Reduction performance of microplastics and their behavior in a vermi-wetland during the recycling of excess sludge: A quantitative assessment for fluorescent polymethyl methacrylate

Forensic determination of adhesive vinyl microplastics in urban soils

Plastic production and consumption hubs are mainly concentrated in urban centers, causing the soil in these places to become sinks of plastic fragments. Adhesive vinyl polymers are widely used in various commercial sectors and, to the best of our knowledge, this is the first study to investigate the potential for this type of material to form microplastics in urban soils. This proof-of-concept work started by studying the soil around a sign made of adhesive vinyl that had been exposed to the weather for eight years and showed evident signs of degradation, like cracking and color fading. We separated the microplastics with a two-step density separation protocol and selected only the microplastics targeted by this research, finding up to 5,570 fragments produced from 1 cm2 of adhesive vinyl film. In the soil below the sign, we registered 5.6 × 104 fragments kg-1 of dry soil on its topsoil layer (0-10 cm), 1.2 × 104 fragments kg-1 in the 10-20 cm layer, and 1 × 104 fragments kg-1 in the 20-30 layer. At a distance of 1 and 2 m from the sign, the highest concentration of fragments was also in the topsoil, respectively 9.3 × 103 and 5.3 × 102 fragments kg-1. We also observed that vertical and horizontal transport was not favored, causing the formation of hotspots near the source and that the area of the fragments did not influence vertical transport. Another important finding regarding the characterization technique is that degraded polyvinyl chloride is unlikely to be identified through FTIR without comparison to the source. Here, we presented a low-cost forensic assessment of the association between the presence of MPs and its source that can be used both for the development of public policies and for setting up quality controls for polluting companies.The results here presented reveal the need to rethink the use and types of materials used for visual identities and signage in urban environments.

Optimization of microplastic removal based on the complementarity of constructed wetland and microalgal-based system

As one of the emblematic emerging contaminants, microplastics (MPs) have aroused great public concern. Nevertheless, the global community still insufficiently acknowledges the ecological health risks and resolution strategies of MP pollution. As the nature-based biotechnologies, the constructed wetland (CW) and microalgal-based system (MBS) have been applied in exploring the removal of MPs recently. This review separately presents the removal research (mechanism, interactions, implications, and technical defects) of MPs by a single method of CWs or MBS. But one thing with certitude is that the exclusive usage of these techniques to combat MPs has non-negligible and formidable challenges. The negative impacts of MP accumulation on CWs involve toxicity to macrophytes, substrates blocking, and nitrogen-removing performance inhibition. While MPs restrict MBS practical application by making troubles for separation difficulties of microalgal-based aggregations from effluent. Hence the combined strategy of microalgal-assisted CWs is proposed based on the complementarity of biotechnologies, in an attempt to expand the removing size range of MPs, create more biodegradable conditions and improve the effluent quality. Our work evaluates and forecasts the potential of integrating combination for strengthening micro-polluted wastewater treatment, completing the synergistic removal of MP-based co-pollutants and achieving long-term stability and sustainability, which is expected to provide new insights into MP pollution regulation and control.

Polystyrene microplastics accumulation in lab-scale vertical flow constructed wetlands: impacts and fate

Microplastics (MPs) are ubiquitous pollutants that significantly threaten organisms and ecosystems. Constructed wetlands (CWs), a nature-based treatment technology, can effectively remove MPs from wastewater. However, the responses of CWs when exposed to MPs remain unclear. In this study, lab-scale vertical flow constructed wetlands (VFCWs) were installed for receiving polystyrene (PS) MPs at concentrations of 100 μg/L and 1000 μg/L. The results showed that exposure to PS-MPs has no effects on COD and TP removal in VFCWs, but TN removal decreased by 3.69-5.37 %. Further investigation revealed that PS-MPs significantly impacted microbial communities and metabolic functions. The abundances of predominant nitrifiers (Nitrospira and Nitrosomonas) and denitrifiers (Nakamurella, Bradyrhizobium, and Bacillus) in VFCWs were significantly reduced, aligning with the responses of key enzymes. The presence of PS-MPs also decreased nitrogen removal by plant uptake, leading to decreased plant biomass and chlorophyll by 39.32-48.75 % and 5.92-32.19 %, respectively. Notably, > 90 % removal rates were observed for PS-MPs within VFCWs. In addition to PS-MPs interception by VFCWs substrate, the increase of released benzenes indicated that the PS-MPs biodegradation occurred. Such insights are vital for developing sustainable solutions to mitigate MPs' adverse effects on ecosystems.

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Contemporary Drift in Emerging Micro(nano)plastics Removal and Upcycling Technologies from Municipal Wastewater Sludge: Strategic Innovations and Prospects

Purpose of Review

Annually, huge amounts of microplastics (MPs) are added to farmlands through sewage sludge (SS)/biosolid applications as a fertilizer. Most research emphasizes the enormity of the problem and demonstrates the fate, impacts, and toxicity of MPs during SS treatment processes and land applications. None has addressed the management strategies. To address the gaps, the current review evaluates the performance analysis of conventional and advanced sludge treatment methods in eliminating MPs from sludge.

Recent Findings

The review uncovers that the occurrence and characteristics of MPs in SS are highly governed by factors such as population density, speed and level of urbanization, citizens' daily habits, and treatment units in wastewater treatment plants (WWTPs). Furthermore, conventional sludge treatment processes are ineffective in eliminating MPs from SS and are accountable for the increased small-sized MPs or micro(nano)plastics (MNPs) along with altered surface morphology facilitating more co-contaminant adsorption. Simultaneously, MPs can influence the operation of these treatment processes depending on their size, type, shape, and concentration. The review reveals that research to develop advanced technology to remove MPs efficiently from SS is still at a nascent stage.

Summary

This review provides a comprehensive analysis of MPs in the SS, by corroborating state-of-the-knowledge, on different aspects, including the global occurrence of MPs in WWTP sludge, impacts of different conventional sludge treatment processes on MPs and vice versa, and efficiency of advanced sludge treatment and upcycling technologies to eliminate MPs, which will facilitate the development of mitigation measures from the systematic and holistic level.

Graphical Abstract