Fungal-induced CaCO3 and SrCO3 precipitation: a potential strategy for bioprotection of concrete

Properties and Behavior of Sandy Soils by a New Interpretation of MICP

Research on MICP technology for ground improvement began in the early 2000s, and since then, it has been considered as innovative research. The field of applications is showing signs of expanding from sandy soil stabilization to remediation. However, the research has not always progressed, because it is extremely difficult to evaluate the ability (viability rate) related to microorganisms and how to handle them quantitatively. In fact, this problem hinders the consensus of research results in terms of quantitative evaluation of microorganisms and the cross-comparison (evaluation) and use of MICP technology research. The crucial disadvantage of using bacteria is that their properties are not constant due to changes over time and in the surrounding environment. Therefore, for engineering purposes, we used the carbonate formation rate (CPR), instead of urease activity, as a function of the microbial mass (OD) with viable bacteria. Thus, the standard OD-CPR relationship was defined experimentally, and the estimation method of viability was established. The required amount of microorganisms for testing was given by OD*, and the relationship "OD = Rcv OD*" was defined to convert from OD* to OD. Rcv was defined as the viable bacterial rate. It was found that the Ca2+/OD ratio controls the inhibition behavior in MICP. At a Ca2+/OD ratio of >8.46 M, then inhibition occurs, while at Ca2+/OD = 8.46 M, CPR = 8.46 OD and the CPR is proportional to the viable OD, Rcv, and OD*. We show that it is possible to perform an experiment using OD* with aged bacteria, obtain Rcv from the standard OD-CPR and OD*-CPR relationships, convert OD* to OD and to perform a unified evaluation without actually determining the viability rate.

Investigating the potential of delignified rice husk as a carbon-rich resource for extracting glucose and its utilization in biocement production through fungal isolates

Burning rice straw is now a significant issue faced by different regions in India, as its burning releases harmful gases, mainly carbon dioxide. Various techniques are now in trend to utilize the rice straw, e.g., producing compressed natural gas using rice straw, bioethanol, etc., as a substrate for various microorganisms. A high quantity of non-utilized rice husk generates more ideas for its proper utilization. The cellulose, hemicellulose, and lignin found in rice straws can be a fungi growth medium. In this research, the delignification of rice husk is done by acid (2% and 4% H2SO4) and alkali (2% and 4% NaOH) at 121 °C at 103 kPa for 1 h to obtain crude carbon source which is further utilized for biomineralization. The glucose is subjected to qualitative and quantitative analysis using Molisch's and Dinitro salicylic tests. The delignification process showed a positive outcome when 2% H2SO4 is utilized maximum yield of 5.9 ug/ml free sugar concentration. Representing the highest glucose yield compared to the experiment's other acid and base substances used. Various techniques such as field emission-scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and Fourier transformed infra-red (FTIR) spectroscopy are employed to examine surface and chemical alterations. The 2% H2SO4 pretreated rice husk is utilized for microbial-induced calcite precipitation using fungal isolates S1 (3), S1 (18), and S4 (1). The calcite and vaterite produced by biomineralization are confirmed using XRD for fungal isolates namely, S1 (3), S1 (18), and S4 (1) having percentage crystallinity of 59%, 46.428%, and 62.69% percentage crystallinity respectively.

Advances in microbial self-healing concrete: A critical review of mechanisms, developments, and future directions

The self-healing bioconcrete, or bioconcrete as concrete containing microorganisms with self-healing capacities, presents a transformative strategy to extend the service life of concrete structures. This technology harnesses the biological capabilities of specific microorganisms, such as bacteria and fungi, which are integral to the material's capacity to autonomously mend cracks, thereby maintaining structural integrity. This review highlights the complex biochemical pathways these organisms utilize to produce healing compounds like calcium carbonate, and how environmental parameters, such as pH, temperature, oxygen, and moisture critically affect the repair efficacy. A comprehensive analysis of recently published peer-reviewed literature, and contemporary experimental research forms the backbone of this review with a focus on microbiological aspects of the self-healing process. The review assesses the challenges facing self-healing bioconcrete, including the longevity of microbial spores and the cost implications for large-scale implementation. Further, attention is given to potential research directions, such as investigating alternative biological agents and optimizing the concrete environment to support microbial activity. The culmination of this investigation is a call to action for integrating self-healing bioconcrete in construction on a broader scale, thereby realizing its potential to fortify infrastructure resilience and sustainability.

Long-term monitoring of the hypogeal Etruscan Tomba degli Scudi, Tarquinia, Italy. Early detection of black spots, investigation of fungal community, and evaluation of their biodeterioration potential

AIMS

Hypogeal environments with cultural heritage interest pose a real challenge for their preservation and conservation. The ancient Etruscan Necropolis of Tarquinia, Italy, consists of 200 tombs decorated with extraordinary mural paintings, of great artistic and historical value. Since the beginning of the restoration campaign in 2016, a regular microbiological survey has been performed in the Tomba degli Scudi. The aim of this study was to investigate the nature of an expansion of black spots on the pictorial layers recently observed.

METHODS AND RESULTS

To determine the origin of the black spots in the atrium chamber of the Tomba degli Scudi, the fungal community was sampled using various techniques: cellulose discs, swabs, and nylon membranes and investigated by a multi-analytical approach. The obtained results suggest that the identified fungal strains (e.g. Gliomastix murorum and Pseudogymnoascus pannorum) are common to many subterranean environments around the world, such as Lascaux cave.

CONCLUSIONS

The continuous and long-term monitoring made it possible to detect alterations at an early stage and assess the harmfulness of different fungal strains. This work is a demonstration of the effectiveness of prevention and monitoring actions within these fragile and valuable environments.

Fungal colonization and penetration of mortar as a suitable simulant for concrete: Implications for fungal biodeterioration in the built environment

A range of fungal species showed variable abilities to colonize and penetrate a mortar substrate. Calcium biomineralization was a common feature with calcium-containing crystals deposited in the microenvironment or encrusting hyphae, regardless of the specific mortar composition. Several species caused significant damage to the mortar surface, exhibiting burrowing and penetration, surface etching, and biomineralization. In some cases, extensive biomineralization of hyphae, probably by carbonatization, resulted in the formation of crystalline tubes after hyphal degradation on mortar blocks, including those amended with Co or Sr carbonate. Ca was the only metal detected in the biomineralized formations with Co or Sr undetectable. Aspergillus niger, Stemphylium sp. and Paecilomyces sp. could penetrate mortar with differential responses depending on the porosity. Fluorescent staining of thin sections recorded penetration depths of ∼530 um for A. niger and ∼620 um for Stemphylium sp. Penetration depth varied inversely with porosity and greater penetration depths were achieved in mortar with a lower porosity (lower water/cement ratio). These results have provided further understanding of biodeteriorative fungal interactions with cementitious substrates that can clearly affect structural integrity. The potential significance of fungal colonization and such biodeteriorative phenomena should not be overlooked in built environment contexts, including radionuclide storage and surface decontamination.

Cadmium biosorption and mechanism investigation using two cadmium-tolerant microorganisms isolated from rhizosphere soil of rice

Microbial remediation of cadmium-contaminated soil offers advantages like environmental friendliness, cost-effectiveness, and simple operation. However, the efficacy of this remediation process relies on obtaining dominant strains and a comprehensive understanding of their Cd adsorption mechanisms. This study identified two Cd-resistant bacteria, Burkholderia sp. 1-22 and Bacillus sp. 6-6, with significant growth-promoting effects from rice rhizosphere soil. The strains showed remarkable Cd resistance up to ∼200 mg/L and alleviated Cd toxicity by regulating pH and facilitating bacterial adsorption of Cd. FTIR analysis showed crucial surface functional groups, like carboxyl and amino groups, on bacteria played significant roles in Cd adsorption. The strains could induce CdCO3 formation via a microbially induced calcium precipitation (MICP) mechanism, confirmed by SEM-EDS, X-ray analysis, and elemental mapping. Pot experiments showed these strains significantly increased organic matter and enzyme activity (e.g., urease, sucrase, peroxidase) in the rhizosphere soil versus the control group. These changes are crucial for restricting Cd mobility. Furthermore, strains 6-6 and 1-22 significantly enhance plant root detoxification of Cd, alleviating toxicity. Notably, increased pH likely plays a vital role in enhancing Cd precipitation and adsorption by strains, converting free Cd into non-bioavailable forms.

Fungal biodeterioration and preservation of cultural heritage, artwork, and historical artifacts: extremophily and adaptation

SUMMARYFungi are ubiquitous and important biosphere inhabitants, and their abilities to decompose, degrade, and otherwise transform a massive range of organic and inorganic substances, including plant organic matter, rocks, and minerals, underpin their major significance as biodeteriogens in the built environment and of cultural heritage. Fungi are often the most obvious agents of cultural heritage biodeterioration with effects ranging from discoloration, staining, and biofouling to destruction of building components, historical artifacts, and artwork. Sporulation, morphological adaptations, and the explorative penetrative lifestyle of filamentous fungi enable efficient dispersal and colonization of solid substrates, while many species are able to withstand environmental stress factors such as desiccation, ultra-violet radiation, salinity, and potentially toxic organic and inorganic substances. Many can grow under nutrient-limited conditions, and many produce resistant cell forms that can survive through long periods of adverse conditions. The fungal lifestyle and chemoorganotrophic metabolism therefore enable adaptation and success in the frequently encountered extremophilic conditions that are associated with indoor and outdoor cultural heritage. Apart from free-living fungi, lichens are a fungal growth form and ubiquitous pioneer colonizers and biodeteriogens of outdoor materials, especially stone- and mineral-based building components. This article surveys the roles and significance of fungi in the biodeterioration of cultural heritage, with reference to the mechanisms involved and in relation to the range of substances encountered, as well as the methods by which fungal biodeterioration can be assessed and combated, and how certain fungal processes may be utilized in bioprotection.

Toward Self-Healing Concrete Infrastructure: Review of Experiments and Simulations across Scales

Cement and concrete are vital materials used to construct durable habitats and infrastructure that withstand natural and human-caused disasters. Still, concrete cracking imposes enormous repair costs on societies, and excessive cement consumption for repairs contributes to climate change. Therefore, the need for more durable cementitious materials, such as those with self-healing capabilities, has become more urgent. In this review, we present the functioning mechanisms of five different strategies for implementing self-healing capability into cement based materials: (1) autogenous self-healing from ordinary portland cement and supplementary cementitious materials and geopolymers in which defects and cracks are repaired through intrinsic carbonation and crystallization; (2) autonomous self-healing by (a) biomineralization wherein bacteria within the cement produce carbonates, silicates, or phosphates to heal damage, (b) polymer-cement composites in which autonomous self-healing occurs both within the polymer and at the polymer-cement interface, and (c) fibers that inhibit crack propagation, thus allowing autogenous healing mechanisms to be more effective. In all cases, we discuss the self-healing agent and synthesize the state of knowledge on the self-healing mechanism(s). In this review article, the state of computational modeling across nano- to macroscales developed based on experimental data is presented for each self-healing approach. We conclude the review by noting that, although autogenous reactions help repair small cracks, the most fruitful opportunities lay within design strategies for additional components that can migrate into cracks and initiate chemistries that retard crack propagation and generate repair of the cement matrix.

Microbially Induced Calcium Carbonate Precipitation by Sporosarcina pasteurii: a Case Study in Optimizing Biological CaCO3 Precipitation

Current production of traditional concrete requires enormous energy investment that accounts for approximately 5 to 8% of the world's annual CO2 production. Biocement is a building material that is already in industrial use and has the potential to rival traditional concrete as a more convenient and more environmentally friendly alternative. Biocement relies on biological structures (enzymes, cells, and/or cellular superstructures) to mineralize and bind particles in aggregate materials (e.g., sand and soil particles). Sporosarcina pasteurii is a workhorse organism for biocementation, but most research to date has focused on S. pasteurii as a building material rather than a biological system. In this review, we synthesize available materials science, microbiology, biochemistry, and cell biology evidence regarding biological CaCO3 precipitation and the role of microbes in microbially induced calcium carbonate precipitation (MICP) with a focus on S. pasteurii. Based on the available information, we provide a model that describes the molecular and cellular processes involved in converting feedstock material (urea and Ca2+) into cement. The model provides a foundational framework that we use to highlight particular targets for researchers as they proceed into optimizing the biology of MICP for biocement production.

Extraction and application of extracellular polymeric substances from fungi

Extracellular polymeric substances (EPS) are extracellular metabolites of microorganisms, highly associated with microbial function, adaptation, and growth. The main compounds in EPS have been revealed to be proteins, polysaccharides, nucleic acids, humic substances, lipids, etc. EPS are not only biomass, but also a biogenic material. EPS have high specific surface, abundant functional groups, and excellent degradability. In addition, they are more extensible to the environment than the microbial cells themselves, which exhibits their huge advantages. Therefore, they have been applied in many fields, such as the environment, ecosystem, basic commodities, and medicine. However, the functions of EPS highly depend on the suitable extraction process, as different extraction methods have different effects on their composition, structure, and function. There are many types of EPS extraction methods, in which physical and chemical methods have been widely utilized. This review summarizes the extraction methods and applications of EPS. In addition, it considers some important gaps in current knowledge, and indicates perspectives of EPS for their future study.

Fungal-induced fossil biomineralization

Exceptional preservation of fossils has often been attributed to the actions of bacteria that aid in the preservation of soft tissues that normally decay rapidly. However, it is well known that fungi play a major role in organic matter decomposition, biogeochemical cycling of elements, and metal-mineral transformations in modern ecosystems. Although the fungal fossil record can be traced back over a billion years, there are only a few recorded examples of fungal roles in fossilization. In this research, we have carried out a detailed geobiological investigation on early Pleistocene hyena coprolites (fossilized dung) in an attempt to ascertain possible fungal involvement in their formation. Using an advanced microscopic and mineralogical approach, we found that numerous hydroxyapatite nanofibers (25-34 nm on average), interwoven to form spheroidal structures, constituted the matrix of the coprolites in addition to food remains. These structures were found to be extremely similar in texture and mineral composition to biominerals produced during laboratory culture of a common saprophytic and geoactive fungus, Aspergillus niger, in the presence of a solid source of calcium (Ca) and phosphorus (P). This observation, and our other data obtained, strongly suggests that fungal metabolism can provide a mechanism that can result in fossil biomineralization, and we hypothesize, therefore, that this may have contributed to the formation of well-preserved fossils (Lagerstätten) in the geological record. The characteristic polycrystalline nanofibers may also have served as a potential biosignature for fungal life in early Earth and extraterrestrial environments.

Simultaneous removal of ammonia nitrogen, recovery of phosphate, and immobilization of nickel in a polyester fiber with shell powder and iron carbon spheres bioreactor: Optimization and pathways mechanism

Composite pollutants are prevalent in wastewater, whereas, the simultaneous accomplishment of efficient nitrogen removal and resources recovery remains a challenge. In this study, a bioreactor was constructed to contain Pseudomonas sp. Y1 using polyester fiber wrapped with shell powder and iron carbon spheres, achieving ammonia nitrogen (NH₄⁺-N) removal, phosphate (PO₄^3--P) recovery, and nickel (Ni²⁺) immobilization. The optimal performance of bioreactor was average removal efficiencies of NH₄⁺-N, PO₄^3--P, calcium (Ca²⁺), and Ni²⁺ as 82.42, 96.67, 76.13, and 98.29% at a hydraulic retention time (HRT) of 6 h, pH of 7.0, and influent Ca²⁺ and Ni²⁺ concentrations of 100.0 and 3.0 mg L^-1, respectively. The bioreactor could remove PO₄^3--P, Ca²⁺, and Ni²⁺ by biomineralization, co-precipitation, adsorption, and lattice substitution. Moreover, microbial community analysis suggested that Pseudomonas was the predominant genus and had possessed tolerance to Ni²⁺ toxicity in wastewater. This study presented an effective method to synchronously remove NH₄⁺-N, recover PO₄^3--P, and fix heavy metals through microbially induced carbonate precipitation (MICP) and heterotrophic nitrification and aerobic denitrification (HNAD) technology.

Environmental and bioclimatic factors influencing yeasts and molds distribution along European shores

The present study employed data collected during the Mycosands survey to investigate the environmental factors influencing yeasts and molds distribution along European shores applying a species distribution modelling approach. Occurrence data were compared to climatic datasets (temperature, precipitation, and solar radiation), soil datasets (chemical and physical properties), and water datasets (temperature, salinity, and chlorophyll-a concentration) downloaded from web databases. Analyses were performed by MaxEnt software. Results suggested a different probability of distribution of yeasts and molds along European shores. Yeasts seem to tolerate low temperatures better during winter than molds and this reflects a higher suitability for the Northern European coasts. This difference is more evident considering suitability in waters. Both distributions of molds and yeasts are influenced by basic soil pH, probably because acidic soils are more favorable to bacterial growth. Soils with high nitrogen concentrations are not suitable for fungal growth, which, in contrast, are optimal for plant growth, favored by this environment. Finally, molds show affinity with soil rich in nickel and yeasts with soils rich in cadmium resulting in a distribution mainly at the mouths of European rivers or lagoons, where these metals accumulate in river sediments.

Biofilms on stone monuments: biodeterioration or bioprotection?

Debate on whether biofilms on stone monuments are biodeteriorative or bioprotective is long-standing. We propose a criterion of 'relative bioprotective ratio' for assessing the ambivalent role of the biofilms by comparing biodeterioration with weathering. A boundary between biodeterioration and bioprotection exists and fluctuates with dynamic microflora influenced by environmental conditions.