Extracellular laccase production and its optimization from Arthrospira maxima catalyzed decolorization of synthetic dyes

Biochemical Characterization of Laccase from Spirulina CPCC-695 and Their Role in Estrone Degradation

The addition of exogenous endocrine disrupting compounds (EDCs) like estrone, in the food chain through the aquatic system, disrupts steroid biosynthesis and metabolism by altering either the genomic or non-genomic pathway that eventually results in various diseases. Thus, bioremediation of these compounds is urgently required to prevent their addition and persistence in the environment. Enzymatic degradation has proven to be a knight in shining armour as it is safe and generates no toxic products. The multicopper oxidases (E.C. 1.10.3.2 benzenediol: oxygen oxidoreductase), laccase with the potential to degrade both phenolic and non-phenolic substrates has recently gained attention. In this study, the laccase was purified, characterized, and used to study estrone degradation. The culture filtrate (crude laccase) was concentrated and precipitated using cold-acetone and dialyzed against tris buffer (50 mM) giving a four-fold partially purified form, with 45.56% yield and 204.14 U/mg as specific activity and a single peak at 250-300 nm. The partially purified laccase was approximately 80 kDa as estimated by SDS-PAGE preferred ABTS as substrate. Both crude and partially purified laccase showed maximum activity at pH 3.0, 40 °C, and 4 mM ABTS. Kinetic constants (Km, Vmax) of crude and partially purified laccase were found to be 0.83 mM; 494.31 mM/min, and 0.58 mM; 480.54 mM/min respectively. Iron sulphate and sodium azide inhibited laccase maximally. Crude and partially purified laccase degradation efficiency was 87.55 and 91.35% respectively. Spirulina CPCC-695 laccase with efficient estrone degradation ability renders them promising candidates for EDCs bioremediation.

Biodegradation of plastics by white-rot fungi: A review

Plastic pollution is one of the most environmental problems in the last two centuries, because of their excessive usage and their rapidly increasing production, which overcome the ability of natural degradation. Moreover, this problem become an escalating environmental issue caused by inadequate disposal, ineffective or nonexistent waste collection methods, and a lack of appropriate measures to deal with the problem, such as incineration and landfilling. Consequently, plastic wastes have become so ubiquitous and have accumulated in the environment impacting ecosystems and wildlife. The above, enhances the urgent need to explore alternative approaches that can effectively reduce waste without causing harsh environmental consequences. For example, white-rot fungi are a promising alternative to deal with the problem. These fungi produce ligninolytic enzymes able to break down the molecular structures of plastics, making them more bioavailable and allowing their degradation process, thereby mitigating waste accumulation. Over the years, several research studies have focused on the utilization of white-rot fungi to degrade plastics. This review presents a summary of plastic degradation biochemistry by white-rot fungi and the function of their ligninolytic enzymes. It also includes a collection of different research studies involving white-rot fungi to degrade plastic, their enzymes, the techniques used and the obtained results. Also, this highlights the significance of pre-treatments and the study of plastic blends with natural fibers or metallic ions, which have shown higher levels of degradation. Finally, it raises the limitations of the biotechnological processes and the prospects for future studies.

Optimisation and physicochemical characterisation of a thermo-alkali stable laccase produced by wastewater associated Bacillus sp. NU2

Laccase is a multicopper enzyme that plays a unique role in bioremediation of environmental pollutants. Bacteria were isolated from hospital wastewater and screened for laccase production. The laccase production process condition was optimised, and the laccase obtained was characterised. The 16S rRNA molecular analysis conducted on the best laccase producer revealed a Bacillus sp. NU2 identified. The process conditions: pH5, 45°C, 100 rpm, 5% inoculum, and growth constituents viz: tangerine peel and wheat bran agro-wastes, beef extract, ammonium persulfate, glucose, galactose, xylose, sorbitol, fructose carbon sources; and 4-aminophenol inducer optimally stimulated laccase production. The Bacillus sp. NU2 laccase was optimal at pH and temperature conditions of 8.0°C and 60°C, with a noteworthy pH and thermal stability observed. Furthermore, NU2 laccase showed a moderate/high tolerance and relative activity effect on various chemical inhibitors, halides and surfactant of triton x-100 (105 ± 0.92%), PMSF (107 ± 0.81%), and NaCl (94 ± 0.81%) at 1, 3, and 6 (mM) concentration. Additionally, NU2 laccase maintained a relative activity of 101%, 104%, and 102% for Mg2+, Zn2+, and Fe3+ at 1, 3, and 6 mM respectively. Acetone and propanol significantly upregulated laccase activity at 114 ± 0.0008% and 118.24 ± 0.35 and also at 30 and 20 (%) concentrations. Conclusively, the tolerant effect of Bacillus sp. NU2 laccase in pH, temperature, inhibitors and organic solvents suggests its potential for biotechnological application and promotion of a greener environment.

Yellow laccase produced by Trametes versicolor K1 on tomato waste: A comparative study with the blue one produced on semi-synthetic medium

Laccase production by fungal growth on agrifood waste is still poorly studied. Trametes versicolor K1 isolated from palm bark produced a yellow non glycosylated laccase from tomato waste based medium (TMT) and a blue glycosylated laccase on glucose medium (GLU). Lignocellulosic biomass, such as pinecones (PIN), palm leaves (PLM), olive pomace (OLV), and alfa stems (ALF) have also been used as growth medium for T. versicolor K1. In these conditions, very low or no laccase production was observed. When peptone was supplied in TMT medium, the laccase activity increased from 4170 U/L to 8618 U/L. By increasing the culture volume up to 1 L, laccase production on TMT was 9929 U/L. The yellow laccase (TmtLac) was purified from the supernatant TMT medium and has shown similar characteristics with the blue laccase (GluLac) purified from the GLU medium. Their apparent protein size was 63 kDa. Catalytic activities of the yellow form were not very different from those of the blue form, but specific activity of the purified yellow laccase produced on tomato waste was much higher. The K_m and V_m values for four substrates, ABTS, DMP, guaiacol, and pyrogallol were almost similar for both isoenzymes. The optimum pH and temperature were respectively 4.0 and 50 °C. Although the level of glycosylation is clearly different, the thermostability of TmtLac and GluLac are quite similar. TmtLac is even slightly more tolerant at 60 °C for 24 h than GluLac. Moreover TmtLac showed greater stability at alkaline pH after 24 h compared to that of GluLac.We demonstrate that activity of the yellow TmtLac is not significantly affected compared to the blue laccase and that tomato waste is a simple and interesting lignocellulosic substrate to the laccase producer Trametes sp.

Laccase: Various types and applications

Laccase belongs to the polyphenol oxidase family and is very important in removing environmental pollutants due to its structural and functional properties. Recently, the ability of laccase to oxidize phenolic and nonphenolic substances has been considered by many researchers. This enzyme's application scope includes a broad range of chemical processes and industrial usages, such as bioremediation, nanobiotechnology, woodworking industries, bleaching of paper pulp, dyeing in the textile industry, biotechnological uses in food industries, biorefining, detoxification from wastewater, production of organic matter from phenolic and amine substrates, and biofuels. Although filamentous fungi produce large amounts of laccase, high-yield industrial-scale production of laccase is still faced with many problems. At present, researchers are trying to increase the efficiency and productivity and reduce the final price of laccase by finding suitable microorganisms and improving the process of production and purification of laccase. This article reviews the introduction of laccase, its properties, production processes, and the effect of various factors on the enzyme's stability and activity, and some of its applications in various industries.

Microaerobic conditions enhance laccase production from Rheinheimera sp. in an economical medium

Statistical optimization of aeration conditions viz. aerobic, microaerobic and anaerobic, was performed using response surface methodology (RSM) utilizing soybean meal as medium to enhance the production of laccase from Rheinheimera sp. Maximum laccase yield (18.48 × 10⁵ U/L) was obtained under microaerobic (static) conditions sustained for 12 h in tandem with 26 h aerobically (150 rpm) grown culture, which was 17.03-fold higher than laccase production in the starting M162 medium under aerobic conditions (150 rpm). The reduction in incubation time from 72 to 38 h and utilization of cost-effective soybean meal as medium, which is easily available from local market, have provided a promising, eco-friendly method of laccase enzyme production. Enhanced expression of laccase gene under microaerobic conditions corresponded to the increased expression of fnr (fumarate nitrate reductase) gene, the oxygen sensing global regulator. The putative FNR-binding site upstream of laccase transcription initiation site was predicted to play an imperative role in Rheinheimera sp. adaptation from aerobic to microaerobic conditions and for enhanced laccase production.

Preparation and Characterization of High Mechanical Strength Chitosan/Oxidized Tannic Acid Composite Film with Schiff Base and Hydrogen Bond Crosslinking

Chitosan-based composite films with good biodegradability, biocompatibility, and sustainability are extensively employed in the field of food packaging. In this study, novel chitosan/tannic acid (CTA) and chitosan/oxidized tannic acid (COTA) composite films with excellent mechanical and antibacterial properties were prepared using a tape casting method. The results showed that, when 20% tannic acid (TA) was added, the tensile strength of the CTA composite film was 80.7 MPa, which was 89.4% higher than that of the pure chitosan (CS) film. TA was oxidized to oxidized tannic acid (OTA) with laccase, and the phenolic hydroxyl groups were oxidized to an o-quinone structure. With the addition of OTA, a Schiff base reaction between the OTA and CS occurred, and a dual network structure consisting of a chemical bond and hydrogen bond was constructed, which further improved the mechanical properties. The tensile strength of 3% COTA composite film was increased by 97.2% compared to that of pure CS film. Furthermore, these CTA films with significant antibacterial effects against Escherichia coli (E. coli) are likely to find uses in food packaging applications.

Laccase production from Bacillus aestuarii KSK using Borassus flabellifer empty fruit bunch waste as a substrate and assessing their malachite green dye degradation

AIMS

The lignocellulosic waste, Borassus flabellifer empty fruit bunch waste (BFEFBW), was employed to produce laccase using Bacillus aestuarii KSK under solid-state fermentation (SSF) conditions and to assess the efficiency of malachite green (MG) dye decolourization.

METHODS AND RESULTS

Abiotic factors such as pH (5.0-9.0), temperature (25-45°C) and incubation time (24-96 h) were optimized using Response surface methodology-Box-Behenan Design (RSM-BBD) to exploit the laccase production. The anticipated model revealed that the highest laccase activity of 437 U/ml shows after 60 h of incubation at 35°C at pH 7.0. The bacterial laccase was used to remove 89% of the MG dye in less time.

CONCLUSION

The laccase from B. aestuarii KSK decolorizes the MG and thereby making it a suitable choice for wastewater treatment from industrial effluents.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study is the first report on the production of laccase from B. flabellifer empty fruit bunch waste as a substrate. Bacillus aestuarii KSK was isolated from the soil sample and used to produce laccase under SSF conditions. The bacterial laccase has the potential for industrial application in textile waste dye treatment.

Decolourisation of textile dye by laccase: Process evaluation and assessment of its degradation bioproducts

Biodegradation of environmentally hazardous synthetic dyes by enzymes has been achieved the highest interest in recent years. In this work, we optimized Remazol Brilliant Blue R (RBBR) dye biodegradation by Arthrographis kalrae derived laccase via the Box-Behnken design (BBD) approach of the surface response methodology (RSM). Optimization of dye decolourisation by one variable at a time (OVAT) approach resulted in optimal dye decolourisation at laccase dose (2 IU mL^-1), pH (7.0), temperature (35 °C), incubation time (240 min), and initial dye concentration (100 mg L^-1). The optimized process through BBD enhanced dye decolourisation (97.18%). Fourier Transform Infrared Spectroscopy and UV-Visible Spectrophotometry have proven biodegradation. In addition, in comparison to untreated samples, the laccase-treated dye sample showed relatively less phyto- and cytotoxic effect on Allium cepa L. Extra Precision Glide docking exhibited the binding affinity score of -5.355 kcal mol^-1, between laccase-RBBR complex.

Enzyme-assisted bioremediation approach for synthetic dyes and polycyclic aromatic hydrocarbons degradation

Environmental protection from emerging pollutants has become a significant challenge for mankind as an increasing number of contaminants, including synthetic dyes and polycyclic aromatic hydrocarbons (PAHs), represent a serious risk to ecological and environmental balance. Most synthetic dyes have complex aromatic structures and are resistant to degrade by classical approaches, such as physical and chemical processes, including adsorption, chemical coagulation, flocculation, ion exchange, membrane separation, froth flotation, and reverse osmosis. Enzymes-assisted catalytic transformation of pollutants has become a potential alternative to classical methods because of their ability to react with complex compounds, a quick degradation rate, and producing less harmful by-products. Plant peroxidases, and microbial laccase and lignin-degrading peroxidases (manganese and lignin peroxidase) have gained significant attention for treating aromatic waste due to their capability of oxidizing and detoxifying a wide range of recalcitrant xenobiotics, including PAHs and synthetic dyes. Peroxidases being efficient biocatalysts detoxify an array of toxic compounds by simple free-radical mechanism resulting in the formation of oxidized and depolymerized products of significantly reduced toxicity. Moreover, it is an ecofriendly and economically favorable approach towards the biodegradation of recalcitrant and toxic industrial waste. Among microbial and plant peroxidases, bacterial enzymes have broad substrate specificity and can transform a wide range of recalcitrant substrates. Ligninolytic enzymes oxidize the aromatic ring into quinones and acids by producing free hydroxyl radicals instead of dihydrodiols and mineralize aromatic hydrocarbon in combination with cytochrome P450, monooxygenases, and epoxide hydrolases. In the review, an attempt has been made to provide detailed knowledge about the availability of inexpensive peroxidases sources, their mechanism of action, and degradation potential. The present review summarizes the exploitation of peroxidases from plants, bacteria, and fungus (manganese peroxidase, lignin peroxidase, and laccases) for detoxification and degradation of textile dyes as well as PAHs. Conclusively, peroxidases have great potential to react with almost all classes of synthetic dyes and most PAHs due to broad substrate specificity and transformed them into less harmful metabolites.

Isolation and Screening of Microorganisms for the Effective Pretreatment of Lignocellulosic Agricultural Wastes

Lignocellulosic waste is the most abundant biorenewable biomass on earth, and its hydrolysis releases highly valued reducing sugars. However, the presence of lignin in the biopolymeric structure makes it highly resistant to solubilization thereby hindering the hydrolysis of cellulose and hemicellulose. Microorganisms are known for their potential complex enzymes that play a dominant role in lignocellulose conversion. Therefore, the current study was designed to isolate and screen potential microorganisms for their selective delignification ability for the pretreatment of lignocellulosic biomass. An extensive isolation and screening procedure yielded 36 desired isolates (22 bacteria, 7 basidiomycete fungi, and 7 filamentous fungi). Submerged cultivation of these desired microorganisms revealed 4 bacteria and 10 fungi with potent lignocellulolytic enzyme activities. The potent isolates were identified as Pleurotus, Trichoderma, Talaromyces, Bacillus, and Chryseobacterium spp. confirmed by morphological and molecular identification. The efficiency of these strains was determined through enzyme activities, and the degraded substrates were analyzed through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Among all isolated microbes, Pleurotus spp. were found to have high laccase activity. The cellulose-decomposing and selective delignification strains were subjected to solid-state fermentation (SSF). SSF of field waste corn stalks as a single-carbon source provides Pleurotus spp. better condition for the secretion of ligninolytic enzymes. These isolated ligninolytic enzymes producing microorganisms may be used for the effective pretreatment of lignocellulosic agricultural wastes for the production of high value-added natural products by fermentation.

Characterization of a Potential Isozyme Laccase from Trametes polyzona MPS1-3 and its Contribution to Palm Oil Mill Effluent Treatment

The high phenolic content of Palm Oil Mill Effluent (POME) constitutes an environmental concern. In this study, laccase producing microorganisms were isolated from POME samples collected in Côte d'Ivoire for their possible use in POME treatment. Strain showing the highest laccase activity was identified by ITS1-5.8S-ITS2 region sequencing as Trametes polyzona. A maximum laccase production (156.3 U/mL) was obtained after 10 days of incubation under shaking condition, at 37 °C, pH 4, with starch (1%), tryptone (0.3%) and 10 mM of guaiacol. The partially purified laccase of 31 kDa exhibited maximum activity at 50 °C and pH 4.5 with a Km for guaiacol and Vmax of 0.7 mM and 0.04 mM/min, respectively. Metals, SDS and EDTA did not inhibit his activity. Used as biotreatment agent, T. polyzona MPS1-3 reduced COD, total suspended solids, total solids and total phenolics by 16.03%, 70.15%, 38.9%, 50.84%, respectively, for sterilized POME and by 13.09%, 58.07%, 36.53%, 42.05% for unsterilized POME. These results showed the promising application of T. polyzona for bioremediation of phenolics compounds in wastewater and it potentially useful in several other biotechnological applications.

Characterization of a thermostable and solvent-tolerant laccase produced by Streptomyces sp. LAO

OBJECTIVES

Decaying wood samples were collected, and actinomycetes were isolated and screened for laccase production. The identity of the efficient laccase-producing isolate was confirmed by using a molecular approach. Fermentation conditions for laccase production were optimized, and laccase biochemical properties were studied.

RESULTS

Based on the 16S rRNA gene sequencing and phylogenetic analysis, the isolate coded as HWP₃ was identified as Streptomyces sp. LAO. The time-course study showed that the isolate optimally produced laccase at 84 h with 40.58 ± 2.35 U/mL activity. The optimized physicochemical conditions consisted of pH 5.0, ferulic acid (0.04%; v/v), pine back (0.2 g/L), urea (1.0 g/L), and lactose (1 g/L). Streptomyces sp. LAO laccase was optimally active at pH and temperature of 8.0 and 90 °C, respectively, with remarkable pH and thermal stability. Furthermore, the enzyme had a sufficient tolerance for organic solvents after 16 h of preincubation, with laccase activity > 70%. Additionally, the laccase maintained considerable residual activity after pretreatment with 100 mM of chemical agents, including sodium dodecyl sulphate (69.93 ± 0.89%), ethylenediaminetetraacetic acid (93.1 ± 7.85%), NaN₃ (96.28 ± 3.34%) and urea (106.03 ± 10.72%).

CONCLUSION

The laccase's pH and thermal stability; and robust catalytic efficiency in the presence of organic solvents suggest its industrial and biotechnological application potentials for the sustainable development of green chemistry.

Optimization and kinetic modeling of Trametes maxima IIPLC-32 laccase and application in recalcitrant dye decolorization

Enhanced laccase production by the Trametes maxima fungus and its use for decolorization of the textile dye RBBR.

Screening of five marine-derived fungal strains for their potential to produce oxidases with laccase activities suitable for biotechnological applications

BACKGROUND

Environmental pollution is one of the major problems that the world is facing today. Several approaches have been taken, from physical and chemical methods to biotechnological strategies (e.g. the use of oxidoreductases). Oxidative enzymes from microorganisms offer eco-friendly, cost-effective processes amenable to biotechnological applications, such as in industrial dye decolorization. The aim of this study was to screen marine-derived fungal strains isolated from three coastal areas in Tunisia to identify laccase-like activities, and to produce and characterize active cell-free supernatants of interest for dye decolorization.

RESULTS

Following the screening of 20 fungal strains isolated from the harbors of Sfax and Monastir (Tunisia), five strains were identified that displayed laccase-like activities. Molecular-based taxonomic approaches identified these strains as belonging to the species Trichoderma asperellum, Stemphylium lucomagnoense and Aspergillus nidulans. Among these five isolates, one T. asperellum strain (T. asperellum 1) gave the highest level of secreted oxidative activities, and so was chosen for further studies. Optimization of the growth medium for liquid cultures was first undertaken to improve the level of laccase-like activity in culture supernatants. Finally, the culture supernatant of T. asperellum 1 decolorized different synthetic dyes belonging to diverse dye families, in the presence or absence of 1-hydroxybenzotriazole (HBT) as a mediator.

CONCLUSIONS

The optimal growth conditions to produce laccase-like active cell-free supernatants from T. asperellum 1 were 1.8 mM CuSO₄ as an inducer, 1% NaCl to mimic a seawater environment and 3% sucrose as a carbon source. The culture supernatant of T. asperellum 1 effectively decolorized different synthetic dyes belonging to diverse chemical classes, and the presence of HBT as a mediator improved the decolorization process.

Laccase Properties, Physiological Functions, and Evolution

Discovered in 1883, laccase is one of the first enzymes ever described. Now, after almost 140 years of research, it seems that this copper-containing protein with a number of unique catalytic properties is widely distributed across all kingdoms of life. Laccase belongs to the superfamily of multicopper oxidases (MCOs)—a group of enzymes comprising many proteins with different substrate specificities and diverse biological functions. The presence of cupredoxin-like domains allows all MCOs to reduce oxygen to water without producing harmful byproducts. This review describes structural characteristics and plausible evolution of laccase in different taxonomic groups. The remarkable catalytic abilities and broad substrate specificity of laccases are described in relation to other copper-containing MCOs. Through an exhaustive analysis of laccase roles in different taxa, we find that this enzyme evolved to serve an important, common, and protective function in living systems.

Stability of Selected Hydrogen Bonded Semiconductors in Organic Electronic Devices

The electronics era is flourishing and morphing itself into Internet of Everything, IoE. At the same time, questions arise on the issue of electronic materials employed: especially their natural availability and low-cost fabrication, their functional stability in devices, and finally their desired biodegradation at the end of their life cycle. Hydrogen bonded pigments and natural dyes like indigo, anthraquinone and acridone are not only biodegradable and of bio-origin but also have functionality robustness and offer versatility in designing electronics and sensors components. With this Perspective, we intend to coalesce all the scattered reports on the above-mentioned classes of hydrogen bonded semiconductors, spanning across several disciplines and many active research groups. The article will comprise both published and unpublished results, on stability during aging, upon electrical, chemical and thermal stress, and will finish with an outlook section related to biological degradation and biological stability of selected hydrogen bonded molecules employed as semiconductors in organic electronic devices. We demonstrate that when the purity, the long-range order and the strength of chemical bonds, are considered, then the Hydrogen bonded organic semiconductors are the privileged class of materials having the potential to compete with inorganic semiconductors. As an experimental historical study of stability, we fabricated and characterized organic transistors from a material batch synthesized in 1932 and compared the results to a fresh material batch.

Ligninolytic enzymes: Versatile biocatalysts for the elimination of endocrine-disrupting chemicals in wastewater

Direct municipal wastewater effluent discharge from treatment plants has been identified as the major source of endocrine‐disrupting chemicals (EDC) in freshwaters. Consequently, efficient elimination of EDC in wastewater is significant to good water quality. However, conventional wastewater treatment approaches have been deficient in the complete removal of these contaminants. Hence, the exploration of new and more efficient methods for elimination of EDC in wastewater is imperative. Enzymatic treatment approach has been suggested as a suitable option. Nonetheless, ligninolytic enzymes seem to be the most promising group of enzymes for EDC elimination, perhaps, owing to their unique catalytic properties and characteristic high redox potentials for oxidation of a wide spectrum of organic compounds. Therefore, this paper discusses the potential of some ligninolytic enzymes (laccase, manganese peroxidase, and versatile peroxidase) in the elimination of EDC in wastewater and proposes a new scheme of wastewater treatment process for EDC removal.

Production of Laccase by a New Myrothecium verrucaria MD-R-16 Isolated from Pigeon Pea [Cajanus cajan (L.) Millsp.] and its Application on Dye Decolorization

The present study was conducted to screen a laccase-producing fungal endophyte, optimize fermentation conditions, and evaluate the decolorization ability of the laccase. A new fungal endophyte capable of laccase-producing was firstly isolated from pigeon pea and identified as Myrothecium verrucaria based on a ITS-rRNA sequences analysis. Meanwhile, various fermentation parameters on the laccase production were optimized via response surface methodology (RSM). The optimal fermentation conditions were a fermentation time of five days, temperature 30 °C and pH 6.22. Laccase activity reached 16.52 ± 0.18 U/mL under the above conditions. Furthermore, the laccase showed effective decolorization capability toward synthetic dyes (Congo red, Methyl orange, Methyl red, and Crystal violet) in the presence of the redox mediator ABTS, with more than 70% of dyes decolorizing after 24 h of incubation. Additionally, the activity of laccase was relatively stable with pH (4.5-6.5) and a temperature range of 35-55 °C. Therefore, the high laccase production of the strain and the new fungal laccase could provide a promising alterative approach for industrial and environmental applications.