Degradation of orange II dye under dark ambient conditions by MeSrCuO (Me = Mg and Ce) metal oxides

Role of perovskite non-stoichiometry on catalytic oxygen dark activation for the removal of azo dyes from wastewater

Effluents of the dying and printing industries are a significant contributor to water pollution. Since synthetic dyes are primarily resistant to natural degradation, they remain in water bodies for an exceptionally long time if discharged untreated. Oxygen dark activation is a promising candidate for the degradation of azo dyes as it does not require the use of additional reagents or even the presence of light. It is an advanced catalytic oxidation process that converts oxygen dissolved in wastewater into reactive oxygen species, which subsequently break down dye molecules. The role of the catalyst is to accelerate the process by acting as a bridge for the electron transfer between the dye molecules and adsorbed oxygen. It has been reported that the textural and structural properties of the catalyst play a key role in generating reactive oxygen species. In this work, we synthesized, characterized, and evaluated a series of strontium-based perovskite oxides for the catalytic degradation of azo dyes under dark conditions. The degradation of different dyes was studied in a batch reactor under various conditions, and the reaction progress was monitored by UV-vis absorption spectroscopy. The results showed that the degradation of azo dye was faster when the azo bond was weakened by either electron-withdrawing groups or due to the formation of a stable hydrazone structure. To evaluate the effect of structural defects on the oxygen dark activation process, cation non-stoichiometry was separately introduced in the parent perovskite SrFeO3 at both A and B sites. Under identical reaction conditions, the degradation efficiency of A-site deficient perovskite Sr0.90FeO3 (94 %) and B-site deficient SrFe0.80O3 (95 %) was higher than the stoichiometric perovskite SrFeO3 (46 %). These results demonstrate that cation deficiency in the SrFeO3 structure strongly favors the catalytic degradation of azo dyes via oxygen dark activation.

In situ fabrication of Ag decorated porous ZnO photocatalyst via inorganic-organic hybrid transformation for degradation of organic pollutant and bacterial inactivation

In this study, in situ silver (Ag) - porous ZnO photocatalysts were synthesized via solvothermal and post-annealing treatment. The formation of the porous ZnO structure due to the removal of organic moieties from the inorganic-organic hybrids Ag-ZnS(en)0.5 during the annealing process. The optimal Ag-ZnO photocatalyst showed excellent photocatalytic degradation activity, with 95.5% orange II dye and 97.2% bisphenol A (BPA) degradation under visible light conditions. Additionally, the photocatalytic inactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) led to a 97% inactivation rate after 2 h under dark conditions. Trapping experiments suggest that the superoxide anion (O2-) radicals are the main active species to degrade the organic dye. The improved photocatalytic dye degradation activity and inactivation of bacteria were attributed to the synergistic effect of Ag and porous ZnO structure, increased surface area, and efficiently separated the photoexcited charge carriers. This work could provide an effective strategy for the synthesis of porous structures toward organic pollutant degradation and bacterial inactivation in wastewater.

Strengthen Air Oxidation of Refractory Humic Acid Using Reductively Etched Nickel-Cobalt Spinel Catalyst

Nickel-cobalt spinel catalyst (NCO) is a promising catalyst for air oxidation of humic acid, which is a typical natural refractory organic matter and a precursor of toxic disinfection by-products. In this study, reductive etchers, NaBH4 or Na2SO3, were used to adjust the NCO surface structure to increase the performance. The modified catalyst (NCO-R) was characterized, and the relationship between its intrinsic properties and catalytic paths was discovered. The results of O2-temperature programmed desorption, NH3-temperature programmed desorption, and X-ray photoelectron spectroscopy (XPS) demonstrated that reductant etching introduced oxygen vacancies to the surface of NCO and increased active surface oxygen species and surface acidity. In addition, the modification did not change the raw hollow sphere structure of NCO. The crystallinity and specific surface area of NCO-R increased, and average pore size of NCO-R decreased. XPS results showed that the ratio of Co3+/Co2+ in NCO-R decreased compared with NCO, while the ratio of Ni3+/Ni2+ increased. The results of H2-temperature programmed reduction showed that the H2 reduction ability of NCO-R was stronger. Due to these changes in chemical and physical properties, NCO-R exhibited much better catalytic performance than NCO. In the catalytic air oxidation of humic acid at 25 °C, the total organic carbon (TOC) removal rate increased significantly from 44.4% using NCO to 77.0% using NCO-R. TOC concentration of humic acid decreased by 90.0% after 12 h in the catalytic air oxidation using NCO-R at 90 °C.

Flow anodic oxidation: Towards high-efficiency removal of aqueous contaminants by adsorbed hydroxyl radicals at 1.5 V vs SHE

Electrochemical advanced oxidation processes (EAOPs) have emerged as a promising water treatment alternative but major breakthroughs are still needed in order for EAOPs to be competitive with traditional treatment technologies in terms of energy cost. Most existing studies have been conducted at high potentials to generate the powerful hydroxyl radical oxidant (aqueous •OH). While adsorbed hydroxyl radicals (OH*) may form at a much lower energy cost, their possible utilization is limited due to the poor mass transfer of this highly reactive species on solid electrodes. In this report, we describe a novel flow anode system using 4-16 μm Magnéli phase titanium suboxide particles as the anode material which enables the generation of a high steady state •OH concentration (5.4 × 10^-12 mol m^-2) at only 1.5 V (vs SHE) in a dilute electrolyte (5 mM KH₂PO₄). The energy cost of removal per order of selected water contaminants (tetracycline and orange II in this study) using the flow anode is 1.5--6.7 Wh m^-3, which is 1 - 4 orders of magnitude lower than that of existing techniques. The anode material used demonstrates great stability with the configuration readily scaled up. The results of this study provide new insight into a high efficiency, low cost water treatment technology for organic contaminant degradation.

Improved dark ambient degradation of organic pollutants by cerium strontium cobalt perovskite

This work investigates the effect of cerium substation into strontium cobalt perovskites (CeSrCoO) for the oxidative degradation of Orange II (OII) in dark ambient conditions without the aid of any external stimulants such as light, heating or chemical additives. The OII degradation rate by CeSrCoO reached 65% in the first hour, whilst for the blank sample without cerium (SrCoO) took over 2 hr to reach the same level of OII degradation. Hence, the cerium substitution improved the catalytic activity of the perovskite material, mainly associated with the Ce_0.1Sr_0.9CoO₃ perovskite phase. Upon contacting CeSrCoO, the -NN- azo bonds of the OII molecules broke down resulting in electron donation and the formation of by-products. The electrons are injected into the CeSrCoO and resulted in a redox pair of Co³⁺/Co²⁺, establishing a bridge for the electron transfer between OII and the catalysts. Concomitantly, the electrons also formed reactive species (·OH) responsible for OII degradation as evidenced by radical trapping experiment. Reactive species were formed via the reaction between O₂ and donated electrons from OII with the aid of cobalt redox pair. As the prepared materials dispensed with the need for light irradiation and additional oxidants, it opens a window of environmental applications for treating contaminated wastewaters.

Controlled Fabrication of K2Ti8O17 Nanowires for Highly Efficient and Ultrafast Adsorption toward Methylene Blue

Advanced adsorbents need high adsorption rate and superior adsorption capability to clean up organic methylene blue (MB) from wastewater. We prepared K₂Ti₈O₁₇ nanowires grown along the [0 1 0] direction with a one-step hydrothermal method. The K₂Ti₈O₁₇ nanowires with tens of nanometers in diameter and tens of micrometers in length were achieved with smooth surfaces and twisted wire-like morphology. The K₂Ti₈O₁₇ nanowires exhibit high uptake capacity of ∼208.8 mg·g^-1 in the MB removal under equilibrium pH = 7. The adsorption equilibrium of MB onto the K₂Ti₈O₁₇ adsorbent is achieved with a 97% removal rate of MB within only ∼21 min, which is the shortest adsorption time among the recently reported inorganic adsorbents toward MB. The adsorption process has a good agreement with the well-known pseudo-second-order kinetic model (k₂ = 0.2) and the Langmuir isotherm model. Fourier transform infrared measurements suggest that the adsorption can be assigned to the hydrogen bonding and electrostatic attraction between MB and K₂Ti₈O₁₇. This ultrafast removal ability is due to the larger (0 2 0) interplanar spacing and zigzag surface structure of the nanowires, which provide abundant active adsorption sites. Thermodynamic parameters reflect the spontaneous, exothermic, and feasible uptake of MB. Besides, K₂Ti₈O₁₇ nanowires enjoy high adsorptive ability for chromium(VI) ions and photocatalytic removal toward NO. This work highlights the great significance of K₂Ti₈O₁₇ nanowires as a low-cost promising material used for the adsorptive elimination of organic contaminations in fast water purification on a large scale.

Engineering SrCuxO composition to tailor the degradation activity toward organic pollutant under dark ambient conditions

The composition of SrCu_xO mixed metal oxides (MMOs) was engineered via varying the amount of copper relative to strontium. As-synthesized SrCu_xO were highly active for degrading methyl orange (MO) pollutant at dark ambient conditions without the aid of other reagents. The catalytic activity of SrCu_xO demonstrated a reverse-volcano relationship with copper content. Copper-rich MMOs (SrCu₂O) exhibited the highest degradation activity for MO by far and degraded ca. 96% MO within 25 min. MO degradation over SrCu₂O was a surface-catalytic reaction and fitted pseudo-first-order reaction kinetics. The contact between MO molecules and catalyst surface initiated the reaction via the catalytic-active phase (Cu⁺/Cu²⁺ redox pair), which serves as an electron-transfer shuttle ([Formula: see text]) from MO to dissolved O₂, inducing the consecutive generation of reactive oxygen species, which resulted in MO degradation as evidenced by radical trapping experiment. XPS and XRD analysis revealed that active phases in SrCu₂O materials underwent irreversible transformation after reaction, contributing to the observed deactivation in the cycling experiment. The observations in this study demonstrate the significance of chemical composition tailoring in catalyst synthesis for environmental remediation under dark ambient conditions. Graphical abstract.