Application of constructed wetlands in the PAH remediation of surface water: A review

Insights into poly-and perfluoroalkyl substances (PFAS) removal in treatment wetlands: Emphasizing the roles of wetland plants and microorganisms

Poly- and perfluoroalkyl substances (PFAS) are widespread emerging contaminants in aquatic environments, raising serious concerns due to their persistence and potential toxicity to both human health and ecosystems. Treatment wetlands (TWs) provide a sustainable, low-carbon solution for PFAS removal by harnessing the combined actions of substrates, plants, and microorganisms. This review evaluates the effectiveness of TWs in PFAS treatment, emphasizing their role as a post-treatment option for conventional wastewater treatment plants. Mass balance analysis reveals that substrate adsorption was the primary pathway for PFAS removal from TWs, while plant uptake and subsequent harvesting treatments, as well as microbial degradation, contribute substantially to long-term PFAS removal. Comparisons of bioaccumulation factor (BCF) and translocation factors (TF) between wetland and terrestrial plants demonstrate that wetland plants are particularly effective at adsorbing long-chain PFAS and transferring them from roots to aboveground tissues. The diverse environmental conditions within TWs support varied microbial communities, facilitating the evolution of PFAS-degrading microorganisms. Wetland microorganisms demonstrate the capacity to break down PFAS through processes such as head group transformations (e.g., decarboxylation, desulfonation) and defluorination (e.g., elimination, reductive defluorination, hydrolysis, dealkylation). This review emphasizes the crucial role of wetland plants and microorganisms in the sustainable removal of PFAS in TWs, providing insights for the ecological remediation of PFAS-contaminated wastewater.

Evaluation of the phytotoxicity and accumulation potential of nitro-polycyclic aromatic hydrocarbon, 3-nitrofluoranthene, on water status, photosystem II efficiency, antioxidant activity and ROS accumulation in Salvinia natans

Organic pollutants, which have become one of the most striking problems of today, raise concerns about the spread of polyaromatic hydrocarbon (PAH) compounds into ecosystems and their toxic effects on living organisms. The purpose of this study was to determine how harmful 3-nitrofluoranthene (3-NF) exposure was to Salvinia natans, a freshwater macrophyte. Furthermore, it clarifies how this aquatic plant, which is frequently used in phytoremediation of water contaminants and wastewater treatments, interacts with PAHs and contributes to the development of bioremediation methods. In S. natans exposed to stress (10 μM (3-NF10), 25 μM (3-NF25), 50 μM (3-NF50), 100 μM (3-NF100), 250 μM (3-NF250), 500 μM (3-NF500), 1000 μM (3-NF1000) 3-nitrofluoranthene), 3-NF accumulation, oxidative stress indicators, photosynthetic efficiency, and antioxidant system activity alterations were investigated for this objective. The findings demonstrated that S. natans could effectively accumulate 3-NF, and at a concentration of 1000 μM, the 3-NF content in the leaves reached approximately 1112 mg/kg. While its adverse effects on growth (RGR) and photosynthesis (Fv/Fm) remained mild up to a concentration of 250 μM, the severity of the inhibitions increased at higher concentrations. On the other hand, exposure to 3-NF triggered the antioxidant system in S. natans plants and resulted in an increase of 60 %, 80 %, 47 % and 27 % in superoxide dismutase (SOD) activity in 3-NF10-25-50-100 groups, respectively. Conversely, in comparison to control plants, higher concentrations of 3-NF treatments resulted in insufficient antioxidant activity, increased lipid peroxidation (TBARS concentration), and hydrogen peroxide (H2O2). In conclusion, S. natans plants tolerated 3-NF accumulation up to 250 μM concentration despite limitations in growth suppression and photosynthetic capacity, proving that S. natans has the potential to be used in phytoextraction studies of 3-NF-polluted waters.

A hybrid system based on the combination of adsorption, electrocoagulation, and wetland treatment for the effective remediation of industrial wastewater from underground coal gasification (UCG)

The study verified the effectiveness of treating post-process underground coal gasification (UCG) wastewater, containing high loads of inorganic and organic pollutants, using constructed wetlands (CW) enhanced by hybrid adsorption and electrocoagulation (EC) techniques. Four different system configurations were tested: wetland, EC/wetland, adsorbent/wetland, and EC/adsorbent/wetland. Each experiment lasted 60 days. The feed and effluents from each treatment step were analysed for their basic physicochemical parameters such as metals and trace elements, phenols, sulphides, cyanides, total organic carbon (TOC), chemical oxygen demand (COD), biological oxygen demand (BOD), benzene, toluene, ethylene, xylene (BTEX), and polyaromatic hydrocarbons (PAHs). Systems with electrocoagulation proved to be effective in the case of metal removal. The best results were obtained for Fe, Ni, Sb and As (up to 96%, 98%, 94% and 82% respectively). The systems were ineffective in removing Mn. All tested systems showed the greatest effectiveness in the treatment of wastewater from phenols, BTEX and CN (almost 100% removal). CWs without preliminary electrocoagulation showed practically 100% effectiveness in removing BTEX after 14 days of treatment. Electrocoagulation was particularly effective in reduction of large quantity of PAH compounds (from 1228 μg/l to below 0.050 μg/l). Effective toxicity reduction from V class to II class after 60 days in comparison with meeting the requirements contained in the Best Available Techniques (BAT) document, showed that all tested systems were favorable in terms of UCG wastewater treatment. A significant decrease in toxicity was observed in just 14 days (around 90% reduction of toxicity measured in TU values for systems without adsorbent and around 75% for systems with adsorbent). The wastewater were still toxic due to the formation of degradation intermediates of organic compounds (BTEX, PAHs, phenol compounds), despite a significant decrease in the concentration of contaminants, therefore toxicity assessment should be one of the evaluation criteria for industrial wastewater treatment.

Review of hydraulic conditions optimization for constructed wetlands

Hydraulic conditions exert a comprehensive and vital influence on constructed wetlands (CWs). However, research on this subject is relatively limited. Hydraulic parameters can be categorized into design and operational parameters based on their properties. The design parameters are represented by the hydraulic gradient, substrate porosity, and aspect ratio, while operational parameters are represented by the hydraulic retention time, hydraulic loading rate, and water depth. These parameters directly or indirectly affect the operational lifespan and pollutant removal performance of CWs. Currently, the primary measures for optimizing the hydraulic conditions of CWs involve hydraulic structure and numerical simulation optimization methods. In this review, we aimed to elucidate the impact of hydraulic conditions on CW performance and summarize current optimization strategies. By highlighting the significance of hydraulic parameters in enhancing pollutant removal and extending operational lifespan, this review provides valuable insights for improving CW design and management. The findings will be useful for researchers and practitioners seeking to optimize CW systems and advance the application of nature-based solutions for wastewater treatment.

Biotic/abiotic transformation mechanisms of phenanthrene in iron-rich constructed wetland under redox fluctuation

Iron-rich constructed wetlands (CWs) could promote phenanthrene bioremediation efficiently through biotic and abiotic pathways, which have gained increasing attention. However, the biotic/abiotic transformation mechanisms of trace organic contaminants in iron-rich CW are still ambiguous. Herein, three CWs (i.e., CW-A: Control; CW-B: Iron-rich CW, CW-C: Iron-rich CW + tidal flow) were constructed to investigate the transformation mechanisms of phenanthrene through Mössbauer spectroscopy and metagenomics. Results demonstrated CW-C achieved the highest phenanthrene removal (94.0 %) and bacterial toxicity reduction (92.1 %) due to the optimized degradation pathway, and subsequently achieved the safe transformation of phenanthrene. Surface-bound/low-crystalline iron regulated hydroxyl radical (·OH) production predominantly, and its utilization was promoted in CW-C, which also improved electron transfer capacity. The enhanced electron transfer capacity led to the enrichment of PAH-degrading microorganisms (e.g., Thauera) and keystone species (Sphingobacteriales bacterium 46-32) in CW-C. Additionally, the abundances of phenanthrene transformation (e.g., EC:1.14.12.-) and tricarboxylic-acid-cycle (e.g., EC:2.3.3.1) enzyme were up-regulated in CW-C. Further analysis indicated that the safe transformation of phenanthrene was mainly attributed to the combined effect of abiotic (·OH and surface-bound/low-crystalline iron) and biotic (microbial community and diversity) mechanisms in CW-C, which contributed similarly. Our study revealed the essential role of active iron in the safe transformation of phenanthrene, and was beneficial for enhanced performance of iron-rich CW.

Dissecting the long-term neurobehavioral impact of embryonic benz[a]anthracene exposure on zebrafish: Social dysfunction and molecular pathway activation

Benz[a]anthracene (BaA), a prevalent environmental contaminant within the polycyclic aromatic hydrocarbon class, poses risks to both human health and aquatic ecosystems. The impact of BaA on neural development and subsequent social behavior patterns remains inadequately explored. In this investigation, we employed the zebrafish as a model to examine the persisting effects of BaA exposure on social behaviors across various developmental stages, from larvae, juveniles to adults, following embryonic exposure. Our findings indicate that BaA exposure during embryogenesis yields lasting neurobehavioral deficits into adulthood. Proteomic analysis highlights that BaA may impair neuro-immune crosstalk in zebrafish larvae. Remarkably, our proteomic data also hint at the activation of the aryl hydrocarbon receptor (AHR) and cytochrome P450 1A (CYP1A) pathway by BaA, leading to the hypothesis that this pathway may be implicated in the disruption of neuro-immune interactions, contributing to observable behavioral disruptions. In summary, our findings suggest that early exposure to BaA disrupts social behaviors, such as social ability and shoaling behaviors, from the larval stage through to maturity in zebrafish, potentially through the detrimental effects on neuro-immune processes mediated by the AHR-CYP1A pathway.

A systematic review of polycyclic aromatic hydrocarbon pollution: A combined bibliometric and mechanistic analysis of research trend toward an environmentally friendly solution

Pollution caused by polycyclic aromatic hydrocarbons (PAHs) is a significant concern. This concern has become more problematic given the rapid modification of PAHs in the environment during co-contamination to form substituted PAHs. This review aims to integrate bibliometric analysis with a rigorous study of mechanistic insights, resulting in a more comprehensive knowledge of evolving research trends on PAH remediation. The results show that research in this field has progressed over the years and peaked in 2022, potentially due to the redirection of resources toward emerging pollutants, hinting at the dynamic nature of environmental research priorities. During this year, 158,147 documents were published, representing 7 % of the total publications in the field between 2000 and 2023. The different remediation methods used for PAH remediation were identified and compared. Bioremediation, having >90 % removal efficiency, has been revealed to be the best technique because it is cost-effective and easy to operate at large scale in situ and ex-situ. The current challenges in PAH remediation have been detailed and discussed. Implementing innovative and sustainable technologies that target pollutant removal and valuable compound recovery is necessary to build a more robust future for water management.

Molecular transformation of dissolved organic matter in manganese ore-mediated constructed wetlands for fresh leachate treatment

The organic matter (OM) and nitrogen in Fresh leachate (FL) from waste compression sites pose environmental and health risks. Even though the constructed wetland (CW) can efficiently remove these pollutants, the molecular-level transformations of dissolved OM (DOM) in FL remain uncertain. This study reports the molecular dynamics of DOM and nitrogen removal during FL treatment in CWs. Two lab-scale vertical-flow CW systems were employed: one using only sand as substrates (act as a control, CW-C) and the other employing an equal mixture of manganese ore powder and sand (experimental, CW-M). Over 488 days of operation, CW-M exhibited significantly higher removal rates for chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), and dissolved organic matter (represented by dissolved organic carbon, DOC) at 98.2 ± 2.5%, 99.2 ± 1.4%, and 97.9 ± 1.9%, respectively, in contrast to CW-C (92.8 ± 6.8%, 77.1 ± 28.1%, and 74.7 ± 9.5%). The three-dimensional fluorescence excitation-emission matrix (3D-EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analyses unveiled that the influent DOM was predominantly composed of readily biodegradable protein-like substances with high carbon content and low unsaturation. Throughout treatment, it led to the degradation of low O/C and high H/C compounds, resulting in the formation of DOM with higher unsaturation and aromaticity, resembling humic-like substances. CW-M showcased a distinct DOM composition, characterized by lower carbon content yet higher unsaturation and aromaticity than CW-C. The study also identified the presence of Gammaproteobacteria, reported as Mn-oxidizing bacteria with significantly higher abundance in the upper and middle layers of CW-M, facilitating manganese cycling and improving DOM removal. Key pathways contributing to DOM removal encompassed adsorption, catalytic oxidation by manganese oxides, and microbial degradation. This study offers novel insights into DOM transformation and removal from FL during CW treatment, which will facilitate better design and enhanced performance.

Multimedia distribution, dynamics, and seasonal variation of PAHs in Songhua wetland: Implications for ice-influenced conditions

The knowledge of polycyclic aromatic hydrocarbons (PAHs) in wetlands remains limited. There is a research need for the dynamics between interfaces of multimedia when ice is present in this fragile ecosystem. In this study, sediment, open-water, sub-ice water, and ice samples were collected from the Songhua wetland to study the behaviors of PAHs with and without influences from ice. The concentration of all individual PAHs in sub-ice water (370-1100 ng/L) were higher than the open-water collected from non-ice-covered seasons (50-250 ng/L). Enrichment of PAHs in the ice of wetland was found, particularly for high-molecular-weight PAHs (HMW). This could be attributed to the relatively lower polarity of hydrocarbons compounds, making them more likely to remain in the ice layer during freezing. Source assessments reveal common sources for sub-ice water and ice, which differ from those in the open water in non-ice-covered seasons. This difference is primarily attributed to heating activities in the Harbin during winter. The average percentage contributions were 79% for sub-ice water and 36% for ice related to vehicle exhausts and coal combustion. Additionally, wood burning contributed 25% to sub-ice water and 62% to ice. Sediment in the wetland was found to serve as a final deposit particularly for heavier PAHs, especially those with 6 rings. Sediment also has the potential to act as a source for the secondary emission of low-molecular-weight PAHs (LMW) congeners into the water. PAHs in wetland displayed low ecological risk, while HMW PAHs with relative higher ecological risk is recommended to be further monitored.

Characteristics of polycyclic aromatic hydrocarbons (PAHs) removal by nanofiltration with and without coexisting organics

Polycyclic aromatic hydrocarbons (PAHs) are contaminants of great concern owing to their persistence, toxicity, and bioaccumulation in aquatic environments. In this study, nanofiltration (NF) was used to investigate the removal of naphthalene (NAP) and phenanthrene (PHE) using three membranes of NF270, NF90, and DK. Subsequently, we examined the effects of coexisting organics on PAHs removal. Based on the results, DK was determined to be the optimal membrane for removing PAHs by comparing the membrane flux and pollutant rejection. The membrane flux reached 34.32 L/m2·h, and the NAP and PHE rejections were 92.21% and 97.85%, respectively, at transmembrane pressure (TMP) of 5 bar using DK. Coexisting organics decreased the membrane fluxes of NF270 and DK in the following order: protein > glucose > humic acid. The NAP and PHE rejections were obviously improved using NF270 in the following order: humic acid > protein > glucose. The PHE rejection was slightly improved using DK. A low concentration of organics could reduce the NAP rejection using DK; however, the NAP rejection could be restored at high concentrations of organics, except for humic acid. Coexisting organics could cause severe membrane fouling. The order of the effect of different coexisting organics on membrane fouling was protein > humic acid > glucose. The total investment and operating costs were about 1.47 and 0.187 million dollars, respectively, for treating PAHs solution using DK when the feed flow was 300 m3/d.

Performance and mechanism of SMX removal by an electrolysis-integrated ecological floating bed at low temperatures: A new perspective of plant activity, iron plaque, and microbial functions

Improvements in plant activity and functional microbial communities are important to ensure the stability and efficiency of pollutant removal measures in cold regions. Although electrochemistry is known to accelerate pollutant degradation, cold stress acclimation of plants and the stability and activity of plant-microbial synergism remain poorly understood. The sulfamethoxazole (SMX) removal, iron plaque morphology, plant activity, microbial community, and function responses were investigated in an electrolysis-integrated ecological floating bed (EFB) at 6 ± 2 ℃. Electrochemistry significantly improved SMX removal and plant activity. Dense and uniform iron plaque was found on root surfaces in L-E-Fe which improved the plant adaptability at low temperatures and provided more adsorption sites for bacteria. The microbial community structure was optimized and the key functional bacteria for SMX degradation (e.g., Actinobacteriota, Pseudomonas) were enriched. Electrochemistry improves the relative abundance of enzymes related to energy metabolism, thereby increasing energy responses to SMX and low temperatures. Notably, electrochemistry improved the expression of target genes (sadB and sadC, especially sadC) involved in SMX degradation. Electrochemistry enhances hydrogen bonding and electrostatic interactions between SMX and sadC, thereby enhancing SMX degradation and transformation. This study provides a deeper understanding of the electrochemical stability of antibiotic degradation at low temperatures.

Uptake mechanism, translocation, and transformation of organophosphate esters in water hyacinth (Eichhornia crassipes): A hydroponic study

Owing to their dominant wastewater origin, bioavailability, and toxicity, the occurrence and behavior of organophosphate esters (OPEs) in aquatic systems have attracted considerable attention over the past two decades. Aquatic plants can accumulate and metabolize OPEs in water, thereby playing an important role in their behavior and fate in waterbodies. However, their uptake, translocation and transformation mechanisms in plants remain incompletely characterized. We investigated the accumulation and transformation of OPEs in water hyacinth (Eichhornia crassipes) through a series of hydroponic experiments using three representative OPEs, tris(2-chloroethyl) phosphate (TCEP), tris(2-butoxyethyl) phosphate (TBEP), and triphenyl phosphate (TPP). These OPEs can not only be adsorbed onto and enter plant roots via passive diffusion pathways, which are facilitated by anion channels and/or aquaporins, but also can return to the solution when concentration gradients exist. After entry, hydrophilic TCEP showed a dominant distribution in the cell sap, strong acropetal transportability, and rapid translocation rate, whereas hydrophobic TPP was mostly retained in the root cell wall and therefore demonstrated weak acropetal transportability; TBEP with moderate hydrophilicity remained in the middle. All these OPEs can be transformed into diesters, which presented higher proportions in the cell sap and therefore have stronger acropetal transferability than their parent OPEs. TCEP exhibits the lowest biodegradability, followed by TPP and TBEP. These OPEs exerted apparent effects on plant growth, photosynthesis, and the diversity and composition of the rhizosphere microbial community.

Release of dissolved organic matter from wetland plants and its interaction with polycyclic aromatic hydrocarbons

Dissolved organic matter (DOM) derived from wetland plants played a critical role in CWs pollutant migration. This study investigated the character and release pattern of DOM derived from two wetland plants, Phragmites australis and Cladophora sp., and the interaction between DOM with phenanthrene (PHE), benzo(a)pyrene (Bap), and benzo [k]fluoranthene (BkF) under different physical conditions were also studied using spectroscopic techniques. DOM release was related to plant species and withering stage. Humic acid (HA)-like fractions (C3 and C5) were dominated in P. australis (52%) and completely withered Cladophora sp. groups (55%), while protein-like fractions (C1 and C2) dominated in early withered Cladophora sp. groups (52%). Due to the cell and tissue structure difference among plants and their withering stage, DOM derived from early withered P. australis revealed a two-stage slow-fast phase, while other groups were linearly released (R2 0.87207-0.97091). A strong correlation existed between HA-like fractions and water quality index, reflecting the critical influence of plant decay in CWs operation performance. The analysis with Stern-Volmer equation indicated that plant-based DOM interacted with PAHs to form ground state complexes with possible involvement of π-π interaction, hydrogen bonding and cation bridging effect. Aromatic, molecular weight, and hydrophilicity of both DOM and PAHs affected their binding with the interaction capability in the order of BKF > Bap > PHE and C3 > C5 > C2 > C1 > C4. Besides, alkaline environment and high DO condition was highly unsuitable for the combination. Scientific management and appropriate operating condition were important in optimizing operation performance and controlling pollutant migration in CWs.

Uptake, accumulation, and translocation of organophosphate esters and brominated flame retardants in water hyacinth (Eichhornia crassipes): A field study

Mechanisms underlying the plant uptake, accumulation, and translocation of organophosphate esters (OPEs) and brominated flame retardants (BFRs) in field environments remain ambiguous. To better understand these processes, we selected a typically polluted river with steady flow and rampant water hyacinth (Eichhornia crassipes) and investigated 25 OPEs and 23 BFRs in 24 sets of matched water-plant samples. Both OPEs and BFRs showed high or ultra-high levels in field water hyacinths, statistically positive water-plant/root concentration correlations, and dominant distributions in the roots. Passive root uptake was the dominant route for OPEs and BFRs to enter the water hyacinth. Both OPEs and BFRs in water hyacinth exhibited acropetal translocation from the root and possible basipetal translocation from the leaf. The accumulation and translocation of OPEs in water hyacinth were significantly affected by their substituents and structures, including the chlorination degree, alkyl chain length, side chain, and methylation degree of aryl-substituted OPEs. The translocation of BFRs in water hyacinth also showed close association with their bromination degree, but their accumulation in roots showed anomaly, indicating possible transformations. Overall, the enrichment and behavior of OPEs and BFRs in water hyacinth seemed to be mainly controlled by physicochemical parameters. OPE/BFR concentrations in total suspended particulate (TSP), TSP-associated organic carbon content, TSP concentration, and plant biomass all showed significant effects on their root accumulation and translocations in water hyacinth. This study provides rare field evidences and novel insights into the basipetal translocation of OPEs and BFRs in plants.

Enhancement of perfluorooctanoic acid and perfluorooctane sulphonic acid removal in constructed wetland using iron mineral: Performance and mechanisms

Polyfluoroalkyl substance (PFAS) pose a threat to the aquatic environment due to their environmental persistence. The removal of PFAS using constructed wetlands (CWs) has received interest, but the adsorption saturation and limited removal capacity of the substrate is frequently challenging. To enhance the microbial degradation and performance of the substrate, different configurations of iron minerals were used as substrate to remove perfluorooctane sulphonic acid (PFOS) and perfluorooctanoic acid (PFOA) from CWs. The addition of iron minerals resulted in elimination of 57.2% and 63.9% of PFOS and PFOA in the effluent, respectively, which were 35.0% and 36.8% higher than that of control. Moreover, up to 85.4%, 86%, and 85.1% of NH₄⁺, NO₃^-, and phosphorus, respectively, was removed using iron minerals. The enhanced electron transfer in iron mineral-based CWs was confirmed by a 61.2% increase in cytochrome C reductase content and an increased Fe(III)/Fe(II) ratio. Microbial analysis showed that the proportions of microbes with PFAS removal capacity (e.g. Burkholderiae and Pseudomonas), and the key pathways of the TCA cycle and glycolysis were increased in iron mineral-based CW. Based on these findings, we conclude that supplementation with iron mineral could enhance PFOA and PFOS removal in CWs.

Occurrence and source of PAHs in Miankaleh International Wetland in Iran

We examined the occurrence and sources of 16 priority PAHs in the water and sediment samples of the Miankaleh Wetland (Coastal Biosphere Reserve), famous for harbouring huge flocks of migrating birds. The water and sediment samples collected from various locations were visualized and processed using a self-organizing map, positive matrix factorization and GIS. All the sediment samples, and >90% of the water samples, showed some degree of PAHs contamination. Higher PAH levels occur near the Chopoghi Channel, powerplants, sewage outfalls, and near fishing operations. Compared with previous study in this area, the PAHs concentration in the sediments of aquatic ecosystem of Miankaleh Wetland is increasing. The levels of PAH contamination seem too low to account for the mass deaths of migratory birds, and botulinus contamination seems the likely cause. Fugacity calculations show that the sediments act as a sink for PAHs. According to PMF and SOM analyses, three origins of PAHs were recognized: (i) fossil fuel and vehicular emissions with high-molecular weight PAHs (4-5 ring); (ii) municipal and industrial sewages characterized by low-molecular weight PAHs (2-3 ring) typical of petrogenic sources; and (iii) port activity characterized by prevalence of petrogenic influence and petroleum-related activities (combustion PAHs and low-molecular weight PAHs) consistent with port activity. This wetland needs serious attention because of continuous input of pollutants. The results and the methods used in this study may assist in improving coastal wetlands management.

An eco-sustainable approach towards heavy metals remediation by mangroves from the coastal environment: A critical review

Mangroves provide various ecosystem services, carbon sequestration, biodiversity depository, and livelihoods. They are most abundant in marine and coastal ecosystems and are threatened by toxic contaminants like heavy metals released from various anthropogenic activities. However, they have significant potential to survive in salt-driven environments and accumulate various pollutants. The adverse effects of heavy metals have been extensively studied and recognized as toxic to mangrove species. This study sheds light on the dynamics of heavy metal levels, their absorption, accumulation and transport in the soil environment in a mangrove ecosystem. The article also focuses on the potential of mangrove species to remove heavy metals from marine and coastal environments. This review concludes that mangroves are potential candidates to clean up contaminated water, soil, and sediments through their phytoremediation ability. The accumulation of toxic heavy metals by mangroves is mainly through roots with limited upward translocation. Therefore, promoting the maintenance of biodiversity and stability in the coastal environment is recommended as an environmentally friendly and potentially cost-effective approach.

Enhanced benzofluoranthrene removal in constructed wetlands with iron- modified biochar: Mediated by dissolved organic matter and microbial response

Polycyclic aromatic hydrocarbons (PAHs) pose a high risk to ecosystems owing to their adverse environmental effects. The use of biochar in constructed wetlands (CWs) to remove PAH has received increased interest, but is frequently challenging because of saturation adsorption. To enhance the microbial degradation, electron acceptors are provided. This study aimed to remove a representative PAH, benzofluoranthrene (BbF), using iron-modified biochar as a supplement to the CW substrate. Results revealed that iron-mediated biochar based CWs increased the removal of BbF by 20.4 % and ammonium by 25.6 %. The BbF retained in substrate with biochar (36.6 % higher content) and further removed with iron modification (40.6 % lower content). Iron-modified biochar increased dissolved organic carbon content, particularly low-aromaticity, and low-molecular-weight organic matters (25.7 % higher tryptophan-like material), which contributed to PAH degradation by microorganisms. Microbial analysis confirmed that iron-mediated biochar enriched the abundance of microbes (e.g., Cellulomonas, Actinotalea, and Sphingomonas) and key enzymes (e.g., catA, lipV, and sdhA) that are involved in PAH degradation. Higher proportion of iron-reducing bacteria (e. g., Thiobacillus, Rhodobacter) played a significant role in driving microbial iron cycle, which was beneficial for PAHs removal. Based on the results, we confirmed that the use of iron-modified biochar in CWs enhance PAH removal.

Mn oxides enhanced pyrene removal with both rhizosphere and non-rhizosphere microorganisms in subsurface flow constructed wetlands

The polycyclic aromatic hydrocarbons (PAHs) are substantial wastewater pollutants emitted mostly by petroleum refineries and petrochemical industries, and their environmental fate has been of increasing concern among the public. Consequently, subsurface flow constructed wetlands (SFCWs) filled with Mn oxides (W-CW) or without Mn oxides (K-CW) were established to investigate the performance and mechanisms of pyrene (PYR) removal. The average removal rates of PYR in W-CW and K-CW were 96.00% and 92.33%, respectively. The PYR removal via other pathways (microbial degradation, photolysis, volatilisation, etc.) occupied a sizeable proportion, while the total PYR content in K-CW plant roots was significantly higher than that of W-CW. The microorganisms on the root surface and rhizosphere played an important role in PYR degradation in W-CW and K-CW and were higher in W-CW than that in K-CW in all matrix zones. The microorganisms between the 10-16 cm zone from the bottom of W-CW filled with Mn oxides (W-16) were positively correlated with PYR-degrading microorganisms, aerobic bacteria and facultative anaerobes, whereas K-16 without birnessite-coated sand was negatively correlated with these microorganisms.

Determination of 31 Polycyclic Aromatic Hydrocarbons in Plant Leaves Using Internal Standard Method with Ultrasonic Extraction-Gas Chromatography-Mass Spectrometry

The method for the determination of 16 priority polycyclic aromatic hydrocarbons (PAHs) in plant leaves has been studied extensively, yet the quantitativemethod for measuring non-priority PAHs in plant leaves is limited. A method for the simultaneous determination of 31 polycyclic aromatic hydrocarbons (PAHs) in plant leaves was established using an ultrasonic extraction-gas chromatography-mass spectrometry-internal standard method. The samples of plant leaves were extracted with ultrasonic extraction and purified with solid-phase extraction columns. The PAHs were separated by using gas chromatography-mass spectrometry equipped with a DB-EUPAH capillary column (20 m × 0.18 mm × 0.14 μm) with a selective ion monitoring (SIM) detection mode, and quantified with an internal standard. The method had good linearity in the range of 0.005~1.0 μg/mL with correlation coefficients greater than 0.99, and the method detection limit and maximum quantitative detection limit were in the ranges of 0.2~0.7 μg/kg and 0.8~2.8 μg/kg, respectively. The method was verified with spiked recovery experiments. The average spiked recovery ranged from 71.0% to 97.6% and relative standard deviations (n = 6) were less than 14%. Herein, we established a quantitativemethod for the simultaneous determination of priority and non-priority PAHs in plant leaves using GC-MS. The method is highly sensitive and qualitatively accurate, and it is suitable for the determination of PAHs in plant leaves.

Evaluation of the ecological impacts of short- and long-chain perfluoroalkyl acids on constructed wetland systems: Perfluorobutyric acid and perfluorooctanoic acid

Perfluoroalkyl substances (PFASs) contamination of aquatic system has attracted widespread attention in recent years. From both plant and microbial perspectives, the ecological risk of CWs by comparing PFASs with different chain lengths have not been fully understood. In this study, the influences of perfluorobutyric acid (PFBA) and perfluorooctanoic acid (PFOA) as typical of short- and long-chains on the ecological effect of CWs have been specifically studied. The results showed that plants produced oxidative stress response and the activities of superoxide dismutase (SOD) and peroxidase (POD) in leaves were stimulated by 17.23-28.13% and 10.49-14.17% upon 10 mg/L PFBA and PFOA exposure. Under the high level of PFBA and PFOA stress, the chlorophyll content was reduced by 15.20-39.40% and lipid peroxidation was observed in leaves with the accumulation of malondialdehyde (MDA) at 1.20-1.22 times of the control. Dehydrogenase (DHA) exhibited the most sensitivity in the presence of PFBA and PFOA with an inhibition ratio of over 90%. The biotoxicity of PFOA was higher than that of PFBA in terms of the inhibition degree of several substrate enzymes. The information of Illumina Miseq sequencing indicated that the diversity and structure of microbial community in CWs were significantly altered by PFBA and PFOA addition and led to an enrichment of more PFASs-tolerant bacteria.

Uptake, translocation, and metabolism of anthracene in tea plants

The origin of 9, 10-anthraquinone (AQ) contamination in tea remains unclear at present. The objective of this study was to test the hypothesis that AQ could be produced from the precursor anthracene in tea plantations. To test this hypothesis, the uptake, translocation, and transformation of anthracene in tea (Camellia sinensis) seedlings using hydroponic experimentation was investigated. Anthracene concentrations in tea tissues rose with increased anthracene exposure, which in the roots were significantly (p < 0.05) higher than those in aboveground parts at the end of the exposure. These results indicated that anthracene tended to be adsorbed into tea seedling via the roots and accumulated largely within roots. The three main pathways of anthracene degradation in tea seedlings were suggested: oxygen was incorporated in the 9^th and 10^th positions of anthracene resulting in AQ (I) and anthrone (II), and naphthalene was formed by ring fission of anthracene via methylanthracene (III). The principal anthracene metabolites were AQ and anthrone. The concentrations of AQ, like anthrone, were markedly elevated in the roots than those in stems throughout the entire exposure period. Moreover, the translocation factors for anthracene and its primary metabolites AQ and anthrone from roots to stems were persistently lower than 0.1, demonstrating a poor translocation from roots to the aboveground regions. However, tea seedlings could take anthracene up from water and translocate it to the leaves. It was a possible risk for AQ contamination in tea leaves continuously exposed to anthracene for long periods of time because tea plants were perennial crops.

Simultaneously enhanced removal of PAHs and nitrogen driven by Fe2+/Fe3+ cycle in constructed wetland through automatic tidal operation

The lack of dissolved oxygen and weak substrate removal capacity in constructed wetlands (CW) leads to terrible removal of nitrogen and polycyclic aromatic hydrocarbons (PAHs). In this study, automatic tidal flow CW microcosms were constructed by improving the oxygen environment (siphon and air-duct) and substrate (magnetite) to enhance purification performance and the mechanism was explored. The results showed that the addition of air-duct could improve the oxygen collection and thus improved the NH₄⁺ removal efficiency. Additionally, nitrogen removal was improved greatly due to the simultaneous nitrification and denitrification in aerobic layer with the addition of magnetite. Mass balance indicated the microbial degradation dominated (32-62%) the removal of PAHs. Metagenomic analysis proved the existence of magnetite enhanced the number of PAHs-degrading bacteria, functional groups and metabolic pathways and thus greatly improved the microbial degradation of PAHs. Furthermore, Fe²⁺/Fe³⁺ cycle played an important role in promoting the anaerobic degradation of PAHs, which might be served as an electron conduit to establish the direct interspecies electron transfer between iron-reducing bacteria (e.g. Deltaproteobacteria bacterium) and Anaerolineae bacterium to degrade PAHs efficiently. This study provided better understanding of the simultaneous removal of PAHs and nitrogen in tidal flow CWs.

Oxygenated polycyclic aromatic hydrocarbons in the surface water environment: Occurrence, ecotoxicity, and sources

Oxygenated polycyclic aromatic hydrocarbons (OPAHs) have been ubiquitously detected in atmospheric, soil, sediment, and water environments, some of which show higher concentrations and toxicities than the parent polycyclic aromatic hydrocarbons (PAHs). The occurrence, source, fate, risks and methods of analysis for OPAHs in the atmosphere, soil, and the whole environment (comprising the atmosphere, soil, water, and biota) have been reviewed, but reviews focusing on OPAHs in the water environment have been lacking. Due to the higher polarity and water solubility of OPAHs than PAHs, OPAHs exist preferentially in water environments. In this review, the occurrence, ecological toxicity and source of OPAHs in surface water environments are investigated in detail. Most OPAHs show higher concentrations than the corresponding PAHs in surface water environments. OPAHs pose non-ignorable ecological risks to surface water ecosystems. Wastewater treatment plant effluent, atmospheric deposition, surface runoff, photochemical and microbiological transformation, and sediment release are possible sources for OPAHs in surface water. This review will fill important knowledge gaps on the migration and transformation of typical OPAHs in multiple media and their environmental impact on surface water environments. Further studies on OPAHs in the surface environment, including their ecotoxicity with the co-existing PAHs and mass flows of OPAHs from atmospheric deposition, surface runoff, transformation from PAHs, and sediment release, are also encouraged.

The Partial Contribution of Constructed Wetland Components (Roots, Gravel, Microorganisms) in the Removal of Phenols: A Mini Review

Constructed wetlands (CW) have attracted growing interest in wastewater treatment research in the last 20 years, and have been investigated intensively worldwide. Many of the basic processes occurring in CWs have been qualitatively established; however, much quantitative knowledge is still lacking. In this mini review, the proportionate contributions of the different system components to removal of contaminants are examined. The main objective of this mini review is to provide a more in-depth assessment of the interactions between the porous bed, plants, and microorganisms during the removal of organic contaminants from the water in a subsurface flow CW system. In addition, a unique technique to study the partial contribution to the total removal of contaminants in a CW is described. Future studies in this field will expand our knowledge of any synergistic or antagonistic interactions between the components and facilitate improved CW construction and operation. Here, phenol will be used as a model industrial organic contaminant to illustrate our current understanding of the contributions of the different components to total removal. I will also discuss the various factors influencing the efficacy of bacteria, whether planktonic or as biofilm (on porous bed or plant roots), in subsurface flow CWs.

Dynamic Adsorption Characteristics of Phosphorus Using MBCQ

Biochar is a new type of adsorption material with excellent performance, but it has some problems, such as light texture, poor sedimentation, and difficult recovery, which limits its practical application. In this study, biochar microspheres (MBCQ) were prepared by the sol–gel method using powdery biochar from Hydrocotyle vulgaris as raw material and sodium alginate as a granular carrier. Experiments were performed to investigate the dynamic adsorption characteristics of phosphorus by MBCQ in the adsorption column and the influences of particle size, initial phosphorus concentration, flow rate, and column height on the breakthrough curve. The results showed that the static adsorption properties of different particles varied and that 3-millimeter particles were optimal. The breakthrough time positively correlated with column height and negatively correlated with initial phosphorus concentration, flow rate, and particle size. Flow velocity significantly impacted breakthrough time and length of mass transfer. The bed depth/service time model accurately predicted the relationship between breakthrough times and column heights. When ct/c0 = 0.6, the average relative deviation between predicted and measured values was the lowest. The Thomas model described the MBCQ adsorption process of Ph (R2 > 0.95), which indicated that diffusion in MBCQ adsorption was not a rate-limiting step.

Removal of p-toluenesulfonic acid from wastewater using a filtration-enhanced electro-Fenton reactor

A filtration-enhanced electro-Fenton reactor was developed for the removal of p-toluenesulfonic acid from wastewater.

Impact of sewer overflow on public health: A comprehensive scientometric analysis and systematic review

Sewer overflow (SO), which has attracted global attention, poses serious threat to public health and ecosystem. SO impacts public health via consumption of contaminated drinking water, aerosolization of pathogens, food-chain transmission, and direct contact with fecally-polluted rivers and beach sediments during recreation. However, no study has attempted to map the linkage between SO and public health including Covid-19 using scientometric analysis and systematic review of literature. Results showed that only few countries were actively involved in SO research in relation to public health. Furthermore, there are renewed calls to scale up environmental surveillance to safeguard public health. To safeguard public health, it is important for public health authorities to optimize water and wastewater treatment plants and improve building ventilation and plumbing systems to minimize pathogen transmission within buildings and transportation systems. In addition, health authorities should formulate appropriate policies that can enhance environmental surveillance and facilitate real-time monitoring of sewer overflow. Increased public awareness on strict personal hygiene and point-of-use-water-treatment such as boiling drinking water will go a long way to safeguard public health. Ecotoxicological studies and health risk assessment of exposure to pathogens via different transmission routes is also required to appropriately inform the use of lockdowns, minimize their socio-economic impact and guide evidence-based welfare/social policy interventions. Soft infrastructures, optimized sewer maintenance and prescreening of sewer overflow are recommended to reduce stormwater burden on wastewater treatment plant, curtail pathogen transmission and marine plastic pollution. Comprehensive, integrated surveillance and global collaborative efforts are important to curtail on-going Covid-19 pandemic and improve resilience against future pandemics.

Determination of Polycyclic Aromatic Hydrocarbons in Batman River by Liquid-liquid and Solid-phase Extractions and the Statistical Comparison of the Two Extraction Techniques

Polycyclic Aromatic Hydrocarbons (PAHs), which have detrimental health effects such as cancer and mutation, abound in rivers. To employ effective mitigation strategies, accurate determination of PAHs in water bodies is essential. In this study, PAHs in the Batman River were investigated. Specifically, the study has two aims: (1) determining whether there are any statistical differences between the Liquid-liquid (LL) and Solid-phase (SP) extraction techniques of PAHs; and (2) investigation of PAH contamination and the potential sources of PAHs in the Batman River. Methodologically, four different samples were collected and one part of each sample was extracted with the LL and the other part with the SP. Later, each extract was analyzed using gas chromatography-mass spectrometry. Subsequently, the analysis results of the LL and SP extracts were statistically compared. PAH concentrations were 85.5 and 76.7 ng/L for the means of the LL and SP extracts, respectively. Based on the t-test, the differences between these two means were not significant (p-value=0.684 &gt; 0.05). Similarly, no statistical differences were observed between the analysis results of the LL and SP extracts for any individual PAHs. As for the source analysis, the results indicated that road vehicles and coal combustion were the possible sources of PAH contamination in the river. This study provides the first data set for PAH contamination in the Batman River.

Presence of polycyclic aromatic hydrocarbons among multi-media in a typical constructed wetland located in the coastal industrial zone, Tianjin, China: Occurrence characteristics, source apportionment and model simulation

In-depth understanding and accurately predicting the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs) in constructed wetlands (CWs) is extremely crucial for optimizing the CWs construction and strengthening the risk control. However, few studies have focused on the PAHs among sediment-water-plant and model simulation in CWs. In this study, sediment, surface water and reed samples were gathered and analyzed from a typical CW. The concentrations of 16 PAHs (Σ₁₆PAHs) in sediments, surface water and reeds ranged from 620 to 4277 μg/kg, 114 to 443 ng/L and 74.5 to 362 μg/kg, respectively. The coefficients of variation (CV) were calculated as 0.796, 0.431 and 0.473 for the above three media respectively, indicating that the spatial distribution variation was medium intensity. The fugacity fraction (ff) suggested that sediments might act as the secondary release source of most PAHs. According to the diagnostic ratios and principal component analysis-multiple linear regression (PCA-MLR), PAHs in this CW mainly come from fossil fuels combustion and petroleum leakage. PAHs in sediments showed high ecological risk at water inlet and moderate risk at the other functional zones, while low risks for surface water at all functional zones. Although the human health risk assessment indicated relatively low cancer risk, the health risk still cannot be ignored with the continuous input and accumulation of exogenous PAHs. A mathematical model covering the hydraulics parameters and composition characteristics of the wetland was established, and its reliability was verified. The simulated results obtained by the established model were basically consistent with the measured values. In addition, the total remove efficiency of PAHs in surface water was 40.2%, which calculated by the simulated model. This work provides helpful insight into the comprehension of occurrence and fate of PAHs among multi-media in CWs.

Exploring the optimization of aerobic food waste digestion efficiency through the engineering of functional biofilm Bio-carriers

The possibility of breaking down cellulose-rich food waste through biofilm engineering was investigated. Six previously isolated strains from naturally degrading fruits and vegetables, screened for biofilm-forming ability and cellulolytic activity, were selected to enrich a biocarrier seeding microbial consortium. The food waste model used in this study was cabbage which was aerobically digested under repeated water rinsing and regular effluent drainage. The engineered biocarrier biofilm's functionality was evaluated by tracing microbial succession following metagenomic sequencing, quantitative PCR, scanning electron microscopy, and cellulolytic activity before and after the digestion processes. The engineered microbial consortium demonstrated superior biofilm-forming ability on biocarriers than the original microbial consortium and generally displayed a higher cellulolytic activity. The presented study provides one of the few studies of food waste aerobic digestion using engineered biofilms. Insights presented in this study could help further optimize aerobic food waste digestion.

Construction of a novel microbial consortium valued for the effective degradation and detoxification of creosote-treated sawdust along with enhanced methane production

Lignocellulosic biomass represents an unlimited and ubiquitous energy source, which can effectively address current global challenges, including climate change, greenhouse gas emissions, and increased energy demand. However, lignocellulose recalcitrance hinders microbial degradation, especially in case of contaminated materials such as creosote (CRO)-treated wood, which necessitates appropriate processing in order to eliminate pollution. This study might be the first to explore a novel bacterial consortium SST-4, for decomposing birchwood sawdust, capable of concurrently degrading lignocellulose and CRO compounds. Afterwards, SST-4 which stands for molecularly identified bacterial strains Acinetobacter calcoaceticus BSW-11, Shewanella putrefaciens BSW-18, Bacillus cereus BSW-23, and Novosphingobium taihuense BSW-25 was evaluated in terms of biological sawdust pre-treatment, resulting in effective lignocellulose degradation and 100% removal of phenol and naphthalene. Subsequently, the maximum biogas production observed was 18.7 L/kg VS, while cumulative methane production was 162.8 L/kg VS, compared to 88.5 without microbial pre-treatment. The cumulative energy production from AD-I and AD-II through biomethanation was calculated as 3177.1 and 5843.6 KJ/kg, respectively. The pretreatment process exhibited a significant increase in the energy yield by 83.9%. Lastly, effective CRO detoxification was achieved with EC₅₀ values exceeding 90%, showing the potential for an integrated process of effective contaminated wood management and bioenergy production.