Distribution of microplastics in benthic sediments of Qinghai Lake on the Tibetan Plateau, China

Microplastic pollution in the glaciers, lakes, and rivers of the Hindu Kush Himalayas: Knowledge gaps and future perspectives

The Hindu Kush Himalayas (HKH), often referred to as the Third Pole and the Water Tower of Asia, represents a vital geo-ecological asset, providing essential services to millions of people. However, this once-pristine environment is increasingly threatened by the influx of microplastics. This study provides a comprehensive overview of the current state of microplastic pollution in the HKH region, identifies key research gaps, and highlights areas for future research. A review of existing literature reveals the lack of standardized protocols for microplastics analysis, which hinders cross-study comparisons. The reported microplastic abundances vary widely across environmental matrices including 0.14-31,200 MPs m-3 in river water, 0.072-26,000 MPs kg-1 in river sediments, 180-5500 MPs kg-1 in lake sediments, 55-2380 MPs kg-1 in lake shoreline sediments, 30-871.34 MPs L-1 in glaciers, and 2.23-130 MPs L-1 in lake surface water. Polymer characterization using spectroscopic techniques has identified 54 polymer types across different environmental matrices in the HKH region with polypropylene (PP) being the most dominant, followed by polyethylene (PE), and polystyrene (PS). The sources of microplastics in the HKH region include both local activities and long-range atmospheric transport. Although research on microplastics in the region has gained momentum in recent years, significant knowledge gaps remain regarding their fate, degradation mechanisms, and environmental impacts. Further studies are essential to investigate the role of microplastics as light-absorbing impurities that may accelerate glacier melting, as well as their implications for biodiversity and human health in the region.

Microplastic distribution in large shallow lake sediments: Variations with offshore distance and implications for microbial communities

Microplastics (MPs) are ubiquitous in global ecosystems and pose potential threats to the environment and biodiversity. However, the impact of MPs on microorganisms in real environments remains unclear. Our study focuses on the composition and distribution of MPs in sediments at different offshore distances in Taihu Lake. Our results indicated that MP abundance ranged from 240 to 1120 items/kg and decreased linearly with increasing offshore distance. Fibres dominated, with an average proportion of 47.58 %, and MPs within a particle size range of 0.5-1 mm (53.88 %) had the highest content. PA and PVC were the most abundant polymer types, accounting for 55.85 % and 17.94 %, respectively. The abundance of MPs in sediments was significantly positively correlated (P < 0.01) with the abundance of Firmicutes and significantly negatively correlated with the abundance of Planctomycetota. MPs account for 0.49 % of the variation in microbial alpha diversity and 1.88 % of the variation in microbial community composition. Our study demonstrates that environmental factor and MPs significantly affect microbial diversity and species composition. In summary, our research reveals the distribution patterns of MPs in sediments at different offshore distances in Taihu Lake, confirming the potential impact of MPs on microbial communities.

Microplastics in lakes: Distribution patterns and influencing factors

As a kind of new pollutants, microplastics (MPs) have aroused public concern due to their widespread presence and potential ecological risks. Lakes, as crucial freshwater ecosystems and important water resources, are particularly vulnerable to MPs pollution. While MPs are known to be unevenly distributed within lakes, their distribution patterns and influencing factors have not been thoroughly understood. This review analyzes 84 field studies across 64 lakes worldwide to elucidate MPs distribution patterns and their driving mechanisms. Analysis reveals that MPs abundance is typically highest near areas of intense human activity and major water inflows, though hydrodynamics and wind conditions also influence spatial patterns. MPs characteristics (shape, size, color, polymer type) show distinct distribution patterns influenced by source types, transport mechanisms, and degradation processes. While surface water MPs concentrations vary seasonally due to precipitation, wind, and human activities, sediment cores indicate increasing MPs abundance in recent deposits. Integration of water and sediment sampling reveals that MPs characteristics affect their vertical distribution, with denser particles prone to sedimentation. This review identifies key knowledge gaps, including limited data on vertical distributions and temporal variations, and emphasizes the need for standardized methods and quantitative analysis of driving factors. These reviewed findings provide a foundation for understanding MPs fate in lake ecosystems and improving risk assessment capabilities, offering valuable insights for future surveys on MPs.

Microplastic pollution in Taihu Lake: Spatial distribution from the lake inlet to the lake centre and vertical stratification in the water column

The aim of this study was to analyse the distribution characteristics of microplastics in lakes, assess their potential impacts on ecosystems, and explore effective management and control strategies. Despite a wealth of research focused on lake water, the variations in microplastics with offshore distance and their vertical distribution within the water column are not well understood. Here, we investigated the freshwater continuum from the inlet of Taihu Lake to the centre, and vertically from the surface to the bottom water. The results revealed that the distribution of microplastics (<5 mm in size) exhibited a clear spatial gradient. The microplastic abundance at the lake entrance was 2.12 times greater than that at the centre, and on the lake surface, the microplastic abundance was 1.36-1.69 times higher than that estimated from the water column. Notably, the proportion of small-sized microplastics (<0.1 mm) in the bottom water was 1.72 times higher than that in the surface water. The main types of polymers identified were polyamide (PA) and polyvinyl chloride (PVC), and their main sources may be from clothes washing and industrial activities. The Monte Carlo simulation results indicated that the overall risk of microplastics in surface water was higher than that in the water column, and the contributions of PVC and polyurethane (PU) to the ecological risk were 90.10% and 9.57%, respectively. Therefore, PVC and PU should be the priority of microplastic pollution control. This study provides the first comprehensive evaluation of the spatial ecological risk of microplastics in Taihu Lake, which improves our understanding of the distribution and environmental risks of microplastics in lake systems.

The influence of water conservancy project on microplastics distribution in river ecosystem: A case study of Lhasa River Basin in Qinghai-Tibet Plateau

Water conservancy projects affect the migration, suspension, and deposition of microplastic (MP). However, its impact on MP pollution of river ecosystem remains elusive. Herein, we investigated the MP characteristics and the influence of water conservancy projects on MPs in the Lhasa River Basin of the Qinghai-Tibet Plateau, China. The results demonstrated that the MPs concentration in surface water decreased from upstream to downstream, as more MPs in surface water were settling down and stored in reservoir sediments in the midstream. It is postulated that reservoir sedimentation of MPs occurs at a greater rate due to the barrier effect of reservoirs, steady hydrodynamics, and weak salinity-induced buoyancy. To evaluate the ecological risk of the Lhasa River Basin, the pollution load index, the polymer hazard index, and the potential ecological risk index were analyzed. The upstream exhibits elevated polymer hazard index values (>100), and the potential ecological risk index values in the Lhasa River Basin showed ecological risk similar to those of pollution load index values. This research represents the initial exploration of MP distribution within the entire Lhasa River basin, providing a foundational framework for investigating the impact of water conservancy projects on MP migration.

Driving factors of the distribution of microplastics in the surface soil of the typical uninhabited and habited areas in the Qinghai-Tibet plateau, China

Microplastics (MPs) are widely detected in the soil of the Qinghai-Tibet Plateau with increasing economic activities. However, studies concerning the driving factors affecting the presence of these surface soil MPs for the typical regions with different geographic conditions are still lacking. Here we chose three representative regions (Ali, Yushu, and Haixi) from east to west across the plateau to investigate the distribution and further explore the contributing factors of surface soil MPs. The Spearman rank correlation, Geodetector, Random Forest Regression and Principal Component Analysis were used to unveil how the driving factors influence MPs distribution across the plateau. The results revealed that the MPs abundance, type, size, color and polymer across the Ali, Yushu, and Haixi were different. Microplastic abundance was inversely correlated with the distance from roads and residential areas, but was positively related to precipitation. Moreover, traffic elements were the primary source of MPs pollution in the Ali and Yushu but residential activities were the leading source of MPs contamination in the Haixi. Besides, backward trajectory simulations suggested that atmospheric transport may also contribute to the presence of soil MPs in the representative regions. These results further indicated that different regions may require different measures for controlling MPs pollution in surface soil. This study provides new insights into the distribution and source of MPs and further offers valuable methodology for future research aimed at uncover driving factors contributing MPs pollution across different regions with various geographical conditions.

High-altitude aquatic ecosystems offer faster aging rate of plastics

While research on the aging behavior of plastics in aquatic systems is extensive, studies focusing on high-altitude ecosystems, characterized by higher solar radiation and lower temperatures, remain limited. This study investigated the long-term aging behavior of non-biodegradable plastics (non-BPs), namely polyethylene terephthalate (PET) and polypropylene (PP) and biodegradable plastics (BPs), specifically polylactic acid plus polybutylene adipate-co-terephthalate (PLA + PBAT) and starch-based plastic (SBP), in a tributary of the Yarlung Zangbo River on the high-altitude Tibetan Plateau. Over 84 days of field aging, all four types of plastics exhibited initial rapid aging followed by deceleration. This aging process can be divided into two phases: rapid surface oxidation aging and an aging plateau phase. Notably, PP aged at a rate comparable to BPs, contrary to expectations of faster aging for BPs. Compared to low-altitude aquatic ecosystems, plastics in this study showed a faster aging rate. This was primarily due to intense ultraviolet radiation causing severe photoaging. Furthermore, the lower temperatures contributed to the formation of thinner biofilms. These thinner biofilms exhibited a reduced capacity to block light, further exacerbating the photoaging process of plastics. Statistical analysis results indicated that temperature, total nitrogen TN, and total phosphorus TP were likely the main water quality parameters influencing plastic aging. The varying effects of water properties and nutrients underscore the complex interaction of water quality parameters in high-altitude environments. Given the delicate nature of the high-altitude environment, the environmental impact of plastics, especially BPs, warrants careful consideration.

Microplastic assessment in remote and high mountain lakes of Gilgit Baltistan, Pakistan

Microplastic (MP) pollution is a critical environmental challenge worldwide, however limited research is reported in remote lakes of Pakistan. This study assessed MPs (>5 mm) prevalence, distribution and risk perspective in water and sediment of eight remote and high-altitude lakes (>1500 m above sea level) of Gilgit Baltistan, Pakistan. The lakes exhibited an average abundance of 152.6 ± 104.6 to 12.1 ± 7 MP/kg of dry sediments and 2 ± 0.9 to 17.1 ± 17.2 MP/L of surface water. MPs <200 μm dominated in both matrices. Surface water predominantly contained polyester and polypropylene, while polypropylene and polyethylene dominated in sediments. The gradient of elevation did not show any pronounced impact on the fiber loading or MP count in both matrices. Backward air mass trajectory revealed that air masses vastly travelled from western-Asia, Arabian sea and Bay of Bengal with an average transmission distance of 2500-3500 km (500 m a.s.l) that can be a potential deposition MP source in the area. Pollution Load Index of the lakes were >1 exhibiting pollution. All other lakes except Batura and Borith manifested a moderate hazard index. Naltar lake along with aforementioned two lakes also manifested high polymer toxicity. Further research should emphasize understanding the mechanisms and biotic interactions in high-mountain ecosystems.

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Hotspots lurking underwater: Insights into the contamination characteristics, environmental fates and impacts on biogeochemical cycling of microplastics in freshwater sediments

The widespread presence of microplastics (MPs) in aquatic environments has become a significant concern, with freshwater sediments acting as terminal sinks, rapidly picking up these emerging anthropogenic particles. However, the accumulation, transport, degradation and biochemical impacts of MPs in freshwater sediments remain unresolved issues compared to other environmental compartments. Therefore, this paper systematically revealed the spatial distribution and characterization information of MPs in freshwater (rivers, lakes, and estuaries) sediments, in which small-size (<1 mm), fibers, transparent, polyethylene (PE), and polypropylene (PP) predominate, and the average abundance of MPs in river sediments displayed significant heterogeneity compared to other matrices. Next, the transport kinetics and drivers of MPs in sediments are summarized, MPs transport is controlled by the particle diversity and surrounding environmental variability, leading to different migration behaviors and transport efficiencies. Also emphasized the spatio-temporal evolution of MPs degradation processes and biodegradation mechanisms in sediments, different microorganisms can depolymerize high molecular weight polymers into low molecular weight biodegradation by-products via secreting hydrolytic enzymes or redox enzymes. Finally, discussed the ecological impacts of MPs on microbial-nutrient coupling in sediments, MPs can interfere with the ecological balance of microbially mediated nutrient cycling by altering community networks and structures, enzyme activities, and nutrient-related functional gene expressions. This work aims to elucidate the plasticity characteristics, fate processes, and potential ecological impact mechanisms of MPs in freshwater sediments, facilitating a better understanding of environmental risks of MPs in freshwater sediments.

Prevailing wind patterns influence the distribution of plastics in small urban lakes

Cities generate large amounts of plastic waste and thus are often major sources of plastic pollution. Microplastics (particles < 5 mm) are a growing ecological concern as they are readily transported through the environment by wind, flowing water, and other transport processes. Here, we report the findings of an intensive field study that tested associations between prevailing winds and the distribution of plastic pollution around urban lakes (n = 20 lakes) in offshore sediments, shoreline sediments, and surface waters. We tested and found support for the hypothesis that prevailing winds influence the distribution of plastics around lakes. Overall, lakes had greater proportions of macroplastics (i.e., large plastic trash) and microplastics in sediments collected along northern lake shorelines. Notably, we found that macroplastic trash and total microplastics were, respectively, 1.7 and 3 times more abundant in sediments sampled along northern shorelines. Contrary to our expectation, we also found that microplastics in offshore sediments were in greater proportions along western lake shorelines, indicating that wind-driven processes might not explain the distribution of plastics in all lake zones. Furthermore, we observed no discernable patterns within lake surface waters and only captured a handful of suspended microplastic fragments and films from the water column. Overall, our findings revealed that the heterogeneous accumulation of plastic pollution at a lake is influenced, in part, by wind-driven processes. Moreover, these patterns extend across a network of lakes that were distributed across an urbanized landscape.

Microplastics pollution in the Asian water tower: Source, environmental distribution and proposed mitigation strategy

Microplastics generated from fragmentation of leftover plastics and industrial waste has reached in the remotely located Asian water tower (AWT) region, the 3rd pole of earth and origin site of several freshwater rivers. The accumulation of microplastics in AWT ecosystem has potential to alter the climatic condition contributing in global warming and disturbing the biodiversity structural dynamics. The present paper provides a comprehensive critical discussion over quantitative assessment of microplastics in different ecosystems (i.e. river, lakes, sediment and snow or glacier) of AWT. The hydrodynamic fate and transport of microplastics and their ecological impact on hydromorphology and biodiversity of AWT has been exemplified. Furthermore, key challenges, perspectives and research directions are identified to mitigate microplastics associated problems. During survey, the coloured polyethylene and polyurethane fibers are the predominant microplastics found in most areas of AWT. These bio-accumulated MPs alter the rhizospheric community structure and deteriorate nitrogen fixation process in plants. Significance in climate change, MPs pollution is enhancing the emissions of greenhouse gases (NH3 by ∼34% and CH4 by ∼9%), contributing in global warming. Considering the seriousness of MPs pollution, this review study can enlighten the pathways to investigate the effect of MPs and to develop monitoring tools and sustainable remediation technologies with feasible regulatory strategies maintaining the natural significance of AWT region.

Non-negligible impact of microplastics on wetland ecosystems

There has been much concern about microplastic (MP) pollution in marine and soil environments, but attention is gradually shifting towards wetland ecosystems, which are a transitional zone between aquatic and terrestrial ecosystems. This paper comprehensively reviews the sources of MPs in wetland ecosystems, as well as their occurrence characteristics, factors influencing their migration, and their effects on animals, plants, microorganisms, and greenhouse gas (GHG) emissions. It was found that MPs in wetland ecosystems originate mainly from anthropogenic sources (sewage discharge, and agricultural and industrial production) and natural sources (rainfall-runoff, atmospheric deposition, and tidal effects). The most common types and forms of MPs identified in the literature were polyethylene and polypropylene, fibers, and fragments. The migration of MPs in wetlands is influenced by both non-biological factors (the physicochemical properties of MPs, sediment characteristics, and hydrodynamic conditions) and biological factors (the adsorption and growth interception by plant roots, ingestion, and animal excretion). Furthermore, once MPs enter wetland ecosystems, they can impact the resident microorganisms, animals, and plants. They also have a role in global warming because MPs act as unique exogenous carbon sources, and can also influence GHG emissions in wetland ecosystems by affecting the microbial community structure in wetland sediments and abundance of genes associated with GHG emissions. However, further investigation is needed into the influence of MP type, size, and concentration on the GHG emissions in wetlands and the underlying mechanisms. Overall, the accumulation of MPs in wetland ecosystems can have far-reaching consequences for the local ecosystem, human health, and global climate regulation. Understanding the effects of MPs on wetland ecosystems is essential for developing effective management and mitigation strategies to safeguard these valuable and vulnerable environments.

Assessment of Microplastics and Potentially Toxic Elements in Surface Sediments of the River Kelvin, Central Scotland, United Kingdom

Contamination of the environment by microplastics (MPs), polymer particles of <5 mm in diameter, is an emerging concern globally due to their ubiquitous nature, interactions with pollutants, and adverse effects on aquatic organisms. The majority of studies have focused on marine environments, with freshwater systems only recently attracting attention. The current study investigated the presence, abundance, and distribution of MPs and potentially toxic elements (PTEs) in sediments of the River Kelvin, Scotland, UK. Sediment samples were collected from eight sampling points along the river and were extracted by density separation with NaCl solution. Extracted microplastics were characterised for shape and colour, and the polymer types were determined through attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. Pollution status and ecological risks were assessed for both the microplastics and PTEs. Abundance of MPs generally increased from the most upstream location (Queenzieburn, 50.0 ± 17.3 particles/kg) to the most downstream sampling point (Kelvingrove Museum, 244 ± 19.2 particles/kg). Fibres were most abundant at all sampling locations, with red, blue, and black being the predominant colours found. Larger polymer fragments were identified as polypropylene and polyethylene. Concentrations of Cr, Cu, Ni, Pb and Zn exceeded Scottish background soil values at some locations. Principal component and Pearson's correlation analyses suggest that As, Cr, Pb and Zn emanated from the same anthropogenic sources. Potential ecological risk assessment indicates that Cd presents a moderate risk to organisms at one location. This study constitutes the first co-investigation of MPs and PTEs in a river system in Scotland.

Microplastics in Qinghai-Tibet Plateau and Yunnan-Guizhou Plateau lakes, China

As an emerging environmental pollutant, microplastics (MPs) have received widespread attention. Recently, studies examining microplastic pollution in plateau lakes have been increasing, but few have examined the distributions, sources, and fates of MPs in different plateau areas. In this work, the abundances and characteristics of MPs in surface waters and sediments in lakes of the Qinghai-Tibet Plateau (QTP) and Yunnan-Guizhou Plateau (YGP) were systematically investigated. The abundances of MPs in the lakes of the QTP ranges within 0.05-1.8 n/L in surface waters and 10-2643.7 n/kg in sediments. In the lakes of the YGP, the abundances of MPs ranged within 1.3-10.1 n/L in surface waters and 171.7-4260 n/kg in sediments. The dominant shape, color, and size class of MPs were fiber, transparent, and 0-0.5 mm in plateau lakes, respectively. MPs were mainly composed of polypropylene, polyethylene, and polyethylene terephthalate polymers. The different sources of MPs in the QTP and YGP lakes were mainly due to differences in human activities. The primary sources of microplastic pollution in the lakes of the QTP were tourism and atmospheric transport, while sewage discharge, agriculture, and fishing activities were the main sources of MPs in urban lakes of the YGP. Although the level of microplastic pollution in plateau lakes was relatively low, the sources should be identified and monitored so that the effects and extent of microplastic pollution in these fragile environments can be fully understood. This study provides a valuable dataset and theoretical basis for subsequent research on microplastic pollution in plateau lakes.

Effects of lakeshore landcover types and environmental factors on microplastic distribution in lakes on the Inner Mongolia Plateau, China

Microplastic pollution in freshwater environments has received increasing attention. However, limited research on the occurrence and distribution of microplastics in plateau lakes. This study investigated the microplastic characteristics and influencing factors in lakes with different land cover types on the Inner Mongolia Plateau. Results showed that microplastic abundance ranged from 0.5 to 12.6 items/L in water and 50-325 items/kg in sediments. Microplastics in water were predominantly polypropylene (50.5%), fragments (40.5%), and 50-200 µm (66.7%). High-density (27.9%), fibrous (69.3%), and large-sized microplastics (47.7%) were retained primarily in lake sediments. The highest microplastic abundance in water was found in cropland lakes and grassland lakes, while that in sediments was in descending order of desert lakes > cropland lakes > grassland lakes > forest-grassland lakes. Differences among lake types suggest that agriculture, tourism, and atmospheric transport may be critical microplastic sources. Microplastic distribution was positively correlated with farmland and artificial surface coverage, showing that land cover types related to human activities could exacerbate microplastic pollution in lakes. Redundancy analysis showed that ammonia nitrogen and pH were the key physicochemical factors affecting microplastic distribution in lakes, indicating the potential sources of microplastics in lakes and the uniqueness of microplastic occurrence characteristics in desert saline-alkaline lakes, respectively.

Temporal and spatial variation of microplastics in the urban rivers of Harbin

This study was to investigate temporal and spatial variation of microplastics in surface water and sediment in the urban rivers of Harbin during dry and wet season. Water samples (n = 25) in Xinyi River (n = 13) and Ashe River (n = 12) were collected from the selected sampling points. Microplastics in urban rivers in Harbin included polyethylene (PE), polypropylene (PP), polystyrene (PS), polyamide (PA), polyvinyl chloride (PVC) and polyethylene terephthalate (PET). The results show that urban rivers in Harbin had relatively mild microplastic abundance with most fragments in shape and colorless in color. PP and PE were the major polymers in surface water samples, while PVC and PET were the major polymers in sediment, which were dominated by large-size and granulate shape microplastics. Source apportionment demonstrate that the main sources of microplastics in Xinyi River and Ashe River during dry season were domestic wastewater and effluent from rainfall, while the main sources of microplastics in Xinyi River and Ashe River during wet season were wastewater, atmospheric sedimentation, and agricultural source. The morphology of microplastics in surface water and sediment in urban rivers of Harbin was negatively correlated with water velocity and positively correlated with the concentration of suspended matter, dissolved oxygen, and conductivity. Riparian vegetation on the sides of Xinyi and Ashe River decreased migration process of microplastics by vegetal purification and then resulted in low abundance of microplastics. In conclusion, this study highlighted the occurrence characteristics, source apportionment and environmental influencing factors of microplastics in urban rivers of Harbin, which may develop new insights into the reduction of abundance of microplastics in the urban rivers.

Microplastic pollution characteristics and its future perspectives in the Tibetan Plateau

Microplastics are an emerging and persistent pollutant due to their threat to global ecological systems and human health. Recent studies showed that microplastics have infiltrated the remote Third Pole - the Tibetan Plateau. Here, we summarize the current evidence for microplastic pollution in the different environments (rivers/lakes, sediment, soil, ice/snow and atmosphere) of the Tibetan Plateau. We assess the spatial distribution, source, fate, and potential ecological effects of microplastics in this broad plateau. The integrated results show that microplastics were pervasive in biotic and abiotic components of the Tibetan Plateau, even at the global highest-altitude, Mt. Everest. Although the concentration of microplastics in the Tibetan Plateau was far below that found in the densely populated lowlands, it showed a higher concentration than that in the ocean system. Tourist populations are identified as a substantial source of anthropogenic plastic input rather than local residents due to the rapid development of the tourism industry. In the sparsely inhabited remote area of the Tibetan Plateau, long-range atmospheric transport facilitates allochthonous microplastic diffusion. Robust solar radiation in the Tibetan Plateau might enhanced production of secondary microplastics by weathering (UV-photooxidation) of abandoned plastic waste. A rough estimation showed that the microplastic export flux from melting glaciers was higher than that measured in most of the world's largest rivers, which affects local and downstream areas. Since the Tibetan Plateau is vital for Asian water supply and numerous endangered wildlife, the potential human and ecological risk of microplastics to these fragile ecosystems needs to be fully evaluated within the context of climate-change impacts.

The pollution of microplastics in sediments: The ecological risk assessment and pollution source analysis

The occurrence of microplastics (MPs) pollution in sediments has brought huge challenges to the development of society. Pollution control of MPs in sediments has become an inevitable requirement for current society. This requires implementing targeted pollution control measures in high MPs ecological risk areas and controls MPs discharge in pollution source. Existing studies lack in-depth understanding in MPs ecological risk assessment and MPs pollution source analysis, this limits the pollution control of MPs in sediments. In this study, the studies of MPs pollution in sediments from 2013 to 2022 were reviewed. The results showed that the environmental problems caused by MPs pollution in marine sediments have been widely discussed over the past decade. And the occurrence of MPs pollution in sediments brought potential threat to marine ecology and human food supply. Furthermore, pollution load index, polymer risk index and potential ecological risk index of MPs were frequently used in the existing ecological risk assessment of MPs in sediments. A large amount of monitoring data and simulation data is conducive to improving these MPs ecological risk assessment indicators. This can provide a useful reference for managers to formulate MPs pollution control measures. And MPs types and land-use types can provide basis to analyze the pollution source of MPs in sediments. Developing more accurate MPs detection and analysis technologies can further improve current MPs pollution source analysis system. This is conducive to control the discharge of MPs in the pollution source. In future studies, more complete MPs ecological risk assessment system and MPs pollution source analysis system should be established to control the pollution of MPs in sediments.

The sustainable management of microplastics pollution in sediments from China: Promulgating relevant laws and implementing targeted management

Microplastics (MPs) pollution in sediments brings a huge challenge to the sustainable development of society. China is one of the countries with the largest production and application of plastic products in the world. The sustainable management of MPs pollution in sediments from China has important implications for achieving the United Nations Sustainable Development Goals. There is a lack of targeted management measures for the sustainable management of MPs pollution in sediments from China. In this study, 74 study areas were collected to analyze the pollution status of MPs in sediments from China. The results showed that the study on MPs pollution in sediments from China was concentrated in the Bohai Rim Economic Circle (n = 12), the Yangtze River Delta Economic Circle (n = 16) and the Pearl River Delta Economic Circle (n = 13). And the average abundance of MPs in sediments from China showed a decreasing trend from coastal to inland. Fiber had the highest centrality degree in the correlation network of MPs types. The reduction of fiber in sediments can reduce the diversity of MPs in sediments from China. Population density, economic level, urbanization level and industrial structure were significantly correlated with MPs types in sediments from China. The targeted management measures can be formulated based on the contribution of different human activities to MPs types. Managing pollution sources and cutting off transmission pathways are effective means for the targeted management of MPs in sediments. In addition, legislation can effectively restrict the application of plastic products. Promulgating relevant laws and implementing targeted management are conducive to the sustainable management of MPs pollution in sediments from China. In future studies, a big data platform for MPs pollution should be established to obtain a comprehensive understanding in the pollution status of MPs in sediments from China.

Microplastic in the Baltic Sea: A review of distribution processes, sources, analysis methods and regulatory policies

Microplastics pollution is an issue of great concern for scientists, governmental bodies, ecological organisations, and the general public. Microplastics pollution is widespread and is a great environmental problem on account of its potential toxicity for marine biota and human health. Today, almost all the world's seas and oceans are polluted with microplastics. The Baltic Sea is a semi-enclosed reservoir of brackish water and is a hotspot for contamination in terms of eutrophication and the presence of organic matter. Microplastics are quite intense, based on data from studies of marine litter and microplastics in the Baltic Sea. The number of microplastics in the Baltic Sea water is 0.07-3300 particles/m³, and in sediments 0-10179 particles/kg. These amounts prove that the waters and sediments of the Baltic Sea are heavily contaminated with microplastics. This article provides a comprehensive review of the microplastic origins and transport routes to the Baltic Sea. The data is presented as the concentration of microplastics in surface waters, sediments, and sea sand. The extraction methods used and the microplastics techniques are also presented. The possibilities and limitations of water and sediment sampling methods for microplastics determination were summarised, taking into account sampling tools, volume and depth. Extraction, separation, filtration, and visual sorting are outlined as sample preparation techniques for microplastic analysis. This review also focuses on the problems of obtaining data relevant to the development of the mathematical models necessary to monitor trends in the spread of microplastics in the Baltic Sea. Finally, several important laws and policies, which are in place in the Baltic States to control and manage microplastic pollution in the region, are highlighted.

A case study of distribution and characteristics of microplastics in surface water and sediments of the seas around Shenzhen, southern coastal area of China

Microplastics (MPs), known to cause environmental pollution, is attracting a growing attention worldwide owing to their extensive existence and potential risks to biota. The marginal sea areas are suspected to be especially susceptible to MPs pollution. Unfortunately, data on MPs in the surface water and sediments ecosystems are still limited, particularly in the southern coastal areas of China. The study was successfully utilized to explore the distribution and characteristics of MPs below 5 mm collected from 14 sites in the seas around Shenzhen, a typical special economic zone of China. MPs were detected in both surface water and sediments with concentrations ranging from 3.8 to 7.8 items per liter and 2.6 × 10³ to 10.0 × 10³ items per kilogram, respectively. The highest abundance of MPs appeared in S5/S9 and S14 in surface water and sediments, respectively. Fiber and film with small particle size (<0.5 mm) were identified as typical and abundant MPs type among all samples. In addition, polyethylene (PE) was considered as dominant forms of MPs in surface water and sediment samples. Results from this study indicated a positive correlation with abundance of MPs and urbanization rate, which also showed an evident difference of MPs in different urban functional areas. Based on the types and quantity of detected MPs, we assessed the risk of MPs pollution in this study area, and the ecological risk category of MPs was at a high level. Importantly, our work might be employed as a potential information so as to better understand MPs pollution, source tracing and ecological risk assessment, which enhances the possibility of achieving effective control and supervision of MPs pollution in southern coastal aera of China.

Microplastics distribution in different habitats of Ximen Island and the trapping effect of blue carbon habitats on microplastics

Sediments are considered to be important sinks of microplastics, but the enrichment process of microplastics by blue carbon ecosystems is poorly studied. This study analyzed the spatial distribution and temporal changes, assessed the polymer types and morphological characteristics of microplastics in sediments of five ecosystems, i.e. forests, paddy fields, mangroves, saltmarshes and bare beaches on Ximen Island, Yueqing Bay, China. The trapping effect of blue carbon (mangrove and saltmarsh) sediments on microplastic was further explored. Temporal trends in microplastic abundance showed a significant increase over the last 20 years, with the enrichment of microplastics in mangrove and saltmarsh sediments being 1.7 times as high as that in bare beach, exhibiting blue carbon vegetations have strong enrichment effect on microplastics. The dominant color, shape, size, and polymer type of microplastics in sediments were transparent, fibers and fragments, <1 mm, and polyethylene, respectively. Significant differences in the abundance and characteristics of microplastics between intertidal sediments and terrestrial soils reveal that runoff input is the main source of microplastics. This study provided the evidence of blue carbon habitats as traps of microplastics.