Green walls with recycled filling media to treat greywater

Nutrient treatment of greywater in green wall systems: A critical review of removal mechanisms, performance efficiencies and system design parameters

Greywater has lower pathogen and nutrient levels than other mixed wastewaters, making it easier to treat and to reuse in nature-based wastewater treatment systems. Green walls (GWs) are one type of nature-based solutions (NBS) that are evolving in design to support on-site and low-cost greywater treatment. Greywater treatment in GWs involves interacting and complex physical, chemical, and biological processes. Design and operational considerations of such green technologies must facilitate these pivotal processes to achieve effective greywater treatment. This critical review comprehensively analyses the scientific literature on nutrient removal from greywater in GWs. It discusses nutrient removal efficiency in different GW types. Total nitrogen removal ranges from 7 to 91% in indirect green facades (IGF), 48-93% for modular living walls (MLW), and 8-26% for continuous living walls (CLW). Total phosphorus removal ranges from 7 to 67% for IGF and 2-53% for MLW. The review also discusses the specific nutrient removal mechanisms orchestrated by vegetation, substrates, and biofilms to understand their role in nitrogen and phosphorus removal within GWs. The effects of key GW design parameters on nutrient removal, including substrate characteristics, vegetation species, biodegradation, temperature, and operating parameters such as irrigation cycle and hydraulic loading rate, are assessed. Results show that greater substrate depth enhances nutrient removal efficiency in GWs by facilitating efficient filtration, straining, adsorption, and various biological processes at varying depths. Particle size and pore size are critical substrate characteristics in GWs. They can significantly impact the effectiveness of physicochemical and biological removal processes by providing sufficient pollutant contact time, active surface area, and by influencing saturation and redox conditions. Hydraulic loading rate (HLR) also impacts the contact time and redox conditions. An HLR between 50 and 60 mm/d during the vegetation growing season provides optimal nutrient removal. Furthermore, nutrient removal was higher when watering cycles were customized to specific vegetation types and their drought tolerances.

Greywater treatment in a green wall using different filter materials and hydraulic loading rates

Green walls in urban environments can be both an aesthetic feature and be of practical use in greywater treatment. This study evaluates the effect of different loading rates (4.5 l/d, 9 l/d, and 18 l/d) on the efficiency of treating actual greywater from a city district in a pilot-scale green wall with five different filter materials as substrates (biochar, pumice, hemp fiber, spent coffee grounds (SCG), and composted fiber soil (CFS)). Three cool climate plant species, Carex nigra, Juncus compressus, and Myosotis scorpioides, were chosen for the green wall. The following parameters were evaluated: biological oxygen demand (BOD), fractions of organic carbon, nutrients, indicator bacteria, surfactants, and salt. Three of the five materials investigated - biochar, pumice, and CFS - showed promising treatment efficiencies. The respective overall reduction efficiencies of BOD, total nitrogen (TN) and total phosphorus (TP) were 99%, 75%, and 57% for biochar; 96%, 58%, and 61% for pumice; and 99%, 82% and 85% for CFS. BOD was stable in the biochar filter material with effluent concentrations of 2 mg/l across all investigated loading rates. However, higher loading rates had a significantly negative effect on hemp and pumice for BOD. Interestingly, the highest loading rate (18 l/d) flowing over pumice removed the highest levels of TN (80%) and TP (86%). Biochar was the most effective material in removing indicator bacteria, with a 2.2-4.0 Log₁₀ reduction for E. coli and enterococci. SCG was the least efficient material, giving a higher BOD in the effluent than in the influent. Therefore, this study presents the potential of natural and waste-derived filter materials to treat greywater effectively and the results can contribute to the future development of nature-based greywater treatment and management practices in urban areas.