Mechanistic investigation of rapid catalytic degradation of tetracycline using CoFe2O4@MoS2 by activation of peroxymonosulfate

0D/2D dual Fenton α-Fe2O3/Fe-doped g-C3N4 photocatalyst and the synergistic photo-Fenton catalytic mechanism insight

A novel dual Photo-Fenton photocatalyst Fe2O3-Fe-CN with excellent Fe(III)/Fe(II) conversion efficiency and trace metal ion leaching rate has been fabricated by in-situ deposition of α-Fe2O3 quantum dots on ultrathin porous Fe-doped carbon nitride (Fe-CN) nanosheets. The iron species in Fe-CN and α-Fe2O3 QDs constitute a mutually reinforcing dual Photo-Fenton effect. The 4% Fe2O3-Fe-CN showed superior performance with kobs values 8.60 and 4.80 folders greater than pure CN and Fe-CN, respectively. The synergistic effect between α-Fe2O3 QDs and the ultrathin porous structure of Fe-CN is the primary reason for the outstanding catalytic performance exhibited by α-Fe2O3/Fe-CN. On one hand, the ultrathin porous structure of Fe-CN promotes the rapid transfer of photogenerated electrons. On the other hand, the efficient photogenerated charge separation at the α-Fe2O3/Fe-CN interface enables more photogenerated electrons to participate in the Fe3+/Fe2+ conversion and H2O2 activation. The trapping experiments demonstrate that •OH and •O2- are the primary active species in TC degradation. This work presents novel insights into the design of efficient heterogeneous Fenton catalysts for practical applications.

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Underwater bubbling plasma (UBP) coupled with diatomite-CoFe2O4 (Dt-CFO) activated peroxymonosulfate (PMS) was proposed for the degradation of ciprofloxacin hydrochloride (CIP) in this work. The catalyst sample of Dt-CFO with large specific surface area, rich active sites and excellent magnetic property was prepared by the hydrothermal method and systematically characterized to investigate its material properties. The combination of UBP and Dt-CFO activated PMS (UBP/Dt-CFO/PMS) showed excellent synergy with the synergistic factor of 1.98, and reached the CIP degradation percentage of 94.7%, which corresponded to the kinetic constant of 0.097 min-1. Dt-CFO with the diatomite content of 30 wt% achieved the best catalytic activity in the reaction system. Higher catalyst and PMS dose, peak voltage, pulse frequency and lower initial CIP concentration were beneficial for CIP removal. The addition of Cl-, HCO3-, SO42- and humic acid suppressed CIP degradation, while NO3- had no effect on CIP removal. The Dt-CFO composite exhibited excellent reusability and low leaching metal amount, demonstrating its good stability. SO4-·, ·OH, ·O2-, 1O2, eaq, O3 and H2O2 were the active species confirmed to be involved in CIP degradation. The redox circles of ≡ Co(Ⅱ)/≡Co(Ⅲ) and ≡ Fe(Ⅱ)/≡Fe(Ⅲ) on Dt-CFO surface and the plasma-induced physicochemical effects dominated PMS activation. The decomposition process of CIP was explored through fluorescence spectra. Three degradation pathways were inferred, and the toxicity analysis showed the toxicity of CIP solution weakened after discharge treatment.

Sulfur-doped activated carbon for the efficient degradation of tetracycline with persulfate: Insight into the effect of pore structure on catalytic performance

Sulfur-doped activated carbon has proved to be a promising metal-free catalyst for persulfate (PDS) catalytic activation for the oxidation of aqueous refractory organics. Herein, sulfur-doped porous carbon (ACS) catalysts with different pore structures and doped-S contents were prepared via a template method using d(+)-glucose as the carbon source, sulfur as the sulfur source, and nano-MgO with different particle sizes as templates. Characterization results showed that the particle size of MgO significantly affects the pore structure and doped-S content of ACSs catalysts: a sample synthesized with 20 nm MgO as template (ACS-20) presented the highest content of doped-S and a mesoporous structure, which endowed it with superior adsorption and catalytic performance toward tetracycline (TC) removal. The effect of catalyst dosage, TC concentration, PDS concentration and solution pH on TC removal efficiency were evaluated. The reaction mechanism, investigated by combination of EPR, quenching experiments and LC-MS, indicated that the reactive species included HO·, SO4˙-, and 1O2, but that 1O2 played the dominant role in TC oxidation through a non-radical oxidation pathway. In addition, the reusability and regeneration properties of the ACS-20 catalyst were also studied. This work provides a promising strategy and some theoretical basis for the design and preparation of activated carbon catalysts for advanced oxidation reactions from the viewpoint of pore structure design and S-doping.

Magnetic MoS2/Fe3O4 composite as an effective activator of persulfate for the degradation of tetracycline: performance, activation mechanisms and degradation pathways

The activated persulfate (PS) process could produce sulfate radical (SO4·-) and rapidly degrade organic pollutants. The application of Fe3O4 as a promising PS activator was limited due to the rapid conversion of Fe2+ to Fe3+ on its surface. Mo4+ on MoS2 surface could be used as a reducing site to convert Fe3+ to Fe2+, but the separation and recovery of MoS2 was complex. In this study, MoS2/Fe3O4 was prepared to accelerate the Fe3+/Fe2+ cycle on Fe3O4 surface and achieved efficient separation of MoS2. The results showed that MoS2/Fe3O4 was more effective for PS activation compared to Fe3O4 or MoS2, with a removal efficiency of 91.8% for 20 mg·L-1 tetracycline (TC) solution under the optimal conditions. Fe2+ and Mo4+ on MoS2/Fe3O4 surface acted as active sites for PS activation with the generation of SO4•-, •OH, •O2-, and 1O2. Mo4+ acted as an electron donor to promote the Fe3+/Fe2+ cycling and thus improved the PS activation capability of MoS2/Fe3O4. The degradation pathways of TC were inferred as hydroxylation, ketylation of dimethylamino group and C-N bond breaking. This study provided a promising activated persulfate-based advanced oxidation process for the efficient degradation of TC by employing MoS2/Fe3O4 as an effective activator.

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

Peroxymonosulfate (PMS), which is dominated by non-free radical pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a biodegradable cobalt-based catalyst (Co3O4/MoS2@NCS) was synthesized by a simple hydrothermal method with chitosan (CS) as nitrogen‑carbon precursor and doped with Cobaltic‑cobaltous oxide (Co3O4) and Molybdenum disulfide (MoS2), and was used to activate PMS to degrade dye wastewater. Electrochemical tests showed that Co3O4/MoS2@NCS exhibited higher current density and cycling area than MoS2@NCS and MoS2. In the Co3O4/MoS2@NCS/PMS system, the degradation rate of 30 mg·L-1 rhodamine B (RhB) reached 97.75 % within 5 min, and kept as high as 94.34 % after 5 cycles. Its rate constant was 1.91 and 8.37 times that of MoS2@NCS/PMS and MoS2/PMS, respectively. It had good complex background matrices and acid-base anti-interference ability, and had good universality and reusability. The degradation rate of methyl orange (MO) and methylene blue (MB) were more than 91 % within 5 min at pH 4.8. The experimental results demonstrated that MoS2-modified CS as a carrier exposed a large number of active sites, which not only dispersed Co3O4 nanoparticles and improved the stability of the catalyst, but also provided abundant electron rich groups, and promoted the activation of PMS and the production of reactive oxygen species (ROS). PMS was effectively activated by catalytic sites (Co3+/Co2+, Mo4+/Mo5+/Mo6+, CO, pyridine N, pyrrole N, hydroxyl group and unsaturated sulfur), producing a large number of radicals that attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, non-free radical 1O2 was the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient MoS2-modified cobalt-based catalysts.

MoS2-based nanocomposites and aerogels for antibiotic pollutants removal from wastewater by photocatalytic degradation process: A review

Photocatalytic technologies based on molybdenum disulfide (MoS2) catalysts are effective, eco-friendly, and promising for antibiotic pollutants treatment. The technologies used by MoS2-based nanocomposites and aerogels for efficient degradation of antibiotics are reviewed in detail for the first time in this paper. The fundamental aspects of MoS2 were comprehensively scrutinized, encompassing crystal structure, optical properties, and photocatalytic principle. Then, the main synthesized methods and advantages/disadvantages for the preparation of MoS2-based nanocomposites and aerogels were systematically presented. Besides, a comprehensive overview of diverse MoS2-based nanocomposites and aerogels photo-degradation systems that enhanced the degradation of antibiotic pollutants were revealed. Meanwhile, the photo-degradation mechanism concentrated on the photoelectron transfer pathways and reactive oxygen species (ROS) were systematically evaluated. Finally, the challenges and perspectives for deeply development of MoS2-based nanocomposites and aerogels were discussed. This review may help researchers to deeply understand the research status of MoS2-based nanocomposites and aerogels for antibiotics removal, and makes clear the photo-degradation mechanism from photoelectron transfer pathways and ROS aspects of MoS2-based nanocomposites and aerogels.

Peroxymonosulfate activation by walnut shell activated carbon supported nano zero-valent iron for the degradation of tetracycline: Performance, degradation pathway and mechanism

In this study, activated carbon (WS-AC) was prepared from walnut shell. Nano-zero-valent iron (nZVI) was loaded on walnut shell activated carbon by liquid phase reduction method and used as catalyst (WS-AC/nZVI) to activate peroxymonosulfate (PMS) to efficiently degrade tetracycline (TC) in solution. The composite material with a mass ratio of WS-AC to nZVI of 1:1 has the highest catalytic performance for activating PMS to degrade TC. The results showed that under the conditions of TC concentration of 100 ppm, PMS dosage of 0.2 mM and WS-AC/nZVI dosage of 0.1 g/L, the removal efficiency of TC could reach 81%. Based on quenching experiments and electron spin resonance (EPR), it was verified that •OH, SO4•- and 1O2 bound on the catalyst surface were the main reactive oxygen species during the reaction. The intermediate products of TC were identified by liquid chromatography-mass spectrometry (HPLC-MS) and DFT calculation, and the possible degradation pathway of TC was proposed. The catalyst still maintained high removal efficiency of TC after four cycles of experiments, and the minimal iron loss on the surface of the catalyst indicated that it had good stability. The efficient and stable WS-AC/nZVI activated PMS showed great potential in the degradation of antibiotics.

Architecture engineering of Fe/Fe2O3@MoS2 enables highly efficient tetracycline remediation via peroxymonosulfate activation: Critical roles of adsorption capacity and redox cycle regulation

Design and synthesis of high-efficiency multicomponent nanostructure for activating peroxymonosulfate (PMS) to destruct emerging antibiotics remains a daunting challenge. We report herein the simplest one-step hydrothermal construction of hierarchical Fe/Fe2O3@MoS2 architecture composed of MoS2 nanosheets integrated commercial Fe2O3 nanoparticles. The fabricated Fe/Fe2O3@MoS2 architecture can be utilized as an efficient PMS activator to destruct tetracycline hydrochloride (TCH) with a removal efficiency of 90.3 % within 40 min, outperforming Fe2O3 nanoparticles, MoS2 nanosheets analogues and many MoS2-based materials. The Fe/Fe2O3@MoS2/PMS works well under various reaction conditions, and SO4•- and 1O2 are identified as major reactive oxygen species. Thirteen intermediates towards TCH destruction are detected via four pathways, and their acute/chronic toxicity and phytotoxicity are assessed. The origins of Fe/Fe2O3@MoS2/PMS system for efficient degrading TCH are ascribed to the synergy catalysis between Fe2O3 and MoS2, which originate from: (a) the exposed Mo4+ sites on catalyst surface facilitating high-speed electron transfer from MoS2 to Fe3+ and accelerating the Fe2+ regeneration; (b) the generated Fe0 serving as an excellent electron donor to jointly promote Fe3+/Fe2+ redox cycle. This study provides a simple way to establish architecture for synergistically promoting PMS-mediated degradation.

Cellulose beads supported CoFe2O4: A novel heterogeneous catalyst for efficient rhodamine B degradation via advanced oxidation processes

In this study, a novel mechanical process was used to produce cellulose beads (CB). These beads were then doped with cobalt ferrite nanoparticles (CoFe2O4 NPs) to serve as catalysts for the degradation of rhodamine B (RhB) through peroxymonosulfate (PMS) activation. The physical and chemical properties of CoFe2O4 and CoFe2O4@CB catalysts were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) combined with energy dispersive X-ray spectrometer (EDX), scanning transmission electron microscopy (STEM) techniques, and thermogravimetric analysis (TGA). To optimize RhB degradation efficiency, Response Surface Methodology (RSM) was employed, utilizing the Box-Behnken design (BBD). Under the optimized conditions of a catalyst dosage of 0.40 g/L, PMS dosage of 0.98 mM, RhB concentration of 40 mg/L, pH of 5.27, and reaction time of 60 min, a remarkable degradation efficiency of 98.51 % was achieved at a temperature of 25 °C. In quenching experiments, 1O2, SO4•-, and HO• species are produced in the CoFe2O4@CB/PMS system, with 1O2, and SO4•- species dominating RhB degradation. Remarkably, the new CoFe2O4@CB catalyst has demonstrated exceptional stability and reusability, validated by recycling tests (up to 78 % of RhB degradation efficiency after a 5-cycle experiment) and subsequent characterizations (FTIR, SEM, and EDX) emphasizing unchanged bands, uniform distribution, and consistent composition after reuse cycles. These results demonstrate the effectiveness of mechanically produced CoFe2O4@CB catalysts for advanced oxidation processes (AOPs), with promising applications in wastewater treatment.

Heteroatom-modulated NiCo2O4 apparent energy activation of PMS for tetracycline removal: Mechanism and toxicity analysis

Heteroatom doping to reconfigure the electronic structure of heterogeneous catalysts is expected to lead to the development of advanced oxidation water purification materials with superior performance and greater stability. Herein, a series of catalysts with different elemental doping was developed by a simple and environmentally friendly one-step self-propagating combustion method to remove Tetracycline (TC). After S-doping, the normalized kinetic constant of TC was significantly increased from 30.49 to 159.41 min-1M-1 within 30 min, which is even higher than most recent heterogeneous catalysts. The prepared S-doped NiCo2O4 (NCO-S) exhibits an extremely promising catalytic performance for oxidation (92.8 %) and mineralization (65.9 %) of TC in a wide pH range (3-11). The resistance to interference is excellent for inorganic ions and even in real water samples. Quenching experiments, electron paramagnetic resonance (EPR), and electrochemical analyses demonstrated that the non-radical oxidation pathway, including electron transfer and 1O2, dominated the degradation process after S doping. It is speculated that possible intermediates and toxicological studies are discussed, finding that the overall degradation process is moving towards low toxicity to reveal prospects for large-scale applications. This work not only provides a way to remove TC, but may also inspire the design of more efficient and stable materials for water treatment and other applications.

Selective degradation of organic micropollutants by activation of peroxymonosulfate by Se@NC: Role of Se doping and nonradical pathway mechanism

In this study, Se@NC-x decorated with Se was successfully prepared via two-step calcination with zeolitic imidazole framework (ZIF) as a precursor. Mechanistic studies show that PMS would be adsorbed onto the surface of Se@NC-900 to form an active complex (Se@NC-900/PMS*), and the active Se@NC-900/PMS* could oxidize phenol by the rapid decomposition of PMS. Specifically, electrons are extracted by Se@NC-900/PMS* and then transferred to the surface of Se@NC-900, which can trigger the degradation of phenol. Notably, it is found that the local charge redistribution caused by the doping of Se can activate the catalytic potential of the intrinsically inert carbon skeleton through density flooding theory (DFT) calculations. The XLogP, ΔE, VIP, and E_{LUMO (Se@NC/PMS)-HOMO (pollutants)} and degradation rate constants of different micropollutants were correlated well linearly. This indicates that the Se@NC-900/PMS system has a great selectivity for the degradation of pollutants. Overall, these findings not only illustrate the role of Se in tuning the electronic structure of Se@NC-x to enhance the activation of PMS, but also bridge the gap in our knowledge about the physicochemical properties and degradation performance of Se@NC catalysts.

Efficient carbamazepine degradation with Fe3+ doped 1T/2H hybrid molybdenum disulfide as peroxymonosulfate activator under high salinity wastewater

Drawing on the robust activation activity and affinity that transition metal ions and MoS₂ exhibit towards peroxymonosulfate (PMS), 1T/2H hybrid molybdenum disulfide doped with Fe³⁺ (Fe³⁺/N-MoS₂) was synthesized to activate PMS for the treatment of organic wastewater. The ultrathin sheet morphology and 1T/2H hybrid nature of Fe³⁺/N-MoS₂ were confirmed by characterization. The (Fe³⁺/N-MoS₂ + PMS) system demonstrated excellent performance in the degradation of carbamazepine (CBZ) above 90% within 10 min even under high salinity conditions. By electron paramagnetic resonance and active species scavenging experiments, it was inferred that SO₄^•─ palyed a dominant role in the treatment process. The strong synergistic interactions between 1T/2H MoS₂ and Fe³⁺ efficiently promoted PMS activation and generated active species. Additionally, the (Fe³⁺/N-MoS₂ + PMS) system was found to be capable of high activity for CBZ removal in high salinity natural water, and Fe³⁺/N-MoS₂ exhibited high stability during recycle tests. This new strategy of Fe³⁺ doped 1T/2H hybrid MoS₂ for more efficient PMS activation provides valuable insights for the removal of pollutants from high salinity wastewater.

Applications of vacancy defect engineering in persulfate activation: Performance and internal mechanism

The vacancy defects in heterogeneous catalysts have received extensive attention for persulfate (PS) activation. Vacancy defects can tune the electronic structure of metal oxides and generate unsaturated coordination sites. Meanwhile, the adsorption energy of reactants on catalyst surface is optimized. Thereby, the reaction energy barrier between catalysts and PS decreases, which could promote catalytic activation and accelerate pollutants degradation. Nowadays, oxygen vacancy (OV), nitrogen vacancy (NV), sulfur vacancy (SV), selenium vacancy (SeV) and titanium vacancy (TiV) have been widely studied with great potential for water remediation. So far, no review was reported regarding the vacancy activated persulfate systems. This paper summarized the types, preparation, mechanism and applications of vacancy in PS systems systematically. In addition, we put forward possible development of vacancy engineering in PS activation systems. It is expected that this review will contribute to the controllable synthesis and applications of vacancies in catalysts for PS activation and contaminants removal.

In-situ preparation of yeast-supported Fe0@Fe2O3 as peroxymonosulfate activator for enhanced degradation of tetracycline hydrochloride

Nano zero-valent iron (nZVI) is extensively used as a peroxymonosulfate (PMS) activator but suffers from the ease of oxidation and agglomeration due to its high surface energy and inherent magnetism. Here, green and sustainable yeast was selected as a support material to firstly in-situ prepare yeast-supported Fe⁰@Fe₂O₃ and used for activating PMS to degrade tetracycline hydrochloride (TCH), one of the common antibiotics. Due to the anti-oxidation ability of the Fe₂O₃ shell and the support effect of yeast, the prepared Fe⁰@Fe₂O₃/YC exhibited a superior catalytic activity for the removal of TCH as well as some other typical refractory contaminants. The chemical quenching experiments and EPR results demonstrated SO₄^•- was the main reactive oxygen species while O₂^•-, ¹O₂ and ^•OH played a minor role. Importantly, the crucial role of the Fe²⁺/Fe³⁺ cycle promoted by the Fe⁰ core and surface iron hydroxyl species in PMS activation was elucidated in detail. The TCH degradation pathways were proposed by LC-MS and density functional theory (DFT) calculation. In addition, the outstanding magnetic separation property, anti-oxidation ability, and high environmental resistance of the catalyst were demonstrated. Our work may inspire the development of green, efficient, and robust nZVI-based materials for wastewater treatment.

Piezoelectric materials and techniques for environmental pollution remediation

With the rapid development of industrialization and agriculture, a series of critical imminent environmental problems and water pollution have caught wide attention from the public and society. Piezoelectric catalysis technology with piezoelectric materials is a green and environmental method that can efficiently improve the separation of electron-hole pairs, then generating the active substances such as OH, H₂O₂ and O₂^-, which can degrade water pollutants. Therefore, we firstly surveyed the piezoelectric catalysis in piezoelectric materials and systematically concluded and emphasized the relationship between piezoelectric materials and the piezoelectric catalytic mechanism, the goal to elucidate the effect of polarization on piezoelectric catalytic performance and enhance piezoelectric catalytic performance. Subsequently, the applications of piezoelectric materials in water treatment and environmental pollutant remediation were discussed including degradation of organic pollutants, removal of heavy mental ions, radionuclides, bacteria disinfection and water splitting for H₂ generation. Finally, the development prospects and future outlooks of piezoelectric catalysis were presented in detail.

Strategy for oxygen vacancy enriched CoMn spinel oxide catalyst activated peroxodisulfate for tetracycline degradation: process, mechanism, and toxicity analysis

Antibiotic-like organic pollutants are harmful to aquatic ecosystems and seriously disrupt the ecological balance. Herein, we propose a simple and versatile method to prepare cobalt-manganese oxides with high specific surface area and abundant oxygen vacancies using low-temperature reduction crystallization, which greatly facilitates the adsorption and electron transfer between the catalyst, PDS, and TC, thus accelerating the degradation of tetracycline (TC). Among them, the degradation efficiency of TC in the CoMn₂O₄(C)/PDS system was 99.8% in 60 min and the degradation rate remained above 90% after four cycles. The possible degradation mechanism is also discussed, where Co is the main metal active center of the catalyst and Mn plays an auxiliary catalytic role to promote the generation of reactive radicals in PDS through redox interactions between Co and Mn, where SO₄ ^-˙ is the main active species for TC degradation. Finally, the possible degradation pathways of TC are proposed and the toxicity of the intermediates is evaluated. Findings from this work will shed light on the rational design of bimetallic oxide catalysts.

Ultrafast degradation of SMX and TC by CoSiO x activated peroxymonosulfate: efficiency and mechanism

To address the concern about residual antibiotics in effluent of sewage treatment plants, cobalt silicate (CoSiO _x ) was prepared by hydrothermal method and employed as an activator of peroxymonosulfate (PMS) for the rapid degradation of antibiotics. Taking sulfamethoxazole (SMX) and tetracycline (TC) as representatives of antibiotics, the effects of operation parameters (CoSiO _x and PMS dosage) and water quality parameters (temperature, solution pH, bicarbonate, chloride, and natural organic matter) on degradation of target pollutants by a CoSiO _x activated PMS process (CoSiO _x /PMS) were investigated. The mechanism involved in the interaction of CoSiO _x and PMS was also elucidated. The results indicated that CoSiO _x /PMS can degrade SMX and TC at fast pseudo-first-order rate constants (0.47 and 0.56 min^-1 respectively) under optimal conditions. Increasing the dosage of PMS and CoSiO _x appropriately was beneficial to the degradation of antibiotics. Chloride, bicarbonate, and HA showed negative effects on the degradation process due to their free radical-scavenging ability and were ranked as chloride < bicarbonate < HA. Abundant [triple bond, length as m-dash]Co-OH_s and oxygen vacancies on the surface of CoSiO _x contributed to its excellent activation capability towards PMS. The radical scavenging experiments indicated that target pollutant degradation mainly resulted from the attack of sulfate radicals (43.0% contribution) and hydroxyl radicals (52.9% contribution). The practicality of CoSiO _x /PMS was verified by continuous flow test. This study provides a cheap, highly efficient, and feasible advanced depollution method based on CoSiO _x .

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

High-efficient peroxymonosulfate activation for rapid atrazine degradation by FeSx@MoS2 derived from MIL-88A(Fe)

FeS_x@MoS₂-x (FM-x, x implied real Mo/Fe content ratios) in which FeS_x derived from MIL-88A deposited on the surface of MoS₂ with a tight heterogeneous interface were synthesized for peroxymonosulfate (PMS) activation to degrade atrazine (ATZ). The catalytic performance of FM-0.96 was greatly improved due to the rapid regeneration of Fe²⁺ resulting from the interfacial interaction. FM-0.96 could completely degrade 10.0 mg/L ATZ within 1.0 min, and the toxicities for most of its intermediates were greatly reduced. The k value of FM-0.96 was 320 and 40 times higher than that of the MoS₂ and FeS_x, respectively. The SO₄·^-, ·OH and ¹O₂ were mainly responsible for ATZ degradation in FM-0.96/PMS system, and the conversion pathway of ¹O₂ was analyzed. Furthermore, the long-term continuous operation for ATZ degradation was achieved using a fixed membrane reactor. This work provides deep insights into metal sulfide composites derived from metal-organic frameworks for removing pollutants by activating PMS.