Effects of plastisphere on phosphorus availability in freshwater system: Critical roles of polymer type and colonizing habitat

Bipartite trophic levels cannot resist the interference of microplastics: A case study of submerged macrophytes and snail

Some studies frequently focus on the toxic effects of compound pollution formed by microplastics and other pollutants on individual organisms, but it is still unclear how multi-trophic level organisms in compound communities resist the stress of microplastics. Thus, this research used a dose-response experiment (0, 0.1, 0.2, 0.5, 1 mg L-1) to illustrate the influences that microplastics might have on two symbiotic freshwater organisms Vallisneria natans and Sinotaia quadrata. The results showed the reduction of V. natans biomass in 0.5 and 1 mg L-1 groups (28-38 %), and disturbances on the photosynthetic system, reduced the chlorophyll content (15-85 %) and maximum quantum yields (10-31 %). In the case of S. quadrata, which subsisted by scraping leaf biofilms, there was a disruption in the functioning of the antioxidant system. Concurrently, the activities of digestive and neurotransmitter enzymes were affected, potentially leading to detrimental impacts on the organism's essential physiological processes. The introduction of microplastics significantly enhanced the relative abundance of specific microbial taxa, such as Proteobacteria within the biofilm of V. natans leaves and chloroflexi in the rhizosphere, thereby altering the microbial community assembly process. This means the potential ecological functions with microbes as the carrier was influenced. These results indicated that microplastic in aquatic environments can impact the metabolism, autotrophic, and heterotrophic behavior of double-end trophic organisms through symbiotic activities. Therefore, our study reveals how polystyrene microplastics affect the growth of submerged aquatic plants and snails, and from the perspective of community integrity and health, the introduction of these pollutants into freshwater environments may cause disruptive effects.

Long-term monitoring of biofilm succession unveils differences between biodegradable and conventional plastic materials

A vast amount of plastic waste enters the ocean every year and the Mediterranean Sea is particularly affected by this issue. Biodegradable polymers like poly(lactic acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), may help mitigate this problem. We investigated bacterial biofilm development and succession on these polymers over one year in the Western Mediterranean Sea. Scanning electron microscopy (SEM) and confocal laser scanning were used to examine microbial colonization and surface erosion, while bacterial community abundance and composition were assessed through culture plate counting and 16S rRNA gene amplicon sequencing. SEM revealed significant surface erosion on PHBV, indicative of microbial degradation, while PLA exhibited minor and irregular erosion. Culture-based quantification showed higher bacterial colonization on PHBV compared to PLA, suggesting that PHBV provides a more favourable surface for bacterial attachment Amplicon sequencing of the 16S rRNA gene revealed high bacterial diversity, with 17,781 operational taxonomic units across all samples. Proteobacteria, Bacteroidota, and Planctomycetota were the dominant phyla, with the Shannon index consistently exceeding 8, corroborating the bacterial diversity across all materials. Temporal shifts in bacterial community composition were significant, with exposure time explaining 29.8 % of the variation, suggesting biofilm succession as a key factor shaping microbial assemblages. While polymer type had a limited impact on bacterial composition, PHBV biofilms exhibited greater bacterial abundance and diversity compared to PLA. This study highlights PHBV's role in shaping biofilms and its relevance in assessing biodegradable plastics in marine environments. Understanding microbial interactions with bioplastics is crucial for evaluating their environmental impact and degradation dynamics.

A state-of-the-art review of environmental behavior and potential risks of biodegradable microplastics in soil ecosystems: Comparison with conventional microplastics

As the use of biodegradable plastics becomes increasingly widespread, their environmental behaviors and impacts warrant attention. Unlike conventional plastics, their degradability predisposes them to fragment into microplastics (MPs) more readily. These MPs subsequently enter the terrestrial environment. The abundant functional groups of biodegradable MPs significantly affect their transport and interactions with other contaminants (e.g., organic contaminants and heavy metals). The intermediates and additives released from depolymerization of biodegradable MPs, as well as coexisting contaminants, induce alterations in soil ecosystems. These processes indicate that the impacts of biodegradable MPs on soil ecosystems might significantly diverge from conventional MPs. However, an exhaustive and timely comparison of the environmental behaviors and effects of biodegradable and conventional MPs within soil ecosystems remains scarce. To address this gap, the Web of Science database and bibliometric software were utilized to identify publications with keywords containing biodegradable MPs and soil. Moreover, this review comprehensively summarizes the transport behavior of biodegradable MPs, their role as contaminant carriers, and the potential risks they pose to soil physicochemical properties, nutrient cycling, biota, and CO2 emissions as compared with conventional MPs. Biodegradable MPs, due to their great transport and adsorption capacity, facilitate the mobility of coexisting contaminants, potentially inducing widespread soil and groundwater contamination. Additionally, these MPs and their depolymerization products can disrupt soil ecosystems by altering physicochemical properties, increasing microbial biomass, decreasing microbial diversity, inhibiting the development of plants and animals, and increasing CO2 emissions. Finally, some perspectives are proposed to outline future research directions. Overall, this study emphasizes the pronounced effects of biodegradable MPs on soil ecosystems relative to their conventional counterparts and contributes to the understanding and management of biodegradable plastic contamination within the terrestrial ecosystem.

Characteristics of biofilms on polylactic acid microplastics and their inhibitory effects on the growth of rice seedlings: A comparative study of petroleum-based microplastics

Increasing evidence highlights the negative effects of microplastics (MPs) on crops and bio-based plastics offer an alternative to conventional plastics. However, there is limited knowledge on the impacts and mechanisms of bio-based MPs on crop physiology. In this study, bio-based polylactic acid (PLA) and petroleum-based MPs [polyamide (PA) and polypropylene (PP)] were added to hydroponic cultures planted with rice (Oryza sativa L.) seedlings to assess their toxicity. Compared to PA and PP MPs, PLA MPs experienced greater aging after 28 days of exposure, and their surfaces were loaded with more rod-shaped microorganisms with potential plastic degradation ability, such as Proteobacteria and Bacteroidota, which competed with rice seedlings for carbon and nitrogen sources for self-multiplication, thus altering the carbon fixation and nitrogen cycling processes during rice seedling growth. Down-regulation of amino acid and lipid metabolisms in the PLA treatment inhibited the normal synthesis of chlorophyll in rice seedling leaves. Consequently, decreases in the biomass and height of rice seedling roots and shoots were observed in the PLA MP treatment. This study provides evidence that bio-based MPs may have a more severe impact on crop growth than petroleum-based MPs.

Analysis of 16S rRNA amplicon data illuminates the major role of environment in determining the marine plastisphere microbial communities

Microplastics (MPs) are a potential threat to the marine environment and its associated ecosystem functions. Earlier investigations revealed that the microbiome plays a crucial role in deciding the fate of MPs in the environment. Further studies also highlighted the influences of environment and polymer types on the plastisphere microbiome. Nevertheless, the major factor that determines the plastisphere microbiome remains elusive. Thus, we examined the publicly available marine plastisphere data generated from polyethylene (PE), polypropylene (PP), and polystyrene (PS), collected from three different locations to identify the importance of environment and/or polymer types in shaping the microbiome. The beta diversity analyses showed a clear distinction between samples collected from different locations. The PERMANOVA results illustrated a significant influence of environment and sample type (control/PE/PP/PS) on the microbial communities. However, the influence of sample type on microbial diversity was not significant (P-value > 0.05) when the control samples were removed from the dataset but the environment remained a significant factor (P-value < 0.05). Further, the differential abundance analyses explicitly showed the abundance of many bacterial taxa to be significantly influenced (adjusted P-value < 0.05) by the locations rather than the polymer types. The validation analysis also supports the findings. Thus, this study suggests that both the surrounding environment and polymer types determine the microbial communities on marine MPs, but the role of the environment in shaping the microbial composition is greater than that of polymer types.

Insight into the bacterial community composition of the plastisphere in diverse environments of a coastal salt marsh

The microbial community colonized on microplastics (MPs), known as the 'plastisphere', has attracted extensive concern owing to its environmental implications. Coastal salt marshes, which are crucial ecological assets, are considered sinks for MPs. Despite their strong spatial heterogeneity, there is limited information on plastisphere across diverse environments in coastal salt marshes. Herein, a 1-year field experiment was conducted at three sites in the Yancheng salt marsh in China. This included two sites in the intertidal zone, bare flat (BF) and Spartina alterniflora vegetation area (SA), and one site in the supratidal zone, Phragmites australis vegetation area (PA). Petroleum-based MPs (polyethylene and expanded polystyrene) and bio-based MPs (polylactic acid and polybutylene succinate) were employed. The results revealed significant differences in bacterial community composition between the plastisphere and sediment at all three sites examined, and the species enriched in the plastisphere exhibited location-specific characteristics. Overall, the largest difference was observed at the SA site, whereas the smallest difference was observed at the BF site. Furthermore, the MP polymer types influenced the composition of the bacterial communities in the plastisphere, also exhibiting location-specific characteristics, with the most pronounced impact observed at the PA site and the least at the BF site. The polybutylene succinate plastisphere bacterial communities at the SA and PA sites were quite different from the plastispheres from the other three MP polymer types. Co-occurrence network analyses suggested that the bacterial community network in the BF plastisphere exhibited the highest complexity, whereas the network in the SA plastisphere showed relatively sparse interactions. Null model analyses underscored the predominant role of deterministic processes in shaping the assembly of plastisphere bacterial communities across all three sites, with a more pronounced influence observed in the intertidal zone than in the supratidal zone. This study enriches our understanding of the plastisphere in coastal salt marshes.

Microplastics alter the microbiota-mediated phosphorus profiles at sediment-water interface: Distinct microbial effects between sediment and plastisphere

Microplastics (MPs) are ubiquitous in freshwater sediments, raising concern about their potential impacts on ecosystem services. However, the specific impacts of microbiota mediated by MPs in sediment and plastisphere compartments on P availability remain elusive. This investigation conducted a series of microcosm experiments utilizing eutrophic lake sediment amended with fuel-based polyethylene terephthalate (PET), bio-based polylactic acid (PLA) MPs, and a natural cobblestone substrate to unravel their effects. The findings highlighted that MPs induced alterations in bacterial communities in both sediment and plastisphere, consequently modifying P availabilities at the sediment-water interface (SWI). In comparison to non-biodegradable PET, biodegradable PLA MPs presented higher proportions of specific bacteria and functional genes associated with P profiles, such as Firmicutes, Ignavibacteriota, and P mineralizing genes in the sediment and plastisphere. This, in turn, elevated the levels of soluble reactive P in the porewater by 54.19 % (0-1 cm), 55.81 % (1-3 cm), and 18.24 % (3-5 cm), respectively. Additionally, PLA obviously altered P immobilization capacity and bioavailability, increasing the organic P fraction. Whereas, inert cobblestone exhibited negligible influence on P biogeochemical processes during the incubation. Moreover, the biofilm communities and those in the surrounding sediment specifically contributed to the changes in P profiles at the SWI. The functional genes associated with P profiles in the sediment mainly concentrate on P mineralization and P uptake/transport. In the plastisphere, P activation genes are obviously affected under MP exposure. This study fills the knowledge gap concerning the repercussions of MPs on ecosystem services.

New insights into changes in phosphorus profile at sediment-water interface by microplastics: Role of benthic bioturbation

Microplastics (MPs) have attracted increasing attention due to their ubiquitous occurrence in freshwater sediments and the detrimental effects on benthic invertebrates. However, a clear understanding of their downstream impacts on ecosystem services is still lacking. This study examines the effects of bio-based polylactic acid (PLA), fuel-based polyethylene terephthalate (PET), and biofilm-covered PET (BPET) MPs on the bioturbator chironomid larvae (Tanypus chinensis), and the influence on phosphorus (P) profiles in microcosms. The changes in biochemical responses and metabolic pathways indicated that MPs disrupted energy synthesis by causing intestinal blockage and oxidative stress in T. chinensis, leading to energy depletion and impaired bioturbation activity. The impairment further resulted in enhanced sedimentary P immobilization. For larval treatments, the internal-P loadings were respectively 11.4%, 8.6%, and 9.0% higher in the PLA, PET, and BPET groups compared to the non-MP control. Furthermore, the influence of bioturbation on P profiles was MP-type dependent. Both BPET and PLA treatments displayed more obvious impacts on P profiles compared to PET due to the changes in MP bioavailability or sediment microenvironment. This study connects individual physiological responses to broader ecosystem services, showing that MPs alter P biogeochemical processes by disrupting the bioturbation activities of chironomid larvae.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Effects of environmental microplastic exposure on Chlorella sp. biofilm characteristics and its interaction with nitric oxide signaling

Microalgal biofilm is promising in simultaneous pollutants removal, CO2 fixation, and biomass resource transformation when wastewater is used as culturing medium. Nitric oxide (NO) often accumulates in microalgal cells under wastewater treatment relevant abiotic stresses such as nitrogen deficiency, heavy metals, and antibiotics. However, the influence of emerging contaminants such as microplastics (MPs) on microalgal intracellular NO is still unknown. Moreover, the investigated MPs concentrations among existing studies were mostly several magnitudes higher than in real wastewaters, which could offer limited guidance for the effects of MPs on microalgae at environment-relevant concentrations. Therefore, this study investigated three commonly observed MPs in wastewater at environment-relevant concentrations (10-10,000 μg/L) and explored their impacts on attached Chlorella sp. growth characteristics, nutrients removal, and anti-oxidative responses (including intracellular NO content). The nitrogen source NO3--N at 49 mg/L being 20 % of the nitrogen strength in classic BG-11 medium was selected for MPs exposure experiments because of least intracellular NO accumulation, so that disturbance of intracellular NO by nitrogen availability could be avoided. Under such condition, 10 μg/L polyethylene (PE) MPs displayed most significant microalgal growth inhibition comparing with polyvinyl chloride (PVC) and polyamide (PA) MPs, showing extraordinarily low chlorophyll a/b ratios, and highest superoxide dismutase (SOD) activity and intracellular NO content after 12 days of MPs exposure. PVC MPs exposed cultures displayed highest malonaldehyde (MDA) content because of the toxic characteristics of organochlorines, and most significant correlations of intracellular NO content with conventional anti-oxidative parameters of SOD, CAT (catalase), and MDA. MPs accelerated phosphorus removal, and the type rather than concentration of MPs displayed higher influences, following the trend of PE > PA > PVC. This study expanded the knowledge of microalgal biofilm under environment-relevant concentrations of MPs, and innovatively discovered the significance of intracellular NO as a more sensitive indicator than conventional anti-oxidative parameters under MPs exposure.

Effects of microplastic properties and dissolved organic matter on phosphorus availability in soil and aqueous mediums

Plastic mulching films and phosphate fertilizers have been widely used to improve agricultural soil productivity. Microplastics (MP) and phosphorus (P) significantly accumulate in agricultural soil and water bodies. However, the effects of residual MP on P availability in soil and aqueous mediums remain unclear. In this study, available P (Olsen-P) in soils and P adsorption capacity in aqueous medium were determined to examine the influence of MP properties on P availability in laboratory. In agricultural soils, Olsen-P was significantly affected by MP types. Conventional MP (mulching film particles), such as polyethylene (PE) and polyvinyl chloride (PVC), and biodegradable MP, such as polylactic acid (PLA), substantially reduced soil Olsen-P by 9.7-38.6% and 38.4-73.6%, respectively. The size and concentration of MP strongly affected soil Olsen-P, with smaller (25 μm) and more concentrated (5%) MP causing greater reductions in Olsen-P. In the soil contaminated with MP, increased fulvic acid content significantly increased Olsen-P levels. Microplastics exhibited strong P adsorption capacities, leading to decreased P availability in aqueous medium. Conventional MP exhibited a higher P adsorption capacity than biodegradable MP, with P distribution coefficients (Kd values) ordered as PVC (5.19 L kg-1) > PE (4.23 L kg-1) > PLA (2.48 L kg-1). Notably, the Kd values increased with decreasing sizes of conventional MP, whereas the opposite trend was observed for PLA. The presence of fulvic acid affected the adsorption of P by MP in aqueous medium. Increased fulvic acid content reduced P adsorption capacity of MP, thus enhancing P availability. Our findings contribute to a better understanding of P dynamics in MP-contaminated agricultural soil and aqueous medium, which could aid in formulating sustainable agricultural practices and effective environmental management strategies for plastic mulching films and P contamination.

A domesticated photoautotrophic microbial community as a biofilm model system for analyzing the influence of plastic surfaces on invertebrate grazers in limnic environments

The environmental fate of plastic particles in water bodies is influenced by microbial biofilm formation. Invertebrate grazers may be affected when foraging biofilms on plastics compared to biofilms on natural substrata but the mechanistic basis for these effects is unknown. For analyzing these effects in ecotoxicological assays stable and reproducible biofilm communities are required that are related to the environmental site of interest. Here, a defined biofilm community was established and used to perform grazing experiments with a freshwater snail. For this, snippets of different plastic materials were incubated in the photic zone of three different freshwater sites. Amplicon sequencing of biofilms formed on these snippets showed that the site of incubation and not the plastic material dominated the microbial community composition. From these biofilms, individual microbial strains as well as photoautotrophic consortia were isolated; these consortia consisted of heterotrophic bacteria that were apparently nourished by microalga. While biofilms formed by defined dual cultures of a microalga and an Alphaproteobacterium were not accepted by the snail P. fontinalis, a photoautotrophic consortium (Co_3) sustained growth and metabolism of this grazer. Amplicon sequencing revealed that consortium Co_3, which could be stably maintained on solid medium under photoautotrophic conditions, reproducibly formed biofilms of a defined composition on three different plastic materials and on glass surfaces. In conclusion, our study shows that the generation of domesticated photoautotrophic microbial communities is a valid novel approach for establishing laboratory ecotoxicological assays with higher environmental relevance than those based on defined microbiota.

Extreme weather events as an important factor for the evolution of plastisphere but not for the degradation process

Marine plastics, with their negative effects on marine life and the human health, have been recently recognized as a new niche for the colonization and development of marine biofilms. Members of the colonizing communities could possess the potential for plastic biodegradation. Thus, there is an urgent need to characterize these complex and geographically variable communities and elucidate the functionalities. In this work, we characterize the fungal and bacterial colonizers of 5 types of plastic films (High Density Polyethylene, Low Density Polyethylene, Polypropylene, Polystyrene and Polyethylene Terepthalate) over the course of a 242-day incubation in the south-eastern Mediterranean and relate them to the chemical changes observed on the surface of the samples via ATR-FTIR. The 16s rRNA and ITS2 ribosomal regions of the plastisphere communities were sequenced on four time points (35, 152, 202 and 242 days). The selection of the time points was dictated by the occurrence of a severe storm which removed biological fouling from the surface of the samples and initiated a second colonization period. The bacterial communities, dominated by Proteobacteria and Bacteroidetes, were the most variable and diverse. Fungal communities, characterized mainly by the presence of Ascomycota, were not significantly affected by the storm. Neither bacterial nor fungal community structure were related to the polymer type acting as substrate, while the surface of the plastic samples underwent weathering of oscillating degrees with time. This work examines the long-term development of Mediterranean epiplastic biofilms and is the first to examine how primary colonization influences the microbial community re-attachment and succession as a response to extreme weather events. Finally, it is one of the few studies to examine fungal communities, despite them containing putative plastic degraders.