Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions

Unveiling the toxicity of micro-nanoplastics: A systematic exploration of understanding environmental and health implications

The surge in plastic production has spurred a global crisis as plastic pollution intensifies, with microplastics and nanoplastics emerging as notable environmental threats. Due to their miniature size, these particles are ubiquitous across ecosystems and pose severe hazards as they are ingested and bioaccumulate within organisms. Although global plastic production has reached an alarming 400.3 MTs, recycling efforts remain limited, with only 18.5 MTs being recycled. Currently, out of the total plastic waste, 49.6 % is converted into energy, 27 % is recycled, and 23.5 % is recovered as material, indicating a need for better waste management practices to combat the escalating pollution levels. Research studies on micro-nanoplastics have primarily concentrated on their environmental presence and laboratory-based toxicity studies. This review critically examines the sources and detection methods for micro-nanoplastics, emphasising their toxicological effects and ecological impacts. Organisms like zebrafish and rats serve as key models for studying these particle's bioaccumulative potential, showcasing adverse effects that extend to DNA damage, oxidative stress, and cellular apoptosis. Studies reveal that micro-nanoplastics can permeate biological barriers, including the blood-brain barrier, neurological imbalance, cardiac, respiratory, and dermatological disorders. These health risks, particularly relevant for humans, underscore the urgency for broader, real-world studies beyond controlled laboratory conditions. Additionally, the review discusses innovative energy-harvesting technologies as sustainable alternatives for plastic waste utilisation, particularly valuable for energy-deficient regions. These strategies aim to simultaneously address energy demands and mitigate plastic waste. This approach aligns with global sustainability goals, providing a promising avenue for both pollution reduction and energy generation. The review calls for further research to enhance detection techniques, assess long-term environmental impacts, and explore sustainable solutions that integrate energy recovery with pollution mitigation, especially in regions most affected by both energy shortages and increased plastic waste.

Natural Dynamics: Fresh Insight into the Succession of Microplastic-Borne Bacterial Communities along Riverine Courses to the Ocean

Microplastics (MPs) transport bacteria from rivers to oceans, impacting aquatic ecosystems. In situ incubation, a common method for studying bacterial communities on MPs, cannot reproduce complex and realistic environmental dynamics. Herein, a natural incubation experiment was performed to reproduce the migration of nine different substrates from rivers to the sea and examine the succession of bacterial communities on their surfaces. Furthermore, an in situ sequential incubation experiment and the natural incubation experiment were compared. Substantial structural changes were observed in the bacterial communities on MPs along riverine courses to the ocean, with implications for biosecurity, elemental cycling, and degradation potential in aquatic ecosystems. Rapid fluctuations in salinity were the prevalent factor for the significant changes in the bacterial community on MPs. The type of substrate has a significant effect on the formation and structure of bacterial communities, which depend on substrate structure and composition. Unlike in situ incubation, natural incubation reproduces realistic environmental dynamics, providing more comprehensive information on bacterial species composition, diversity, functional metabolism, and structure on MPs. This study introduces a novel methodological approach for MP research and enhances our understanding of the ecological risks associated with MPs transported from rivers to the ocean.

An Atmospheric Chemistry Perspective on Airborne Micro- and Nanoplastic Particles

Micro- and nanoplastic particles (MNPPs) are emerging pollutants with significant environmental impacts due to their persistence, increasing concentrations, and potential health risks. Most MNPP studies have focused on identifying, quantifying, and assessing their ecotoxicological impacts in water or soil. However, the atmosphere is crucial in transporting and chemically transforming MNPPs. Further, well-established aerosol particle characterization techniques are underutilized and inconsistently applied in existing atmospheric MNPP studies. This perspective synthesizes the existing literature and addresses future research needs unique to atmospheric MNPPs, highlighting the need to bridge the microplastics and atmospheric aerosol communities to better understand their sources, chemical transformations, transport mechanisms, as well as their health effects and ecological impacts, which differ from those in soil and water. Advancing research in these areas requires standardized methods and a multidisciplinary approach to comprehensively assess MNPP interactions across environmental compartments, providing essential insights into their environmental fate and risks.

Microplastics influencing aquatic environment and human health: A review of source, determination, distribution, removal, degradation, management strategy and future perspective

Microplastics (MPs) are produced from various primary and secondary sources and pose multifaceted environmental problems. They are of non-biodegradable nature and may stay in aquatic environments for a long time period. The present review has covered novel aspects pertaining to MPs that were not covered in earlier studies. It has been observed that several methods are being employed for samples collection, extraction and identification of MPs and polymer types using various equipment, chemicals and instrumental techniques. Aquatic species mistakenly ingest MPs, considering them prey and through food-chain, and then suffer from various metabolic disorders. The consumption of seafood and fish may consequently cause health implications in humans. Certain plasticizers are added during manufacturing to provide colour, durability, flexibility, and strength to plastics, but they leach out during usage, storage, and transport, as well as after entering the bodies of aquatic species and human beings. The leached chemicals (bisphenol-A, triclosan, phthalates, etc.) act as endocrine disrupting chemicals (EDCs), which effect on homeostasis; thereby causing neurotoxicity, cytotoxicity, reproductive problems, adverse behaviour and autism. Negative influence of MPs on carbon sequestration potential of water bodies is also observed, however more studies are required to understand it with a detail mechanism under natural conditions. The wastewater treatment plants are found to remove a large amount of MPs, but in turn, also act as significant sources of their release in sludge and effluents. Further, it is covered that how advanced oxidation processes, thermal- and photo-oxidation, fungi, algae and microbes degrade the plastics and increase their numbers in the surrounding environment. The management strategy comprising recovery of energy and other valuable by-products from plastic wastes, recycling and regulatory framework; are also described in detail. The future perspectives can be of paramount importance to control MPs generation and their abundance in the aquatic and other types of environments. The studies in future need to focus on advanced filtration techniques, advanced oxidation processes, energy recovery from plastic wastes and influences of MPs on carbon sequestration in aquatic environment and human health.

Coupling polyethylene microplastics with other pollutants: Exploring their combined effects on plant health and technologies for mitigating toxicity

The presence of microplastics in agricultural soils has raised concerns regarding their potential impacts on ecosystem health and plant growth. The introduction of microplastics into soil can alter its physicochemical properties, leading to adverse effects on plant development. Furthermore, the adsorption capabilities of microplastics may enhance the toxicity of soil pollutants, potentially resulting in detrimental effects on plant life. Large-sized microplastics may become adhered to root surfaces, impeding stomatal function and restricting nutrient uptake. Conversely, smaller microplastics and nano-plastics may be internalized by plants, causing cellular damage and genotoxicity. In addition, the presence of microplastics in soil can indirectly affect plant growth and development by altering the soil environment. Therefore, it is essential to investigate the potential impacts of microplastics on agricultural ecosystems and develop strategies to mitigate their effects. This review describes the adsorption power between polyethylene microplastics and pollutants (heavy metals, polycyclic aromatic hydrocarbons and antibiotics) commonly found in agricultural fields and the factors affecting the adsorption process. Additionally, the direct and indirect effects of microplastics on plants are summarized. Most of the single or combined microplastic contaminants showed negative effects on plant growth, with a few beneficial effects related to the characteristics of the microplastics and environmental factors. Currently microbial action and the application of soil conditioners or plant growth promoters can alleviate the effects of microplastics on plants to a certain extent. In light of the complex nature of soil environments, future research should concentrate on mitigate and control these interactions and the impact of compound pollution on ecosystems.

Microplastic injection? Identification and quantification of plastic particles in medical injections

Microplastics (MPs) mainly enter the human body through ingestion and breathing. Most of them are excreted through feces, and only a small amount can accumulate in human organs and tissues. In contrast, if intravenous injection contains MPs, it could directly enter bloodstream and maybe pose severe health risk. To verify this hypothesis, we collected two types of injection [0.9 % NaCl and 5 % Glucose] with three dominant brands in China, to analyze the possible MPs. The results indicated that the injection had an average abundance of 895 MP particles/kg, ranging from 140 to 1840 particles/kg. Furthermore, more MPs were found in NaCl than Glucose injection. The MPs encompassed 21 types of polymers with notable brand variations in distribution. Notably, polyisoprene chlorinated (61.77 % in NaCl, 61.23 % in Glucose) are most prevalent. Most polymers had small diameter, with 30.5 % and 44.2 % of particles measuring between 0 and 30 μm in NaCl and Glucose injection, respectively. These minute particle sizes contribute to the dispersal of MPs within human tissues. In terms of shape, most polymers are fibers/fragments, with some in bead form. Our study uncovered a previously unnoticed but important pathway for MPs enter the human body, emphasizing the need to evaluate health risks of infusion-related MP.

Microplastic Particles Detected in Fetal Cord Blood, Placenta, and Meconium: A Pilot Study of Nine Mother-Infant Pairs in South China

Microplastics (MPs) are emerging environmental pollutants. Pregnancy and infancy are sensitive windows for environmental exposure. However, few studies have investigated the presence of MPs in mother-infant pairs, or the exposure source. In this study, nine mother-infant pairs were recruited, and samples of placenta, cord blood, and meconium were collected. Information about the living environment and dietary habits were collected to determine the source of exposure during pregnancy. Micro-Raman spectroscopy was applied to identify MPs. In total, 9, 4, and 14 types of MPs were identified in the placenta, cord blood, and meconium samples, with particle counts of 34, 14, and 80, respectively. More than 80.47% of MPs detected in samples had a size of 100-400 μm. The abundance of MPs exhibited the order of meconium > placenta > cord blood (Hc = 14.959, p < 0.01). We found that the abundance of MPs in meconium from women who drank tea ≥ 3 times/week during pregnancy was lower than in those who drank less (p = 0.048). Our study presents evidence of MPs transfer via the placenta-cord blood-meconium pathway. We also found that the habit of drinking tea among pregnant women might be related to the abundance of MPs in meconium.

Investigation of cell-to-cell transfer of polystyrene microplastics through extracellular vesicle-mediated communication

Plastics are an essential part of human life and their production is increasing every year. Plastics degrade into small particles (<5 mm, microplastics, MPs) in the environment due to various factors. MPs are widely distributed in the environment, and all living organisms are exposed to the effects of MPs. Extracellular vesicles (EVs) are small membrane particles surrounded by a lipid bilayer that are released into the environment by various cell types and are highly involved in inter- and intra-cellular communication through the exchange of proteins, nucleic acids, and lipids between cells. There have been numerous reports of adverse effects associated with the accumulation of MPs in human and animal cells, with recent studies showing that plastic treatment increases the number of EVs released from cells, but the mechanisms by which MPs accumulate and move between cells remain unclear. In this study, we investigated whether polystyrene (PS)-MPs are transferred cell-to-cell via EVs. This study showed that cell-derived EVs can transport plastic particles. Furthermore, we confirmed the accumulation of PS-MPs transported by EVs within cells using a real-time imaging device. This study provides an understanding of potential EVs-mediated effects of PS-MPs on organisms and suggests directions for further research.

Microplastics in marine sponges (Porifera) along a highly urbanized estuarine gradient in Santos, Brazil

Microplastics (MPs) are ubiquitously found in environmental matrices, particularly affecting aquatic systems. While several marine species have been widely used to assess MP contamination, sponges (Porifera) are less used. The MPs contamination was assessed in the sun sponge (Hymeniacidon heliophila) along a gradient at the Santos Estuarine System (Brazil). A 14-fold difference between concentrations (particles g-1) was verified between the most (1.40 ± 0.81) and least (0.10 ± 0.12) contaminated sites, confirming the local contamination gradient. The MPs found were primarily polypropylene, small (1.2-1000 μm), fibrous, and colored. Considering total concentrations, sizes and shapes these spatial patterns were similar those previously detected in molluscs obtained in the same sites. On the other hand, they differed in polymeric composition and color categories. Such findings give important initial insights into the potential role of marine sponges as putative sentinels of MPs contamination.

The green revolution of food waste upcycling to produce polyhydroxyalkanoates

This review emphasizes the urgent need for food waste upcycling as a response to the mounting global food waste crisis. Focusing on polyhydroxyalkanoates (PHAs) as an alternative to traditional plastics, it examines the potential of various food wastes as feedstock for microbial fermentation and PHA production. The upcycling of food waste including cheese whey, waste cooking oil, coffee waste, and animal fat is an innovative practice for food waste management. This approach not only mitigates environmental impacts but also contributes to sustainable development and economic growth. Downstream processing techniques for PHAs are discussed, highlighting their role in obtaining high-quality materials. The study also addresses sustainability considerations, emphasizing biodegradability and recycling, while acknowledging the challenges associated with this path.

Impact of indoor air pollution on DNA damage and chromosome stability: a systematic review

Indoor air pollution is becoming a rising public health problem and is largely resulting from the burning of solid fuels and heating in households. Burning these fuels produces harmful compounds, such as particulate matter regarded as a major health risk, particularly affecting the onset and exacerbation of respiratory diseases. As exposure to polluted indoor air can cause DNA damage including DNA sd breaks as well as chromosomal damage, in this paper, we aim to provide an overview of the impact of indoor air pollution on DNA damage and genome stability by reviewing the scientific papers that have used the comet, micronucleus, and γ-H2AX assays. These methods are valuable tools in human biomonitoring and for studying the mechanisms of action of various pollutants, and are readily used for the assessment of primary DNA damage and genome instability induced by air pollutants by measuring different aspects of DNA and chromosomal damage. Based on our search, in selected studies (in vitro, animal models, and human biomonitoring), we found generally higher levels of DNA strand breaks and chromosomal damage due to indoor air pollutants compared to matched control or unexposed groups. In summary, our systematic review reveals the importance of the comet, micronucleus, and γ-H2AX assays as sensitive tools for the evaluation of DNA and genome damaging potential of different indoor air pollutants. Additionally, research in this particular direction is warranted since little is still known about the level of indoor air pollution in households or public buildings and its impact on genetic material. Future studies should focus on research investigating the possible impact of indoor air pollutants in complex mixtures on the genome and relate pollutants to possible health outcomes.

A review on microbes mediated resource recovery and bioplastic (polyhydroxyalkanoates) production from wastewater

BACKGROUND

Plastic is widely utilized in packaging, frameworks, and as coverings material. Its overconsumption and slow degradation, pose threats to ecosystems due to its toxic effects. While polyhydroxyalkanoates (PHA) offer a sustainable alternative to petroleum-based plastics, their production costs present significant obstacles to global adoption. On the other side, a multitude of household and industrial activities generate substantial volumes of wastewater containing both organic and inorganic contaminants. This not only poses a threat to ecosystems but also presents opportunities to get benefits from the circular economy. Production of bioplastics may be improved by using the nutrients and minerals in wastewater as a feedstock for microbial fermentation. Strategies like feast-famine culture, mixed-consortia culture, and integrated processes have been developed for PHA production from highly polluted wastewater with high organic loads. Various process parameters like organic loading rate, organic content (volatile fatty acids), dissolved oxygen, operating pH, and temperature also have critical roles in PHA accumulation in microbial biomass. Research advances are also going on in downstream and recovery of PHA utilizing a combination of physical and chemical (halogenated solvents, surfactants, green solvents) methods. This review highlights recent developments in upcycling wastewater resources into PHA, encompassing various production strategies, downstream processing methodologies, and techno-economic analyses.

SHORT CONCLUSION

Organic carbon and nitrogen present in wastewater offer a promising, cost-effective source for producing bioplastic. Previous attempts have focused on enhancing productivity through optimizing culture systems and growth conditions. However, despite technological progress, significant challenges persist, such as low productivity, intricate downstream processing, scalability issues, and the properties of resulting PHA.

Microplastic prevalence and human exposure in the bottled drinking water in the west Godavari region of Andhra Pradesh, India

Microplastics (MPs) are widespread, minute plastic particles present in various aquatic environments, raising concerns about their effect on human health and ecosystems. The detrimental effects of MPs on the environment, include the contamination of ecosystems, harm to aquatic life through ingestion, potential disruption of food chains, and long-term ecological consequences. Despite numerous studies confirming the MP's presence in aquatic environments, research specifically focused on MPs in bottled drinking water (BDW) is limited. Research on MPs in drinking water is vital to assess potential health risks and develop strategies for ensuring water safety and quality. This study fills a research gap by investigating microplastics (MPs) in nine brands of BDW in the West Godavari region of Andhra Pradesh, India. The average MP concentration in BDW was found to be 2.89 ± 0.48 items/L, with fibers being the predominant shape and sizes ranging from 500 to 1000 μm. Transparent and blue were the most common colors. From ATR-FTIR analysis, the dominant polymer found was polypropylene (PP) followed by polyethylene terephthalate (PET). The human risk assessment was also calculated using the formula of Estimated daily intake (EDI) and Lifetime intake (LTI). The calculation found that the EDI of MPs for children and adults ranged from 0.041 to 0.291 MPs per kilogram per day and 0.019 to 0.133 MPs per kilogram per day, respectively. The mean LTI of MP consumption of an individual, ranged from 17,958 to 2,54,861 MPs, considering an average age of 75 years. The current findings offer valuable information for ongoing evaluations of the potential human risks linked to MP exposure.

Current patterns and trends of microplastic pollution in the marine environment: A bibliometric analysis

Microplastics are pervasive in the natural environment and pose a growing concern for global health. Plastic waste in marine environments has emerged as a global issue, threatening not only marine biota but also human health due to its implications for the food chain. This study aims to discern the patterns and trends of research, specifically on Marine Microplastic Pollution (MMP), based on a bibliometric analysis of scientific publications from 2011 to 2022. The methodology utilized in this study comprises three stages: (a) creating a bibliographical dataset from Scopus by Elsevier and the Web of Science Core Collection by Clarivate Analytics, (b) analyzing current research (trends and patterns) using bibliometric analysis through Biblioshiny tool, and (c) examining themes and subthemes in MMP research (wastewater treatment, plastic ingestion, the Mediterranean Sea, microplastics pollution, microplastics in freshwater, microplastic ingestion, plastic pollution, and microplastic pollution in the marine environment). The findings reveal that during the studied period, the number of MMP publications amounted to 1377 articles, with an average citation per publication of 59.23 and a total citation count of 81,553. The most cited article was published in 2011, and since then, the number of publications on this topic has been increasing steadily. The author count stood at 5478, with 22 trending topics identified from the 1377 published titles. Between 2019 and 2022, the countries contributing most to the publication of MMP articles were China, the United States of America (USA), and the United Kingdom (UK). However, a noticeable shift in the origin of author countries was observed in the 2019-2022 timeframe, transitioning from a dominance by the USA and the UK to a predominance by China. In 2019, there was a substantial increase in the volume of publications addressing the topic of microplastics. The results show that the most prevalent themes and subthemes pertained to MMP in the Mediterranean Sea. The journals with the highest number of MMP articles published were the Marine Pollution Bulletin (253 articles) and Science of the Total Environment (190 articles). The analysis concludes that research on MMP remains prominent and appears to be increasing each year.