Role of different types of nanomaterials against diagnosis, prevention and therapy of COVID-19

MXenes in microbiology and virology: from pathogen detection to antimicrobial applications

MXenes, a rapidly emerging class of two-dimensional materials, have demonstrated exceptional versatility and functionality across various domains, including microbiology and virology. Recent advancements in MXene synthesis techniques, encompassing both top-down and bottom-up approaches, have expanded their potential applications in pathogen detection, antimicrobial treatments, and biomedical platforms. This review highlights the unique physicochemical properties of MXenes, including their large surface area, tunable surface chemistry, and high biocompatibility, which contribute to their antimicrobial efficacy against bacteria, fungi, and viruses, such as SARS-CoV-2. The antibacterial mechanisms of MXenes, including membrane disruption, reactive oxygen species (ROS) generation, and photothermal inactivation, are discussed alongside hybridization strategies that enhance their bioactivity. Additionally, the challenges and future prospects of MXenes in developing advanced antimicrobial coatings, diagnostic tools, and therapeutic systems are outlined. By addressing current limitations and exploring innovative solutions, this study underscores the transformative potential of MXenes in microbiology, virology, and biomedical applications.

Influence of branched ligand architectures on nanoparticle interactions with lipid bilayers

Gold nanoparticles functionalized with organic cationic ligands have shown promise as biomedical agents, but their interactions with cellular membranes are not yet well-understood and design rules for ligands that promote desired cellular interactions are lacking. Past experimental studies have demonstrated that ligand lipophilicity, quantified by the ligand end group partition coefficient, can be used as a descriptor for predicting nano-bio interactions, but such a descriptor is incapable accounting for ligand architecture, such as chain branching. To probe the effects of ligand end group architecture on ligand-lipid interactions, we perform molecular dynamics simulations to investigate how ligand alkyl chain branching modulates the thermodynamics and mechanisms of nanoparticle adsorption to lipid membranes. We designed four pairs of 2 nm diameter gold nanoparticles where each pair had ligand end groups with similar lipophilicity but varying alkyl chain architecture (e.g., one long alkyl chain vs. two short chains) to isolate branching effects from lipophilicity. Free energy calculations and mechanistic insight revealed that alkyl end group branching can decrease free energy barriers for adsorption by disrupting ligand monolayer packing, increasing end group protrusions that lead to favorable ligand intercalation with minimal membrane disruption. Furthermore, increased end group branching promotes adsorption by increasing the exposure of nonpolar surface area to water, which results in a greater reduction of free energy upon exposure to the nonpolar core of the lipid bilayer. These results show that ligand chain architecture can modulate nano-bio interactions, limiting the exclusive use of lipophilicity as a descriptor to predict cellular uptake of surface-functionalized nanoparticles.

Biolayer-Interferometry-Guided Functionalization of Screen-Printed Graphene for Label-Free Electrochemical Virus Detection

Additive manufacturing holds promise for rapid prototyping and low-cost production of biosensors for diverse pathogens. Among additive manufacturing methods, screen printing is particularly desirable for high-throughput production of sensing platforms. However, this technique needs to be combined with carefully formulated inks, rapid postprocessing, and selective functionalization to meet all requirements for high-performance biosensing applications. Here, we present screen-printed graphene electrodes that are processed with thermal annealing to achieve high surface area and electrical conductivity for sensitive biodetection via electrochemical impedance spectroscopy. As a proof-of-concept, this biosensing platform is utilized for electrochemical detection of SARS-CoV-2. To ensure reliable specificity in the presence of multiple variants, biolayer interferometry (BLI) is used as a label-free and dynamic screening method to identify optimal antibodies for concurrent affinity to the Spike S1 proteins of Delta, Omicron, and Wild Type SARS-CoV-2 variants while maintaining low affinity to competing pathogens such as Influenza H1N1. The BLI-identified antibodies are robustly bound to the graphene electrode surface via oxygen moieties that are introduced during the thermal annealing process. The resulting electrochemical immunosensors achieve superior metrics including rapid detection (55 s readout following 15 min of incubation), low limits of detection (approaching 500 ag/mL for the Omicron variant), and high selectivity toward multiple variants. Importantly, the sensors perform well on clinical saliva samples detecting as few as 103 copies/mL of SARS-CoV-2 Omicron, following CDC protocols. The combination of the screen-printed graphene sensing platform and effective antibody selection using BLI can be generalized to a wide range of point-of-care immunosensors.

Photocatalysis air purification systems for coronavirus removal: Current technologies and future trends

Air pollution causes extreme toxicological repercussions for human health and ecology. The management of airborne bacteria and viruses has become an essential goal of air quality control. Existing pathogens in the air, including bacteria, archaea, viruses, and fungi, can have severe effects on human health. The photocatalysis process is one of the favorable approaches for eliminating them. The oxidative nature of semiconductor-based photocatalysts can be used to fight viral activation as a green, sustainable, and promising approach with significant promise for environmental clean-up. The photocatalysts show wonderful performance under moderate conditions while generating negligible by-products. Airborne viruses can be inactivated by various photocatalytic processes, such as chemical oxidation, toxicity due to the metal ions released from photocatalysts composed of metals, and morphological damage to viruses. This review paper provides a thorough and evaluative analysis of current information on using photocatalytic oxidation to deactivate viruses.

Two-Dimensional (2D) materials in the detection of SARS-CoV-2

The SARS-CoV-2 pandemic has resulted in a devastating effect on human health in the last three years. While tremendous effort has been devoted to the development of effective treatment and vaccines against SARS-CoV-2 and controlling the spread of it, collective health challenges have been encountered along with the concurrent serious economic impacts. Since the beginning of the pandemic, various detection methods like PCR-based methods, isothermal nucleic acid amplification-based (INAA) methods, serological methods or antibody tests, and evaluation of X-ray chest results have been exploited to diagnose SARS-CoV-2. PCR-based detection methods in these are considered gold standards in the current stage despite their drawbacks, including being high-cost and time-consuming procedures. Furthermore, the results obtained from the PCR tests are susceptible to sample collection methods and time. When the sample is not collected properly, obtaining a false result may be likely. The use of specialized lab equipment and the need for trained people for the experiments pose additional challenges in PCR-based testing methods. Also, similar problems are observed in other molecular and serological methods. Therefore, biosensor technologies are becoming advantageous with their quick response, high specificity and precision, and low-cost characteristics for SARS-CoV-2 detection. In this paper, we critically review the advances in the development of sensors for the detection of SARS-CoV-2 using two-dimensional (2D) materials. Since 2D materials including graphene and graphene-related materials, transition metal carbides, carbonitrides, and nitrides (MXenes), and transition metal dichalcogenides (TMDs) play key roles in the development of novel and high-performance electrochemical (bio)sensors, this review pushes the sensor technologies against SARS-CoV-2 detection forward and highlights the current trends. First, the basics of SARS-CoV-2 detection are described. Then the structure and the physicochemical properties of the 2D materials are explained, which is followed by the development of SARS-CoV-2 sensors by exploiting the exceptional properties of the 2D materials. This critical review covers most of the published papers in detail from the beginning of the outbreak.

Analysis of Conocurvone, Ganoderic acid A and Oleuropein molecules against the main protease molecule of COVID-19 by in silico approaches: Molecular dynamics docking studies

Traditional medicines against COVID-19 have taken important outbreaks evidenced by multiple cases, controlled clinical research, and randomized clinical trials. Furthermore, the design and chemical synthesis of protease inhibitors, one of the latest therapeutic approaches for virus infection, is to search for enzyme inhibitors in herbal compounds to achieve a minimal amount of side-effect medications. Hence, the present study aimed to screen some naturally derived biomolecules with anti-microbial properties (anti-HIV, antimalarial, and anti-SARS) against COVID-19 by targeting coronavirus main protease via molecular docking and simulations. Docking was performed using SwissDock and Autodock4, while molecular dynamics simulations were performed by the GROMACS-2019 version. The results showed that Oleuropein, Ganoderic acid A, and conocurvone exhibit inhibitory actions against the new COVID-19 proteases. These molecules may disrupt the infection process since they were demonstrated to bind at the coronavirus major protease's active site, affording them potential leads for further research against COVID-19.

Application of nanomaterials against SARS-CoV-2: An emphasis on their usefulness against emerging variants of concern

Researchers are now looking to nanomaterials to fight serious infectious diseases that cause outbreaks and even pandemics. SARS-CoV-2 brought chaos to almost every walk of life in the past 2 years and has challenged every available treatment method. Although vaccines were developed in no time against it, the most pressing issue was the emergence of variants of concern arising because of the rapidly evolving viral strains. The higher pathogenicity and, in turn, the higher mortality rate of infections caused by these variants renders the existing vaccines less effective and the effort to produce further vaccines a costly endeavor. While several techniques, such as immunotherapy and repurposed pharmaceutical research, are being studied to minimize viral infection, the fundamentals of nanotechnology must also be considered to enhance the anti-SARS-CoV-2 efforts. For instance, silver nanoparticles (AgNPs) have been applied against SARS-CoV-2 effectively. Similarly, nanomaterials have been tested in masks, gloves, and disinfectants to aid in controlling SARS-CoV-2. Nanotechnology has also contributed to diagnoses such as rapid and accurate detection and treatment such as the delivery of mRNA vaccines and other antiviral agents into the body. The development of polymeric nanoparticles has been dubbed a strategy of choice over traditional drugs because of their tunable release kinetics, specificity, and multimodal drug composition. Our article explores the potential of nanomaterials in managing the variants of concern. This will be achieved by highlighting the inherent ability of nanomaterials to act against the virus on fronts such as inhibition of SARS-CoV-2 entry, inhibition of RNA replication in SARS-CoV-2, and finally, inhibition of their release. In this review, a detailed discussion on the potential of nanomaterials in these areas will be tallied with their potential against the current and emerging future variants of concern.

Smart Nanostructured Materials for SARS-CoV-2 and Variants Prevention, Biosensing and Vaccination

The coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has raised great concerns about human health globally. At the current stage, prevention and vaccination are still the most efficient ways to slow down the pandemic and to treat SARS-CoV-2 in various aspects. In this review, we summarize current progress and research activities in developing smart nanostructured materials for COVID-19 prevention, sensing, and vaccination. A few established concepts to prevent the spreading of SARS-CoV-2 and the variants of concerns (VOCs) are firstly reviewed, which emphasizes the importance of smart nanostructures in cutting the virus spreading chains. In the second part, we focus our discussion on the development of stimuli-responsive nanostructures for high-performance biosensing and detection of SARS-CoV-2 and VOCs. The use of nanostructures in developing effective and reliable vaccines for SARS-CoV-2 and VOCs will be introduced in the following section. In the conclusion, we summarize the current research focus on smart nanostructured materials for SARS-CoV-2 treatment. Some existing challenges are also provided, which need continuous efforts in creating smart nanostructured materials for coronavirus biosensing, treatment, and vaccination.

Deep visual social distancing monitoring to combat COVID-19: A comprehensive survey

Since the start of the COVID-19 pandemic, social distancing (SD) has played an essential role in controlling and slowing down the spread of the virus in smart cities. To ensure the respect of SD in public areas, visual SD monitoring (VSDM) provides promising opportunities by (i) controlling and analyzing the physical distance between pedestrians in real-time, (ii) detecting SD violations among the crowds, and (iii) tracking and reporting individuals violating SD norms. To the authors' best knowledge, this paper proposes the first comprehensive survey of VSDM frameworks and identifies their challenges and future perspectives. Typically, we review existing contributions by presenting the background of VSDM, describing evaluation metrics, and discussing SD datasets. Then, VSDM techniques are carefully reviewed after dividing them into two main categories: hand-crafted feature-based and deep-learning-based methods. A significant focus is paid to convolutional neural networks (CNN)-based methodologies as most of the frameworks have used either one-stage, two-stage, or multi-stage CNN models. A comparative study is also conducted to identify their pros and cons. Thereafter, a critical analysis is performed to highlight the issues and impediments that hold back the expansion of VSDM systems. Finally, future directions attracting significant research and development are derived.

Fullerene Derivatives for Drug Delivery against COVID-19: A Molecular Dynamics Investigation of Dendro[60]fullerene as Nanocarrier of Molnupiravir

In this paper, a theoretical investigation is made regarding the possibility of using a water-soluble derivative of C₆₀ as a drug delivery agent for treating Coronavirus disease 2019 (COVID-19). Molnupiravir is chosen as the transporting pharmaceutical compound since it has already proved to be very helpful in saving lives in case of hospitalization. According to the proposed formulation, a carboxyfullerene known as dendro[60]fullerene is externally connected with two molnupiravir molecules. Two properly formed nitrogen single bonds (N-N) are used as linkers between the dendro[60]fullerene and the two molnupiravir molecules to create the final form of the C₆₀ derivate/molnupiravir conjugate. The energetics of the developed molecular system and its interaction with water and n-octanol are extensively studied via classical molecular dynamics (MD) using the COMPASS II force field. To study the interactions with water and n-octanol, an appropriate periodic amorphous unit cell is created that contains a single C₆₀ derivative/molnupiravir system surrounded by numerous solvent molecules and simulated via MD in room conditions. In addition, the corresponding solvation-free energies of the investigated drug delivery system are computed and set in contrast with the corresponding properties of the water-soluble dendro[60]fullerene, to test its solubility capabilities.

Textiles Functionalized with Copper Oxides: A Sustainable Option for Prevention of COVID-19

COVID-19 is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and healthcare-associated infections (HAIs) represent severe problems in health centers and public areas. Polyester/cotton (PES/CO) blend fabrics have been functionalized with copper oxides on an industrial scale. For functionalization, the impregnation dyeing technique was applied. The functionalized samples were tested virologically against SARS-CoV-2 and human coronavirus (229E) according to ISO 18184-2019 and microbiologically against Escherichia coli (ATCC 25922) bacteria according to ASTM E2149-2013. The results show that the fabric functionalized with copper oxides inactivated both viruses after 30 min of exposure, presenting excellent virucidal activity against 229E and SARS-CoV-2, respectively. Furthermore, its inactivation efficiency for SARS-CoV-2 was 99.93% and 99.96% in 30 min and 60 min exposure, respectively. The fabric inhibited bacterial growth by more than 99% before and after 10 and 20 washes. In conclusion, 265 m of PES/CO fabric (wide 1.7 m) was functionalized in situ on an industrial scale with copper oxide nanoparticles. The functionalized fabric presented virucidal and bactericidal properties against SARS-CoV-2 and Escherichia coli.

Functionalised Anodised Aluminium Oxide as a Biocidal Agent

In this article, we describe the antimicrobial properties of a new composite based on anodic aluminium oxide (AAO) membranes containing propyl-copper-phosphonate units arranged at a predetermined density inside the AAO channels. The samples were prepared with four concentrations of copper ions and tested as antimicrobial drug on four different strains of Escherichia coli (K12, R2, R3 and R4). For comparison, the same strains were tested with three types of antibiotics using the minimal inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) tests. Moreover, DNA was isolated from the analysed bacteria which was additionally digested with formamidopyrimidine-DNA glycosylase (Fpg) protein from the group of repair glycosases. These enzymes are markers of modified oxidised bases in nucleic acids produced during oxidative stress in cells. Preliminary cellular studies, MIC and MBC tests and digestion with Fpg protein after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than antibiotics such as ciprofloxacin, bleomycin and cloxacillin. The described composites are highly specific for the analysed model Escherichia coli strains and may be used in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the progressing pandemic era. The results show much stronger antibacterial properties of the functionalised membranes on the action of bacterial membranes in comparison to the antibiotics in the Fpg digestion experiment. This is most likely due to the strong induction of oxidative stress in the cell through the breakdown of the analysed bacterial DNA. We have also observed that the intermolecular distances between the functional units play an important role for the antimicrobial properties of the used material. Hence, we utilised the idea of the 2D solvent to tailor them.

Environmentally azithromycin pharmaceutical wastewater management and synergetic biocompatible approaches of loaded azithromycin@hematite nanoparticles

Pharmaceutical wastewater contamination via azithromycin antibiotic and the continuous emergence of some strains of bacteria, cancer, and the Covid-19 virus. Azithromycin wastewater treatment using the biosynthesized Hematite nanoparticles (α-HNPs) and the biocompatible activities of the resulted nanosystem were reported. Biofabrication of α-HNPs using Echinacea purpurea liquid extract as a previously reported approach was implemented. An evaluation of the adsorption technique via the biofabricated α-HNPs for the removal of the Azr drug contaminant from the pharmaceutical wastewater was conducted. Adsorption isotherm, kinetics, and thermodynamic parameters of the Azr on the α-HNPs surface have been investigated as a batch mode of equilibrium experiments. Antibacterial, anticancer, and antiviral activities were conducted as Azr@α-HNPs. The optimum conditions for the adsorption study were conducted as solution pH = 10, 150 mg dose of α-HNPs, and Azr concentration 400 mg/L at 293 K. The most fitted isothermal model was described according to the Langmuir model at adsorption capacity 114.05 mg/g in a pseudo-second-order kinetic mechanistic at R2 0.9999. Thermodynamic study manifested that the adsorption behavior is a spontaneous endothermic chemisorption process. Subsequently, studying the biocompatible applications of the Azr@α-HNPs. Azr@α-HNPs antibacterial activity revealed a synergistic effect in the case of Gram-positive more than Gram-negative bacteria. IC50 of Azr@α-HNPs cytotoxicity against MCF7, HepG2, and HCT116 cell lines was investigated and it was found to be 78.1, 81.7, and 93.4 µg/mL respectively. As the first investigation of the antiviral use of Azr@α-HNPs against SARS-CoV-2, it was achieved a safety therapeutic index equal to 25.4 revealing a promising antiviral activity. An admirable impact of the use of the biosynthesized α-HNPs and its removal nanosystem product Azr@α-HNPs was manifested and it may be used soon as a platform of the drug delivery nanosystem for the biomedical applications.

Nanotechnology Role Development for COVID-19 Pandemic Management

The global outbreak of coronavirus disease has sent an ominous message to the field of innovative and advanced technology research and development (COVID-19). To accomplish this, convectional technology and recent discoveries can be combined, or new research directions can be opened up using nanotechnology. Nanotechnology can be used to prevent, diagnose, and treat SARS-CoV-2 infection. As the pandemic spreads, a thorough examination of nanomaterials' role in pandemic response is highly desirable. According to this comprehensive review article, nanotechnology can be used to prevent, diagnose, and treat COVID-19. This research will be extremely useful during the COVID-19 outbreak in terms of developing rules for designing nanostructure materials to combat the outbreak.

Green aspects of photocatalysts during corona pandemic: a promising role for the deactivation of COVID-19 virus

The selection of a facile, eco-friendly, and effective methodology is the need of the hour for efficient curing of the COVID-19 virus in air, water, and many food products. Recently, semiconductor-based photocatalytic methodologies have provided promising, green, and sustainable approaches to battle against viral activation via the oxidative capabilities of various photocatalysts with excellent performance under moderate conditions and negligible by-products generation as well. Considering this, recent advances in photocatalysis for combating the spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are inclusively highlighted. Starting from the origin to the introduction of the coronavirus, the significant potential of photocatalysis against viral prevention and -disinfection is discussed thoroughly. Various photocatalytic material-based systems including metal-oxides, metal-free and advanced 2D materials (MXenes, MOFs and COFs) are systematically examined to understand the mechanistic insights of virus-disinfection in the human body to fight against COVID-19 disease. Also, a roadmap toward sustainable solutions for ongoing COVID-19 contagion is also presented. Finally, the challenges in this field and future perspectives are comprehensively discussed involving the bottlenecks of current photocatalytic systems along with potential recommendations to deal with upcoming pandemic situations in the future.

Current perspective in metal oxide based photocatalysts for virus disinfection: A review

Nanotechnology holds huge potential for the prevention of various viral outbreaks that have increased at a disquieting rate over the past decades. Metal oxide nanomaterials with oxidative capability are the effective materials that provide platforms as well as tools for the well understanding of the mechanism, its detection, and treatment of various viral diseases like measles, influenza, herpes, ebola, current COVID-19 etc. In this inclusive review, we survey various previous research articles on different notable photoactive transition metal oxides that possess enough potential to act as antiviral agents for the deactivation of harmful viruses. We investigated and highlighted the plausible photocatalytic oxidative mechanism of photoactive transition metal oxides in degrading viral coatings, genomic RNA using suitable free radical generation. The key finding of the present review article including the discovery of a vision on the suitable photocatalytic transition metal oxides that have been proven to be excellent against harmful viruses and consequently combatting deadly CoV-2 in the environment. This review intends to provide conclusive remarks and a realistic outlook on other advanced photocatalytic metal oxides as a potential solution in battling other similar upcoming pandemics.

Breath Sensor Technology for the Use in Mechanical Lung Ventilation Equipment for Monitoring Critically Ill Patients

Background: The need for mechanical lung ventilation is common in critically ill patients, either with COVID-19 infection or due to other causes. Monitoring of patients being ventilated is essential for timely and improved management. We here propose the use of a novel breath volatile organic compound sensor technology to be used in a mechanical lung ventilation machine for this purpose; the technology was evaluated in critically ill COVID-19 patients on mechanical lung ventilation. Methods: Based on the consistency results of our study data, the breath sensor device with metal oxide gas sensors and environment-controlling sensors was mounted on the ventilation exhaust port of the ventilation machine; this allowed to ensure additional safety since the device was placed outside the contour between the patient and equipment. Results: The sensors allowed stable registration of the signals for up to several weeks for 10 patients in total, depending on the storage amount; a proportion of patients were intubated or received tracheostoma during the evaluation period. Future studies are on the way to correlate sensor readings to other parameters characterizing the severity of the patient condition and outcome. Conclusions: We suppose that such technology will allow patient monitoring in real-time for timely identification of deterioration, potentially requiring some change of management. The obtained results are preliminary and further studies are needed to examine their clinical significance.

Metal Nanoparticles and Carbon-Based Nanomaterials for Improved Performances of Electrochemical (Bio)Sensors with Biomedical Applications

Monitoring human health for early detection of disease conditions or health disorders is of major clinical importance for maintaining a healthy life. Sensors are small devices employed for qualitative and quantitative determination of various analytes by monitoring their properties using a certain transduction method. A "real-time" biosensor includes a biological recognition receptor (such as an antibody, enzyme, nucleic acid or whole cell) and a transducer to convert the biological binding event to a detectable signal, which is read out indicating both the presence and concentration of the analyte molecule. A wide range of specific analytes with biomedical significance at ultralow concentration can be sensitively detected. In nano(bio)sensors, nanoparticles (NPs) are incorporated into the (bio)sensor design by attachment to the suitably modified platforms. For this purpose, metal nanoparticles have many advantageous properties making them useful in the transducer component of the (bio)sensors. Gold, silver and platinum NPs have been the most popular ones, each form of these metallic NPs exhibiting special surface and interface features, which significantly improve the biocompatibility and transduction of the (bio)sensor compared to the same process in the absence of these NPs. This comprehensive review is focused on the main types of NPs used for electrochemical (bio)sensors design, especially screen-printed electrodes, with their specific medical application due to their improved analytical performances and miniaturized form. Other advantages such as supporting real-time decision and rapid manipulation are pointed out. A special attention is paid to carbon-based nanomaterials (especially carbon nanotubes and graphene), used by themselves or decorated with metal nanoparticles, with excellent features such as high surface area, excellent conductivity, effective catalytic properties and biocompatibility, which confer to these hybrid nanocomposites a wide biomedical applicability.

Carbon Dots: Classification, Properties, Synthesis, Characterization, and Applications in Health Care-An Updated Review (2018-2021)

Carbon dots (CDs) are usually smaller than 10 nm in size, and are meticulously formulated and recently introduced nanomaterials, among the other types of carbon-based nanomaterials. They have gained significant attention and an incredible interest in the field of nanotechnology and biomedical science, which is merely due to their considerable and exclusive attributes; including their enhanced electron transferability, photobleaching and photo-blinking effects, high photoluminescent quantum yield, fluorescence property, resistance to photo-decomposition, increased electrocatalytic activity, good aqueous solubility, excellent biocompatibility, long-term chemical stability, cost-effectiveness, negligible toxicity, and acquaintance of large effective surface area-to-volume ratio. CDs can be readily functionalized owing to the abundant functional groups on their surfaces, and they also exhibit remarkable sensing features such as specific, selective, and multiplex detectability. In addition, the physico-chemical characteristics of CDs can be easily tunable based on their intended usage or application. In this comprehensive review article, we mainly discuss the classification of CDs, their ideal properties, their general synthesis approaches, and primary characterization techniques. More importantly, we update the readers about the recent trends of CDs in health care applications (viz., their substantial and prominent role in the area of electrochemical and optical biosensing, bioimaging, drug/gene delivery, as well as in photodynamic/photothermal therapy).