Development of green polylactic acid asymmetric ultrafiltration membranes for nutrient removal

Biocompatible PLA/spirulina microparticles via electrospraying for targeted drug delivery in HUVEC and HaCaT cell lines

Spirulina platensis, well-known for its abundant nutrients and sustainability, shows potential as a microcarrier for various biotechnological uses. However, its natural degradability presents a challenge. Polylactic Acid (PLA) offers a solution due to its biodegradability and compatibility. By using the electrohydrodynamic atomization technique (electrospraying), precise control over microparticle characteristics like size, shape, and composition is achieved by adjusting parameters such as voltage, flow rate, and solution properties. In this research, microparticles made from Spirulina extract and PLA were created through electrospraying to act as microcarriers. Different formulations were tested, including 3% PLA and blends of Spirulina extract and PLA at concentrations of 0.125%, 0.25%, and 0.5% using chloroform and ethanol in the ratio of 19:1. Through various tests (MTT assay and colony formation test) the biocompatibility of producing microparticles was assessed using HUVEC and HaCaT cell lines, indicating these microparticles' potential for diverse applications as microcarrier systems.

Fully-biodegradable and self-powered intelligent filter assembled by fibrous cellulose and MOF-functionalized poly(lactic acid) core-shell nanofibers for active PM capturing and passive respiratory sensing

With the increasing demand for ecofriendly air filtration materials, poly(lactic acid) (PLA) nanofibrous membranes (NFMs) show significant potential for efficient air purification while evading plastic pollution. However, there is still an urgent need to solve the issues of intrinsically low electroactivity and poor electret performance for PLA. Here, we prepared MOF-functionalized core-shell beaded PLA (MCSB-PLA) gradient nanofibers at fibrous cellulose, featuring a PLA/MOF-5 composite shell layer by coaxial electrospinning. Under the action of high-voltage electric field, MOF-5 nanocrystals were ready to interact with PLA chains, prompting the generation of highly refined and electroactive nanofibers. The MCSB-PLA NFMs were characterized by ultrafine fibers (diameter decrease of 23.5 %) and MOF-triggered bead-on-string microstructures. Meanwhile, both the surface potential and dielectric constant were largely elevated for MCSB-PLA NFMs (up to 5.2 kV and 1.86, respectively), accompanied by excellent tribo-output performance (236.8 % and 161.9 % increase in output voltage and current, respectively). Given the increased electroactivity, MCSB-PLA NFMs showed high-efficiency PM0.3 filtration (93.4 %, 106 Pa, at 32 L/min), representing an increase of 12.26 % compared to pure PLA counterpart (only 83.2 %). Even under high-humidity conditions, 91.3 % removal of PM0.3 was realized by MCSB-PLA (at 90 %RH and 32 L/min). Furthermore, the self-powered mechanisms were integrated with MCSB-PLA/cellulose, permitting real-time monitoring of physiological signals. The proposed degradable and highly electroactive MCSB-PLA NFMs is highly promising for air purification and passive healthcare.

Electrospun adsorbent membrane of PLA containing chitosan for toxic metal ions removal from aqueous solution: Effect of chitosan incorporation

The scarcity of water resources and their pollution are vital to modern civilization. Thus, adsorptive membranes are promising candidates to be applied in the filtration systems to improve the water quality. In summary, this study investigated the effect of chitosan (CS) in the morphological, chemical, and physical aspects of PLA-based membranes incorporating chitosan obtained by electrospinning process, their adsorption behavior in multielement aqueous systems containing Cr6+, Cu2+, Zn2+, Mn 2+, Ni2+, and Cd2+ in pH 4, and the possible removal mechanism on the composite electrospun membrane's surface. The addition of chitosan within the PLA matrix reduced the diameters and porosity of the fibers and pores, resulting in an improvement in the modulus of elasticity and tensile strength until rupture, reaching values around 346.4 ± 61.4 MPa and 4.57 ± 0.69 MPa for mechanical tests carried out in the alignment of fibers with the highest percentage of CS. Besides, the contact angle varied between 70 ± 5° and 114 ± 3°, depending on side of membrane's surface (smoother or rougher). For removal efficiency of six metal ions in multielement aqueous systems, the best results were verified for Cr6+ (40 up to 100 %). The adsorption efficiency did not significantly change when the chitosan content increased, but the value increased for Cr6+ percentage drastically. From SEM-EDS and XPS, indicatives of possible adsorption mechanism showed the contribution of amino groups and oxygen-rich functional groups of chitosan (especially oxyanion chromium); the PLA chain ends (active -COO- sites) for divalent metal ions removal, and the lowest ionic radius of chromium, that facilitate its removal. Thus, PLA membranes containing chitosan are a promising candidate with excellent mechanical and adsorptive properties for environmental remediation.

Enhanced hydrophilicity and antibacterial efficacy of in-situ silver nanoparticles decorated Ti3C2Tx/Polylactic acid composite membrane for real hospital wastewater purification

This study investigates the integration of Ti3C2Tx (MX) and Ag/Ti3C2Tx (Ag/MX) nanocomposites into polylactic acid membranes to enhance hydrophilicity and impart antibacterial properties, targeting hospital wastewater treatment. MX and silver nanoparticles are known for their hydrophilicity and antimicrobial capabilities, were synthesized and incorporated into PLA; a green polymer. The impact of nanocomposite concentration on the membrane's chemical structure, morphology, and overall performance were characterized using various PLA membrane properties and to evaluate the nanocomposite's performance in enhancing pure water flux and antibacterial efficacy. The pure water permeability increased from 1512 L m-2 h-1 bar-1 to 3108 L m-2 h-1 bar-1 in PLA/AgMX4 compared to PLA. Furthermore, a total bacteria count (TBC) rejection of up to 97 % was obtained using the PLA/AgMX4 membrane. The results demonstrated significant improvements in PLA/AgMX membranes compared to pristine PLA, showing a large potential for hospital wastewater treatment.

Integrating artificial intelligence modeling and membrane technologies for advanced wastewater treatment: Research progress and future perspectives

Membrane technologies have become proficient alternatives for advanced wastewater treatment, ensuring high contaminant removal and sustainable resource recovery. Despite significant progress, ongoing research efforts aim to further optimize treatment performance. Among the challenges faced, membrane fouling persists as a relevant obstacle in membrane technologies, necessitating the development of more effective mitigation strategies. Mathematical models, widely employed for predicting treatment performance, generally exhibit low accuracy and suffer from uncertainties due to the complex and variable nature of wastewater. To overcome these limitations, numerous studies have proposed artificial intelligence (AI) modeling to accurately predict membrane technologies' performance and fouling mechanisms. This approach aims to provide advanced simulations and predictions, thereby enhancing process control, optimization, and intensification. This literature review explores recent advancements in modeling membrane-based wastewater treatment processes through AI models. The analysis highlights the enormous potential of this research field in enhancing the efficiency of membrane technologies. The role of AI modeling in defining optimal operating conditions, developing effective strategies for membrane fouling mitigation, enhancing the performance of novel membrane-based technologies, and improving membrane fabrication techniques is discussed. These enhanced process optimization and control strategies driven by AI modeling ensure improved effluent quality, optimized resource consumption, and minimized operating costs. The potential contribution of this cutting-edge approach to a paradigm shift toward sustainable wastewater treatment is examined. Finally, this review outlines future perspectives, emphasizing the research challenges that require attention to overcome the current limitations hindering the integration of AI modeling in wastewater treatment plants.

Enhancing Sustainability in PLA Membrane Preparation through the Use of Biobased Solvents

For the first time, ultrafiltration (UF) green membranes were prepared through a sustainable route by using PLA as a biopolymer and dihydrolevoclucosenone, whose trade name is Cyrene™ (Cyr), dimethyl isosorbide (DMI), and ethyl lactate (EL) as biobased solvents. The influence of physical-chemical properties of the solvent on the final membrane morphology and performance was evaluated. The variation of polymer concentration in the casting solution, as well as the presence of Pluronic® (Plu) as a pore former agent, were assessed as well. The obtained results highlighted that the final morphology of a membrane was strictly connected with the interplaying of thermodynamic factors as well as kinetic ones, primarily dope solution viscosity. The pore size of the resulting PLA membranes ranged from 0.02 to 0.09 μm. Membrane thickness and porosity varied in the range of 0.090-0.133 mm of 75-87%, respectively, and DMI led to the most porous membranes. The addition of Plu to the casting solution showed a beneficial effect on the membrane contact angle, allowing the formation of hydrophilic membranes (contact angle < 90°), and promoted the increase of pore size as well as the reduction of membrane crystallinity. PLA membranes were tested for pure water permeability (10-390 L/m2 h bar).

Recent developments in solar-powered membrane distillation for sustainable desalination

The freshwater shortage continues to be one of the greatest challenges affecting our planet. Although traditional membrane distillation (MD) can produce clean water regardless of climatic conditions, the process wastes a lot of energy. The technique of solar-powered membrane distillation (SPMD) has received a lot of interest in the past decade, thanks to the development of photothermal materials. SPMD is a promising replacement for the traditional MD based on fossil fuels, as it can prevent the harmful effects of emissions on the environment. Integrating green solar energy with MD can reduce the cost of the water purification process and secure freshwater production in remote areas. At this point, it is important to consider the most current progress of the SPMD system and highlight the challenges and prospects of this technology. Based on this, the background, recent advances, and principles of MD and SPMD, their configurations and mechanisms, fabrication methods, advantages, and current limitations are discussed. Detailed comparisons between SPMD and traditional MD, assessments of various standards for incorporating photothermal materials with desirable properties, discussions of desalination and other applications of SPMD and MD, and energy consumption rates are also covered. The final section addresses the potential of SPMD to outperform traditional desalination technology while improving water production without requiring a significant amount of electrical or high-grade thermal energy.

Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Novel eco-friendly polylactic acid nanocomposite integrated membrane system for sustainable wastewater treatment: Performance evaluation and antifouling analysis

Water contamination caused by heavy metals, nutrients, and organic pollutants of varying particle sizes originating from domestic and industrial processes poses a significant global challenge. There is a growing concern, particularly regarding the presence of heavy metals in freshwater sources, as they can be toxic even at low concentrations, posing risks to human health and the environment. Currently, membrane technologies are recognized as effective and practical for treating domestic and industrial wastewater. However, these technologies are hindered by fouling issues. Furthermore, the utilization of conventional membranes leads to the accumulation of non-recyclable synthetic polymers, commonly used in their production, resulting in adverse environmental consequences. In light of our previously published studies on environmentally friendly, biodegradable polylactic acid (PLA) nanocomposite mixed matrix membranes (MMMs), we selected two top-performing PLA-based ultrafiltration nanocomposite membranes: one negatively charged (PLA-M-) and one positively charged (PLA-M+). We integrated these membranes into systems with varying arrangements to control fouling and eliminate heavy metals, organic pollutants, and nutrients from raw municipal wastewater collected by the local wastewater treatment plant in Abu Dhabi (UAE). The performance of two integrated systems (i.e., PLA-M+/PLA-M- and PLA-M-/PLA-M+) was compared in terms of permeate flux, contaminant removal efficiencies, and fouling mitigation. The PLA-M+/PLA-M- system achieved removal efficiencies of 79.6 %, 92.6 %, 88.7 %, 85.2 %, 98.9 %, 94 %, 83.3 %, and 98.3 % for chemical oxygen demand (COD), nitrate (NO3--N), phosphate (PO43--P), ammonium (NH4+-N), iron (Fe), zinc (Zn), nickel (Ni), and copper (Cu), respectively. On the other hand, the PLA-M-/PLA-M+ system recorded removal efficiencies of 85.8 %, 95.9 %, 100 %, 81.9 %, 99.3 %, 91.9 %, 72.9 %, and 98.9 % for COD, NO3--N, PO43--P, NH4+-N, Fe, Zn, Ni, and Cu, respectively. Notably, the PLA-M-/PLA-M+ system demonstrated superior antifouling resistance, making it the preferred integrated system. These findings demonstrate the potential of eco-friendly PLA nanocomposite UF-MMMs as a promising alternative to petroleum-based polymeric membranes for efficient and sustainable wastewater treatment.

Going beyond Cellulose and Chitosan: Synthetic Biodegradable Membranes for Drinking Water, Wastewater, and Oil-Water Remediation

Membrane technology is an efficient way to purify water, but it generates non-biodegradable biohazardous waste. This waste ends up in landfills, incinerators, or microplastics, threatening the environment. To address this, research is being conducted to develop compostable alternatives that are sustainable and ecofriendly. Bioplastics, which are expected to capture 40% of the market share by 2030, represent one such alternative. This review examines the feasibility of using synthetic biodegradable materials beyond cellulose and chitosan for water treatment, considering cost, carbon footprint, and stability in mechanical, thermal, and chemical environments. Although biodegradable membranes have the potential to close the recycling loop, challenges such as brittleness and water stability limit their use in membrane applications. The review suggests approaches to tackle these issues and highlights recent advances in the field of biodegradable membranes for water purification. The end-of-life perspective of these materials is also discussed, as their recyclability and compostability are critical factors in reducing the environmental impact of membrane technology. This review underscores the need to develop sustainable alternatives to conventional membrane materials and suggests that biodegradable membranes have great potential to address this challenge.

Bio-Based Polymeric Membranes: Development and Environmental Applications

Nowadays, membrane technology is an efficient process for separating compounds with minimal structural abrasion; however, the manufacture of membranes still has several drawbacks to being profitable and competitive commercially under an environmentally friendly approach. In this sense, this review focuses on bio-based polymeric membranes as an alternative to solve the environmental concern caused by the use of polymeric materials of fossil origin. The fabrication of bio-based polymeric membranes is explained through a general description of elements such as the selection of bio-based polymers, the preparation methods, the usefulness of additives, the search for green solvents, and the characterization of the membranes. The advantages and disadvantages of bio-based polymeric membranes are discussed, and the application of bio-based membranes to recover organic and inorganic contaminants is also discussed.

A Green Stable Antifouling PEGylated PVDF Membrane Prepared by Vapor-Induced Phase Separation

While green solvents are being implemented in the fabrication of polyvinylidene fluoride (PVDF) membranes, most are not compatible with the vapor-induced phase separation (VIPS) process for which relatively low dissolution temperatures are required. Additionally, preparing antifouling green membranes in one step by blending the polymer with an antifouling material before inducing phase separation remains extremely challenging due to the solubility issues. Here, the green solvent triethyl phosphate (TEP) was used to solubilize both PVDF and a copolymer (synthesized from styrene monomer and poly(ethylene glycol) methyl ether methacrylate). VIPS was then used, yielding symmetric bi-continuous microfiltration membranes. For a 2 wt% copolymer content in the casting solution, the corresponding membrane P2 showed a homogeneous and dense surface distribution of the copolymer, resulting in a high hydration capacity (>900 mg/cm3) and effective resistance to biofouling during the adsorption tests using bovine serum albumin, Escherichia coli or whole blood, with a measured fouling reduction of 80%, 89% and 90%, respectively. Cyclic filtration tests using bacteria highlighted the competitive antifouling properties of the membranes with a flux recovery ratio after two water/bacterial solution cycles higher than 70%, a reversible flux decline ratio of about 62% and an irreversible flux decline ratio of 28%. Finally, these green antifouling membranes were shown to be stable despite several weeks of immersion in water.

Biodegradable Dissolved Organic Carbon (BDOC) Removal from Micro-Polluted Water Source Using Ultrafiltration: Comparison with Conventional Processes, Operation Conditions and Membrane Fouling Control

The biodegradable dissolved organic carbon (BDOC) in micro-polluted water sources affects the drinking water quality and safety in the urban water supply. The conventional technology of “coagulation-sedimentation-filtration” in a water plant located in the lower reaches of the Yangtze River removed dissolved organic carbon (DOC) with a molecular weight (MW) > 30 kDa effectively, but the BDOC elimination only ranged 27.4−58.1%, due to their predominant smaller MW (<1 kDa), leading to a high residual BDOC of 0.22−0.33 mg/L. To ensure the biological stability of drinking water, i.e., the inability to support microbial growth (BDOC < 0.2 mg/L), a pilot-scale ultrafiltration process (UF, made of aromatic polyamide with MW cut-off of 1 kDa) was operated to remove BDOC as an advanced treatment after sand-filtration. Results showed the membrane flux decreased with the increase in the influent BDOC concentration and decrease in operating pressure. With an operating pressure of 0.25 MPa, the BDOC removal by UF reached 80.7%, leading to a biologically stable BDOC concentration of 0.08 mg/L. The fouling of the membrane was mainly caused by organic pollution. The H2O2−HCl immersion washing method effectively cleaned the membrane surface fouling, with a recovery of membrane flux of 98%.

Recovery of Nutrients from Residual Streams Using Ion-Exchange Membranes: Current State, Bottlenecks, Fundamentals and Innovations

The review describes the place of membrane methods in solving the problem of the recovery and re-use of biogenic elements (nutrients), primarily trivalent nitrogen N^III and pentavalent phosphorus P^V, to provide the sustainable development of mankind. Methods for the recovery of NH₄⁺ − NH₃ and phosphates from natural sources and waste products of humans and animals, as well as industrial streams, are classified. Particular attention is paid to the possibilities of using membrane processes for the transition to a circular economy in the field of nutrients. The possibilities of different methods, already developed or under development, are evaluated, primarily those that use ion-exchange membranes. Electromembrane methods take a special place including capacitive deionization and electrodialysis applied for recovery, separation, concentration, and reagent-free pH shift of solutions. This review is distinguished by the fact that it summarizes not only the successes, but also the “bottlenecks” of ion-exchange membrane-based processes. Modern views on the mechanisms of NH₄⁺ − NH₃ and phosphate transport in ion-exchange membranes in the presence and in the absence of an electric field are discussed. The innovations to enhance the performance of electromembrane separation processes for phosphate and ammonium recovery are considered.