodegradation of ACA was dominated by ^•OH oxidation, accounting for ~72% of the indirect photodegradation. The bimolecular reaction rate constant of ACA with ^•OH was (6.4 ± 0.2) × 10⁹M ^- 1s ^- 1. Our results indicated that the major reactive sites of ACA toward ^•OH are thiazoline and thiazole moieties. Product analysis via high-resolution mass spectrometry suggested that hydrogen abstraction and gradual hydroxylation are the main photodegradation pathways. The acute toxicity assessment indicate that the products generated in photolysis process did not show any measurable toxicity to Thamnocephalus platyurus. Photodegradation experiments with various DOM-phycocyanin mixtures demonstrated that the half-life of ACA is much longer than that of microcystin-LR.

Insights into the underlying mechanisms for integrated inactivation of A. spiroides and depression of disinfection byproducts by plasma oxidation

Cyanobacteria blooms threaten water supply and are potential sources for disinfection byproducts (DBPs) formation. In this study, the underlying mechanisms for effective removal of A. spiroides and the following depression on the formation of DBPs were disclosed. Highly efficient inactivation (more than 99.99%) of A. spiroides was realized by the plasma treatment within 12 min, and 93.4% of Anatoxin-a was also removed within 12 min, with no signals of resurrection after 7 days' re-cultivation. Transcriptomic analysis demonstrated that the expressions of the genes related to cell walls and peripherals, thylakoid membranes, photosynthetic membranes, and detoxification of toxins were distinctly altered. The generated reactive oxidative species (ROS), including ·OH, O₂^·-, and ¹O₂, attacked A. spiroides and resulted in membrane damage and algae organic matter (AOM) release. EEM-PARAFAC analysis illustrated that the AOM compositions were subsequently decomposed by the ROS. As a result, the formation potentials of the C-DBPs and N-DBPs were significantly inhibited, due to the effectively removal of AOM and Anatoxin-a. This study disclosed the underneath mechanisms for the effective inactivation of A. spiroides and inhibition of the following formation of the DBPs, and supplied a prospective technique for integrated pollutant control of cyanobacterial containing drinking water.

Oxidative stress in the cyanobacterium Microcystis aeruginosa PCC 7813: Comparison of different analytical cell stress detection assays

Cyanobacterial blooms are observed when high cell densities occur and are often dangerous to human and animal health due to the presence of cyanotoxins. Conventional drinking water treatment technology struggles to efficiently remove cyanobacterial cells and their metabolites during blooms, increasing costs and decreasing water quality. Although field applications of hydrogen peroxide have been shown to successfully suppress cyanobacterial growth, a rapid and accurate measure of the effect of oxidative stress on cyanobacterial cells is required. In the current study, H₂O₂ (5 and 20 mg L^-1) was used to induce oxidative stress in Microcystis aeruginosa PCC 7813. Cell density, quantum yield of photosystem II, minimal fluorescence and microcystin (MC-LR, -LY, -LW, -LF) concentrations were compared when evaluating M. aeruginosa cellular stress. Chlorophyll content (determined by minimal fluorescence) decreased by 10% after 48 h while cell density was reduced by 97% after 24 h in samples treated with 20 mg L^-1 H₂O₂. Photosystem II quantum yield (photosynthetic activity) indicated cyanobacteria cell stress within 6 h, which was considerably faster than the other methods. Intracellular microcystins (MC-LR, -LY, -LW and -LF) were reduced by at least 96% after 24 h of H₂O₂ treatment. No increase in extracellular microcystin concentration was detected, which suggests that the intracellular microcystins released into the surrounding water were completely removed by the hydrogen peroxide. Thus, photosynthetic activity was deemed the most suitable and rapid method for oxidative cell stress detection in cyanobacteria, however, an approach using combined methods is recomended for efficient water treatment management.