Improving photolytic treatments with electrochemical technology

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs)

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

On the performance of distinct electrochemical and solar-based advanced oxidation processes to mineralize the insecticide imidacloprid

Water contamination by contaminants of emerging concern is one of the main challenges to be solved by our desired sustainable society. In the same time, different technologies for water treatment are becoming enough mature to be implemented. In this work, two different advanced oxidation processes (AOP) were investigated: i) electrochemical processes (electrochemical, photoassisted electrochemical, electro Fered-Fenton, and photo-electro Fered-Fenton - PEF-Fered) using a BDD and DSA® electrodes under UVA and UVC irradiation (9 W) and ii) solar-based AOP using four distinct oxidants (HOCl, H₂O₂, S₂O₈^2-, HSO₅^-) in the presence or absence of Fe²⁺ ions to oxidize and mineralize imidacloprid (IMD: 50 mg L^-1) containing solutions. The PEF-Fered (1.0 mM Fe²⁺ and 50 mg L^-1 h^-1 H₂O₂) under UVA or UVC irradiation and HOCl/UVC (NaCl 17 mM) processes using a BDD and DSA® electrodes (10 mA cm ^-2), respectively, performed equally well to completely oxidize and mineralize (∼90%) IMD at the expense of only ∼0.3 kWh g^-1. Low amounts and highly oxidized byproducts identified through liquid chromatography tandem mass spectrometry were observed for the HOCl/UVC process using a DSA® electrode. Concerning the solar-based AOP, all assessed oxidants (4 mM h^-1) successfully oxidized IMD within 3 h of treatment, whereas only H₂O₂ and HOCl led to significant (∼60%) TOC abatement after 6 h treatment. The use of Fe²⁺ (0.5 or 1.0 mM) had no significant improvement in the oxidation and mineralization of IMD.

UV-irradiation and BDD-based photoelectrolysis for the treatment of halosulfuron-methyl herbicide

This paper reports the development of a novel photoelectrochemical (PEC) oxidation technique based on UV-C irradiation and boron-doped diamond (BDD) anode and its application for the effective removal of the commercial herbicide halosulfuron-methyl (HSM). The study evaluated the influence of the following key operating variables in the photoelectrochemical process: current density, pH, temperature, and initial HSM concentration. With regard to HSM degradation/mineralization, the application of high current densities was found to be more advantageous once it promoted a more rapid degradation and mineralization, with 96% of total organic carbon removal, though the process became more energy-demanding over time. The initial concentration of HSM did not modify the relative degradation rate, though the degradation process became more efficient as expected in a mass-transfer controlled process. The use of acidic pH (pH 3) was found to be more suitable than neutral conditions; this is probably because an anionic resonant form of HSM may be formed in neutral conditions. The temperature level was also found to affect the rate of HSM removal and the degradation efficiency. Finally, the substitution of Na₂SO₄ by NaCl promoted a more rapid and effective degradation; this is attributed to high production of powerful oxidants. However, only 70% mineralization was reached after 3 h of treatment; this is probably related to the formation of recalcitrant chlorinated sub-products.

Enhancement of UV disinfection of urine matrixes by electrochemical oxidation

This work focuses on the removal of antibiotic-resistant bacteria (ARB) contained in hospital urines by UV disinfection enhanced by electrochemical oxidation to overcome the limitations of both single processes in the disinfection of this type of effluents. UV disinfection, electrolysis, and photoelectrolysis of synthetic hospital urine intensified with K. pneumoniae were studied. The influence of the current density and the anode material was assessed on the disinfection performance of combined processes and the resulting synergies and/or antagonisms of coupling both technologies were also evaluated. Results show that the population of bacteria contained in hospital urine is only reduced by 3 orders of magnitude during UV disinfection. Electrolysis leads to complete disinfection of hospital urine when working at 50 A m^-2 using Boron Doped Diamond (BDD) and Mixed Metal Oxides (MMO) as anodes. The coupling of electrolysis to the UV disinfection process leads to the highest disinfection rates, attaining a complete removal of ARB for all the current densities and anode materials tested. The use of MMO anodes leads to higher synergies than BDD electrodes. Results confirm that UV disinfection can be enhanced by electrolysis for the removal of ARB in urine, considering both technical and economic aspects.

Sorption of Organic Pollutants by Humic Acids: A Review

Humic acids (HA) are promising green materials for water and wastewater treatment. They show a strong ability to sorb cationic and hydrophobic organic pollutants. Cationic compounds interact mainly by electrostatic interaction with the deprotonated carboxylic groups of HA. Other functional groups of HA such as quinones, may form covalent bonds with aromatic ammines or similar organic compounds. Computational and experimental works show that the interaction of HA with hydrophobic organics is mainly due to π-π interactions, hydrophobic effect and hydrogen bonding. Several works report that sorbing efficiency is related to the hydrophobicity of the sorbate. Papers about the interaction between organic pollutants and humic acids dissolved in solution, in the solid state and adsorbed onto solid particles, like aluminosilicates and magnetic materials, are reviewed and discussed. A short discussion of the thermodynamics and kinetics of the sorption process, with indication of the main mistakes reported in literature, is also given.