Synthesis of highly stable nanoscale MIL-53 MOF and its application for the treatment of complex mixed dye solutions and real-time dye industry effluent

The influence of electrolytes in the adsorption kinetics of reactive BF-5G blue dye on bone char: a mass transfer model

The discharge of harmful dyes in water bodies is a serious pollution problem, dangerous for the ecosystem's equilibrium and human health. In this sense, the aim of this work was to determine the influence of electrolytes (NaCl, KCl, CaCl2 and MgCl2) in the adsorption of Reactive Blue BF-5G dye, the most common dye used in industrial process for fabric colouring, using bovine bone char as the adsorbent. The bovine bone char was characterized by pH of point of zero charge (pHPZC), N2 adsorption-desorption isotherms, Fourier transform-infrared spectroscopy (FT-IR) and X-ray diffractometry (XDR). The characterization revealed a mesoporous structure (pore mean diameter of 94 Å and SBET ∼107 m2 g-1) with negative charge distribution at the surface (pHPZC = 3.8). The adsorption experiments revealed that the presence of KCl enhanced the material adsorption capacity (qmax = 195 mg g-1), that the Sips isotherm best fitted the experimental data (R2 > 0.9 except for KCl solution) and the adsorption process was mono- and multilayered. The kinetic adsorption experiments indicated that the inorganic electrolytes increased the initial adsorption velocity and the data was best modelled by the surface diffusional model (SDM), implying a resistance (aqueous > CaCl2 > NaCl > MgCl2 > KCl) to mass transfer at the surface of the pores which, in turn, prevented the dye diffusion to the interior of the adsorbent (qe = 71 mg g-1). Therefore, small quantities of KCl can be used to lower the mass transfer resistance and provide higher adsorption capacity with reduced time of operation, thus increasing the overall process efficiency.

An Anionic Porous Indium-Organic Framework with Nitrogen-Rich Linker for Efficient and Selective Removal of Trace Cationic Dyes

Metal-organic frameworks (MOFs) with porosity and functional adjustability have great potential for the removal of organic dyes in the wastewater. Herein, an anionic porous metal-organic framework (MOFs) [Me₂NH₂]₂In₂[(TATAB)₄(DMF)₄]·(DMF)₄(H₂O)₄ (HDU-1) was synthesized, which is constructed from a [In(OOC)₄]^- cluster and a nitrogen-rich linker H₃TATAB (4,4',4″-s-triazine-1,3,5-triyltri-p-aminobenzoic acid). The negatively charged [In(OOC)₄]^- cluster and uncoordinated -COOH on the linker result in one unit cell of HDU-1 having 8 negative sites. The zeta potential of -20.8 mV dispersed in pure water also shows that HDU-1 possesses negatively charged surface potential. The high electronegativity, water stability, and porosity of HDU-1 can facilitate the ion-exchange and Coulombic interaction. As expected, the HDU-1 exhibits high selectivity and removal rates towards trace cationic dyes with suitable size, such as methylene blue (MB) (96%), Brilliant green (BG) (99.3%), and Victoria blue B (VB) (93.6%).

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Rapid reduction of real-time industry effluent using novel CuO/MIL composite

In this study, a series of novel metal organic framework based composite materials was synthesized using a facile combustion synthesis method. The synthesized materials were characterized using standard analytical techniques for crystallite size, surface functional groups, surface area, porosity, optical properties, and particle size. The increase in the amount of CuO in the composite material resulted decrease in surface area and pore volume. The band-gap energy of the synthesized composites reduced with increase in the amount of CuO. Among the composite, 0.9 CuO:0.1 MIL displayed least emission intensity indicating lower electron-hole recombination and thereby superior charge separation of the material. The increase in the amount of CuO NPs in the composite resulted in increase in the average particle size and decrease in the zeta potential. As an application, the NaBH₄-mediated reduction of Methyl orange dye was studied using the synthesized materials. The increased amount of CuO in the composite resulted in the higher activity of the material. Highest activity was observed with the composite containing 9:1 ratio of CuO and MIL, and this material was further used to investigate the reduction of methylene blue, Rhodamine B, 4-nitrophenol, 2-nitrophenol, and 2, 4-dichlorophenol. The material exhibited excellent activity for all the selected organic pollutants. Finally, the composite containing 9:1 ratio of CuO and MIL was employed for the reduction of a real-time industry effluent and the observed results were encouraging. The reusability aspect of the synthesized material was investigated. Based on the LC-MS analysis, a possible reduction mechanism is proposed.