Source apportionment of PM2.5 oxidative potential in an East Mediterranean site

Assessment of oxidative stress induced by atmospheric particulate matter: from acellular and cellular assays to the use of model and experimental organisms

Oxidative stress is considered one of the major mechanisms by which atmospheric particulate matter (PM) can induce adverse effects on living systems. Recently, the assessment of PM-induced oxidative stress effects has gained importance, and many efforts have been invested in identifying the most suitable techniques for evaluating PM toxicological potential. This paper briefly resumes the current knowledge and criticisms related to the application of the OP and cellular assays and systematically reviews the studies focused on the assessment of PM-induced oxidative stress using model or experimental organisms. Currently, the most widely used techniques are acellular oxidative potential (OP) assays, which allow for a quick and relatively low-cost assessment of the OP of PM; however, their biological representativeness has still to be confirmed. Other popular techniques are based on the exposure of different cell lines, which allows for assessing different biological outcomes; however, they are based on simple systems unable to properly represent the response complexity of a complete biological organism. Another issue related to both OP and cellular assays is that they are mainly applied to the extracts of sampled PM filters, with a possible alteration of the actual oxidizing properties of the sample. Conversely, the use of model or experimental organisms for the assessment of PM-induced oxidative stress is less frequent in the literature, even though this would enable the evaluation of multiple stress response pathways and, in some cases, the prevention of any physicochemical alteration of PM by in situ exposure. In this review, we analyzed available papers focused on the study of oxidative stress effects induced by PM in plant and lower animal model/experimental organisms. In our opinion, increased employment of model and experimental organisms may overcome most of the criticisms shown by conventional methods.

Kinetics of ascorbate and dithiothreitol oxidation by soluble copper, iron, and manganese, and 1,4-naphthoquinone: Influence of the species concentration and the type of fluid

An alternative metric to account for particulate matter (PM) composition-based toxicity is the ability of PM-species to generate reactive oxygen species (ROS) and deplete antioxidants, the so-called oxidative potential (OP). Acellular OP assays are the most used worldwide, mainly those based on ascorbic acid (AA) and dithiothreitol (DTT) depletion; OP values are calculated from AA/DTT concentration over time kinetic curves. Since a great variability in OP-DTT and OP-AA values can be found in the literature, the understanding of those factors affecting the kinetic rate of AA and DTT oxidation in the presence of PM-bound species will improve the interpretation of OP values. In this work, a kinetic study of the oxidation rate of AA and DTT driven by species usually found in PM (transition metals and naphthoquinone (NQ)) was carried out. In particular, the influence of the concentration of Cu(II), Fe(II), Fe(III), Mn(II), Mn(III), and 1,4-NQ, and the type of fluid used in the assay (phosphate buffer (PB), phosphate buffer saline (PBS) and artificial lysosomal fluid (ALF)) is analysed and discussed. The reaction orders with respect to the AA/DTT and the active compound, and the kinetic rate constants were also determined. The results show great variability in OP values among the studied species depending on the fluid used; the OP values were mostly higher in PB0.05 M, followed by PBS1x and ALF. Moreover, different species concentration-responses for OP-DTT/OP-AA were obtained. These differences were explained by the different reaction orders and kinetic rate constants obtained for each active compound in each fluid.

Variations in the oxidation potential of PM2.5 in an old industrial city in China from 2015 to 2018

PM2.5 pollution in China has decreased dramatically, but how its health effects change is not clear. There are 120 old industrial cities in China, where the sources, composition, and health effects of PM2.5 may be significantly different with other cities. Huangshi, an old industrial city in central China, underwent intense green transformations from 2015 to 2018. In this study, we collected ambient PM2.5 samples in 2015 and 2018 at an urban site in Huangshi. The average PM2.5 concentration decreased from 83.44 ± 48.04 μg/m3 in 2015 to 68.03 ± 39.41 μg/m3 in 2018. However, the average volume-normalized dithiothreitol (DTTv) of PM2.5 increased from 1.38 ± 0.45 nmol/min/m3 to 2.14 ± 1.31 nmol/min/m3 and the DTT normalized by particulate mass (DTTm) increased from 20.6 ± 10.1 pmol/min/μg to 40.07 ± 21.9 pmol/min/μg, indicating increased exposure risk and inherent toxicity. The increased toxicity of PM2.5 might be related to the increased trace elements (TEs) concentrations. The positive matrix factorization and multiple linear regression methods were employed to quantify the contributions of emission sources to PM2.5 and DTTv. The results showed that the contribution of coal combustion, industry, and dust to PM2.5 decreased significantly from 2015 to 2018, while that of vehicle emission and secondary sources increased. Despite the decreased fraction of coal combustion and industry sources, their contribution to DTTv increased slightly, which was caused by the increased intrinsic toxicity. The increased intrinsic toxicity was possibly caused by increased TEs, such as Pb, Cu, and V. Besides, the contribution of vehicle emission to DTTv also increased. Overall, these results provide valuable insights into the effectiveness of controlling strategies in reducing particulate health impacts in old industrial cities, and stress the necessity of formulating toxicity-oriented controlling strategies, with special attention to TEs from coal combustion and industry sources as well as vehicle emissions.

Oxidative potential associated with reactive oxygen species of size-resolved particles: The important role of the specific sources

Oxidative potential (OP) is a predictor of particulate matter (PM) toxicity. Size-resolved PM and its components that influence OP values can be generated from several sources. However, There is little research have attempted to determine the PM toxicity generated from specific sources. This paper studied the OP characterization and reactive oxygen species (ROS) formation of particles from specific sources and their effects on human health. OP associated with ROS of size-resolved particles was analyzed by using dithiothreitol (DTT) method and electron paramagnetic resonance (EPR) spectroscopy technology. And OP and ROS deposition of specific source PM were calculated for health through the Multi-path particle deposition (MPPD) model. The results evidenced that the highest water-soluble OP (OPws) from traffic sources (OPm: 104.50 nmol min-1·ug-1; OPv: 160.15 nmol min-1·m-3) and the lowest from ocean sources (OPm: 22.25 nmol⋅min-1⋅ug-1; OPv: 54.16 nmol min-1·m-3). The OPws allocation in PM from different sources all have a unimodal pattern range from 0.4 to 3.2 μm. ROS (·OH) displayed the uniform trend as PM OPws, indicating that PM< 3.2 is the major contributor to adverse health impacts for size-resolved PM because of its enhanced oxidative activity compared with PM> 3.2. Furthermore, this study predicted the DTT consumption of PM were assigned to different components. Most DTT losses are attributed to the transition metals. For specific sources, transition metals dominates DTT losses, accounting for 38%-80% of DTT losses from different sources, followed by Hulis-C, accounting for 1%-10%. MPPD model calculates that over 66% of pulmonary DTT loss comes by PM< 3.2, and over 71% of pulmonary ROS generation from PM< 3.2. Among these sources of pollution, traffic emissions are the primary contributors to reactive oxygen species (ROS) in environmental particulate matter (PM). Therefore, emphasis should be placed on controlling traffic emissions, especially in coastal areas.

Identifying urban emission sources and their contribution to the oxidative potential of fine particulate matter (PM2.5) in Kuwait

In this study, we investigated the seasonal variations, chemical composition, sources, and oxidative potential of ambient PM2.5 (particles with a diameter of less than 2.5 μm) in Kuwait City. The sampling campaign was conducted within the premises of Kuwait Institute for Scientific Research from June 2022 to May 2023, covering different seasons throughout the year. The personal cascade impactor sampler (PCIS) operated at flow rate of 9 L/min was employed to collect weekly PM2.5 samples on PTFE and quarts filters. These collected samples were analyzed for carbonaceous species (i.e., elemental and organic carbon), metals and transition elements, inorganic ions, and DTT (dithiothreitol) redox activity. Furthermore, principal component analysis (PCA) and multi-linear regression (MLR) were used to identify the predominant emission sources and their percentage contribution to the redox activity of PM2.5 in Kuwait. The results of this study highlighted that the annual-averaged ambient PM2.5 mass concentrations in Kuwait (59.9 μg/m3) substantially exceeded the World Health Organization (WHO) guideline of 10 μg/m3. Additionally, the summer season displayed the highest PM2.5 mass concentration (75.2 μg/m3) compared to other seasons, primarily due to frequent dust events exacerbated by high-speed winds. The PCA identified four primary PM2.5 sources: mineral dust, fossil fuel combustion, road traffic, and secondary aerosols. The mineral dust was found to be the predominant source, contributing 36.1% to the PM2.5 mass, followed by fossil fuel combustion and traffic emissions with contributions of 23.7% and 20.3%, respectively. The findings of MLR revealed that road traffic was the most significant contributor to PM2.5 oxidative potential, accounting for 47% of the total DTT activity. In conclusion, this comprehensive investigation provides essential insights into the sources and health implications of PM2.5 in Kuwait, underscoring the critical need for effective air quality management strategies to mitigate the impacts of particulate pollution in the region.