Comparison on anaerobic phosphorus release and recovery from waste activated sludge by different chemical pretreatment methods: Focus on struvite quality and benefit analysis

Phosphorus recovery through struvite crystallization from real wastewater: Bridging gaps from lab to market

Food security will be jeopardized as reserves of the non-renewable phosphate rock, which is used to manufacture phosphorus fertilizers, are rapidly depleting. Meanwhile, excess nutrient (phosphorus and nitrogen) loads coming from improperly treated nutrient-rich wastewaters are disposed in soil and water resources, and significantly affect the atmosphere, lithosphere, hydrosphere and biosphere. Struvite crystallization (SC) offers a promising solution, recovering nutrients as a slow-release fertilizer. However, SC's application across various wastewater types remains limited, with few full-scale implementations. This review examines SC process, focusing on studies using real wastewaters. Key SC methodologies include chemical, electrochemical, ion-exchange precipitation, membrane crystallization, and microbial mineralization. Wastewater pretreatment methods are classified and critically evaluated, while SC-affecting factors like calcium and salinity are discussed. To enhance SC's economic sustainability, future research should prioritize cost-efficient reactor designs, energy recovery strategies, and regulatory compliance to develop market-ready, waste-derived fertilizers that are safe for agricultural applications.

Wide-detection-range, highly-sensitive, environmental-friendly and flexible cellulose-based capacitive humidity sensor

Humidity sensors are widely used in industries, agriculture, climate control, and health monitoring, especially in flexible, environmentally friendly wearable electronics. However, existing sensors often suffer from limited detection ranges and low sensitivity. This work reports a flexible, environmentally friendly, highly sensitive humidity sensor with a wide detection range, which is made of cellulose, MXene, and sodium polyacrylate via vacuum filtration and impregnation method. The abundant polar functional groups of the materials enable humidity sensing across a broad range. This study reveals the significant enhancement in sensitivity of capacitive humidity sensors through the construction of multiple water layers that create proton and ion transport channels. The sensor shows a wide detection range (10 % RH to 90 % RH), low hysteresis (1.42 %), sensitivity of 2.11 pF/%RH (10 % RH to 41 % RH), and high sensitivity of 60.97 pF/%RH (41 % RH to 84 % RH). Additionally, it can distinguish breathing patterns and rates, enabling both non-contact and contact sensing, with potential applications in health monitoring. This work offers new insights into the development of flexible, environmentally friendly capacitive humidity sensors with high sensitivity and wide detection ranges.

Efficient phosphorus recovery from waste activated sludge: Pretreatment with natural deep eutectic solvent and recovery as vivianite

Recycling phosphorus from waste activated sludge (WAS) is an effective method to address the nonrenewable nature of phosphorus and mitigate environmental pollution. To overcome the challenge of low phosphorus recovery from WAS due to insufficient disintegration, a method using a citric acid-based natural deep eutectic solvent (CA-NADES) assisted with low-temperature pretreatment was proposed to efficiently release and recover phosphorus. The results of 31P nuclear magnetic resonance (NMR) confirmed that low-temperature pretreatment promoted the conversion of organic phosphorus (OP) to inorganic phosphorus (IP) and enhanced the effect of CA-NADES. Changes in the three-dimensional excitation-emission matrix (3D-EEM) and flow cytometry (FCM) indicated that the method of CA-NADES with low-temperature thermal simultaneously release IP and OP by disintegrating sludge flocs, dissolving extracellular polymeric substances (EPS) structure, and cracking cells. When 5 % (v/v) of CA-NADES was added and thermally treated at 60 °C for 30 min, 43 % of total phosphorus (TP) was released from the sludge. The concentrations of proteins and polysaccharides reached 826 and 331 mg/L, respectively, which were 6.30 and 14.43 times higher than those of raw sludge. The dewatering and settling of the sludge were also improved. Metals were either enriched in the solid phase or released into the liquid phase in small quantities (most efficiencies of less than 10 %) for subsequent clean recovery. The released phosphorus was successfully recovered as vivianite with a rate of 90 %. This study develops an efficient, green, and sustainable method for phosphorus recovery from sludge using NADES and provides new insights into the high-value conversion of sludge.

Enhanced nutrient recovery from anaerobically digested poultry wastewater through struvite precipitation by organic acid pre-treatment and seeding in a bubble column electrolytic reactor

Limited mineralization of organic phosphorus to phosphate during the anaerobic digestion process poses a significant challenge in the development of cost-effective nutrient recovery strategies from anaerobically digested poultry wastewater (ADPW). This study investigated the influence of organic acids on phosphorus solubilization from ADPW, followed by its recycling in the form of struvite using a bubble column electrolytic reactor (BCER) without adding chemicals. The impact of seeding on the efficiency of PO43- and NH3-N recovery as well as the size distribution of recovered precipitates from the acid pre-treated ADPW was also evaluated. Pre-treatment of the ADPW with oxalic acid achieved complete solubilization of phosphorus, reaching ∼100% extraction efficiency at pH 2.5. The maximum removal efficiency of phosphate and ammonia-nitrogen from the ADPW were 88.9% and 90.1%, respectively, while the addition of 5 and 10 g/L struvite seed to the BCER increased PO43- removal efficiency by 9.6% and 11.5%, respectively. The value of the kinetic rate constant, k, increased from 0.0176 min-1 (unseeded) to 0.0198 min-1, 0.0307 min-1, and 0.0375 min-1 with the seed loading rate of 2, 5, and 10 g/L, respectively. Concurrently, the average particle size rose from 75.3 μm (unseeded) to 82.1 μm, 125.7 μm, and 148.9 μm, respectively. Results from XRD, FTIR, EDS, and dissolved chemical analysis revealed that the solid product obtained from the recovery process was a multi-nutrient fertilizer consisting of 94.7% struvite with negligible levels of heavy metals.

Clarification of the phosphorus release mechanism for recovering phosphorus from biofilm sludge in alternating aerobic/anaerobic biofilm system

A novel wastewater treatment plant process was constructed to overcome the challenge of simultaneous nitrate removal and phosphorus (P) recovery. The results revealed that the P and nitrate removal efficiency rose from 39.0 % and 48.4 % to 92.8 % and 93.6 % after 136 days of operation, and the total P content in the biofilm (TPbiofilm) rose from 15.8 mg/g SS to 57.8 mg/g SS. Moreover, the increase of TPbiofilm changed the metabolic mode of denitrifying polyphosphate accumulating organisms (DPAOs), increasing the P concentration of the enriched stream to 172.5 mg/L. Furthermore, the acid/alkaline fermentation led to the rupture of the cell membrane, which released poly-phosphate and ortho-phosphate of cell/EPS in DPAOs and released metal‑phosphorus (CaP and MgP). In addition, high-throughput sequencing analysis demonstrated that the relative abundance of DPAOs involved in P storage increased, wherein the abundance of Acinetobacter and Saprospiraceae rose from 8.0 % and 4.1 % to 16.1 % and 14.0 %. What's more, the highest P recovery efficiency (98.3 ± 1.1 %) could be obtained at optimal conditions for struvite precipitation (pH = 7.56 and P: N: Mg = 1.87:3.66:1) through the response surface method (RSM) simulation, and the precipitates test analysis indicated that P recovery from biofilm sludge was potentially operable. This research was of great essentiality for exploring the recovery of P from biofilm sludge.

Using Fe(II)/Fe(VI) activated peracetic acid as pretreatment of ultrafiltration for secondary effluent treatment: Water quality improvement and membrane fouling mitigation

Ultrafiltration (UF) is a technology commonly used to treat secondary effluents in wastewater reuse; however, it faces two main challenges: 1) membrane fouling and 2) inadequate nitrogen (N), phosphorus (P), and organic micropollutants (OMPs) removal. To address these two issues, in this study, we applied peracetic acid (PAA), Fe(VI)/PAA, and Fe(II)/PAA as UF pretreatments. The results showed that the most effective pretreatment was Fe(II)/200 μM PAA, which reduced the total fouling resistance by 90.2%. In comparison, the reduction was only 29.7% with 200 μM PAA alone and 64.3% with Fe(VI)/200 μM PAA. Fe(II)/200 μM PAA could effectively remove fluorescent components and hydrophobic organics in effluent organic matter (EfOM), and enhance the repulsive force between foulants and membrane (according to XDLVO analysis), and consequently, mitigate pore blocking and delay cake layer formation. Regarding pollutant removal, Fe(II)/200 μM PAA effectively degraded OMPs (>85%) and improved P removal by 58.2% via in-situ Fe(Ⅲ) co-precipitation. The quencher and probe experiments indicated that FeIVO2+, •OH, and CH3C(O)OO•/CH3C(O)O• all played important roles in micropollutant degradation with Fe(II)/PAA. Interestingly, PAA oxidation produced highly biodegradable products such as acetic acid, which significantly elevated the BOD5 level and increased the BOD5/total nitrogen (BOD5/TN) ratio from 0.8 to 8.6, benefiting N removal with subsequent denitrification. Overall, the Fe(II)/PAA process exhibits great potential as a UF pretreatment to control membrane fouling and improve water quality during secondary effluent treatment.

Revealing the role of phosphorus supply on the phosphorus distribution and lipid production in Scenedesmus obliquus UTEX 393 during nitrogen starvation

Microalgal-based processes offer promise for addressing two sustainability challenges: recovering phosphorus (P) from wastewater and producing biofuel feedstock. This study investigated the role of phosphorus supply on microalgal growth, lipid yield, and P distribution for Scenedesmus during nitrogen starvation. Extracellular polymeric substances and intracellular polymeric substances were the most important pools for inorganic phosphorus (IP) and organic phosphorus (OP), respectively. The main P pool for microalgae with low phosphorus supply was EPS, which accounted for 57 % of the total biomass phosphorus; while under high P concentrations, 79 % of the phosphorus was stored in IPS. A high concentration of orthophosphate stimulated rapid P uptake as IP and promoted the transformation of IP to OP associating with biomass synthesis. The highest P content of microalgal biomass was 6.5 % of dry weight when the phosphorus concentration in medium was 113 mg/L, and the OP content was 4.9 % of dry weight. High phosphate-P enhanced the biomass's lipid content by 60 %, and the distribution of fatty acid methyl esters was not altered by P concentrations. Collectively, high phosphate-P availability could promote microalgal biomass synthesis, lipid production and P accumulation.

High Purity Struvite Recovery from Hydrothermally-Treated Sludge Supernatant Using Magnetic Zirconia Adsorbent

Recovery of phosphorus from sludge will help to alleviate the phosphorus resource crisis. However, the release of phosphorus from sludge is accompanied by the leaching of large amounts of coexisting ions, i.e., Fe, Al, Ca, and organic matter, which decreases the purity of sludge-derived products. In this study, an adsorption-desorption process using magnetic zirconia (MZ) as the adsorbent is proposed to obtain a high purity recovery product. The process involves selective adsorption of phosphate from the hydrothermally treated sludge supernatant (HTSS) using MZ, followed by desorption and precipitation to obtain the final product: struvite. The results indicated that at a dosage of 15 g/L, more than 95% of phosphorus in the HTSS could be adsorbed by MZ. Coexisting ions (Ca²⁺, Mg²⁺, Fe³⁺, Al³⁺, SO₄^2-, NO₃^-, Cl^-, etc.) and organic matter (substances similar to fulvic and humic acid) in the HTSS had a limited inhibitory effect on phosphate adsorption. Using a binary desorption agent (0.1 mol/L NaOH + 1 mol/L NaCl), 90% of the adsorbed phosphorus could be desorbed. Though adsorption-desorption treatment, struvite purity of the precipitated product increased from 41.3% to 91.2%. Additionally, MZ showed good reusability, maintaining a >75% capacity after five cycles. X-ray photoelectron spectroscopy (XPS) indicated that MZ adsorbed phosphate mainly by inner-sphere complexation. This study provided a feasible approach for the recovery of phosphorus from sludge with high purity.