Distribution and transport of microplastics in the upper 1150 m of the water column at the Eastern North Atlantic Subtropical Gyre, Canary Islands, Spain

Does the microplastics ingestion patterns and polymer composition vary across the oceanic zones? A case study from the Indian coast

This study explores microplastic (MP) presence in the gastrointestinal tracts of deep-sea fish from the Central Indian Ocean, off the Indian coast. Among the 27 species examined, 19 showed MP contamination, averaging 2.68 ± 0.30 (±SE) MPs per individual. Polymer analysis via FTIR and micro-Raman identified several types, including polyethylene terephthalate (PET), polyvinyl alcohol (PVA), polypropelene (PP), polyvinyl acetate (PVC), polyurethane (PU), polytetrafluoroethylene (PTFE), polyaniline (PANI), polymethyl methacrylate (PMMA), and polyethersulfone (PES), with PET being the most prevalent (33.33 %). MP ingestion was higher in benthopelagic fish and those at higher trophic levels, as indicated by comparisons across oceanic zones. Niche partitioning analysis suggests feeding behaviour as a primary influencer of MP ingestion in deep-sea fish rather than habitat or trophic level. The study proposes the potential use of deep-sea fish as indicators for assessing microplastic pollution across oceanic zones and deep-sea regions through bycatch monitoring.

Beneath the water column: Uncovering microplastic pollution in the sublittoral coastal sediments of the Canary Islands, Spain

Marine ecosystems pollution by microplastics (MPs) is a global problem of special concern. The present study examines the prevalence and distribution of MPs and cellulosic particles in sublittoral coastal sediments of the Canary Islands archipelago (Spain). At twenty-six different locations alongside seven islands, three samples were taken parallel to the shoreline between 1 and 10 m depth (n = 78). Sediment samples were primarily digested with a H2O2 solution followed by four flotations in a saturated NaCl solution. The mean concentration obtained was 3.9 ± 1.6 items/g of dry weight. A similar distribution pattern was observed across all islands concerning particles morphology, color, size and composition: mainly colorless/translucent and blue fibers (60.0%). Additionally, fragments were also found, and to a much lesser extent microbeads, films and tangled messes. MicroFourier Transform Infrared spectroscopy analysis of 12.5% of the fibers, showed that they were mainly cellulosic (54.5%) -either natural or semisynthetic- followed by polyester (22.7%) and acrylic (4.5%). The potential correlation between particle distribution in nearshore sediments and wave intensity was also explored. This work provides the first comprehensive report on the current MPs content of the seabed of the region.

Does water column stratification influence the vertical distribution of microplastics?

Microplastic pollution has been confirmed in all marine compartments. However, information on the sub-surface microplastics (MPs) abundance is still limited. The vertical distribution of MPs can be influenced by water column stratification due to water masses of contrasting density. In this study, we investigated the vertical distribution of MPs in relation to the water column structure at nine sites in the Kattegat/Skagerrak (Denmark) in October 2020.A CTD was used to determine the stratification and pycnocline depth before sampling. Plastic-free pump-filter sampling devices were used to collect MPs from water samples (1-3 m3) at different depths. MPs concentration (MPs m-3) ranged from 18 to 87 MP m-3 (Median: 40 MP m-3; n = 9) in surface waters. In the mid waters, concentrations ranged from 16 to 157 MP m-3 (Median: 31 MP m-3; n = 6), while at deeper depths, concentrations ranged from 13 to 95 MP m-3 (Median: 34 MP m-3; n = 9). There was no significant difference in the concentration of MPs between depths. Regardless of the depth, polyester (47%), polypropylene (24%), polyethylene (10%), and polystyrene (9%) were the dominating polymers. Approximately 94% of the MPs fell within the size range of 11-300 μm across all depths. High-density polymers accounted for 68% of the MPs, while low-density polymers accounted for 32% at all depths. Overall, our results show that MPs are ubiquitous in the water column from surface to deep waters; we did not find any impact of water density on the depth distribution of MPs despite the strong water stratification in the Kattegat/Skagerrak.

Microplastic enrichment capacity of Ctenochaetus striatus from the habitat environment - An example in Xisha, South China Sea

Microplastic pollution is a widespread concern in the global marine environment. In this study, microplastic pollution status in Xisha waters was investigated. Microplastics were found in all seawater samples, and 90.76 % of C. striatus samples were detected with microplastics. The average abundance of microplastics in seawater samples was 0.64 ± 0.39 items/L, and the abundance of microplastics in the gills and gastrointestinal tracts (GITs)of C. striatus was 1.14 ± 0.41 items/L and 1.80 ± 0.49 items/L, respectively. Shapes of microplastics in the seawater and in the gills and GITs of C. striatus were mainly fibers and films, and the majority of the particle sizes being <1 mm, and the polymers were mainly PET. In addition, the abundance of microplastics in the gills and GITs of C. striatus was positively correlated with that in the seawater, and the correlation was higher in the gills than in the GITs, which means that the accumulation of microplastics in the gills was more closely related to their habitats. The positive correlation between microplastic abundance in the gills and GITs of C. striatus and its body size may be due to the fact that larger individuals have greater energetic demands, require more energy requirements, consume more food, and thus increase the chances of ingesting microplastics.

Quantification and characterization of microplastics in surface water samples from the Northeast Atlantic Ocean using laser direct infrared imaging

15 filtration samples were collected at eight locations onboard the RV Sonne (cruise SO279 in 2020) from 6 m water depth using a fractionated stainless-steel filtration unit. The size fraction > 300 μm was visually examined and potential microplastic particles were analyzed by ATR-FTIR spectroscopy. The treatment of size class 20 μm < d < 300 μm was based on enzymatic-oxidative microwave-assisted "one-pot" matrix digestion in conjunction with analysis of the microplastics by time-efficient LDIR imaging. Total number concentrations ranged from 47 to 2154 microplastic particles per m³ (average for all stations: 500 ± 700 microplastic particles m^-3 (1 SD; n = 8)). In total, 20 polymer types were identified. The most common polymer types were polyethylene terephthalate (20 %) and acrylates/polyurethane/varnish (15 %). 93 % of the detected microplastics were smaller than 100 μm in length. Analysis of sample replicates indicates high spatio-temporal variations in microplastic pollution within the investigated region.

Recent trends on microplastics abundance and risk assessment in coastal Antarctica: Regional meta-analysis

We investigated sources, abundance and risk of microplastics (MPs) in water, sediments and biota around Antarctica. The concentration of MPs in Southern Ocean (SO) ranged from 0 to 0.56 items/m³ (mean = 0.01 items/m³) and 0-1.96 items/m³ (mean = 0.13 items/m³) in surface and sub-surface water. The distribution of fibers in water was 50%, sediments were 61%, and biota had 43%, which were followed by fragments in the water (42%), sediments (26%), and biota (28%). Shapes of film had lowest concentrations in water (2%), sediments 13%), and biota (3%). Ship traffic, drift of MPs by currents, and untreated waste water discharge contributed to the variety of MPs. The degree of pollution in all matrices was evaluated using the pollution load index (PLI), polymer hazard index (PHI), and potential ecological risk index (PERI). PLI at about 90.3% of locations were at category I followed by 5.9% at category II, 1.6% at category III, and 2.2% at category IV. Average PLI for water (3.14), sediments (6.6), and biota (2.72) had low pollution load (<10). Mean PHI for water, sediments, and biota showed hazards level V with a higher percentage of 84.6% (>1000) and 63.9% (PHI:0-1) in sediments and water, respectively. PERI for water showed 63.9% minor risk, and 36.1% extreme risk. Around 84.6% of sediments were at extreme risk, 7.7% faced minor risk, and 7.7% were at high risk. While 20% of marine organisms living in cold environments experienced minor risk, 20% were in high risk, and 60% were in extreme risk. Highest PERI was found in the water, sediments, and biota in Ross Sea, due to high hazardous polymer composition of polyvinylchloride (PVC) in the water and sediments due to human activity, particularly use of personnel care products and waste water discharge from research stations.

The factors influencing the vertical transport of microplastics in marine environment: A review

There have been numerous studies that have identified the presence of low-density microplastics (MPs) in the water column and sediments. The focus of current MPs research has shifted towards the interaction of MPs with marine organisms and their potential hazards, including the uptake characteristics, biological transport and toxicological effects of MPs, but the processes involved in the deposition behavior of MPs are still poorly understood. In this review, we summarize the current state of knowledge on the vertical transport of MPs influenced by their physicochemical properties and marine organisms, and discuss their potential impact on MPs deposition. The physicochemical properties of MPs determine their initial distribution. The density, shape, and size of MPs influence their settling state in the marine environment. Marine biota play a key role in the transport of MPs to deep marine environment, mainly by changing the density and adsorption of MPs. Biofouling can alter the surface properties of MPs and increase the overall density, thus affecting the vertical flux of the plastic. Macroalgae may trap MPs particles by producing chemicals or by using electrostatic interactions. Marine swimming organisms ingest MPs and excrete them encapsulated in fecal particles, while the activity of marine benthic organisms may contribute to the transfer of MPs from surface sediments to deeper layers. In addition, MPs may be incorporated into organic particles produced by marine organisms such as marine snow or marine aggregates, increasing the vertical flux of MPs. However, due to the complexity of different sea areas and MPs properties, the deposition behavior of MPs may be the result of the interaction of multiple factors. Thus, the effects of MPs properties, marine organisms and the natural environment on MPs deposition in marine environment needs further research to fill this gap.

Influencing factors for microplastic intake in abundant deep-sea lanternfishes (Myctophidae)

Plastic debris is ubiquitous in the hydrosphere. Yet, we lack an understanding of contamination among deep-sea species and primarily how each trait can influence microplastic intake. We investigated microplastic contamination in the digestive tract of hyper-abundant mesopelagic lanternfishes (n = 364 individuals) from the Southwestern Tropical Atlantic, captured from 90 to 1000 m depth. Overall, microplastics were detected in most individuals analysed (frequency of occurrence = 68 %). Large microplastics, mostly of a filamentous shape were the most frequent, followed by smaller fragments and foams. Microplastics made of high-density polymers (PET, PVC, PA, SBR rubber) were more prevalent than low-density ones (PE, EVA and PBD rubber), especially under deeper layers. Larger microplastics were detected in lanternfishes captured off the northeastern Brazilian coast (mean 0.88 ± SE 0.06 mm) compared to those from around the Rocas Atoll and Fernando de Noronha Archipelago (0.70 ± 0.07 mm; p≤ 0.05), ∼350 km from the continent. Moreover, lanternfishes that migrate from the upper mesopelagic (200-500 m) to the epipelagic layers (<200 m) had simultaneously the highest intake and the smallest particles (1.65 ± 0.17 particles individual^-1 and 0.55 ± 0.07 mm; p≤ 0.05). Biological mediated transport of microplastics from the epipelagic to the mesopelagic waters was evinced, but fishes foraging in shallower layers had the lowest intake (1.11 ± 0.10 part. ind.^-1; p≤ 0.05). Furthermore, the jaw length was positively associated with an increment in microplastic intake (Incidence Rate Ratio = 1.1; p≤ 0.05). The lanternfishes that preferably prey upon fish larvae are more prone to microplastic intake than their counterparts, which forage mostly on crustaceans and gelatinous zooplankton (p≤ 0.05).

Influence of waves on the three-dimensional distribution of plastic in the ocean

The world's oceans are facing plastic pollution, 80 % of which of terrestrial origin flowing from the mismanaged waste of coastal populations and from river discharge. To study the fate of this pollution, the three-dimensional trajectories of neutral plastic particles continuously released for 24 years according to realistic source scenarios are computed using currents from a global ocean-wave coupled model at 14^∘ resolution and from a reference ocean-only model. These Lagrangian simulations show that neutral particles accumulate at the surface in the subtropical convergence zones from where they penetrate to about 250 m depth and strongly disperse over 40^∘ of latitude. About 5.3 % of the particles remain at the surface with the wave-coupled model currents, whereas only 2 % for the uncoupled model, with some modulation in the location of the convergence zones. Increased surface retention results from upward vertical velocities induced by widespread divergence of waves-induced Stokes transport in the surface layers.

Microplastic contamination in seawater across global marine protected areas boundaries

Despite the relatively rich literature on the omnipresence of microplastics in marine environments, the current status and ecological impacts of microplastics on global Marine Protected Areas (MPAs) are still unknown. Their ubiquitous occurrence, increasing volume, and ecotoxicological effects have made microplastic an emerging marine pollutant. Given the critical conservation roles of MPAs that aim to protect vulnerable marine species, biodiversity, and resources, it is essential to have a comprehensive overview of the occurrence, abundance, distribution, and characteristics of microplastics in MPAs including their buffer zones. Here, extensive data were collected and screened based on 1565 peer-reviewed literature from 2017 to 2020, and a GIS-based approach was applied to improve the outcomes by considering boundary limits. Microplastics in seawater samples were verified within the boundaries of 52 MPAs; after including the buffer zones, 1/3 more (68 MPAs) were identified as contaminated by microplastics. A large range of microplastic levels in MPAs was summarized based on water volume (0-809,000 items/m³) or surface water area (21.3-1,650,000,000 items/km²), which was likely due to discrepancy in sampling and analytical methods. Fragment was the most frequently observed shape and fiber was the most abundant shape. PE and PP were the most common and also most abundant polymer types. Overall, 2/3 of available data reported that seawater microplastic levels in MPAs were higher than 12,429 items/km², indicating that global MPAs alone cannot protect against microplastic pollution. The current limitations and future directions were also discussed toward the post-2020 Global Biodiversity Framework goals.

Synthetic microplastic abundance and composition along a longitudinal gradient traversing the subtropical gyre in the North Atlantic Ocean

Plastic pollution has been reported in the North Atlantic Ocean since the 1970s, yet limited data over subsequent decades pose challenges when assessing spatio-temporal trends in relation to global leakages and intervention strategies. This study quantified microplastics within the upper ocean along a longitudinal transect of the North Atlantic and its subtropical gyre. Microplastics were sampled from surface and subsurface (-25 m) water using a manta trawl and NIKSIN bottle respectively. The surface water polymer community varied significantly between geographic positions ('inshore', 'gyre', 'open ocean'), and was significantly influenced by fragment quantity. Compared to other positions, the North Atlantic gyre was associated with high concentrations of polyethylene, polypropylene, acrylic and polyamide fragments. Subsurface water was dominated by polyamide and polyester fibres. Backtracked 2-year Lagrangian simulations illustrated connectivity patterns. Continued monitoring of microplastics throughout the water column of the North Atlantic Ocean is required to address knowledge gaps and assess spatio-temporal trends.

Anthropogenic microfibers are highly abundant at the Burdwood Bank seamount, a protected sub-Antarctic environment in the Southwestern Atlantic Ocean

Microplastics debris in the marine environment have been widely studied across the globe. Within these particles, the most abundant and prevalent type in the oceans are anthropogenic microfibers (MFs), although they have been historically overlooked mostly due to methodological constraints. MFs are currently considered omnipresent in natural environments, however, contrary to the Northern Hemisphere, data on their abundance and distribution in Southern Oceans ecosystems are still scarce, in particular for sub-Antarctic regions. Using Niskin bottles we've explored microfibers abundance and distribution in the water column (3-2450 m depth) at the Burdwood Bank (BB), a seamount located at the southern extreme of the Patagonian shelf, in the Southwestern Atlantic Ocean. The MFs detected from filtered water samples were photographed and measured using ImageJ software, to estimate length, width, and the projected surface area of each particle. Our results indicate that small pieces of fibers are widespread in the water column at the BB (mean of 17.4 ± 12.6 MFs.L^-1), from which, 10.6 ± 5.3 MFs.L^-1 were at the surface (3-10 m depth), 20 ± 9 MFs.L^-1 in intermediate waters (41-97 m), 24.6 ± 17.3 MFs.L^-1 in deeper waters (102-164 m), and 9.2 ± 5.3 MFs.L^-1 within the slope break of the seamount. Approximately 76.1% of the MFs were composed of Polyethylene terephthalate, and the abundance was dominated by the size fraction from 0.1 to 0.3 mm of length. Given the high relative abundance of small and aged MFs, and the oceanographic complexity of the study area, we postulate that MFs are most likely transported to the BB via the Antarctic Circumpolar Current. Our findings imply that this sub-Antarctic protected ecosystem is highly exposed to microplastic pollution, and this threat could be spreading towards the highly productive waters, north of the study area.

Seasonal variation, polymer hazard risk and controlling factors of microplastics in beach sediments along the southeast coast of India

Microplastics (MPs) and its associated organic and inorganic contaminants are one among the significant health hazards to almost all biota, including human. We investigated the polymer hazard risk and its adsorbed contaminants in MPs at six prominent beaches of Chennai on the southeast coast of India. The spatial variation of MPs during the northeast (NE) monsoon (range: 76-720 items/kg, mean: 247.4 items/kg) was higher than that during southwest (SW) monsoon (range: 84-498 items/kg, mean: 302.7 items/kg). In both the seasons, polyethylene (PE) and polypropylene (PP) were the dominant polymers and fibre was the predominant shape of MPs, likely to be derived from fishing, textile and urban activities in this region. Scanning electron microscope (SEM) images exhibited various surface weathering features including grooves, cracks, fractures, adhering particles, pits, vermiculate textures and fibre reinforcements. Energy dispersive X-ray spectrometer (EDS) results showed that MPs have adsorbed major (Si, Al, Na, Mg, Ca, Fe and Ti) and trace (Cu, Cr, Ni, Pb and Zn) metals. Though pollution load index (PLI) presented low degree of MP contamination in the beach sediments, hazardous polymers such as polyvinyl chloride (PVC), polyamide (PA) and polystyrene (PS) contributed to high polymer hazard index (PHI) and potential ecological risk index (PERI), posing very high risk to the biota. The trajectories obtained from particle-tracking coupled with hydrodynamic simulation clearly showed that 20% of MPs settled along the coast and the remaining moved towards north, alongshore and offshore (∼50 km) within 30 days, and in NE monsoon due to current reversal, the floating debris and MPs have drifted towards south, ∼40 km in 30 days, indicating the role of circulation in the fate and transport pathways of plastic debris.

Effects of Biofilms and Particle Physical Properties on the Rising and Settling Velocities of Microplastic Fibers and Sheets

Vertical dynamics of microplastics (MPs) in the water column are complex and not fully understood due to the diversity of environmental MPs and the impact of weathering and biofouling on their dynamical properties. In this study, we investigate the effects of the particle properties and biofilm on the vertical (settling or rising) velocity of microplastic sheets and fibers under laboratory conditions. The experiments focus on three types of MPs (polyester PES fibers, polyethylene terephthalate PET sheets, and polypropylene PP sheets) of nine sizes and two degrees of biological colonization. Even though pristine PES fibers and PET sheets had a similar density, the sinking velocity of fibers was much smaller and independent of their length. The settling or rising velocity of sheets increased with the particle size up to a threshold and then decreased in the wake of horizontal oscillations in large particles. Biofilms had unexpected effects on vertical velocities. Irregular biofilm distributions can trigger motion instabilities that decrease settling velocities of sheets despite the increase in density. Biofilms can also modify the orientation of fibers, which may increase their settling velocity. Finally, we selected the most performant theoretical formulation for each type of particle and proposed modifications to consider the effect of biofilm distribution.

Bioaccumulation of additives and chemical contaminants from environmental microplastics in European seabass (Dicentrarchus labrax)

Marine microplastic pollution is one of the biggest environmental problems we face. The growth of plastic production has not ceased since the 1950s and it is currently estimated that 368 tons of plastic were produced in 2019 (PlascticsEurope, 2020). Geyer et al. (2017) estimate that 79% of the plastic produced in the world still remains in the environment; this plastic due to the effect of degradation and subsequent fragmentation, is present in the form of microplastics in all oceans and, due to its small size can be ingested by fish and filter-feeding organisms. In addition, microplastics have additives and chemical contaminants associated with them, and the potential effect of microplastic ingestion on marine organisms, and through them, the potential risk to humans, is unknown. In the present study, European seabass (Dicentrarchus labrax) were fed for 60 days with three treatments: Control (feed), MP (feed with 10% virgin microplastics) and EMP (feed with 10% environmental microplastics), being the first study to evaluate long-term accumulation of contaminants due to ingestion of environmental microplastics (EMP) in fish. Both plastic additives such as PBDEs, and chemical contaminants adsorbed from the environment such as PCBs and DDE, were analyzed in the EMP, feed and liver. The concentration of microplastics in the feed was calculated based on the MPs/zooplankton wet weight (WW) ratio of 0.1 found in an area of maximum accumulation in the Canary Islands. Therefore, it is an experiment that simulates real conditions, but in the worst-case scenario, using both, concentrations based on data obtained in oceanographic campaigns and microplastics collected from the environment. Our results show that in this scenario, additives and chemical contaminants adsorbed on EMPs bioaccumulate in fish liver due to long-term ingestion of microplastics.

Weathering indices of microplastics along marine and coastal sediments from the harbor of Cartagena (Spain) and its adjoining urban beach

Marine and coastal sediments from the harbor of Cartagena (Spain) and its adjoining beach were investigated regarding their microplastic burden. Fibers accounted for 47.62% and 61.66% in marine and coastal sediments, respectively, followed by films (31.43% and 18.76%) and fragments (20.95% and 18.65%). Polyvinyl (36.07%), polypropylene (21.31%), and polyethylene (18.03%) were isolated for marine sediments, and low-density polyethylene (40.71%), polypropylene (20.16%), and acrylate (11.37%) for coastal sediments. Highest concentrations were found in the deepest marine sediments (24.0 m) and in the furthest zone from the seashore for coastal sediments (18 m). Carbonyl index increased in the intermediate area (12.5 m) for marine sediments (0.51), whilst vinyl index was maximum for the deepest samples (1.94), reporting Norrish type I and II reactions, respectively. Coastal sediments collected close to the high tide line displayed the highest average values for both indices, 1.57 and 1.29, respectively, indicating a higher exposition to weathering variables.

Microplastic variability in subsurface water from the Arctic to Antarctica

Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm-5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m³ (ranging from 0 to 2.6 items/m³), with an equal average abundance for both fragments and fibers (0.34 items/m³). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7-7.5 μg/m³) than the North Atlantic and Siberian Arctic (0.6 μg/m³). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located.

Microplastic pollution in sublittoral coastal sediments of a North Atlantic island: The case of La Palma (Canary Islands, Spain)

In this work, the microplastic content of sediments collected in July 2020 between 5 and 7 m depth was studied in four locations of La Palma island (Canary Islands, Spain). At each sampling location, three samples were taken parallel to the shoreline. The microplastic content in each sampling corer was studied every 2.5 cm depth after digestion with a H₂O₂ solution followed by flotation in a saturated NaCl solution. Visualization of the final filtrates under a stereomicroscope revealed that all the sediment samples evaluated contained mostly microfibers (98.3%) which were mainly white/colorless (86.0%) and blue (9.8%), with an average length of 2423 ± 2235 (SD) mm and an average concentration of 2682 ± 827 items per kg of dry weight, being the total number of items found 1,019. Fourier Transform Infrared microscopy analysis of 13.9% (n = 139) of the microfibers also showed that they were mainly cellulosic (81.3%). No significant differences were found between the depths of the sediment. However, significant differences were found between the number of fibers from the sampling sites at the east and west of the island. Such variability could be driven by the winds and ocean mesoscale dynamics in the area. This study confirms the wide distribution of microfibers in sediments from an oceanic island like La Palma, providing their first report in marine sediments of the Canary Islands.