A tree-grapes-like PTFE fibrous membrane with super-hydrophobic and durable performance for oil/water separation

Photothermal and Concus Finn capillary assisted superhydrophobic fibrous network enabling instant viscous oil transport for crude oil cleanup

Rapid and effective removal of highly viscous oil spills from the sea remains a great challenge globally. Superhydrophobic materials are attractive candidates for handling oil spills, but they are restrained to recover oils with low viscosity exclusively. Herein, we report a novel polypyrrole wrapped superhydrophobic fibrous network using cross-shaped polyester fibers as starting blocks. The polypyrrole coating enables the absorbent to convert light to heat, ensuring that the viscosity of heavy oils in the proximity can be easily controlled. In the meanwhile, the special structure of the starting fibers initiates Concus Finn (CFin) capillary allowing instant oil transport in the network. When the absorbent is exposed to light oils (0-500 mPa.s), the oils can be transported instantly via CFin capillary. Interestingly, under synergistic effect of light-to-heat conversion and CFin capillary, a drawing-sticking crude oil strip (10⁵ mPa.s) is sucked instantly against gravity by the absorbent. The absorbent is successfully applied to efficiently separate both oil/water mixtures and oil/water emulsions (efficiency > 99%). Such absorbent can absorb 62.99-74.23 g/g light oils on average and up to 123.3 g/g crude oil under 0-2 sun illumination, holding a huge potential in managing oil spills.

Green Preparation of a Carboxymethyl Cellulose-Coated Membrane for Highly Efficient Separation of Crude Oil-In-Water Emulsions

Developing high-performance membranes is an extremely significant strategy to combat increasing severe oil pollution. However, most of the previously reported superwettable membranes have been inevitably involved with the use of toxic solvents and complicated preparation processes. In addition, most of them lacked the capacity of separating crude oil-in-water emulsions. Herein, a facile and green strategy is employed to fabricate a polytetrafluoroethylene (PTFE) membrane with a mixed suspension of PDA@ZIF-8 and carboxymethyl cellulose (CMC) using water as a solvent via the vacuum filtration method. Combining hydrophilic property with micro-nano-roughness, the CMC-PDA@ZIF-8-coated PTFE membrane (CPZP membrane) exhibits excellent underwater superoleophobicity. More importantly, the separation efficiency of various surfactant-stabilized oil-in-water emulsions including crude oil/water emulsion is higher than 99.2% with a flux up to 1306.5 L m^-2 h^-1, and the separation performance remains nearly the same after 10 cycles. Moreover, outstanding underwater superoleophobic and self-cleaning properties are maintained after long-distance sandpaper abrasion and multiple bending tests. Meanwhile, its exceptional separation performance is still maintained in harsh environments (3.5 wt % NaCl, 1 M HCl, 60 °C hot water) even after immersing it for 24 h. Therefore, this green-prepared and high-performance membrane has tremendous application prospects in treating oily wastewater.

Biomass poplar catkin fiber-based superhydrophobic aerogel with tubular-lamellar interweaved neurons-like structure

Superhydrophobic aerogels are attractive candidates in controlling oil spills. The major challenges for existing aerogels are the construction of mechanical endurance as well as accessible of building materials. Herein, a newfangled biomass superhydrophobic aerogel (M-PCF/CS) with both superior compressibility and oil caption speed is fabricated by assembling poplar catkin fiber (PCF) hollowed-out shell of 330 nm and chitosan (CS) into tubular-lamellar interweaved neurons-like structure. The resultant aerogels (porosity ~ 96.12%), with flexuous PCF as the elastic buffer and second-pore capillaries, exhibit large longitudinal and transverse compressibility, endurable fatigue tolerance, fast oil sorption rate with a capacity of 28.8-78.1 g/g at 5-25 s. In parallel, the aerogels are tolerant of NaCl, UV radiation, and organic solvents without superhydrophobic variation and a case of oil spill remediation via pump-supported experiment shows that the aerogels facilely achieve continuous oil recycling from seawater by 23052-43956 L·m^-2·h^-1. Furthermore, the resultant M-PCF/CS, with assistance of an oscillator, can be applied to separate oil/water emulsions with efficiency of 98.07-99.11%. The successful fabrication of this material provides a new design strategy for the construction of mechanically robust aerogels for speedy and economical cleanup of oil pollutants from water.

Cross-Linking of Centrifugally Spun Starch/Polyvinyl Alcohol (ST/PVA) Composite Ultrafine Fibers and Antibacterial Activity Loaded with Ag Nanoparticles

In this research, centrifugally spun ultrafine composite starch/polyvinyl alcohol (ST/PVA) fibers with high water stability were prepared by cross-linking with a mixture of glutaraldehyde and formic acid in the form of vapor phase. The effect of cross-linking temperature combined with time on the water stability, crystal structure, and thermal properties of fibers was investigated to obtain the optimum parameters. On this basis, we further prepared Ag-loaded ST/PVA fibers with different contents of nano silver. The structure and properties of Ag-loaded fibers, which cross-linked under the optimum parameters, were analyzed. As a result, the Ag-loaded fibers exhibited excellent water stability and mechanical properties and possessed inhibition zone diameters of 3 and 2 mm to Escherichia coli and Staphylococcus. aureus, respectively. The antibacterial property of the Ag-loaded ST/PVA fibers provided a new route for developing less costly antibacterial fiber materials in the future.