The synergistic effect of chemical oxidation and microbial activity on improving volatile fatty acids (VFAs) production during the animal wastewater anaerobic digestion process treated with persulfate/biochar

Partially replacing dietary starch with soybean oil improved production performance of weaned Rex rabbits

The differences between the high-starch diet commonly used in rabbit farming and the natural feeding habits of rabbits may pose certain health risks. In our study, we replaced part of the starch in the feed with soybean oil and conducted a 4-wk feeding trial with weaned Rex rabbits. The results indicated that rabbits fed the oil-supplemented diet had a lower incidence of diarrhea, improved growth performance, and higher feed conversion efficiency, along with increased absorptive capacity of small intestine. Additionally, the composition of the cecal contents and fermentation patterns were altered; the concentration of ammonia in the cecum and the proportion of acetate among volatile fatty acids decreased, while the proportion of butyrate increased. Furthermore, the concentration of ammonia nitrogen in the cecum decreased, along with reductions in hepatic urea synthesis activity and urinary nitrogen excretion. These findings suggest that replacing part of the dietary starch with oil can enhance the production efficiency of Rex rabbits.

Improved volatile fatty acid production in anaerobic digestion via simultaneous temperature regulation and persulfate activation by biochar: Chemical and biological response mechanisms

Increasing volatile fatty acid (VFA) production via persulfate activation (i.e., chemical effect) in anaerobic digestion (AD) is an emerging resource utilization method. However, the reaction mechanisms responsible for improving VFA production in AD via simultaneous temperature regulation and persulfate activation by biochar remain unclear. In this study, three PB15 treatment systems of low temperature (15 °C), medium temperature (35 °C) and high temperature (55 °C) were set to explore the relationship between VFAs production and treatment temperature and the influence of temperature on the reaction mechanism. The results show that the improvement of hydrolysis and acidification efficiency of the system in the medium temperature system is the highest. The VFA yield and acid production rate in the treatment group at 35 °C were 2.49 and 5.22 times higher than those in the control group, respectively. The chemical effect effectively initiated the anaerobic acid production process and maintained the dominant role of the biological effect. The activity of persulfate is too low at low temperature, and its decomposition is too fast at high temperature. Plenty of free radicals lead to enhanced oxidation of the system, which may kill the fermentation bacteria. The NCM model indicates that microbial stability is reduced in high temperature systems. The SEM model showed that temperature change mainly affected substrate degradation by hydrolytic bacteria and indirectly affected acid production by acid-producing bacteria. This study provides a new strategy for realizing pollutant recycling and increasing VFAs production in cold area.

Anode potential regulates gas composition and microbiome in anaerobic electrochemical digestion

Anaerobic electrochemical digestion (AED) is an effective system for recovering biogas from organic wastes. However, the effects of different anode potentials on anaerobic activated sludge remain unclear. This study confirmed that biofilms exhibited the best electroactivity at -0.2 V (vs. Ag/AgCl) compared to -0.4 V and 0 V. Gas was further regulated, with the highest hydrogen content (47 ± 7 %) observed at -0.2 V. The 0 V system produced the largest amount of methane (70 ± 8 %) and exhibited the greatest presence of hydrogen-utilizing microorganisms. The gas yield at -0.4 V was the lowest, with no hydrogen detected. Excess bioelectrohydrogen at -0.2 V and 0 V caused the co-enrichment of Methanobacterium and Acetoanaerobium, establishing a thermodynamically feasible current-acetate-hydrogen electron cycle to improve electrogenesis. These results provide insights into the regulatory strategies of MEC technology during anaerobic digestion, which play a decisive role in determining the composition of biogas.

Subtle magnesium liberation of self-fabricated functional filler actuates highly efficient phosphorus removal from source-separated urine by SBBR

Domestic wastewater source-separated treatment has attracted wide attention due to the efficiency improvement of sewage treatment systems, energy saving, resource reuse, and the construction and operation cost saving of pipeline networks. Nonetheless, the excess source-separated urine still demands further harmless treatment. Sequencing batch biofilm reactor (SBBR), a new type of composite biofilm reactor developed by filling different fillers into the sequential batch reactor (SBR) reactor, has higher pollutant removal performance and simpler operation and maintenance. However, the phosphorus removal ability of the SBBR filling with conventional fillers is still limited and needs further improvement. In this study, we developed two new fillers, the self-fabricated filler A and B (SFA/SFB), and compared their source-separated urine treatment performance. Long-term treatment experimental results demonstrated that the SBBR systems with different fillers had good removal performance on the COD and TN in the influent, and the removal rate increased with the increasing HRT. However, only the SBBR system with the SFA showed excellent PO43--P and TP removal performance, with the removal rates being 83.7 ± 11.9% and 77.3 ± 13.7% when the HRT was 1 d. Microbial community analysis results indicated that no special bacteria with strong phosphorus removal ability were present on the surface of the SFA. Adsorption experimental results suggested that the SFA had better adsorption performance for phosphorus than the SFB, but it could not always have stronger phosphorus adsorption and removal performance during long-term operation due to the adsorption saturation. Through a series of characterizations such as SEM, XRD, and BET, it was found that the SFA had a looser structure due to the use of different binder and production processes, and the magnesium in the SFA gradually released and reacted with PO43- and NH4+ in the source-separated urine to form dittmarite and struvite, thus achieving efficient phosphorus removal. This study provides a feasible manner for the efficient treatment of source-separated urine using the SBBR system with self-fabricated fillers.

Evaluation of volatile fatty acids and ammonia recovery approach from landfill leachate using pilot-scale mechanical vapor recompression

Treatment of landfill leachate is still a current problem due to the high treatment costs in addition to the difficulty of meeting the discharge criteria. However, there is a more important issue that should be underlined; it is also valuable compounds that leachate contains. Conventional methods used for treatment of leachate such as membrane filtration, advanced oxidation processes, biological processes and their combinations have largely focused on treatment. However, the recovery of ammonia and volatile organic acids (VFA) in leachate is a promising approach both to overcome high treatment costs and to sustainably manage leachate. In this study, leachate treatment potential was investigated by mechanical vapor recompression (MVR) process, which offers an operational opportunity to recover high value-added products from leachate while providing an effective treatment for wastewater. Optimum operating conditions for the pilot-scale MVR process have been determined by laboratory-scale studies. VFAs were recovered as organic acid salts from the pilot-scale MVR distillate, while ammonia recovery was accomplished as ammonium sulfate from a highly contaminated concentrate stream. VFA and ammonia recovery rates were 89% and 99%, respectively. The treatment cost of leachate with MVR process was calculated according to the data obtained in pilot scale MVR studies considering the operating cost, chemical cost and economical contribution of value-added products. The results showed that the integrated MVR-crystallization process, all treatment costs are covered, with a net gain of 3.8 USD/m3. Consequently, MVR integrated crystallization process offers an economical and sustainable solution for the treatment of leachate by recovering valuable products.

Biochar applications in microbial fermentation processes for producing non-methane products: Current status and future prospects

The objective of this review is to encourage the technical development of biochar-assisted microbial fermentation. To this end, recent advances in biochar applications for microbial fermentation processes (i.e., non-methane products of hydrogen, acids, alcohols, and biofertilizer) have been critically reviewed, including process performance, enhanced mechanisms, and current research gaps. Key findings of enhanced mechanisms by biochar applications in biochemical conversion platforms are summarized, including supportive microbial habitats due to the immobilization effect, pH buffering due to alkalinity, nutrition supply due to being rich in nutrient elements, promoting electron transfer by acting as electron carriers, and detoxification of inhibitors due to high adsorption capacity. The current technical limitations and biochar's industrial applications in microbial fermentation processes are also discussed. Finally, suggestions like exploring functionalized biochar materials, biochar's automatic addition and pilot-scale demonstration are proposed. This review would further promote biochar applications in microbial fermentation processes for the production of non-methane products.